Ipod Video 30 keep restarting when navigating through one song too another.

Has anyone experienced that problem before? I just got my IPOD on Xmas and copied all my CDs on it already... But everytime I nagivate through my songs... after maybe 60 or sometimes 100 the IPOD crash and restart... I can't click the next button too often or my IPOD will reboot...

Well, yes, while a song start and I don't want to listen to it, I hit the next button.. at some point... the IPOd just restart...

Similar Messages

  • Centro restarts when navigating through photos

    I purchased my Centro a couple of months ago.  Recently, the Centro has been restarting when navigating through photos I've taken using the Centro's camera.  It will also restart when I try to save a photo that has been sent to me via text message, or when I try to send a photo via text message.  I have cleaned out my previous text messages and deleted the message backup file on my computer.  I've also tried a soft reset and a system reset, but the same thing keeps happening.  As an aside, my husband bought his centro at the same time and he is not experiencing these issues.  Is there anything I can do, short of taking the phone back to Verizon?
    Post relates to: Centro (Verizon)

    Hello and thank you for using the Palm Help Forums!
    Well, there are several things that can cause the device to reset.
    One, corrupted data. If you have corrupted data on the device, when trying to access it, it can and most likely will, cause the device to reset.
    Two, Low memory. If the device has low memory, the device will operate slow and most likely reset because it doesn't have a lot of free space. The free space remaining on the device is it's thinking room you could say. The smaller the thinking margin, the more likely it will not perfrom correctly. Best way to fix memory issues is to get an SD card and save all media files to the SD card.
    Three, incompatible software. If there is incompatible 3rd party programs installed on the device this can cause several problems. Resets, missing data, and other functions not performing correctly.
    The best thing I can recommend you do is a hard reset. A hard reset will erase all data on the device but restore all settings to default. Be sure to backup your data on a PC before performing a hard reset. For further information and instructions on how to do a hard reset go to kb.palm.com and look up article number 42094 in the solution ID search field.
    I hope this helps and let me know if you have any further questions or issues.
    -Pat
    Post relates to: Treo 800w (Sprint)

  • My 30G iPod video keeps restarting while updating!!!!

    My 30G iPod video keeps restarting itself while i am updating my songs. now my ipod has a folder with an exclamation point picture on it. nothing works and it wont let me restore it. i just began connecting my ipod to my new laptop and there has been nothing but problems so far. my ipod worked perfectly fine on my old computer. can anyone help?
    Gateway Laptop Windows XP windows media center edition 2005
    Gateway Laptop   Windows XP   windows media center edition 2005

    thanks, i got my ipod to restore now but i still have the problem of my ipod just restarting itself while im updating my songs. this never happed on my old PC
    Gateway Laptop Windows XP windows media center edition 2005
    Gateway Laptop Windows XP windows media center edition 2005

  • My itunes keeps freezing when I play one song;

    I recently bought the album "Madvillainy" on the itunes store and whenever I play the song "Great Day" it freezes my entire computer at the 1:25 mark. If I'm quick I can shut down itunes fast enough to keep the whole computer from freezing up, but otherwise I can't even open the task manager to shut itunes down.
    I am also now getting a message that reads "The itunes library folder cannot be saved. An unknown error occurred (-50). This is irritating to me.
    Also why isn't there an e-mail address for support?

    It's probably a corrupt file. Delete it and contact the iTunes Music Store customer support department through the form at the bottom of this web page and explain the problem to them. Or log into the iTunes Music Store, go to your Purchase History, find the problem track, click the arrow to the left of the track listing, and use the reporting link there.

  • Ipod touch 2g keeps restarting when in recovery mode

    The other day my ipod started restarting on it's own while I was using it. To try and fix this I restored it to it's original settings. When I plugged it into my laptop (windows 7) itunes recognized the ipod as in recovery mode. When I tried to restore the ipod in itunes, the screen of the ipod went from the usb and itunes logo to a glitchy screen (it was shutting off and restarting, thus losing connection with the laptop) and then back to the usb screen. Ultimately, I got a 1611 error. I've tried all the suggestions for the 1611 error online (using a different computer, change usb port, put in dfl mode, etc.) but no matter what I do, my ipod keeps restarting when it's restoring. Help!

    Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
    If you tried everthing above
    (from:
    http://support.apple.com/kb/TS3694#error1611)
    Then you appear to have a hardware problem.  I would make an appointment at the Genius Bar of an Apple store to confirm.

  • My ipod 4 keeps skipping when i watch videos

    my ipod 4 keeps skipping when i watch videos

    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    -Go to Settings>Message>Send and Receive and sign out and then sign back into Messages. Note that all old messages on the iPod will be deleted.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              

  • Ipod touch keeps restarting in a loop

    I have a 3rd gen ipod touch that keeps restarting when it is connected to my computer. It says that it is dead and not charging even through it has been connected overnight charging. The loop will continue over and over again. Any ideas?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Having a problem when scrolling through one clip: a different clip scrolls through point and time simultaneously. Can you please assist us?

    Having a problem when scrolling through one clip: a different clip scrolls through point and time simultaneously. Can you please assist us?

    First question: this is a Captivate forum, are you sure that you have a Captivate problem (with cpvc or an imported video)?

  • My ipod video keep reseting itself

    my ipod video keep reseting itself when i do a fast forward during a video is played......
    why would this happen?

    Check out my posting here
    http://discussions.apple.com/thread.jspa?threadID=483451&tstart=0
    Regards
    ./sherif

  • How can I, or can I export my songs on my iPod back to my computer?    The songs on my iPod Video 5th Gen now, were at one time on my computer, but have since been erased. Why can't I export the songs from my iPod back on to my computer? I have this

    How can I, or can I export my songs on my iPod back to my computer?
    The songs on my iPod Video 5th Gen now, were at one time on my computer, but have since been erased. Why can't I export the songs from my iPod back on to my computer? I have this same problem with my other devices (iPad 3rd Gen and iPod Nano 6th Gen). I am really frustrated now, because it seems as if I have to start all over again. This will be a royal pain in the butt! I don't understand why Apple makes this so hard and impossible to do this. Please help, anybody!!

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • My computer keeps restarting when I try to open my Dreamweaver trial version

    My computer keeps restarting when i try to open my Dreamweaver trial version.  I have windows xp

    Do you receive any error messages?  Without a more specific error messages I would recommend completing the steps listed in Troubleshoot system errors, freezes | Windows | Adobe software - http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html.  Please feel free to respond to this thread if you have any questions about the steps listed within the document.

  • Is there any method to remember the running subtitle and audio stream when navigating through menus?

    I have a language Menu named 'Setup' with 4 buttons 1.English  2.Spanish  3.Spanglish  4.Subtitle Off.
    To reach this page you have to hit Setup button on Main Menu. The setup button takes to a sub-menu of Setup where I have a symbol of 'tick' at Subtitle Off indicating the state of the current subtitle stream. I have 3 more sub-menus with similar buttons but with 'tick' at different languages indicating the state of the current running/selected language, 2nd page has English with tick, 3rd page has Spanish with tick and 4th has Spanglish with tick. My client wants me to jump on the respective language ticked page when you hit the setup button on Main Menu. As far as I understand we cannot assign a code in Encore to a single button to read what subtitle stream is running.
    Is there any method to remember the running stream when navigating through menus?
    I have done this in Sonic Scenarist.
    Regards,
    A Gandhi

    I think this was added in a "newer" version of Encore (meaning anywhere from CS4 up). In any event, it is available in Encore CS6.
    There is a menu (not button) property that allows yoi9u to make the active subtitle track button the default (i.e. selected/highlight shows) just as you want.

  • E7-00 keeps restarting, when network coverage is l...

    After upgrade to Belle refresh, my Nokia E7-00 keeps restarting when network coverage is very low, or gone.
    I think, that this is an issue related to the phone's network connection, because the problem of the phone restarting is non-existing, when the phone is in offline-mode, and the problem is non-existing, when network connection is good.
    The problem did not exists before upgrading to Belle-refresh.
    Anyone experienced this, or any ideas to solve the problem´?
    Tanks in advance.
    Best regards
    Helgefr
    Solved!
    Go to Solution.

    @Helge1982
    Any difference in behaviour if you set to GSM rather than Dual in Menu > Settings > Connectivity > Network > Network mode?
    Happy to have helped forum with a Support Ratio = 42.5

  • When I merge one project with another, Aperture for some strange reason, randomly scrambles the photos from the project being merged, instead of keeping them in the order they were shot. What can I do to fix this?

    When I merge one project with another, Aperture 3 randomly scrambles the photos of the project being merged, instead of keeping them in the chronological order that I shot them in. What can I do to correct this?

    The photos have just been dumped into a new home and need to be told how to be arranged.  Go to the top left of the browser view for the merged project and select the desired sort order from the drop-down and they'll all sort according to that setting.

  • IPad 1 keeps restarting when browsing or even sometimes when I try to log on to Ipad

    IPad 1 keeps restarting when browsing or even sometimes when I try to log on to Ipad

    IPad is up to date with iOS5

Maybe you are looking for

  • Employee tolerance group&G/L acct tolerance group&Customer/Vendor toler.grp

    Hi All, Can anyone explain me in detail about employee tolerance group, G/L acct tolerance group and Customer/Vendor tolerance group? what is the difference among them and do they have any linkages, like consistency, conflict etc. Any responses will

  • Problem with hierarchy change run in aggregates

    Hi, I have made changes in Cost center hierarchy (infact I have included 2 cost centers in a seperate node). After it I loaded hierarchy into BW through Process chain. Process chain uses Attribute/hierarchy change run process. Consequently Cost cente

  • How to set application configuration so that it shows up in Portal

    Hi, In the Floorplan Manager component (FPM_OIF_COMPONENT), I copied an existing component configuration RPM_INITIATIVE_DETAILS_OIF to ZRPM_INITIATIVE_DETAILS_OIF_V01. And then under application RPM_INITIATIVE_DETAILS I created a new application conf

  • Data Transfer info

    Hi. I am not sure this is the correct place to put this question but it is seemed the most related... When you download something - how can you tell its download speed? I need it to estimated the download time... so when I download a file I will know

  • Steps for configuring Outbound Idoc OILSHI01

    Hi experts,     can anybody tell me the steps how to configure an Outbound IDOC.     It is better if somebody can take Shipment IDOC of IS-Oil - OILSHI01.     if not anything else will also do.     Kindly give me steps in detailed. Since i have never