Ipod touch wont turn on and itunes wont detect.HELP!!!!
Can anyone please help me after updated my ipod touch 8gb 1st or 2nd gen cant remember. when i plug it into my laptop, itunes pops up as normal and it says waiting for ipod then the ipod turns on no logo just a blank black screen but its on, after about 2/3 mins it turns off and then in itunes it says. itunes detects an ipod but cant identify it with error code (1602). it also has done the exact same thing but with a white blank screen. i have tried to hard reset by pressing the home button and the power button at the same time i have tried it while its been fully off with the white screen and with the black screen(but switched on) absolutely nothing. i have aslo tried dfu mode in all of them situations i named but still nothing. i have aslo tried to re install the driver manually by navigating to usbappl but i get the error windows found driver software for your device but encountered an error while attempting to install it and underneath that it says the device can not start(10) i have ran out of ideas and can not find anything else online the ipod is absolutely not jailbroken and was working perfectly fine before the update.
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section.
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Check for outdated or modified software
Similar Messages
-
ok so since about 2 weeks ago i have not be able to use my ipod touch. my cord broke and it died. took about 5 days for my cord to come in the mail.but when i got it my ipod wouldnt charge, or sync to my computer. i spent all day searching the web for answers. i uninstalled itunes 3 times, yes i checked apple mobile, spoted it started it restarted it. shut down my computer lots of times, used different usb ports and nothing. all i get is "This Usb Has Malfuctioned" i tried installing the drivers, but i got code 10 from windows and they wouldnt install. ive tried two other computers but i didnt have access to the adminastor account so i couldnt mess with any drivers. i force resotred it but when i plug it in nothing happens. and now i cant download itunes. everytime i try it freezes my computer and shuts down. so with no itunes i have no drivers and with no drivers i have no ipod. so does anyone know how to fix this or has had this problem before, because i have tried everything.
Did you try to remove all Apple related software and reinstall iTunes after that? This should give you all the needed drivers back. Removing iTunes, QuickTime, and other software components for Windows Vista and 7
Does your iPod charge if you're using the adapter?
Did you check your security software settings as well? iTunes for Windows: Troubleshooting security software issues -
IPod Touch Not Turning on and IS NOT Detected by iTunes!!!!
Hello, recently I bought the new iPod Touch 4g! It was all fine and working for about 12 days, but then it started getting really hot and the battery lasted less than an hour while listening to music. I took my iPod Touch in, and a genius told me it was a software problem and I had to do a clean restore (as a new iPod.) Since the clean restore, my iPod has been working fine... until this morning. I had it syncing with my Mac overnight, but when I came to turn it on... I got a black screen... nothing. I unplugged the iPod and tried to turn it on again, but I got no response! I tried plugging the iPod into my wall charger, but nothing happened! I finally gave up and plugged the iPod back into my Mac, but iTunes didn't do anything! HELP!!!!!
Since it does not charge anymore, there's no way that iTunes will recognize your device when the battery is empty. You're still under warranty, make an appointment at your next Apple Store and bring it in again.
-
I just bought my iPod Touch 4g earlier today and it wont connect to iTunes, the iPod icon is there and when I try to restore I always end up with an error code. (1611)
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
-
My ipod touch 4g turned off and when i try to turn it on it says its not charged. so i charge it and the apple screen comes up but stays frozen like that for a really long time, and then it just goes back to the "needs to be charged" screen. please help!
- First try resetting the iPOd. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-Next connect to a computer and restore the iPod if theiPod appears in iTunes.
- Next see if placing he iPod in recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
My iPhone is stuck in recovery mode, it wont turn off and itunes doesn't recognize my device
my iPhone is stuck in recovery mode, it wont turn off and itunes doesn't recognize my device
You'll have to put your phone in DFU mode and restore. Search this forum to find instructions on placing your phone in DFU
-
my ipod touch just turned off while i was using it and now it wont come back on no matter what i do. how can i fix this?
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
My iPod touch 4g turned off on a full battery and won't turn on. I tried to charge it and hold down the shut-down button but nothing seems to work. What is going on?
hey, yes i have the same problem and posted it, too.
Hopefully we get some answers, mate -
i was listening to pandora radio on my ipod touch and it jus turned off and went the screen went to the picture with cd of itunes sayig it needed to be connected and i plugged it in to restore it but it wont let me it says error and that its in recovery mode...?
Try kicking it out of recovery mode with RecBoot. If that does not work, restore it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I have just received a brand new IPOD Touch ,it will not turn on, i have connected it to my cmputer, it does not show that its charging and is not recognised in Itunes. I have tried the holding down the power and home buttons which also didnt work. Any Ideas Please ????
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT4113 how do i unlock my ipod that has been disabled and itunes wont open it
my daughter couldnt remember her passcode and now her ipod is disabled. I recently replaced my laptop and her ipod has never been synced on this computer so itunes wont open it either
IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
Please Get the iPod Touch User Manual for iOS 5 -
How do I fix my Ipod it wont turn on and it wont even charge
I put it down for a couple minutes when i came back to charge it it wont charge it will just stay black screen and when i try to turn it on it dosent show the symbol of the charger then the battery and i tryed the think where you push down the sleep and home for 10 seconds is there a different pattern for that.PLEASE HELP ME
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Please help me. ipod touch not turning on and not syncing with itunes!!!!
ok. so i tried to turn on my ipod touch and when i pressed the button on the top and the little square one on the bottom it didnt work. it was just a black screen. i tried holding down each button (seperatly and together) but it still didnt work. so i thought maybe plugging my ipod into itunes would work. but when i plugged it into itunes the ipod didnt even come up in the side bar thing, like it usually does. and the screen was still black.
please please please please please help metry putting your ipod touch into dfu mode by holding the sleep/wake button and home button for 10 seconds, then let go of the sleep/wake button (make sure it is connected to your computer) and continue to hold the home button for 10 to 15 seconds or until itunes reads it as an ipod touch in recovery mode that needs to be restored, if you need more help on this just go to youtube and type in dfu mode in the search field
-
My ipod wont turn on and nothing works! help!!!
My ipod just out of no were just stopped working and I don't know why. I have tried everything including the 5 Rs from the support site and nothing has worked. Everytime I plug my ipod into my computer, the battery symbol will show up and when I hold down the select and menu buttons the apple logo appears after like 6 seconds but then it goes to the sad ipod logo and after that it just turns off. I have repeatedly tried to reset and it just does the same thing over and over again. It goes apple logo to sad ipod logo and then off. I need help on what to do to fix it.
This exact thing happend to my iPod. I was listening to it one day, with a full battery, and it just turned off, and never worked again. I bought the Apple Protection Plan online because mine was out of warrenty. Then I sent it in to get it fixed. This is what I would suggest doing. But make sure there really is something wrong with it... they will charge you if you send it in and only the battery is dead or something. To send it in, go to support, and click on iPod + iTunes support, and on that page, in the first paragraph, there is a link to 'get service'. press that, and then request iPod service online. In a few days they will send you an empty box, and you send your iPod back to them in that same box.
-
Ipod Touch 8g Turns on and off by itself, ect **PLEASE HELP**
Hi, I have about a year old ipod touch and i accidently got the screen wet a while ago and I think it may be broken.
It turns on and off by itself
Volume control on side wont increase If i make it increase, it decreases the volume
Ipod Touch takes random screen pictures
The calibration I think is off, I will click on one app and it goes to another app close to it
Ect.
PLEASE HELP its been a couples weeks
Message was edited by: chandler5Have you tried:
- drying by:
http://www.ehow.com/how5356376fix-wet-ipod-iphone.html
- After it is dry try restoring it via iTunes, first from backup and if still problems then to factory default/new iPod.
Maybe you are looking for
-
I upgraded my iTunes to 10.7, after that iTunes doesn't recognize my iPhone 4S 6.0.1 (10A523) in the iTunes sidebar. Solutions?
-
How can I get Adobe Bridge to show XMP metadata using Adobe Drive 4 CMIS Connector?
I have successfully connected to an Alfresco Enterprise Edition 4.1.0 repository, using the Adobe Drive 4, created a test folder and uploaded a jpeg file containing XMP metadata into it. When I view the image's metadata (using Adobe Bridge), I observ
-
How to seperate vendor payment advice form/customer payment advice form?
Hi all, i was wondering if you could create a seperate payment advice form for vendors and customers. I used transaction code SE71 to visualize forms. Examples of payment forms for each company code can be found in customization "allocate forms to pa
-
Use of Database Studio Community Edition with SAP applications
I am using SAP ECC6.0 on MaxDB 7.6.04.012 running on Linux x86_64. For database admin, and adhoc sql queries, I am currently using Database Studio 7.7.04.26, running on Windows XP. I have had one or two issues with Database Studio, and I've been look
-
Hi there, Well, it is mysterious - not to say frightning ! When I first start my tomcat I get an Exception like:; Could not load com.sun.xml.messaging.saaj.soap.Envelope The second time it runs well. No Exception about classloading. And the app is ni