Ipod vid 60gb audio cuts after 32sec. of video

i have a movie on my 60gb 5th gen but the audio cuts out after 32 secs. but if i fastforward it comes back for another 32 seconds. the movie works fine on my computer. smaller videos work fine like wine

I'm having the same problem. The video is in MPEG-4 format and plays fine on the computer but has the same problem as you described when playing on the Ipod. It's very frustrating. I did see one posting that mentioned that the new update to 1.1.1 actually caused the problem. I tried to return to the previous version without restoring but alas, it does not work. So, I've restored my ipod back to the factory settings and am currently reloading over a 1000 files including a number of videos back on to my Ipod. I do wish Apple would at least allow you to return to the original software without erasing all the files - or that the update would actually be an improvement. I'll let you know if the restore worked or not... I was hoping to be able to play the DVD's smoothly. Otherwise, there's no point in converting.

Similar Messages

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

"No Audio Device" after uninstall onboard video

"No Audio Device" says WinXP Pro sp3's "Sound and Audio Devices Properties".
I think this started when I installed a first video card in my Presario SR1913WM motherboard's PCI-e slot.
Before installing the video card drivers, I took some advice to uninstall the onboard video.
Now I have no audio. Should I re-install the NVIDIA drivers for the motherboard's GeForce 6150 LE?
I figure if I do, then I can re-install the Realtek drivers; I uninstalled them today thinking I could install them as I did a couple years ago (but now MS Update isn't offering me any Realtek drivers).
And should I uninstall the listing in Device Manager for "AMD High Definition Audio Device" (I suspect this might be from the video card's drivers)?
Here are the SR1913WM specs.
This question was solved.
View Solution.

Hi:
I noticed on the specs you posted for your new video card, it has an HDMI out port, correct?
Well, what happened is your PC thinks you not only installed a new video card but also a new audio card and it disabled the onboard video and the onboard audio. You video card has an onboard HDMI audio chip (the AMD HD audio is for the HDMI).
So, all you need to do is go into the BIOS, and find the onboard audio setting.
It will either be set to Auto or Disabled.
Change the setting to Enabled. Save it by hitting the F10 key at that point and again when you exit the BIOS (save settings and exit).
Upon reboot, all will be well again.
Paul

Audio cuts off then video moments later for Jabber users when content is shared during a multipoint VC

       If a presentation* is being shown from a VC end point/or by Jabber, the audio cuts off, then the video of the Jabber user freezes. The call has not ended on our end we can still hear and see them. A few moments later their video on our end freezes and the audio is lost. The call is finally terminated a few moments after.
       When this happens to the Jabber participant they either have to restart Jabber or in some case have to reboot their PC
       The Jabber participant can be cut off from their class 2 to 3 times throughout the duration of the class
       This happens over all the MCU\blades, so doesn’t appear to be blade specific
       Only appears to happen in multi –point conferences not in point to point calls
*Presentation: This can be anything from a word document, to a PowerPoint presentation to a web browser
The warning they receive says:
The application has encountered a terminal problem.
Location:
Message: assertion failed. (link_ret = = GST_PAD_LINK_OK)
Domain: <no domain>

Is this problem specific to Jabber clients, or Jabber Guest? If the former, you'll have better luck over on the Jabber client forum:
https://supportforums.cisco.com/community/4551/jabber-pilot-support

Flash audio cutting out, video stalling

Hi,
My flash isn't working when streaming video/music - keeps stalling or sometimes the audio cuts out and the video continues. Very annoying!
I'm using Vista 32bit, Firefox and have the latest version of flash.
I've tried watching html-5 videos and they seem to work fine?
Any help?

Try if the latest Flash Player beta works better: http://labs.adobe.com/downloads/flashplayer.html

Audio Cuts out after a few minutes. IChat AV 2.1

I have surfed and have not found any topics like this yet. Audio is cutting out after chatting with another Mac - AV user. Both microphones still appear to work in the preferences, but the person can not hear on the other side. Video works fine, but now audio. Any help or suggestions would be helpful. Virex 7 has already been removed. This solved the video problems. Merry Christmas.

Hi Brian,
Your title states that the audio cuts out during a chat but the post itself seems to imply that you do not have Audio after the chat.
IF it is cutting out during a Video cut can you please tell us what connection speeds both ends have ?
It should be a at least 100kbps up and down.
If it is not you will have problems. You may find that a cable connection varies as the chat goes on and this might be part of the problem.
Soemthings that might help:
GO to System Preferences > Quicktime > Streaming tab and set the Connection sped to mathc the download speed at either end.
GO to iChat > Preferences > Video > bandwidth Limit Drop Down and set this to NONE.
Ralph

Audio cuts out half way through video after conversion.

I just put together some video clips I've shot into a single video, then ran it through conversion. Half way through the completed video, the audio cuts out for the rest of the film. Yet in iMovie, it's still there. I've converted twice and it cuts out in the same spot. Could corruption in a single clip, kill the audio for the following clips? Since it takes hours to convert, I thought I'd ask before deleting the suspect clip and starting again.
I've spliced together clips before without problem, using the same camera source.
Thanks.
Cheers

I figured a work-around. From the clip where the audio cut out till the end, I dragged those clips to a new iMovie project. After converting, the sound was intact for that portion. Then I opened the complete version with audio cut-off in Quicktime Pro. Deleted the the half with audio loss. Then joined the new half I just created. Voila!
Only when I went to post the video on my vlog, did my Internet connection die (Comcast strikes again).

Audio cuts out after 2 minutes

I'm having a bizzare trouble with the Audio cutting out after 2 minutes while watching TV. It comes back for exactly 2 minutes only after I change the chanel, and with every subsequent chanel change after.
I have the Audio out on the @anywhere card connected to the line-in on my Audigy 2 sound card via a stero cable (which I've changed) and I've verrified that my sound card is ok by running other devices into the computer through the line-in.
I've also had alot of trouble with the MSIPVS software crashing and causing my system to hang. I've only had the card and software for a short time and am still working out the bugs but any help will be appreciated.

Did you look at the top of THIS forum? In the Announcements and Important threads? I know there is a sticky thread about sound cutting out, it may, or may not be related to the one problem you have.

Video playback audio cuts off after few second

Pictures are fine but audio cuts off sometime around 5-10 seconds for the entire duration of the video unless you skip the video further a few seconds where the sound cuts off,audio are back but only for maybe 1 or 2 minutes then if you repeat the same step audio are back but again for only a few minutes,only occurs when not using headphones,but when I am using headphones video and the audio plays fine for the entire duration of the video.It annoys me as I don't usually use earphone.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all videos and resync/redownload
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Audio cuts out for a few seconds

Hi,
I'm not sure if anyone is experiencing this but it happens to me all the time and it's so so annoying.
When playingback the timeline on CS6 the audio cuts out at random places and then it comes back, then it goes again for a few seconds then back again,..while video keeps on playing.....this is just random and it can happen as soon as you press play or after a few seconds and it happens when audio is stereo, mono, mp3,wav,aif, you name it.
Also, it happens regardless of playback quality or timeline render status (red, yellow or green). My computer is quite fast + 24gb RAM so I dont think the PC is a problem, It also happens on a different computer within our studio.
Needless to say that editing under these circumstances is becoming impossible/frustrating and I'm even considering finding other software to edit with! I've found others with this same problem at cretive cow http://forums.creativecow.net/thread/3/935424
If anyone from Adobe reads this, please help!!!
thanks in advance

Unfortunately there's no fix for this problem that plagues Classic since release. Considering that a new generation appeared I guess we have no reason to expect a fix anymore.
I also have the problem and it makes the iPod Classic less desirable to be used as a music player than a generic $10 (no name) usb stick.

Why does my facetime audio cut out?

When I am facetiming with mac laptops running snow leapord after a period of time, the audio cuts out.
What causes this and how to prevent it? It is very annoying.
They can hear me but the audio from them is mute.

If the iPod plays fine after you start the car, then most likely its fine and normal. If it doesn't, try contacting your dealer.

Video works on iPod, then becomes audio -- no pattern of why...

Ok, I copy my mp4 videos onto my Ipod (video 60gb) from my Windows XP computer with latest iTunes..
The videos worked fine yesterday on my iPod.. I tried to look at them today, and they were being treated as audio files..
This is not the first time this has happened to me.. The half-assed solution is to copy the videos again from the PC to the iPod and it will fix it for a day or so, but they always go back to being audio files.. And its so random that I cant trust the video to be there when I need it now... (I'm a filmmaker and its really nice to have my film trailer with me at all times)
I've tried to reset all the settings on the Ipod
Ive made sure the "TV Out" is set to "off.
Possible problems
I manually sync the iPod music..
I use the Photo's feature (which seems to be only Automatic syncing) and I've noticed that video files usually screw up and turn to audio when Photos gets updated..
But it happens other times too.. This morning I manually re-copied all my video files to my ipod, and they worked immediately after i disconected from the PC.. Later that day (without reconnecting to anything) I was tryin to show somebody my trailer today, you guessed it -- it was an audio file... It is REALLY frustrating - especially when i bought the dang thing for this specific purpose...
Any suggestions? When it works it really is a cool feature...
Thanks
-=James

James,
I'm not sure if this help you, but it help for me. I was having problems with video files on my Ipod. 95% of the time videos start fine. After 30 seconds (more or less), audio start to fail and video stop. After a couple of seconds, video resume but without audio.
After troubleshooting my Ipod (Video 60gb), even re-installing everything again, I decide to "downgrade" the firmware. Yes, I said "downgrade". After this, all videos run smoothly and with audio. No problem so far.
I use a program "Ipod Wizard" to downgrade the firmware.
What I'm telling is that maybe is not a setting problem, maybe is a firmware problem like I had.
Als, my personal recomendation is to keep all setting to auto-syncronization. Including music, photos and video files. At the beginning I uses to sync manually but a lot of problems came up.
Remember, first of all, BACK UP everything

Ipod classic won't mount after updating to itunes 11.0.2

ipod classic won't mount after updating to itunes 11.0.2.
I updated to itunes 11.0.2 today, after delaying it for a looong time (I have it @ work and don't like the new layout).
Since then, none of my ipods will mount/show up/update. I've tried all USB ports, 3 ipods, 3 cords. Wondering if you know of any issues. I've restarted the mac about 15-20 times today since as soon as I hook up an ipod, itunes immediately spins the beach ball and won't let me click out of it.
I've restarted the ipods 10+ times each.
All of the ipods DO show up on my desktop though. Just not in itunes anywhere with 11.0.2.
One more thing: It's not the cables or the ipods: they both mount fine when connected to my laptop (running old *** 10.4.11 and itunes 9.)
Machine is a Mac Pro running 10.6.8.

Finding this Post took some time but I thought it was me talking when I read it. I was having the exact same issue. I have a G3 I've been upgrading like mad, including a Sonnet G4-500 CPU a Maxtor 60gb & 80gb HDs 1gb of RAM a new LaCie Firewire800 PCI card Graphics card etc. the latest was installing Panther 10.3.9 on the new 80gb HD and also swapping out the old CD-ROM and replacing with the (Apple standard) Pioneer DVD-RW DVR-110D combo drive in it's place. got everything up and booted and poof! no burning. Toast worked read/write no problem. iTunes could read and import no problem, but wouldn't burn a CD.
Downloaded "PatchBurn 3.1.3" installed, re-booted and all is OK in burner land again :>)
I wanted to just post my additional thanks to the lead to Patchburner, and I'm going to donate to the cause. It's worth a $20 donation just for my joy of not throwing this computer out the window!!

Audio cut out and midi miss sync

Lately I have been getting audio cut out, and the missing, 'error while trying to sync audio and midi'.
I thought it was that I had too many instances of virtual instruments. So I mixed the song down. Imported that into a NEW song, with only one audio track, and then proceeded to try to do an organ overdub...Well Logic still drops out and gives me the message, even though there is NO midi information in this file...
Then I noticed that even AIF or mp3 files, didn't play properly from the desktop preview mode. They stop too. Activity monitor doesn't seem to be showing anything overworking..
Disk Warrior fixed some volume errors,
Anyone have any ideas to try?

I'm using a motu828. I disconnected the firewire connection, and ran audio from the headphone jack to the motu, and VOILA, no problems... Last year, I went thru two motu units, not really sure if they are the issue.
I think it might be LOGIC's firewire circuitry. Apple techs couldn't find the issue, I had the G5 motherboard replaced. Another factor was I had 3 Lacie firewire drives (2 firewire 800, 1 400) I have had 4 Lacie drives die on me in the last 3 years. They are the only firewire drives I have, so I don't know if the fault lies with them, or the again Apples firewire circuitry, stressing the drives out???
I also put a firewire 800 card in my system.
I have now switched to an external ESATA raid setup. No more firewire drives. So far so good. Since I had the whole motherboard replaced, I don't know what that means in terms of MOTU connected via firewire..
For now, I'm running audio out of headphone jack, using all virtual instruments, so I know it will sound better when I get firewire audio up and running, but I got tired of it cutting out every 3 - 30 minutes. I'm thinking about the apogee duet unit. But again if it's connected via firewire, I don't know where that leaves me..
My G5 is three and half years old, perhaps it's tired and wants to be retired....
The dark part of me wonders, if Apple computers don't start crapping out after three years of heavy use, or is it that technology, software, updates, push the hardware beyond it's capacity after a few years.

In my ipod classic 60gb fifth generation: it doesn't work anymore music

please anybody can help me!
I've got an IPOD Classic 60gb 5th generation (year 2006)
my radio support still working but i can't hear music anymore!
why?

Reset the iPod
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Have a nice day!

Ipod vid 60gb audio cuts after 32sec. of video

Similar Messages

Maybe you are looking for