IPod Updater 2006-06-28 Software Version 1.1.2 causes video lock up

My 5th generation iPod was working fine until I loaded this update. I had it spontaniously reset twice in a row while playing two different video podcasts. The last 3 videos I've tried will cause it to just lock up after a minute or so and I have to reset it.
Is there a way to go back to software version 1.1.1 without restoring back to factory defaults? It would take over a day to reload 50GB back to my iPod over a USB 1 connection. Is there any other fix to this reset and lock up problem?

Same thing happened to me (well my 30gb video iPod XD) And to a lot of people, apparently. My iPod has been comatose (I REFUSE to say it's dead) since Monday after the iPod Update. It's NEVER had problems before, so I lay the blame on the Update. It took forever to "update" (I had it in for hours) and when I finally dced it (prematurely apparently?? I don't know how leaving it in a couple hours and then taking it out makes it premature but okay iPod Updater...) it flashed to the Apple screen, which I then reset, and now it's in its comatose state
I have really nothing to contribute but to say it's happened to me, too XD I've had no luck at other threads so if anyone could help, it would be much appreciated Thanks

Similar Messages

  • IPod Updater 2006-06-28 killed 2GB Nano and a 30GB Video iPod

    Both were bought in december 2005, I was impressed as they both have worked totally perfect until Monday, plugged fully charged hardley used 30GB Video into front USB on a G5 1.6, iTunes booted and a box appeared saying iPod needed update, so I clicked ok, it then said update was succesful. iPod rebooted, Mac an iTunes no longer recognised the iPod? so I did a reset, this sorted the problem and it seemed to work fine. My daughter then wanted to plug in her Nano, so she did, I unplugged the 30GB as it was fully charged and turned it off , plugged in the nano an thought it was ok to also update, the update worked fine and rebooted straight onto the desktop an also in iTunes, we left it to recharge fully before ejecting an turning off. I then plugged the 30GB back into USB, Mac/iTunes would not recognise again? Tried to complete the 5Rs managed the first 4 but as I could not mount the iPod, I could not Restore! Tried on Powerbook, nothing apart from no charge icon! but it would no longer charge and was totally flat without any use? plugged it in to wall charger for 3 hrs, would turn on but straight away said that the iPod needed charging? Then my daughter said she could not turn Nano on, this is now totally and completely dead? nothing at all happens even when plugged into wall socket? this is too much to be a coincidence, it must be the update that has somehow fried the batteries? they are both still under warrenty so I have ordered support online and Im waiting for my boxes, but I just would like to know if anyone else out there has had simular problems? or if anyone can shine any light or information about this? I have been a total Machead for 16 years but this has just cast a shadow on my experience! :-|

    I too have had almost the identical problem. I did the update and the next time I plugged the Ipod in a lot of my library was missing and I received a corrupt database error message. I have tried everything conceivable to restore my Ipod video 30 GB but It keeps locking up. I occasionally will get it to boot up but it will only stay on for a maximum of about 3 minutes and then locks up. I have tried the 5R's and tried putting it in disk mode. I have tried the diagnostic mode which also locks up. Most of the time I get a message after resetting the ipod that I need to restore using iTunes and then it shuts off. The only way I can turn on the thing in the first place is by doing a reset. I think Apple has some explaining to do. I have seen quite a few posts of the same problem which seems to be attributed to the update. I suppose that I will be sending mine in for service. Probably would be a good idea to call customer service first, even though they probably will charge me for the call.

  • Can't Make iPod Updater 2006-01-10 Inactive Within Software Update

    Hello team,
    I've been setting up a graphite CRT iMac at my school here with OS X Jaguar, and in running various Software Update installs, I've discovered the "flaw" I listed in the subject line. Namely, that no matter how many times I attempt to do so, I cannot make the iPod Updater 2006-01-10 inactive. I have literally tried to do so about 20 times (after nearly ever other software update install/reboot), but each time I launch Software Update, the damned iPod Updater reappears in the list. Any idea what's going on here or how to prevent it from showing up anymore? Thanks a heap in advance for your feedback!
    Electronically yours,
    Erik Dahlin
    School-based Tech Specialist
    Churchill Road ES
    Graphite CRT iMac   Mac OS X (10.2.x)   768MB RAM, 80GB HD

    Actually, I have been able to make three other SU updates inactive (Bluetooth 1.3.3, iSight Updater 1.0.2 and iPod Driver 3.1) and they DON'T reappear each time I launch Software Update. ONLY the aforementioned iPod Updater 2006-01-10 continues to reappear, despite the repeated attempts to make it inactive. So, obviously something else is afoot here. I continue to welcome any suggestions or ideas.
    Electronically yours,
    Erik

  • Nano Backlight (Hold-Menu) no longer working after iPod Updater 2006-01-10

    After updating my 4gb black iPod Nano to software v1.1 via the iPod Updater 2006-01-10, I can no longer enable the backlight by holding down the menu button. Now when the menu button is pressed and held for a second or two it actually returns to the home screen. Feature or bug? The backlight does work if I set it to turn off in 2 Seconds via the Settings->Backlight Timer menu so I know the hardware is still ok. In practice, I usually leave the backlight off to conserve battery and temporarily enable it via the hold menu procedure when needed. Any others experiencing this same problem?
    Pb 12/1.5/80GB/1.25GB/BT2.0   Mac OS X (10.4.3)  

    I'd be willing to bet that Apple considers the
    updated behavior to be the "Correct" behavior.
    According to the Apple Nano Features Guide:
    "Turn on backlight - If the backlight timer is set to Off, press and hold Menu to turn on the backlight"
    I would argue that the issue I am experiencing after update is not the correct behavior. Every iPod made, save the shuffle, functioned this same way: hold the menu button for 1-2 seconds to enable backlight.

  • I have MacBook 4.1 laptop with a Version 10.5.8 software. Does this software version support iCloud? Can this MacBook be updated to the latest software version?

    I have MacBook 4.1 laptop with a Version 10.5.8 software. Does this software version support iCloud? Can this MacBook be updated to the latest software version?

    Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store.  The price is $19.99.
    Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
    As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • HT4623 What would happen if i don't update my ios to the latest software version? Will it cause my iphone to malfunction?

    I have been experiencing signal related concerns like connecting to 3g network eversince a new software update becomes available in the settings notification. I didn't update to the latest software version because i find it time consuming and tedious. What will happen now if i refused to update my iphone software, will it cause my device to not work properly? Kindly enlighten me, thank you!

    No, you can ignore it for as long as you like, but it sounds as though your phone is already not working properly. Though the following updates do not specifically address your concern it is possible that it could help.
    About iOS 5.1 Software Update
    This update contains improvements and bug fixes, including:
    Japanese language support for Siri (availability may be limited during initial rollout)
    Photos can now be deleted from Photo Stream
    Camera shortcut now always visible on Lock Screen for iPhone 4S, iPhone 4, iPhone 3GS and iPod touch (4th generation)
    Camera face detection now highlights all detected faces
    Redesigned Camera app for iPad
    Genius Mixes and Genius playlists for iTunes Match subscribers
    Audio for TV shows and movies on iPad optimized to sound louder and clearer
    Podcast controls for playback speed and a 30 second rewind for iPad
    Updated AT&T network indicator
    Addresses bugs affecting battery life
    Fixes an issue that occasionally caused audio to drop for outgoing calls
    About iOS 5.1.1 Software Update
    This update contains improvements and bug fixes, including:
    Improves reliability of using HDR option for photos taken using the Lock Screen shortcut
    Addresses bugs that could prevent the new iPad from switching between 2G and 3G networks
    Fixes bugs that affected AirPlay video playback in some circumstances
    Improved reliability for syncing Safari bookmarks and Reading List
    Fixes an issue where 'Unable to purchase' alert could be displayed after successful purchase
    Just be aware there is no going back. iOS updates are one way only.

  • After runnin iPod Updater 2006-06-28 for my 2GB iPod Nano my computer froze

    I installed iTunes 6.0.5 and my 2GB iPod Nano was recognized... everything seemed OK. I then tried running iPod Updater 2006-06-28 and this is when my problems began. After running the Updater program my iPod froze during the update process. I had to shutdown my computer in order to stop the updater program. Upon restarting my computer, iTunes no longer recognizes my iPod and if I run the updater program again it continues to freeze or does not recognize my iPod. When I plug in my iPod, Windows recognizes my iPod but my computer becomes very slow. Please note that when my iPod is not connected to my computer it appears to be OK but all my data has been removed. The updater program also appears to have been successful in updating my iPod to v1.2.
    To try and resolve this issue I performed Apple's Five Rs and also followed Apples instructions for "iPod shows up in Windows but not in iTunes." Please see the links below for these procedures.
    http://www.apple.com/support/ipod/five_rs/
    http://docs.info.apple.com/article.html?artnum=93716
    Every attempt I have made has been unsuccessful and I am contemplating reinstalling Windows XP SP2. Can anyone help?
    MSI K8N Neo2 Platinum with AMD Athlon 3200+   Windows XP   2GB iPod Nano and iTunes 6.0.4.2

    same problem with my 4GB nano. I believe the updater is messed up, as all previous updaters work fine to restore for me (with a needed kill of the ipodservice.exe)

  • Any known problems with iPod Updater 2006-06-28?

    I was wondering if anyone's had any issues with their iPods since updating with the iPod Updater 2006-06-28.
    Thanks!

    I was a fool. I refrained from updating because I knew better than to try to fix something that isn't broken, but I was hungover and upset about the fact that whenever the headphones cord wiggles my ipod pauses. I was convinced for the split second in between two throbbing beats in my head that perhaps the new update would give me an option of shutting that aspect of the ipod off. Woe is me.
    Now 10 gb of my music is unavailable. The ipod just skips over it. It didn't delete the files, they're all still there, I just can't play them; not on the ipod nor on the computer (not original computer for ipod). In Itunes an exclamation point shows up in the first column whenever I try to play certain songs, but there is no information about what is wrong. If I go to info on these songs there is no entry for Profile: Channel: or Encoded With:, unlike the rest of my songs that still work.
    Any hope of recovery?

  • IPod Updater 2006-06-28 still says Don't Disconnect...

    Hello.
    This evening I tried updating the firmware of my iPod. Everything seemed to go ok. When this was finished, their still was the "do not disconnect" message on the screen of my iPod.
    I decided to try the restore button.
    iPod Updater 2006-06-28 now says: restoring done, wait till it is really done, don't disconnect the iPod.
    Now, this message is already on my screen for more than a hour. My question: is this ok and normal?
    (perhaps I have to say that my iPod wasn't charged completeley.)
    I hope someone knows something about this.
    iRubke

    Ok, you see the thing is, I'm only 13 and I have like
    no idea as to what I should do. and most of all, I
    don't really have a clue as to what you just said.
    I'm sorry if I'm bugging you, but I think what
    you're saying is that if I remove itunes and i
    reinstall it, all my songs will be there? This is
    so confusing. You know what? Thanks for your help
    anyway. I appreciate it.
    Okay Shorty1324, I have uninstalled and reinstalled iTunes i don't know how many times and my music files and folders have never been erased from my computer so you don't need to worry about that. However, if you do decide to uninstall iTunes again and think it may erase your music, try making a backup copy (not a CD) of your all music files and/or folders. meaning, make a totally new folder, save it somewhere on your hard drive or desktop where YOU know everything in it will not be harmed if iTunes decides to go ape (for lack of better words). if everything works according to plan, (meaning iTunes works without any problems) then your iTunes problem is solved. but keep the backup copy of your music in case something else goes wrong. hopefully this explanation helps you. i know it's hard to understand technical jargon but you will learn as you get older. no worries!
    30GB iPod with Video   Windows XP  

  • IPod Update 2006-06-28 taking too long

    I'm trying to update my iPod Nano using iPod Updater 2006-06-28 for Windows XP. I clicked on "Update" and waited for a while. I've been waiting for more than 30 minutes now and the update never ends... My iPod displays the message "Do not disconnect" and my computer says that it cannot interrupt the process right now. How long will I have to wait? I'm afraid to disconnect the iPod manually and damage it permanently? What can I do?
    Thanks a lot.
    Pentium III   Windows XP  

    I used Windows task manager to force iPod Updater to close and, after that, I used the feature "Safely remove USB hardware". My iPod restarted automatically and it's working fine now. The iPod system is up-to-date and it's being recognized by Windows XP and iTunes without a problem.

  • 5gen iPod not loading in iTunes or iPod updater 2006

    I just got this 5th gen iPod for christmas and I have just started having these problems. I plug the ipod into the computer and nothing happens -no load in iTunes and the updater doesn't read it.
    Just before this problem started happening the iPod would skip or freeze while playing songs. It would start out as just a delay of the song and the time reading would freeze but the song would keep playing. Then they would both freeze and I would have to restart it.
    I need all the help I can get -thanks

    iPod Updater 2006-01-10 has caused a lot of problems for a lot of people. If you were experiencing problems before you attempted to install the updater, I suggest you phone Apple's tech support and take advantage of their free within 90 days of purchase support. Or, if you have an Apple store near by, drop in and let them take a look.
    If you had no problems before attempting to install the iPod Updater 2006-01-10 I suggest that you post a "me too" message to the "Complete iPod Failure" thread from 1-23-1006 ( http://discussions.apple.com/thread.jspa?threadID=330396&tstart=0 ), with a description of the problems you are experiencing and what model iPod you own. That thread is an effort at consolidating discussion of this specific issue, as well as a collection of the myriad possible fixes available.
    Then phone Apple's tech support (1.800.275.2273) and let them know you've had a problem with the iPod Updater 2006-01-10.
    Choose menu selection #1, Technical Support, and talk the automated responder through your configuration.
    Good luck!

  • Smart Playlists are fixed with iPod Updater 2006-01-10

    Hello Podders, Resident Furball here...
    iPod Updater 2006-01-10 restores dynamic updating of Smart Playlists on the iPod
    iPod Updater 2005-06-26 disabled the onboard dynamic updating of Smart Playlists on iPods older than the Nano and Gen5. This feature can now be restored using iPod Updater 2006-01-10.
    We held lengthy debates about this issue on Discussions (here, here and here), as well as the iLounge thread that sparked a dedicated website.
    However, we are glad to confirm that the latest iPod Updater resolves this issue, as I was informed by email from Apple Level 2 Support, and as tested by some of our long-suffering Gen4 and Pod Photo users. The Apple KB article on Smart Playlists has also been updated.
    Since the threads that I started have now been locked down to reflect resolution, I'm posting this just to confirm that everything now appears to have been resolved, and I would like to thank everyone here on Discussions for their patience and excellent troubleshooting in diagnosing this problem. Thank you to everyone who posted Feedback, those of you who took the time to phone Apple, and also to Apple Level 2 Phone Support for their assistance in escalating this matter up to US Engineering.
    Happy Podding everyone!
    Kind regards,
    Gopha.

    Hello folks, Resident Furball again...
    Many folks have now reported that Smart Playlist functionality has been properly restored to the iPod.
    However, some folks have been reporting that Smart Playlists containing Podcasts are still coming to grief.
    From what I have seen reported, the firmwares prior to the Updater 2005-06-26 that broke Smart Playlists had the ability to dynamically update Podcast-containing Smart Playlists, but this functionality has not been restored in the latest 2006-01-10 that has fixed 'simple' Smart Playlists.
    I don't use Podcasts myself, so if you would like to know more, please refer to posts from Vibeeen and Tutackhamen who have described the continuing issue in detail.
    In the meanwhile, I have drawn the attention of Level 2 Support to these reports, and recommend that you continue to submit appropriate Feedback if you are affected by this quirk.
    Kind regards,
    Gopha.

  • BEWARE of iPod Updater 2006-01-10

    I just ran the iPod Updater 2006-01-10 on my iPod Photo and it erased the disk and made it unrecognisable to the OS. I then tried to run the iPod Updater 2006-01-10 on it and run restore, but it could not read the disk. So the iPod was DEAD. Luckily I had iPod Updater 2005-11-17 on my machine and it seems to be working.

    In response to the thread I created 24 hours ago consolidating discussion of this issue, Apple has locked the thread, locked me out of my former user name, and deleted my attempts to continue the discussion on this board. I can no longer post to these forums with the name "L3263827"!
    Apple seems to be dodging this issue, and I wanted users of the forums to be aware of their despicable behavior.
    Many of my previous posts have been deleted. If I disappear again keep the discussions up! Apple will not address this issue unless it is demonstrated that the updater has caused problems on a "significant number of units". Apple's position seems to be that the updater is "working" on "millions of units" and therefore those of us with problems are insignificant or irrelevant.
    After hours on tech support today they offered to repair my iPod without charge (as they should have offered from the beginning), or to send me a $100 coupon towards the purchase of a new unit (which I was apparently supposed to be honored to receive). I have had to address the lockout of my userID through different channels.
    Attention users with old iPods that are now paperweights: Report the problem! If we don't report the problem and prove the pervasive nature of this issue Apple has repeatedly stated they will ignore it!
    Check the old thread "Complete iPod Failure" ( http://discussions.apple.com/thread.jspa?threadID=330396&tstart=0 ) See how many users reported problems between 4pm and 9am! Don't let Apple steal your iPod and sell it back to you!
    I suggest users experiencing problems with iPod Updater 2006-01-10 now create new, individual "Me Too Updater 2006 - Username" threads with descriptions of their problems and models, rather than post to a single thread Apple can lock and ignore.

  • IPOD updater 2006-1-10, now no sound after video plays for a few seconds

    I installed the latest IPod updater 2006-1-10 and now all my movies will hang for a few seconds and then the sound stops working. If I forward through a few frames, the sounds comes back and repeats the same behaviour.
    Anyone have a fix or seen this before?

    iPod Updater 2006-01-10 has caused a variety of problems on multiple iPod models.
    I just spent an hour on the phone with tech support. They forwarded me to some higher level techs due to my extreme heat while recharging issue. They still seem unaware of the problem. I suggested they read the forums to see just how widespread the problem is. The tech I spoke with assured me she would pass the problem up through the ranks and check the forums, but she said they haven't had a lot of service calls on the issue.
    SO!
    I suggest that everyone post a "me too" message to the "Complete iPod Failure" thread from 1-23-1006 ( http://discussions.apple.com/thread.jspa?threadID=330396&tstart=0 ), with a description of the problems they are experiencing and what model iPod they own. That thread is an effort at consolidating discussion of this specific issue, as well as a collection of the myriad possible fixes available.
    Then phone Apple's tech support (1.800.275.2273) and let them know you've had a problem with the iPod Updater 2006-01-10.
    Choose menu selection #1, Technical Support, and talk the automated responder through your configuration.
    Hopefully we can at least bring the issue to their full attention and get them to pull the updater from the downloads so it doesn't ruin anyone else's day!
    Good luck!

  • I have 2 ipod touch's that both have frozen screens and will not reset or show up in itunes. They both froze after trying to update to the latest software version. How do I get them to work?

    I have 2 touch's that froze when trying to update to the latest ios version. Neither respond to restarting the devices. They are also not recognized in windows or itunes. How do I get these to work. I followed all of the instructions on  the apple website and they still don't work. I have verified that I have apple support for mobile devices installed in itunes and my version of itunes is 11.0.1. I am running windows 7 64bit with service pack 1 installed and all of my updates are current. Is anybody else having this problem with their apple devices?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Maybe you are looking for

  • Error in transaction code MB01

    Hi, While doing th goods receipt for a Purchase order in MB01 transaction code ,  I am getting error message as "Inconsistency between a document field and profitability segment number " Here account assignment category of PO is - All aux.acct.assgts

  • Select serial comm port in sub vi during run-time

    Hi, would like to be able to select the comm port (serial RS232) in sub vi to use in main vi during run time. How can I do this? Have tried and failed, for on startup an error occurs because I have not selected a port yet. An example would be invalua

  • Re installing photosho[ elements serial number not vaild

    Photoshop Elements 2 inadvertently deleted, re install from disc brings up a dialogue stating 'Serial Number is not valid' advice from Adobe Chat refer to forum.adobe Has anyone any idea how to proceed ? PastelPainter

  • Expanding Folders in "list" view mode.

    How can I expand as well as close folders when viewing them in the "list" view mode, all in one stroke as opposed to having to expand each folder one at a time?

  • Panel interface horizontal ruler not showing in code

    Hi I have just reinstalled Dreamweaver cs5 onto a new computer (pc), I have opened up an existing web page I am currently working on, only to find the horizontal ruler at the bottom of the code box is no longer showing as it was on the other computer