IPod video camera recording

When recording video on iPod touch it seems to stop at about 50 minutes despite having more memory available. Is there any way to increase recording time for a single event?

Try:
Tascam iXZ Mic/Instrument Interface for iPad/iPhone/iPod touch in ...
I foun dit by Googling for: mic input for ipod touch

Similar Messages

  • Looking for forums for Sony digital video camera recorder DCR-TRV 11

    I've been thinking hard and decided that I WILL use my Sony digital video camera recorder DCR-TRV 11. (I was being tempted by a smaller Sony that has a 40x optical zoom.
    Question: Do you know of where I can find a good forum for this brand and model? I Googled it but would like personal recommendations.
    Thank you.
    -L

    Bengt Wärleby wrote:
    Hi
    Don't know of any other forum else this (and FinalCut)
    Your Camera NEED an FireWire-Cable FW-800 <--> 4-pin or FW-400 <--> 4-pin
    I have a FireWire cable.
    The supplied USB-Cable will not work with iMovie or FinalCut - Sorry.
    Yours Camera also can record Audio as 12-bit or 16-bit Audio.
    Please - SET IT TO 16-bit (now) - else severe audio sync problems in iMovie
    (FinalCut - might be able to Capture 32kHz audio)
    How do I set my Sony digital video camera recorder DCR-TRV 11 to 16-bit?
    Also, I do not have or use Final Cut.
    Thank you for the warning about 16 bit. I wish you would tell me why it is important to set to 16 bit, though.
    Thank you,
    -L
    Yours Bengt W
    Don't know of any other forum else this (and FinalCut)
    Your Camera NEED an FireWire-Cable FW-800 <--> 4-pin or FW-400 <--> 4-pin
    The supplied USB-Cable will not work with iMovie or FinalCut - Sorry.
    Yours Camera also can record Audio as 12-bit or 16-bit Audio.
    Please - SET IT TO 16-bit (now) - else severe audio sync problems in iMovie
    (FinalCut - might be able to Capture 32kHz audio)

  • IPod Video + camera connector issue

    I have iPod Video 60G and recently bought camera connector to have an ability to download pictures from my camera (Sony DSC-V1) on iPod. Also I have Belkin card reader 8 in 1 (F5U248). What I have read from Apple site and other different sources both of this devices should work with camera connector. I have tried both versions of iPod software 1.0 and 1.1. Whatever I have tried gives me on iPod only one message: "ready to connect" and nothing happens after that. It seems like there is no identification if anything connected to iPod at all. I may asume that this is a hardware problem from iPod side. iPod even does not try to initiate download. Did anyone see such kind a behaviour? Appriciate any information.
    Thank you
    Dell Dimension   Windows XP  

    well this is an user to user forum so u wont get an apple support guys response here.
    Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/c.jpg" ="right"

  • Video Camera Recording / Broadcast Setup for iMAC

    I'm interested in recording an event with my 3CCD video camera onto my Intel based iMAC, using Final Cut Pro. I also want to play it back real-time to a television set. Any ideas what hardware i will need to do this? I have multiple iMACs that I can use, but I don't know how to get the audio and video from Final Cut on the iMAC to the television. Anyone have ideas?

    If your camera is capable of outputting analog video+audio simultaneously with FW digital video+audio then you could connect your camera to your iMac via FW and your camera to your TV via analog. That is, if your camera is capable of doing it.
    Regarding your iMac, the only way to use your iMac to capture with FCP and output to a TV simultaneously would be with the Apple video adapter. Depending on which model iMac you have, you could either mirror the iMac desktop to the TV or extend the iMac desktop to the TV. But in either case the video quality on the TV is going to be crap; and you're still going to have to figure out how to feed the audio to the TV.
    A better solution, although more costly, would be to use a video mixer between the camera and your iMac. Camera -> video mixer -> iMac, second mixer output (aka monitor output) -> TV. That presumes however that the video mixer is DV capable or, if not, that you feed analog to the mixer and add an analog-digital converter between the mixer and your iMac (camera -> mixer -> DV converter -> iMac).
    By the way, you didn't say whether you are working in DV or HDV or AVCHD. I assumed DV. There are HDV mixers but they run into 5 figures.

  • Video Camera Recording Failed

    I was trying to take a video with my phone today and every time I pressed the record button a notice would come up saying recording failed.  I tried closing the camera and then bringing it back up but it still says recording failed.  Anyone have this problem and know how to fix it?

    droidcharge1996 wrote:
    I was trying to take a video with my phone today and every time I pressed the record button a notice would come up saying recording failed.  I tried closing the camera and then bringing it back up but it still says recording failed.  Anyone have this problem and know how to fix it?
    Hi droidcharge1996,
    First troubleshooting step will be to reset your phone's camcorder to default settings. From the home screen touch Applications>Camera>Mode(switch to camcorder)>Options>Settings>Reset. Once your settings are reset try using your camcorder.
    Additionally, a corrupted SD memory card may be causing the error. Format your SD card. Keep in mind that formatting erases all content from the memory card and prepares it for use with your phone.
    1. From the Home screen, press the Menu Key>Settings>SD card & phone storage.
    2. Touch Unmount SD card.
    3. After unmounting the SD card, touchFormat SD card, then follow the prompts to confirm the formatting of the card.
    I trust that the above steps will resolve your phone's camcorder concerns.

  • IPod video camera iPod question? Earphones

    Recently , I broke my right earphones and the left one lasted me for about two months .
    Today , I was listening to my iPod and the song stopped and played again .
    When I twisted the earphones , the song would stop and stuff .
    I searched Apple's stores and only found the earphone speakers with remote or something and I don't want those . I want the original ones you get when you buy a new iPod . Any chance of finding them where I live ? [Calgary]
    Or is there another brand of earphones that works as well as the Apple original earphones ?
    Thanks ...

    -JapaneseAzn- wrote:
    Recently , I broke my right earphones and the left one lasted me for about two months .
    Today , I was listening to my iPod and the song stopped and played again .
    When I twisted the earphones , the song would stop and stuff .
    *I searched Apple's stores and only found the earphone speakers with remote or something and I don't want those . I want the original ones you get when you buy a new iPod .* Any chance of finding them where I live ? [Calgary]
    Or is there another brand of earphones that works as well as the Apple original earphones ?
    Thanks ...
    Did you ask the store clerk if they had any for the 5th gen iPod Nanos? They could have some in the stock room & not on display yet.
    The online Apple Store has a few. Have you checked? iPod Earphones

  • Ipod video...why wont it work with it?

    I find it strange that the nike+ software only works with nanos, ipod video came out after the first nano...when that nano work with the soft ware why doenst the video?! and are we sure, has someone tried the nike + software with the iPod video?!

    This was likely done because the hard drive on an iPod video is much more vulnerable to being dropped and other hard impacts compared to an iPod nano's flash media.
    (27363)

  • Can't find IPad 2 video camera function anymore.  Help please.

    It seems that one of the updates along the way resulted in video camera record disappearing.  Still camera function works.  Do it need to reset everything or what?  FaceTime works well.

    Yes, as I said, do NOT tap, you must swipe between the different modes for camera, either swipe on the words themselves or in the center of the screen.

  • Original prices of ipod videos?

    i know that when the iPod video came out in 2005 it was priced at $299.99 and the 60 was priced at $399.99. and i would say around fall of 2006 when the 80 gig and the new nanos came out i got a newsletter from apple about it all. and if i recall wasn't the iPod 30 gig priced at $229.99 and the 80 gig at $299.99? and then i also late October didn't the the prices rise to $249.99 and the 80 gig at $349.99. i am wondering this cause me and my friend got into an argument and he says they they were never priced at 229.99 and i read that newsletter and everything i even saw the iPods priced that way of 229.99 at my local target and my mom even bought my ipod 5th gen 30 gig at target with an original price of 229.99 and she came back a week later in october to exchange it for a black ipod and the clerk told her she got lucky and everything cause the ipods just raised in price to 249.99. so can anybody give some feedback about this???

    Yeah, the 60 gb was $500 here and the 80 gb is $400. Quite the difference, but it could be that its getting cheaper to produce.

  • Cannot found url error when i try to play my camera recorded video from my iphone 4S running ios 5.01

    I got an error cannot Find url when i attempt to play my camera recorded video from my iphone 4S 32 gig. I try to restart my phone but still no luck. There was no problem previously, but suddenly i got this problem with no reason. I also unable to copy the video to my computer using itunes. So please helppp...
    Thanks a ton!!
    Note: My iphone 4S is running ios 5.01.

    See if it helps to delete the firmware file and download a new one:
    Rename, move, or delete the iOS software file (.ipsw)
    iTunes uses "ipsw" files to restore your iPod or iPhone. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
    Mac OS X
    iPhone
    ~/Library/iTunes/iPhone Software Updates
    iPad
    ~/Library/iTunes/iPad Software Updates
    iPod touch
    ~/Library/iTunes/iPod Software Updates
    Note: The tilde "~" represents your Home directory.

  • IPod Nano Video Camera

    My fiance just got the newest iPod Nano for his birthday. It has a video camera to record videos. He can't use the video camera because it's not on the main menu. How does he go about putting on the main menu so he can use it?

    Hello musicrl87,
    And welcome to Apple Discussions!
    Head to *Settings - > Main Menu*. Then locate the video camera menu item and click the Select (Center) button to place a check mark on it. This should make the camera available from the main menu.
    B-rock

  • Macbook pro fails to read sd card with movies recorded on it, any ideas? I can view them in the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it.

    My macbook pro is failing to read a new sd card with movies recorded on it. Any ideas please? A previously used SD card has downloaded without problems. I have tried using a card reader as well as downloading from the video camera itself, neither works.
    I can view the latest recordings on the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it but didn't think of that at the time. Obviously don't want to do this now as it will wipe the movies.

    Hi and Welcome to the Forums!
    From everything you've described, you've done everything possible. Hence, I recommend you seek out your warranty support.
    Good luck and let us know.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

    I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • Everytime I try to use the video camera, my ipod automatically restarts???

    Everytime I try to use the video camera, my ipod automatically restarts. I just need to bring the clicker to the Video section on the main menu for it to turn on and off again. I have to scroll over it really fast so it doesn't restart. My dad bought it a few months ago and I just opened it about a week ago. So far, I've synced it once, taken it out out without first ejecting it, and using it on a lamp iHome. Should restoring the ipod do the trick? Is this a common issue with the rest of you?

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Recording the screen with a video camera

    Can someone help me be able to record everything on my screen to my video camera? Can I use a firewire to do so? Is there a specific application i require? What I DON'T want to do is record my screen straight to the computer (this will be processor/space intensive) plus I already know how to do that? Thanks in advance.

    Welcome to the Forums!
    I'm a little confused. You want to record your screen to your video camera? Point the camera at the screen and press record on the camcorder. Viola.
    I suspect what you want to do is not that simple, but that's the answer to the question you asked
    IF you have a recording device with a _video in_ (which is something that camcorders typically don't have!! - other than the lens, I mean...), you'd need to convert the video out - which is the DVI port.
    So, if it were me, I'd use my DVI-to-video adapter, connect the DVI output to my DVR (the one on my TV), set the DVR to that input, and record that way.
    Hope this helps...

Maybe you are looking for

  • How can I test websites I'm making in for Internet Explorer

    Hi, Is there good way to test websites I'm making in Internet Explorer? I know about sites like http://ipinfo.info/netrenderer/ , but as far as I know, that only works when it's online and you give it the link. What about while you're still developin

  • Improper Image format after PDF download in OBI 10.1.3.3.2

    Hi Guys, I want to display an Image on OBI Dashboard page with a Customer logo along with rest of the Reports embedded in it. 1) I am embedding the image(.bmp image file) using the Image/Link option available in Edit Dashboard 2) I have kept the imag

  • WSAD 5.1 DB2 Datasource creation help

    I'm new to WSAD 5.1. I'm using DB2 database. I would like to know how to create datasource and use it in my jsp application. Please help me out. Is there any resource is available through which I can go through. Thanks in advance. Regards, Sudheer

  • PDF shows as a blank form

    Created a PDF in reader and now shows as blank after I send in an e-mail; I see other people have the same issue. Can this be rectified through the reader platform or do I need to purchase other adobe products to solve this issue?

  • A question about ascii converssion

    hi everyone i wanna write a program to convert any file that has been input into its ascii representation so my issues are :- what are the file types tht can be given as input to this prgm? how is it possible to verify the output and wht are the clas