IPod Video to TV not working

I can't seem to get my video to display on TV...
-(I'm using apples cable, and have TV video set to Out, iPod video 60g)
Nothing appears on screen, and audio is just static
I've tried on 3 seperate TVs - all via composite inputs.
The video in question was an iTunes Comedy Central show (Lewis Black)
Are we unable to view d'loaded vid's on TV? Or is there something I'm missing.
Thanks,xandra

Have you tried to play a different video?
No, don't have
How about playing a song to see if the audio works?
no; just static with these cables
Might simply be a bad cable.
I think you're right, Chris.
At this point, I'm pretty sure it's a bum cable.
Tried the following:
connected using dock with S-video + audio cabling (this worked fine)
connected using my older ipod - to composite audio - Also fine, but naturally no video
Only drag is that I bought the cable as part of the Apple Connection Kit. So exchanging just the cable may be an issue (Circuit City)
Thanks, xandra

Similar Messages

Ipod video right headphone not working

i think the prong in my ipod video is out of place, if i hold the jack down and on an angle, it works in both ears but if it moves out of its place, the right headphone wont work. is there a way to fix it by myself? can i move the prong back into place? or do i need to send it in for repairs and if i do will they wipe my hard drive?

wow. i just came across the same problem just a couple of days ago. My ipod was working fine in the morning and when I got off of work I got no sound out of the right earphone. I bought new headphones cause this has happened before and it was the headphones, but like you said, when pressure was applied to the jack it was only then that I got sound out of both earphones. Ive had my ipod for almost two years now and it is still in really good condition and I dont really know what could have brought this on. Is this a pretty common thing to happen? I had a 3rd generation before this one and had to send it back after a year or so because the battery died, but I did not have this problem with that one and was actually a lot rougher on it. Sorry for the long post. Thanks for the input.

IPod Video: Buttons do not work?

Hello -
Recently I picked up my iPod Video to find that I could not turn it on. I tried to flip the switch on top of the iPod from on and off, but nothing happened. I thought it might be out of batteries for some reason, so I charged it for a full night. The charging sign appeared on the iPod, so I thought my problem was solved. However, when I attempted to press any of the buttons or use the click wheel, nothing worked. I tried resetting, restarting, restoring, everything that I possibly could to get it to respond. I've had no luck yet. Anyone know what I can do to fix my iPod? Thanks.

The switch on top is the hold button. It locks the ipod. Make sure that it is not on ( the red is not showing).
With the red not showing, try turning it on.

IPOD VIDEO 30GP IS NOT WORKING HELP PLEASE :(

ok ill tell the whole history i bought an ipod 30 gb when i got home with my ipod i plug it to my pc and my pc never detected it (I installed itunes before plug my ipod) and itunes detected either so next day i went to macshore where i bought it they took it and puted it on a idock then my ipod started and charged for 20 mins and the guy of macshore didnt know what to tell me why my ipod didnt work in home and my wiere is not the problem cuz it works fine with my brother's ipod nano
please if anyone can tell me what to do ill apreciate for life

You might want to make sure that iTunes 7 was
properly installed, (Help > About iTunes) and that
your computer does have USB 2.0 ports.
Older USB ports on the computer can make it really
difficult for the iPod to make a connection.
Is the iPod displaying the Do Not Disconnect screen,
when it is plugged in?
how can you check to see if ports are older

The speakers of my ipod touch 3g are not working. I alrady restarted it but that didn't work

The speakers of my ipod touch 3g are not working. I alrady restarted it but that didn't work

Try:
- Inserting/removing the headphone plug or dozen times or so. Try cleaning out/blowing out the headphone jack:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. You likely have a bad headphone jack
Apple Retail Store - Genius Bar

I am possessing apple iphone4. In my phone while watching video, audio is not working. Volume level is fuul

I Am holding iphone 4.7.1.2. though my volume is full, while on video audio is not working.

Hi klgksharma,
Welcome to the Apple Support Communities!
I understand that you are not hearing sound from the speaker of your iPhone while watching video. In this situation, I would recommend working through the steps in the attached article to troubleshoot.
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Best regards,
Joe

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

2nd video card does not work

I have a spare Mac Pro here so I decided to remove the video card and put it in the one I'm using. Both machines were purchased in '09 and use the same video card (ATI Radeon HD 2600). The two monitors I have hooked into the original video card work fine but the monitors I hooked into the newly placed video card are not working. Under the About This Mac specs >> PCI cards it shows up and says driver is installed. Is there anything special you need to do to get a second video card to work?
Thanks.

I tried the SMC reset. I removed the card and reseated it. I'm seating it in slot 2 because that's the only other one that is x16. The other slots 3-4 are x4. Still nothing is showing up. When I go to System Preferences >> Displays >> Detect Dispalys nothing happens. The two displays plugged into the original video card work fine but the newly installed on does not show up. Here is what the Mac Info is detecting. Maybe this makes sense to someone. Not sure what MSI is referring to and the second video card is reading as "display" instead of "ATI Radeon HD 2600". Link speed on the second card is half that of the original.
About This Mac >> More Info >> PCI Cards >> Slot-1
ATI Radeon HD 2600:
Name:    ATY,Lamna
Type:    Display Controller
Driver Installed:    Yes
MSI:    Yes
Bus:    PCI
Slot:    Slot-1
Vendor ID:    0x1002
Device ID:    0x9588
Subsystem Vendor ID:    0x106b
Subsystem ID:    0x00a6
Revision ID:    0x0000
Link Width:    x16
Link Speed:    5.0 GT/s
About This Mac >> More Info >> PCI Cards >> Slot-2
display:
Type:    VGA-Compatible Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x10de
Device ID:    0x0393
Subsystem Vendor ID:    0x0000
Subsystem ID:    0x0400
Revision ID:    0x00a1
Link Width:    x16
Link Speed:    2.5 GT/s

Video Filter does not work.

Hello.
I have been using Final Cut Pro 4 for a while and it worked fine before. But recently, any function of Video Filter does not work. I apply them to the clip, but the image does not show any changes on Canvas.
Is the software's problem?
Thanks in advance.
Ying

For a reason unknown to me, FCP's preference files (there's 3 of them) will sometimes become corrupted and need to be trashed. Usually the symptoms are things just not working as they did earlier, or weird issues like the 3 Way Color Corrector looks different than before ... stuff like that.
FCP Rescue is a freeware app (yes, you'll need to download it) that will create a backup set of preferences, thereby retaining all of your settings. Then when (not IF, but when) FCP's preferences become corrupted, you can run FCP Rescue to replace the bad set with a fresh new set.
Otherwise you can delete the files yourself (make sure FCP isn't open at the time) and the next time you launch FCP, it will revert back to the factory settings.
-DH

My iPod dispalys this message: "Connect to a computer. Use iTunes to restore." When I connect to a computer, iTunes doesn't recognise it. The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?

My iPod dispalys this message:
"Connect to a computer. Use iTunes to restore." When I connect to a computer, iTunes doesn't recognise it. The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
I have seen the Apple webpage suggesting the "five R's" (including restore). Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data.
I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data.
Thanks in advance!

Did you try a hard reset with the iPod still connected to your PC? Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

The Wi-Fi on My iPod Touch 4G is Not Working (See Description)

The Wi-Fi on my iPod Touch 4G is not working. People were working on my wi-fi, and, since it showed three bars still, I thought it was working. So when I found out it wasn't working, I tried to fix it by myself by forgetting the wi-fi network. Now, when I try to log in, it says that my password is incorrect (even though I know it is right). I think it is not working because I forgot the wi-fi network while they were working on it. I don't know what to do and I would like Wi-Fi to work on my iPod again (and it is working on my computers and my iPad). Can anyone help me? Thanks:)

Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Video tag is not working in firefox how can we remove this error

Video tag is not working in firefox. In this some kind of mmie type error Kindly remove this error .If you have any kind of solution,Please tell me how can it fix it?

Can you post a link to a publicly accessible page that doesn't require authentication (signing on) where you see such a not working video tag?
Do they work here?
*Firefox Videos: http://www.mozilla.com/firefox/video/
See also:
* https://developer.mozilla.org/en/Media_formats_supported_by_the_audio_and_video_elements

My IPOD classic headport is not working properly. The sound is going in and out?

My ipod classic headport is not working properly. The sound keeps going in and out. I have tried changing headphones and checking the settings. Does anyone have any ideas?

Do a Hard Reset
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
If the sound is still the same, but ok, coming from the bottom Dock connector, then try cleaning the headport, using a jet of air or some electronic cleaner.

DVI video out suddenly not working.

That's basically it. I have a 23-inch Cinema HD Display at home and at the the office. Suddenly the video out is not working with either of them. The displays control panel lists the external display, so the system is detecting the connected display.
There is nothing wrong with the displays. I connected an old PowerBook and they light up fine. With my MBP, the power light lights, but nothing is displayed on the Screen.

there's a somewhat similar thread "external monitor stopped working" with no answers
my 17" Studio display works as 2nd mon on other computers
my dvi out does work with a vga monitor and adapter, of course :))
i'm using the dvi to adc adapter -- could this be involved somehow?
my laptop display goes blue when i plug in the external monitor as it should, but the 2nd monitor never wakes up, turns on, etc.

IPod Video to TV not working

Similar Messages

Maybe you are looking for