IPod Video - Do not disconnect

Last night I added some photos to my iPod and ran the new update, and left it connected to my computer overnight to recharge. This morning I get a red circle with a red slash accross it with a message "do not didconnect", I am new with iPods and have not a clue as to what is happening. iPod with video display, 30 gb. THanks in advance for your help.
Louse Parrish

The answer could be as simple as you have your iPod enabled for disk use. If this option is switched on then the Do Not Disconnect will stay there until you manually eject your iPod.
Connect your iPod and in when it appears in the iTunes 7 source list click on it to see the preferences pane. In the "Summary" tab see if there is a tick in the box “enable disk use". Then under the Music tab see if your iPod set to automatically sync all songs and playlists. In Summary remove the tick from "enable disk use" and your iPod should automatically disconnect after it’s finished updating.
If you have your iPod set to manual update, the "enable disk use " box will be greyed out and ticked by default, in that case check this link: Safely Disconnect iPod

Similar Messages

  • My ipod video is not recognized by the computer what should i do/

    my ipod video is not recognized by the computer what should i do?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Ipod frozen ("Do not disconnect") Restore attempt triggers error message

    The sequence of events:
    1. ITunes did not recognize my Ipod this morning (My ipod icon did not appear in itunes)
    2. Itunes froze. (Computer froze generally)
    During attempts to restart computer, realized that computer failed to start if Ipod firewall cord is plugged in--so I unplugged the ipod. "Do not disconnect" in ipod window.
    3. Read "Ipod The Missing Manual" fix for this disconnect problem, but does not work. Part of the problem is that my ipod still hasn't appeared in itunes, alhtough the computuer makes a familiar "dong" sound when the cable is plugged in.
    4. Figure I will attempt "system restore" for ipod during the brief period Itunes is unfrozen (thawed) immediately after I've restarted the computer. Ipod finally appears in Itunes (which takes 10 minutes to open) It does recognize an ipod--but it doesn't have my name on it. And there's a New message, that my ipod is corrupted and I must restore it, lose songs, etc. So what. Onward.
    5. Attempt to restore also unsuccessful. A new, sick-making message: "There was a problem downloading the ipod software for the ipod. The requested resource was not found."
    I've tried a new cable, tried a new port...
    Ipod is one year old. What does any of this mean? Where do I go to begin finding a solution? Do I throw it out and start again? Obviously my computer is botched up, too. What a mess.

    I have the same... and so many others and no one has a solution (up to now). It might has something to do with itunes 7th version. I have tried EVERYTHING (believe me: the 5 R's/ other Itunes versions / winamp / reboot/ reinstall/ restore/ update/ other port/ etc etc/ searched this forum)
    So many people having this problem, though Apple has not reacted on this yet...
    despite asking 180 euro's service costs if you want to resolve this by sending this item. Great

  • Urgent, Ipod video will not turn off at all. everything tried.

    My new 5.5 gen ipod video is not turning off at all, i tried restarting it and it didn't work, i put sleep in my menu and that didn't work! HELP DOES APPLE STORE REPLACE IT?
    CAUSE I DONT HAVE THE ORIGINAL BOX AND RECIEPT ANYMORE!!!!

    gee dude, i dont know. id love to help u but my ipod has never done that. so i dont know
    did u try pressing MENU+'CENTER BUTTON' at the same time for about 5 seconds to reset it?
    gotta go, my mom's gettin' ******----ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ

  • Why my ipodmy ipod displays do not disconnect and wont sync but can be restored?

    why my ipodmy ipod displays do not disconnect and wont sync but can be restored?

    If it is a problem than I have it too. Mine does the
    same as long as I don't stop the device via the
    little green arrow icon (USB manager) down by the
    clock.
    I never really need to use the Ipod when it is hooked
    into the PC because everything is done through
    iTunes. I just thought it said "do not disconnect"
    because it was associated with both iTunes and the PC
    as a hard disk.
    If I stop the device or "eject" the iPod, it goes
    from do not disconnect to the normal menu tree.
    So when you take the USB cable out of the iPod, it goes back to normal?
    If that's what you mean, mine does that too.
    It's just that I read that if you remove the USB cable from your iPod while it says 'do not disconnect', it can wipe all your music....

  • Why  ipod displays do not disconnect and wont sync but can be restored?

    why  ipod displays do not disconnect and wont sync but can be restored?

    Have you tried resetting your iPod while connected? Then, unplug it, and connect it again.
    Have you tried putting your iPod into disk mode, then connecting it to your computer again?
    Check out this Five R's -> The Five R's
    Also, see all the suggestions in this article, to start with getting your iPod recognized by your computer -> iPod is recognized by Windows but not in iTunes
    -Kylene
    If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

  • Ipod screen : "Do not disconnect" [french]

    French
    Bonjour
    Je sais qu'il s'agit d'un forum fréquenté par les anglais mais voici mon probleme:
    Mon ipod 30 go video est en mode ne pas déconnecté (de l'ordinateur) alors qu'il n'est plus connecté.
    Si je le rebranche il n'est pas detecté ni comme disque dur ni dans itunes
    Je n'ai pas la main pour pouvoir l'éteindre donc si qqun a deja eu ce probleme merci ([email protected])
    In english (i try)
    My ipod viedo 30 Go have a problem. i can read : do not disconnect but the ipod is not connected.
    If i connected, the computer doesn't detect him.
    I could not stop it.
    (Sorry for my poor English)
    If somebody can help me.... [email protected]
    5g ipod video 30 Go    

    Here... see if any of these articles help (sorry but as you can see I don't speak French, I wish I could tho)
    http://www.apple.com/support/ipod/five_rs/
    http://docs.info.apple.com/article.html?artnum=61705
    http://docs.info.apple.com/article.html?artnum=60983
    Regards--- jgurbisz
    If I helped... please mark as helpful or solved. Thanks

  • IPod Video 5G Not recognized on MacBook Pro 17 Intel

    My Ipod video 5G is not showing in iTunes or on my desktop. Not showing in System Profiler either. The ipod does charge however. I'm frustrated and stumped. I've tried the 5Rs a number of times but can't even get to the "Restore" portion. iPod works fine when not connected to my MacBook Pro. I also have a Nano and a 3G ipod (firewire) that both work fine and are recognized and update without a problem.
    Anyone have an answer to getting the iPod video recognized....? Apple?
    MacBook Pro 17" Intel   Mac OS X (10.4.8)   I'm running OS X 10.4.8 and iTunes 7.0.2

    Have you tried the steps in this article?
    iPod missing in iTunes and Mac desktop
    -Kylene

  • IPOD VIDEO 30GB not recognized by iTunes or My PC

    So I have this ipod that I'm trying to revive. I'm not even sure which generation it is, but it's a 30GB ipod classic and I bought like in 2005. Here's the thing, this ipod has been in my drawer for years and when I turn it on it says "Use itunes to restore", but itunes wont recognize it, and it won't appear as a disk in my pc. I plug it into the computer and it says do not disconnect but nothing happens, BUT, when I use the "menu and center button at the same time" trick while it is plugged in until the apple logo appears, it shows up in my pc as REMOVABLE DISK F: (an empty one though)
    I right click it to format it but by this time the "use itunes to restore" message has appeared again and the ipod either disappears from my pc or it says "the device has been disconnected".
    Also, when I open the computer's device manager it appears as APPLE IPOD USB device, which gives me some hope, but it doesn't show any of its properties. (It says - for each characteristic. I mean, Disk -, Type -, Status -, etc)
    Finally, when I leave it plugged in for a while just waiting, my computer freezes completely until I plug it out.
    Any tips?? Thanks!!
    And greetings from Venezuela

    did you try all those steps:
    Disconnect the device from the computer.
    Save a screenshot by pressing the Home button and the Wake/Sleep button at the same time (the screen should flash briefly). Note: Taking screenshots and saving images on iPod touch requires iOS version 2.0 or later.
    Reconnect the device to the computer.
    Open the Device Manager in Windows as follows:
    Windows XP: Click Start > Run. In the resulting dialog type devmgmt.msc and press Return on the keyboard.
    Windows Vista or Windows 7: Click Start. In the dialog, type devmgmt.msc and press Return on the keyboard. If Windows needs your permission to continue, click "Continue".
    Expand all the sections labeled below (not all sections may be listed):
    Imaging Devices
    Other Devices
    Portable Devices
    Universal Serial Bus Controllers
    Look for the entry that recognizes the device as a camera. This entry should be called Apple iPhone,Apple iPad, or Apple iPod.

  • Ipod says "do not disconnect" but is not recognized by itunes

    Okay so, I've connected my ipod to my computer and it's not being recognized. On my nano's screen it says "Do not disconnect" and has the red circle no sign flashing on it. I've updated my version of itunes, restarted my ipod, and have restarted my computer multiple times.
    It can't be the USB because quite obviously it's working... it has to either be with my macbook or my ipod.
    What's going on here?

    I am having the same problem and I tried everything to fix it. On top of that problem, my iPod won't turn off, and will only play half of a song and then skip to the next song which is very maddening! Can anyone help?
    Unknown   Windows XP  

  • My iPod Video is not being read as an iPod Video

    I have an iPod video 5th generation, and since I restored it, the video and photo tabs do not show up. It's being read as an earlier type of iPod than it is.
    I am getting very angry about this, especially since I bought it new.

    Never mind. It's fixed itself somehow.

  • Ipod flashes "do not disconnect", not recognized in itunes source - Help!

    My ipod (2nd generation) continues flashes do not disconnect when connected. Recently upgraded to itunes 8. Have tried 5Rs including restarting service, renaming drive, reinstalling itunes, etc.
    Also ran diagnostic, all test pass except sync test. Please help, any thoughts?

    hi, thanks for responding so quickly. here's what happened:
    1. i connected the ipod to my laptop and the DND (do no disconnect) message flashed on the ipod screen.
    2. as u suggested, i clicked on itunes and tried to change its setting to automatic..it was on automatic already.
    *laptop showed update was completed but DND message still flashes on ipod. I decided to check if everything else was working.
    3. downloaded a song and when it was done i checked my itune page and library...song wasn't there.
    4. i clicked file, add file to the library, browsed and found the song in documents/music/itunes.
    5. clicked open then updated the ipod.
    *update completed, DND shows on ipod, clicked eject, took out the cable.
    6. menu showed on screen, all other songs were there expect for the last one i tried to transfer.
    i don't know what to do now...?? could it be broke?
    ipod   Windows XP  

  • 40gb Ipod says "do not disconnect" all the time... please help!

    My 40gb ipod just says do not disconnect all the time when it is connected to my pc. itunes says the update is complete and my computer is recognising the ipod.
    please help!!!

    I'm having the EXACT same problem... it all started after I did the iPod software updater...
    HELP!!
    BTW - my iPod is the 20GB
    iPod is running fine (otherwise), but will not update, even though iTunes says update is complete. iPod screen continuously flashes Big Red Do Not Disconnect screen.
    Oy.

  • 30 GIG Video iPod, Video Options not available - Please help!

    Hi.
    I have a 30 GIG iPod Video 5th gen, with the latest iPod updater software installer on it.
    But when I look at the iPod preferences, when it's plugged in via USB, all Video options (manual vs automatic etc) are all greyed out and not available for selection.
    And I can't drag any videos onto the iPod (even with the right video format!).
    It's like the iPod itself doesn't recognised that it is an Video one, like it has a complex and can only deal with music and photos.
    Can anyone help or offer advice?
    Anyone had a similar problem?
    Any help would be greatly appreciated.

    Thanks for your help guys.
    Even with the iPod set to manual, I couldn't drag iPod format videos directly onto it.
    Did a factory restart, and it has fixed the problem.
    And just a note; the options in the video tab will always be greyed out, when the iPod is set to manually update songs.
    cheers!
    bc

  • Please help--Ipod says DO NOT DISCONNECT and I cant stop it-

    I wish there wasd someone I could talk to to walk me thru this.I was updating software, connected ipod and now the update is frozen, and I can't disconnect ipod. Help - I don't know what to do.

    Follow Michael's advice.
    The iPod will always show "do not disconnect" when attached to your PC because there is an active connection there. Think of it as being on the phone, if you pull the plug it will mess up the conversation.
    On the bottom right by your clock you should have a little green arrow. That shows you what USB devices are hooked into your pc. As long as you do not have the iTunes software open, you can double click that icon and it will show you a small grey window. You will a choice that says "USB Mass Storage Device". Click it once to highlight it and then click the "stop" button on the bottom of the same window. You will get a pop up balloon telling you that it is ok to remove the device (your iPod).
    If you have iTunes turned on, you will need to "eject" the iPod by either choosing eject from the file menu or right clicking on your iPod icon in the playlist (left side) of the iTunes software. There is an option in there called "eject iPod" which means that you are done moving files over and that iTunes can release the Ipod and you can use it.
    If you don't have iTunes open, just follow the first step. Don't plug things in during the middle of an operation as that will cause lock ups.
    Also depending on if you have USB 2.0 or not, the process of moving files and updating can be much slower so try to be patient.
    Hope this helps...

Maybe you are looking for

  • Screen has yellow tint

    Whenever I turn my imac on it has a yellow tint. I've done the color calibration. Sometimes it'll turn back to normal, but when I shutdown/sleep and turn it back on it'll turn yellow again. Then other times when I do the color calibration, it won't e

  • Building a adf rich client component dynamically...

    Is it possible to specify the af:selectItem(s) in a af:selctOneChoice using af|forEach where the "items" attribute" calls a client side List or Array? Where can I find for documentation regarding EL expressions and how to call a client side varible i

  • Better off with Sky

    I've had bt broadband for almost 6 months now and up until 3 weeks ago it was fine, now I'm losing my connection randomly on various devices. I've been on the phone to the "bt" call centre and they've noticed a fault at their end and fixed the proble

  • VAMT 3.1 - The specified database is not a valid VAMT database

    Hi everyone, We have a KMS server  with VAMT 3.1 installed. I've successfuly created a VAMT database on a separate SQL Server and can connect to it. I've granted db_datareader and db_datawriter permission to AD security group for  this database; howe

  • Webi 4.0 with Bex Query

    Hi Experts, I am making webi report directly hitting bex query. I dont know much about bex may be you can help me understanding this, i have a Default Value (Global Filter date object) Recieved Date, which is also included in Free Characteristics of