Ipod video needs to be reset when using shuffle songs.

I like to shuffle my 4800 plus songs on my new ipod, but I have noticed that after turning it off for an extended period of time usually a couple hours or over night, it needs to be reset. I have not tried to retore it as of yet, but I plan on to see if that helps. Has anyone else experienced this?
Ipod video 5.5 Windows XP

restore did not work, guess I'll just have to live with it until apple does a firmware upgrade.

Similar Messages

5th gen ipod video makes hard disk sounds when playing certain songs and lags then frrezes when trying to change

it makes a constant clicking noise like its stuck but plays the song fine till i try and change songs. it freezes, but the song still plays fine. any idea on what it could be? 30gb classic...

When the iPod starts to make non-music noises like clicking and stutters, it is a sign that some cluster of your hardisk is going bad.
The Restore do help by Reallocating the bad cluster, so that iTunes don't put any music there, anyway there are pending sectors, which is marked good after several tries, and iTunes put music there. So your problem will come back again, depending on how tender you are with your iPod.
So do a backup as soon as you can, use a 3rd party software if you need to backup from your iPod to portable hardisk, if you haven't backup your iTunes library.

The iPod on my iPhone 4 won't stop shuffling songs. Can anyone help?

The iPod on my iPhone 4 won't stop shuffling songs. Can anyone help?
Thank you in advance for any replies.

I do not know if this has any chance of working.
Hold down the menu button on the iPhone until you get a speaking thing.... Then say, "Stop shuffle(ing)"
I have no idea if this would work.

Ipod resets when using it

My 30 gig 5G ipod random resets when im in shuffle or skipping through songs in my song list. It does it randomly, like right after a new song comes up, it'll reset. I'm not sure, but I looks like its different songs that come up, so i dont think its the song itself. Please help.

I saw this stuff about turining off the EQ in order to solve the problem when in some songs the iPod reset itself.... It works!!!! That's the good news... the bad news... this answer *****!!!! C'mon guys, Apple users deserve more than this!!!!
All begun when I upgrade my iPod to the 1.2 version... Pls guys, if you are one of this few people that you are not upgrade it to the last version.... dont do it!!!
Wait until 1.3.... or at least a minor release 1.2.X
Wow... Im a PC user converted to a MAC one... but I never tought that this kind of ¨bugs¨ happen in this world!!! I'd to see it to belive it

JDBC Connection Reset when using many processes on 64 bit system

Hi,
we've a annoying JDBC connection problem since we migrated our Java server to a 64 bit operating system. Here our environment.
Database Machine:
Oracle 10g
Linux 32 Bit (but same problem on 64 Bit)
Application Servers Machine:
JDBC driver 11.1.0.6
SUN Java 1.6.0_06 64bit
Linux 64 bit (SLES 10 SP2)
We have 6 different Java server processes (but with the same code) which all create some connections to the same database (running on a different Hardware). All 6 Java server processes starting at the same time (via scripts).
Everything was fine, until we migrated the application server machine from 32 bit Linux to 64 bit Linux. From this day on, the half (or one more or less) of our application server processes can't longer connect to the database. The application server processes which have the problem product the following stack trace:
java.sql.SQLRecoverableException: I/O Exception: Connection reset
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:281)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:118)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:224)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:296)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:611)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:455)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:494)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:199)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:30)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:154)
at com.aaaa.utils.db.DbConnectionPool.<init>(DbConnectionPool.java:130)
It looks like a network problem with the system but all other network stuff works without problems, between the two machines.
- We use the thin JDBC driver (no OCI)
- No firewalls are active on both systems
- Both systems are in the same subnet connected to the same switch
- The DNS configuration on both systems are ok (forward and reverse)
- We've found the same problem on different application-server/database-server pairs with 64 bit application server hardware - but not all of our 64 bit server systems have this problem.
- When running application server process and database on the same system (connecting via localhost) the problem does not longer appear.
- The same database machine connected from a 32 bit application server (with 6 different java processes starting at the same time) works without a problem.
We've tried a lot of things to isolate the problem - but with no success.
- Same problem with SUN Java 1.6.0_06 32 bit (on 64 bit Linux)
- Same problem with SUN Java 1.6.0_15 (32 and 64 bit)
- Played with some JDBC connection properties (oracle.jdbc.TcpNoDelay, oracle.jdbc.ReadTimeout, oracle.net.CONNECT_TIMEOUT, oracle.net.disableOob, oracle.jdbc.RetainV9LongBindBehavior, oracle.jdbc.StreamChunkSize) without a positive result.
- We've updated Linux network driver
- We've changed to an completeky other NIC
- We've tried an other Linux 64 distribution
- We've increased the PROCESSES parameter in the init.ora
- We've tried the JDBC driver 11.1.0.6
- We've tried the _g version of the JDBC driver, but the debugging output simply tell us "Connection Reset" without a hint why.
- We've tried a more complex JDBC connect string (
"jdbc:oracle:thin:@(DESCRIPTION=" +
"(ADDRESS_LIST=" +
"(ADDRESS=(PROTOCOL=TCP)" +
"(HOST=host)" + =
"(PORT=port)" +
")" +
")" +
"(CONNECT_DATA=" +
"(SERVICE_NAME=sid)" +
"(SERVER=DEDICATED)" +
")" +
Nothing of this things helped us to isolate the problem.
When we start our application server processes with a long pause (>1 min) between every process start. The problem does not occure. When we start only one application server with the same number of connections as the 6 different application server processes, everything works fine.
We have absolute no idea why
- this only occures on 64 bit Linux
- independent if it's a 32 bit or 64 bit JVM
- does not occure on all 64 bit application server machines / database machine pairs
- never occure on the same 64 bit app server hardware when using a 32 bit Linux
- using the Oracle JDBC 10g driver (10.xxx) there is no problem (but because of other issues, we need to use the JDBC 11g driver)
Does anybody has an idea what our problem is?
Thanks in advance,
greetings

I was recently struggling with this exact same problem. I opened a ticket with Oracle and this is what they told me.
java.security.SecureRandom is a standard API provided by sun. Among various methods offered by this class void
nextBytes(byte[])
is one. This method is used for generating random bytes. Oracle 11g JDBC drivers use this API to generate random number during
login. Users using Linux have been encountering SQLException("Io exception: Connection
reset").
The problem is two fold
1. The JVM tries to list all the files in the /tmp (or alternate tmp directory set by -Djava.io.tmpdir) when
SecureRandom.nextBytes(byte[]) is invoked. If the number of files is large the
method takes a long time
to respond and hence cause the server to timeout
2. The method void nextBytes(byte[]) uses /dev/random on Linux and on some machines which lack the random
number generating hardware the operation slows down to the extent of bringing the whole login process to
a halt. Ultimately the the user encounters SQLException("Io exception:
Connection reset")
Users upgrading to 11g can encounter this issue if the underlying OS is Linux which is running on a faulty hardware.
Cause
The cause of this has not yet been determined exactly. It could either be a problem in
your hardware or the fact
that for some reason the software cannot read from dev/random
Solution
Change the setup for your application, so you add the next parameter to the java command:
-Djava.security.egd=file:/dev/../dev/urandom
We made this change in our java.security file and it has gotten rid of the error.

IPod video fuzzy/blurry and juddrey when played back on video editors

i have recorded many videos on my ipod before but the most recent videos have become fuzzy/blurry when i have uploaded them onto video editors i have tried many different editors but all of them made the video qulity poor, fuzy and juddery. when i play them back on my ipod or PC there absolutly fine but as soon as they are in a video editor the become fuzzy.

(PAL would be less than 768x576 pixels)
BUT...why do commercial DVDs (i.e. the ones I rent from Blockbuster) look ok on my laptop? Do they use better compression or something?
A little "better compression" and a lot of "something".
Yes, commercial DVDs are produced by better compressors, but the primary reason for better quality is better original content. Commercial DVDs aren't shot with consumer DV camcorders, while they are shot using a tripod and carefully lit.
MPG-2 works by looking at image frame to image frame variations - things like camera shake and noise due to poor lighting can cause major frame to frame differences in the video stream causing MPG-2 artifacts.
In addition, the commercial content is just a lot sharper to start with - better lenses, 3 chip cameras with more pixels than DV camcorders, as well as no compression of the shot footage (DV stream content is compressed about 4:1).
It the old computer saying: GIGO
Garbage In - Garbage Out
Now I'm confused! If a monitor has more pixels shouldn't it give a better picture?
Only if your source image has the same number of pixels. Your DVD only has (PAL) 768x576 pixels and if you 'blow them up' to something like 1280x1024 (or larger) on your computer monitor the image with 768x576 pixels will look very soft.

Need help please. When using Safari while banking online I cannot get rid of Pop ups although I have ticket no Pop ups. Any ideas ?

Need your help please. When using Safari while banking online- I cannot get rid of the Pop ups although I have ticked the correct place. Any ideas ?
A few months ago I downloaded a program someone suggested.

Get Adblock or GlimmerBlocker.

Do I need to shut DB when using Veritas Backup Exec 10d w/ Oracle agent?

Hi All,
Do I need to shutdown oracle when we back up the database server using Veritas Backup Exec 10d with the Oracle agent?
thanks.

Not required !!

Time and date need to be reset when the battery dies

Any help on fixing this issue? Computer gives the warning that the power is running low, then turns off with 6% battery left. When I power it up the system needs to reboot completely and each time the date and time need to be reset.. Why is this?

That battery is relatively healthy, say relatively due to the high cycle count, the number of full charge cycles it has had. The lower capacity simply reflects the high number of charge cycles and is not an issue, only a measure of how long the MacBook will work when running on battery power. The voltage is right where it should be for a MacBook, in the range of 11.5 to 12.5 volts...12.3 volts is a strong battery.
Now to the auto-shutdown for lack of a better term - that sounds a lot like something loose inside the MacBook that when jarred shorts/shutsdown the sytem with a loss of basic information. You could try things like an SMC reseet or PRAM reset but I seriously doubt they would have any affect. Best option would be a visit to an Apple store genius bar to have the techs run some diagnostics to see if they can identify something going wrong inside.
Hope this helps and you can find resolution...auto shutdowns of this type are not really good for the system.

DCIteratorBinding reset when using go link

When I use a go link to step to another page in my application the DCIteratorBinding on the new page is always reset (I think the query is always automatically executed).
This does not happen when using a control flow case.
It's a very basic item, so I hope somebody can help.

A go link is not really designed for use within an application. It's supposed to be used for external URLs. So if you use a go link to jump to a page in your app it's the same as the user clearing the URL and starting again with that new URL which, most likely will essentially start a new session. So it's no surprise that everything refreshes.
So why use a go link, just use a control flow case and a commandLink.

IPod Video makes iTunes shut down when I transfer files!Help

I need some help please! I just connected my new iPod 60gb to my laptop and when I try to update files it shuts iTunes down. I have no clue what's happening, I have all the current iTunes /iPod software. Please can somebody help?

i have tried this advice but its not worked.
i have uninstalled and reinstalled itunes about 3 times and it still isn't working. i'm in the process of ressetting my ipod touch and hopefully this will solve the problem but i somehow doubt it. does anybody know what else i can do? except buy a new ipod or computer?

IPod Video needs XP

I just came back from the "Apple Store" after getting frusterated with the new update killing my iPod. The guy in the store successfully restored my iPod after much hastle. I was the instructed to just go home a plug it into my laptop.
Unfortunately now my computer doesnt want to recognize it (because it was restored on an Apple laptop). It wants me to reformatt it for windows. But it will not let me update.
Any suggestions to get it running on XP again?
Thanks
iPod Video Windows XP

You'll need to download the latest iPod Updater Utility and do a Restore on your iPod.
This document will show you how.
http://docs.info.apple.com/article.html?artnum=60983

Iphone randomly shuts down and resets when using the music player

I have been listening to almost the same music list since i got the iphone 3gs at launch. When I upgraded to the latest iOS software, the phone now automatically shuts off and resets on certain playlists. I did a full restore, ddnt work. I even deleted and reloaded my cd's on there, but same issue and its getting very annoying to just have it reset every time some song plays. Anyone have an answer?? please help..

Hi there Julius Ita,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

Need a secure network when using iPad

I have a iMac with an airport extreme card built in. I use a Westell 7500 DSL modem to connect to the internet. The modem has wireless capability. I can establish a wireless network using airport. I went into network preferences and set up WPA2 Personal security and entered a password under the network I am using, but the network is not password secured. When turning on aiport on the iPad, I join my network without having to enter a password. I want to have to enter the password on my ipad when using this network so I am sure others in the area will have to know the password to have access to my network.
Thank you

According to the information you provided, you want to add a security password to secure your network.
Your wireless network is created on your Westell 7500. So if you want to add a password to secure your network, you have to add it on the router settings, not on the iMac settings. If you're not sure how to do that, you have to contact your ISP (internet service provider) for further assistance.

ITunes video playlist does not loop when using apple tv/airplay

I have made a video playlist in itunes, I have made sure that each video file is not set to "skip when shuffled" and I have also gone into appletv settings and ensured that looping is turned on. When I shuffle this playlist, it plays through airplay to my apple tv, but after each video in the playlist has played the playlist stops.
I would like the playlist to continue indefinitely until I decide to press stop. Does anyone have any thoughts on why this does not happen?

looping videos on Apple TV from iTunes
fixed :-)

Ipod video needs to be reset when using shuffle songs.

Similar Messages

Maybe you are looking for