Ipod troubles after 1.3 upgrade

I connected my 60gb ipod to itunes. I installed the firmware 1.3 update on my ipod. After that, my ipod went into disk mode on its own, and a pop-up said I needed to restore my ipod with itunes. I restored it.
Now the tracks (encoded at m4a 256 bitrate) only play one minute or so, and move on to the next track. My ipod is not in shuffle mode, but this is very annoying. I have had my ipod for two years (as of next week), so I don't know if the battery indicator could be wrong, and it's really lower than it shows?
I that other people having the same problem with songs skipping. Is this a bug of the 1.3 update?

I had the same problem with both 1.2.3 and 1.3 upgrades. Both times I was able to successfully downgrade to 1.2.1, and that fixed the problem. (I don't have the details on the downgrade process, but there have been several messages here about that recently.)

Similar Messages

  • Xserver troubles after 11/06 upgrade

    After 11/06 upgrade, changes in X seem to preclude 1600x1200x24.
    System is a K8M based ASUS / AMD64 dual core, with VIA Unichrome S3
    I have a Nokia 445Xi monitor.
    This has been supported since solaris 9 at least. It now only works in 1024x768 mode.
    I suspect this is due to the reorganization in the /usr/X11 tree. Something just got left out, I suppose. Specifically, it seems that the X configuration now thinks the monitor isn't compatible.

    Maybe during mogration some settings were incorrect, you should try to configure with kdmconfig.

  • Problem w/ classic mini iPod sync after ios 6 upgrade

    My original iPod mini won't sync to iTunes after I upgraded to ios 6.  My iPhone and iPad are syncing fine but the mini, which is connect via USB, won't even show up in iTunes to begin the sync.  Any ideas on how I can get it to sync?  It has capacity, I've got new music purchased from iTunes but can't get it on the mini.  I've been doing it the same way for years and now it won't work.  Any help great appreciated.
    Helen

    Are you sure its an iPod Mini an not an iPod Touch?  The iPod mini doesn't run iOS.
    Identifying iPod models
    B-rock

  • Trouble after 3.0 upgrade: wifi, bluetooth and temperature

    I have an iPhone 3G.
    Today, after the 3.0 upgrade, the wifi and bluetooth stoped working.
    In preferences appear like a light gray color and don't allow access to adjustments.
    And the temperature of the iPhone body is very hot after the use.
    I reisntalled 3 times, but wiyjout success.
    I'm very sad. Is my iPhone dead?

    kido97 wrote:
    I do had very high confident to Apple products previously, but this update give me tons of trouble, I tried to "R e s t o r e", but do you know what restore means? It means restore my Apps, not my original iPhone with OS2.2.1.
    Frustrated hk user.
    No, restore will restore back to 3.0 as 2.2.1 is no longer available. I had a few problems with 3.0 but i restored it and set it up as a new iphone which made my iphone run SWEET. I would try that before you went to Apple. Going to the Genius battle is really a last resort after the restore. Hope it works.

  • Illustrator CS4 trouble after installing Lion upgrade

    "An unknown error has occurred" message when attempting to open Illustrator cs4 file after upgrading to Lion.
    I'm using a Mac Pro early 2008
    Processor  2 x 2.8 GHz Quad-Core Intel Xeon
    Memory  10 GB 800 MHz DDR2 FB-DIMM
    Graphics  NVIDIA GeForce 8800 GT 512 MB
    Software  Mac OS X Lion 10.7.2 (11C74)
    I have the entire CS4 Master Collection on this machine.
    Have not tried the other programs yet.
    Any help on easing this transition will be appreciated.

    Found this link: http://support.apple.com/kb/DL1421
    After downloading the Java for OS X Lion Update 1 Illustrator is now working.

  • Error deploying to iPod touch after 2.0 upgrade

    Been in the developer program a while and haven't had any problems with putting apps to my iPod touch until now. Downloaded the release version of the SDK, then I started having problems. Also have purchased release 2.0 software for the Touch and have it installed. When I try to Build | Go from Xcode, I get the following error:
    Your mobile device has encountered an unexpected error (0xE8000001) during the install phase: Verifying application.
    Anyone know what this might mean? First suspected the 2.0 software, now I'm starting to think more about certificates/profiles. XCode lists the device just fine as 5A347. Also has my provisioning profile checked.
    One other thing that is strange is in the Apple docs on Multiple Applications they just released, it mentions checking in Key Chain under the Keys category. I don't see anything related to this in that category. But I do still have certificates listed in the System keychain.
    I guess it is time to wipe out all the profiles again and start over. Any other ideas? Really what I'd like to see is a log file or something that gives me the real error, or at least the thing its trying to verify when it errors out.

    I had forgotten about that in my new App. Changing it didn't help though. Also, the app that I have successfully deployed to the device before (and is on the AppStore now) has the same error. And it's identifier was already set.
    Just for reference though, I'm setting my Identifier to the same thing that is listed in XCode under Organizer | Provisioning. And that is the same as listed under Name in the AppIDs section of the Program Portal. I also had used a * for the Bundle ID when I setup that AppID.
    Thanks for the thought. Don't think that is the problem though. At least changing it to the above didn't seem to have any affect.

  • IPod not recognized (for sync OR charging) after OS 4 upgrade

    I upgraded to OS4 on Saturday July 10th with no problems. On Sunday (July 11) I used my iPod quite a bit. I was at a friend's house and the battery was getting low so he charged it through his computer. It charged completely and we continued using it the rest of the day. I plugged it in to my PC to charge it Sunday night and it was not recognized at all (for charging OR for syncing) through any of the USB hubs. I asked my friend the method he used to charge it that day and he confirmed it was via computer. Monday night I tried charging it through a friend's iMac. It charged halfway, though it still wasn't recognized. Tuesday morning I tried to charge it on the same computer and I got the "too much power drawn from the USB hub - HUB deactivated" message on ANY of the HUBs. It still doesn't work on my own home computer (though it HAD been working Friday night and Saturday morning pre-OS4 installation).
    I'm personally running Ubuntu 10.04 but obviously only was able to charge the iPod on that system. Anytime I want to sync or download music I restart to Windows Vista (and iTunes).
    I do also have apps installed, but nothing new from the previous OS - (I know that blaming third party apps is a common cop-out answer for apple techs).
    I hope this wasn't too confusing. My real problem is simply described by my subject line: iPod not recognized (for sync OR charging) after OS 4 upgrade. What follows is simply everything I've done to troubleshoot. The only thing I haven't tried is restore...because my iPod isn't even recognized by iTunes.
    I would greatly appreciate any help or stories related stories/situations. Strength (and hopefully solutions) in numbers!
    Best,
    Dan

    Assuming you haven't got the cords mixed up with another, older iPod, it sounds like you have a couple of problems:
    1. Your computer's USB ports have quit working. Reboot your computer and see if they reactivate.
    2. Your friend's iMac generated that message because you tried to charge the device from the low power keyboard USB port. iPods need to be charged off one of the main USB ports or a powered hub.
    3. iPods not being recognized by iTunes can be caused by 1) wrong cable; 2) non-functioning USB ports; 3) iTunes not being the correct version for the iPod OS; and finally 4) Apple Mobile Device Services driver is either stopped, missing, or disabled.
    To troubleshoot a problem with Apple Mobile Device Services, see the Apple support article: http://support.apple.com/kb/TS1567

  • After the latest upgrade, I can't transfer my library audiobook cd's from my computer to my iPod so I can listen to the book. The book shows up on my computer, but not on my iPod.

    After the last upgrade, I can't transfer my library audiobook cd's from my computer to my iPod so that I can listen to the book. It seems to be transferring but
    doesn't show up on my iPod. How do I find the transferred files on my iPod Classic 60GB? Help! I've done this thousands of times before, and this is the 1st
    time I've had a problem, so I'm suspecting the upgrade.

    For non-purchased music like CD ripped songs, you need some third party software like sharepod, yamipod or iPod file manager to copy them from iPod back to computer. if you need details, here is a guide about how to copy iPod music. Hope it helps. Feel free to email me if you need further help.

  • Strange problem with my ipod 2g after upgrade to os 4.2

    Strange problem with my ipod 2g after upgrade to os 4.2
    the problem with volume some times when i switch on the ipod i hear the sound
    alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
    i hope i get help

    I would try in order:
    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backu via iTunes.
    - Restore the iPod to factory defaults/new iPod.

  • Ipod touch now frozen after trying to upgrade from 1st gen to 3.1.1

    I've got a 1st gen ipod touch and bought the upgrade software from i-tunes to upgrade it to 3.1.1 so I can add apps to my ipod touch. It started off well but then just froze!! My ipod touch has the apple logo and a progress bar which is partly completed. I left it for ages and nothing progress and when I checked Itunes it said it was no longer responding. I shut itunes down and tried to restart it but it just keeps saying its not responding. Any idea on what I can do to get my Ipod touch back to 1st gen or to complete the upgrade to 3.1.1?

    - Try resetting the iPod;
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next connect to computer and try to restore via iTunes- Next see if placing the iPod in recovery mode will allow a restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    - If you can't turn the iPod off (e.g., logo, spinning wheel) always shows, let the battery fully drain.  After charging for an hour try the above again.

  • Mail is giving me trouble after upgrading to OS X 10.10

    Mail is giving me trouble after upgrading to yosemite. I am unable to enter settings and change email settings. Can someone please help.

    I have had the same issue (and I've seen many posters on here mention this, as well). I have an external FireWire drive that, since upgrading to 10.4.9 is not recognized by my G4 PowerBook. It worked fine before the update. Some have said the issue may have occurred if the drive was connected to the computer at the time of the upgrade but mine was not. I'm patiently waiting Apple to fix this and many other apparent flaws with the latest so-called "upgrade."
    P.S. I have never had any issues with previous OSX updates and have been a Mac user for 3+ years.

  • Ipod sync error "copy disk failed..read or written to" after 7.3 upgrade

    This happened immed. after 7.2 upgrade and it "magically" went away after about a week. Now, after 7.3 it is happening again. It will only sync up a few songs at a time, a podcast here an there, before giving the error message. Got rid of any potentially corrupt files, tried other usb ports, did a restore, did everything recommended for this error message. This is 5th gen video ipod on a g5. Why does this keep occurring after iTunes upgrades, and what to do about it?

    i just got a 30gig and was trying to load it with
    music and getting the same message. what finally
    worked was unhooking a usb hub and just hooking only
    the ipod and keyboard to the back of the pc. now i
    have to figure out how to get the rest of my usb
    equipment hooked back up so it won't interfer with
    the ipod.
    Try a powered USB hub...

  • Trouble with wifi after IOS 6 upgrade

    I have an iPhone 4 and successfully installed iOS 6 today.  I am having trouble getting on my home wifi.  When asked to join my network, I click on it and type in my password.  Shortly after typing in my correct password an apple.com login page loads from the bottom of the iPhone but says "hmm, the page you're looking for cant be found".  The only option I have is to push cancel and then it ends my wifi connection with my own home network.  Help please. 

    burhansheikh replied to Trouble with wifi after IOS 6 upgrade
    "guys i have 100% solution copy Wi-FI address from about(general)(setting) & paste to Client ID in your network (Wi-FI) (setting)"
    in Using iPhone • 8 replies
    1

  • Big trouble after upgrade 10.10 and 4.0: No sync Calendar and Contacts between devices and users

    Hello,
    it is a big trouble after upgrade 10.10. an 4.0 (i paid 18 € again!):
    After the update no sync between devices an user for calendar and contacts possible. Asking a password?
    No device manger started. Error code -1!; Open Directory Service no started.
    Help?

    I ended up exporting all the outlook data to CSV, creating a new PST and reimporting the data. Calendar sync now works, but I sure do hope I don't have to redo this every week.

  • HT1454 why i can not get video out from my ipod touch after i did the upgrade

    why i can not get video out from my ipod touch after i did the upgrade

    why i can not get video out from my ipod touch after i did the upgrade

Maybe you are looking for