IPod Video 30gig - firmware issues?

I have been given a 5th gen 30 gig video ipod be a friend to try and fix....
When i turn the ipod on it comes up in recovery mode and i have to restore it.
It goes through the restore process and begins to restart but then comes up with the same 'recovery mode' message.
The odd thing is that the ipod can still be used as an external harddrive with no problems, which is why i am presuming that it may have something wrong with the firmware.
Any help would be much appreciated!

Sorry, that's my fault. I wasn't paying enough attention to the fact you were'nt a Windows user. Try this.
1. Connect the iPod and open the disk utility and highlight it (the iPod).
2. Go to the “Partition” tab, click either “Delete” or “Partition”. If that fails, skip this step and go to 3.
3. Go to the “Erase” tab and choose the volume format as “MAC OS Extended (Journaled), and click "erase". If that doesn't work skip it and go to step 4.
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before you click "Erase." It will probably take an hour or so to complete.
5. Eject the iPod and reset it.
6. Re-connect it and try the restore again.

Similar Messages

  • IPod Video + camera connector issue

    I have iPod Video 60G and recently bought camera connector to have an ability to download pictures from my camera (Sony DSC-V1) on iPod. Also I have Belkin card reader 8 in 1 (F5U248). What I have read from Apple site and other different sources both of this devices should work with camera connector. I have tried both versions of iPod software 1.0 and 1.1. Whatever I have tried gives me on iPod only one message: "ready to connect" and nothing happens after that. It seems like there is no identification if anything connected to iPod at all. I may asume that this is a hardware problem from iPod side. iPod even does not try to initiate download. Did anyone see such kind a behaviour? Appriciate any information.
    Thank you
    Dell Dimension   Windows XP  

    well this is an user to user forum so u wont get an apple support guys response here.
    Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/c.jpg" ="right"

  • IPod Video's Battery issue

    please, can someone tell me how much the battery should last in a 30 Gb model.....please, it's driving me nuts!!!
    Alceus
    desktop   Windows XP  

    well i stopped here and there for about 10 min at a time just when i got frustrated with the map i was driving down to florida which is about 20 hours from here, lasted almost the whole way
    the video i tested the other day and lasted for about 3 1/2 hours playing non stop
    tried to watch both the kill bills. then it cut out, it charges up fast though

  • 60GB iPod video battery issue?

    My 60GB iPod video has an issue where as soon as I remove it from its charger (plugged into an outlet), it says it does not have enough power to keep running and it shuts down. It gives off a very faint smell like something was burning from the inside, but I wouldn't have noticed it if it I hadn't lifted it up and looked at it very closely. I've been charging it for about four days now, and occasionally I would pull it out to see if it was still having the same issue. Sure enough it was, and strangely, when I plugged it back in, all of the settings would be reset (namely the time would refer back to 12:00AM). All of my files are still there, but when I plugged it into the computer, it would give the little loading circle and say "Please wait. Very low batter." The computer reads the device but not even as a hard drive (which I set it too).
    Maybe the battery needs to be replaced? How do I know I can salvage my iPod?
    *Note: I haven't had the iPod for a while. It was a gift from a friend and it seems like it was pretty used to begin with. I'd give it about two to three years since it was bought. The warranty is WAY over by the way

    Yeah, an iPod is basically a small computer, with a locked down OS. If you want, my company www.dr-pod.com can replace this for you quite cheaply.
    Thanks
    Mark
    I may receive compensation from this post.

  • 60GB iPod Video menu disappeared after update

    I just received my 60GB iPod yesterday. I downloaded the new software update from Apple and updated it. After I did that the Video option on my menu disappeared. I still have the video in itunes but it is not on my ipod anymore.
    HELP! New user and this was a main purchase reason. Thanks for any assistance.

    I have new ipod video and had issues so I used the updater that was included, dated 6/05, I now have a ipod video with software version 1.2 and it thinks it is an older ipod photo only. Now that it is installed in the ipod the updater assumes it is an older ipod and restore doesn't work (except to restore it to version 1.2) I am so frustrated I could scream. Apparently the new updater 10-05 is ok, as it would have restored to the correct software but now, it's too late! any ideas? What I need is a restore function that puts back in the version 1.0 software for the ipod video, but there is no such thing.

  • IPod touch 2nd gen restored 3 times in a week - hardware or firmware issue?

    I have a 2nd gen 32 gig ipod touch that I purchased just before christmas. Everything has been just great until this past week. It has crashed hard..3 times now. I get the apple logo and it won't boot any further.
    Each time has been random, crashed once while watching a movie, once in safari and once while playing a game.
    I've just restored it, again. Anyone have any ideas? Firmware issue? Or hardware issue? Is there any way for me to roll back to a previous firmware?
    Is anyone else having the same problem?
    Any thoughts would be appreciated. I'd hate to have to send it back to Apple.
    Thanks in advance!

    OK now I get it.
    You're going to have to do a full restore to factory settings and begin adding the music, video and apps back one category at a time.
    Don't get in a rush, you need to know where/when the problem starts.
    If every thing's fine for the week with music and video but crashes the day after you install "that app." then you'll know.
    Also some apps have caused trouble in the past but you'll have to list them for anyone else to tell.
    Just a note of warning : you may have a music or video file as the problem but you may also have a "quantity" problem.
    The first will be fixable with a new file, from Apple(iTunes) if it's not something you created, so you'll need to have at least a rough idea of what was on your computer when the crashes started.
    Make notes if you have to!
    If the crashes continue then it's the Apple store, it could still be hardware or some program corruption, but at least you'll have eliminated a few contenders.

  • Sync issues with Ipod video

    Hi - I just got my daughter an ipod video, and rented her a movie and I can't get her ipod to sync - it says the required "disc" is missing. I've run it through all the diagnostics and they check out okay. I'm a total novice, so any help would be appreciated.
    Thanks,
    Janet

    Same problem here - music syncs - tv shows do not.
    Just for the record, I have not purchased an Apple product yet that has not had extreme issues (iphone was the last one and an Apple I purchases for video editing).

  • Downgrade firmware on iPod Video 5.5g?

    Is there a terminal command that I can use to downgrade my firmware to a previous version? I tried using the old iPod Updaters in my Utilities folder, but they won't let me install older firmware versions.

    Found this on iPodlinux:
    Enter the following command in the Terminal, then press return:
    mount | fgrep Volumes
    The result should be a line that begins with "/dev/disk...". For example:
    /dev/disk1s3 on /Volumes/ipod_nano (local, nodev, nosuid, journaled)
    In the preceding example, the disk number is '1'.
    Make a note of the numeric digit appearing after the word "disk"; disregard the letter "s" and following digit(s). Enter the following command in the terminal, then press return:
    cd "/Applications/Utilities/iPod Software Updater.localized/iPod Updater 2006-03-23.app/Contents/Resources/Updates"
    Now backup your current firmware. Enter the following command, but substitue the '?' with the number you made a note of in the first step,followed by "return":
    dd if=/dev/disk?s2 of=myipodfirmware
    Now, perform the downgrade by entering the following command, but substitue the '?' with the number you made a note of in the first step, followed by "return":
    dd if=Firmware-14.5.1.1 of=/dev/disk?s2
    This would downgrade the nano firmware from 2006-03-23.
    Firmware-13.6.1.1 downgrades the iPod Video.

  • 30gig ipod video keeps resetting itself

    my 30gig ipod video keeps resetting until it runs out of battery life, if i have it connected to my pc, it just keeps resetting indefinately, and if i disconnect it, it does so until it runs out of battery.
    i've already reset it manually, returned it to factory conditions, I dont know what else to do, any help at all would be appreciated.

    Hello eonitwat,
    And welcome to Apple Discussions!
    Try manually forcing the iPod into Disk Mode and then reconnecting to your computer. This might prevent the iPod from continuously rebooting to allow you enough time to try and reformat the iPod completely using the tools provided by Windows.
    Here are instructions on how to reformat your iPod on WIndows. The instructions are for Vista and XP, but you'll find that Windows 7 is very similar to Windows Vista.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    If still no luck, you may want to consider having the iPod serviced.
    Worth a shot.
    B-rock

  • When will Apple release the new iPod Video Firmware?!?

    Hello there
    I'm just wondering when will Apple will release iPod Video Firmware that does fix the Artowork disappearance in iPod Video
    You can check the whole problem details in: Re: Ipod album cover problem "An unknown error occurred (-50)
    At: http://discussions.apple.com/message.jspa?messageID=2321576#2321576

    "Anyhow Chris if you wanted to be respected, reply carefully without sarcastic, provocative dumb answers.
    At last we all here to learn and help each other's with all we've got, so leave the selfishness and be a member or whatever big shot you are and be someone we all count on."
    And what you needed to do before you asked a question speculating about forthcoming updates from Apple, was to read the Terms of Use about posting here in Discussions, specifically this part.
    "don't add submissions about nontechnical topics, including that Apple rumor you saw on another website, discussions of Apple policies or procedures, or speculations/rumors about unannounced products."
    The Terms of Use are Apple's "house rules" for posting here, which you specifically agreed to. If you can't abide by them, expect to get your posting privileges suspended by the forum Moderators.
    Just a friendly heads up. : )

  • NEW IPOD VIDEO/ ITUNES ISSUES. HELP!!

    OK here is my problem. I recently recieved my IPOD Video. Attempted to sync with PC... everything ok. Then tried to sync w/ ITunes... Big problem apparently I need to format all my songs to a new AAC?? Not even sure what that means. Any suggestions? I called Apple and they said I would have to do this everytime I copied a cd to my ipod. Is that correct? If so, the IPod Video will be sent back. There has to be an easier way. Please help!

    I need to format all my songs to a new AAC
    That's not necessarily true. The don't NEED to be in AAC. They just need to be in a format that the iPod can play.
    There are several formats you can use.
    They are:
    AAC (16 to 320 Kbps), Protected AAC (from iTunes Music Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3 and 4), Apple Lossless, WAV, AIFF
    What format are your tracks in now?

  • Earlier Issue with 30Gb Ipod Video

    Hey, I have a 5th generation 30Gb Ipod video. I recently went out and bought a new 2.0 USB port for a PCI slot for my Ipod since I only had a 1.1 before that.
    Well my problem is, I had it plugged in last night and it had the do not disconnect screen on the ipod for about an hour, so I pulled it out without ejecting it, and later on it said that windows said that the device was not able to be identified and was malfunction try unplugging it and plugging it back in, I did that and it still would work, so I restarted my PC and got it to work, then about a hour later I was uploading some photos and it gave me the same message, so I just turned off my PC and went to bed as it was getting late.
    This morning when I woke up I thought maybe it was just the port so I unplugged and plugged it back into a different 2.0 port since I got 4 with that card I bought, I then left for school and came back to find that my Ipod is working like nothing happened since I changed it's port.
    I just want to know if I should pull out that warrenty card and get a new one or if that message was just because the one port could recognize something was there, but not able to tell what device it is.
      Windows XP  
    5th Generation 30GB   Windows XP  
    5th Generation 30GB   Windows XP  

    Hey, I have a 5th generation 30Gb Ipod video. I recently went out and bought a new 2.0 USB port for a PCI slot for my Ipod since I only had a 1.1 before that.
    Well my problem is, I had it plugged in last night and it had the do not disconnect screen on the ipod for about an hour, so I pulled it out without ejecting it, and later on it said that windows said that the device was not able to be identified and was malfunction try unplugging it and plugging it back in, I did that and it still would work, so I restarted my PC and got it to work, then about a hour later I was uploading some photos and it gave me the same message, so I just turned off my PC and went to bed as it was getting late.
    This morning when I woke up I thought maybe it was just the port so I unplugged and plugged it back into a different 2.0 port since I got 4 with that card I bought, I then left for school and came back to find that my Ipod is working like nothing happened since I changed it's port.
    I just want to know if I should pull out that warrenty card and get a new one or if that message was just because the one port could recognize something was there, but not able to tell what device it is.
      Windows XP  
    5th Generation 30GB   Windows XP  
    5th Generation 30GB   Windows XP  

  • 30GB iPod Video battery Issue?

    I have noticed a problem with my 30GB iPod Video recently. I've had it for about 1 and a half years now with no problems until now.
    I think the battery may be on its last legs as it seems to discharge a lot sooner than it used to (i.e. fully charged Monday, by Wednesday its displaying "very low bat warning" upon sync - and that's with hardly any use!). Even on the Apple Support site (here:http://docs.info.apple.com/article.html?artnum=60970) there's a page stating that it should take up to 2 weeks to discharge! This has happened the last 3 times i've synced and charged it!
    Is this a sign that the battery is on its way to battery heaven (or ****)?

    The symptoms do match a bad battery. Also, from what I've seen on the forum, a year-and-a-half is about normal (obviously depending on usage).

  • 60GB iPod Video Having Issues

    Im not sure if this is the right board for iPod Video but if it is not, please excuse my mistake.
    But anyway I tried using my iPod Video this morning and when i turned it on it showed a big black checkmark and the phrase "OK to Disconnect" under it. Which is weird because I haven't connected it to the computer in a few weeks. Also where the checkmark is there is this little black line going through it, kinda looks like the static you would see on a TV but just a tiny line of it.
    Sorry if this is confusing, if you need me to elaborate more I will try to describe it better. But does anyone know how I can get this off my iPod Video so I can access my music again?
    Thanks in advance for any responses.

    So it now works, except for this line across the screen?
    You may want to try using the Restore button in iTunes to erase the iPod and initialize its software. Then you can set it up and re-sync it as desired. If the line is still there after that, it is probably a hardware fault.

  • 60Gig Ipod Video Issues

    i have a 60G ipod video and I had just connected it to my PC and transferred all my music and videos, and then the computer made the sound when something is disconnected from the USB drive. And i looked at the ipod and it comes up with the Apple boot screen, then makes a few clicking sounds then shuts off, then does the same thing again. It's been constantly doing this for the last 20 minutes....
    I can reset it using the centre and menu buttons, and the screen goes blank, but then it just starts doing the same thing a few seconds later...
    i only just got this ipod this morning and already it is stuffing up.... any help?

    See these...
    iPod Only Shows An Apple Logo and Will Not Start Up
    iPod Only Shows An Apple Logo
    btabz

Maybe you are looking for

  • Filter Criteria in Value Help for InfoObject

    Hi, Is it possible to remove the value from Filter Criteria. When I use F4 for a Field (in Screen) , its showing a poup window (Value Help for Info Object) with some personal values. When I click "More Values" option its showing the General Value Lis

  • Differences between trigger and Integrity Constraints

    waht are the differences between trigger and Integrity Constraints

  • MM:Post custom Invoice

    Hi If I posted Customs Invoice before GR in say 30.04.2010 & cancelled the same on 01.05.2010, Why MIRO Cenvat Clg (Cr) entry is splitted with Cenvat Clg & Purch variance acct (Db) while cancelling Invoice. Is this a correct or not ??? Vinay

  • GPF in ORACOMMON8.DLL when SELECTing a BLOB w/OCI

    Hello, This may not be the right Forum for this topic but I didn't know where else to post this... I am using OCI with Oracle 8.1.5 drivers and I am trying to perform a SELECT on a BLOB and a CHAR. When I try to SELECT the BLOB, ORACOMMON8.DLL throws

  • Solaris 9 Futures

    Please anyone tell me futures of Solaris 9.