Ipod w/ touch wheel appears in OS9 but not OSX

I have an ibook G3 mostly running 9.2.2 and the ipod (1.3) will mount fine. When I switch to 10.2.8 it will not mount and no utilities see it.

See
iOS: Device not recognized in iTunes for Windows
- I would start with the followoh that removes and reinstall ALL Aple software, not just iTune
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or               
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

Similar Messages

  • My Ipod Shuffle 3rd Gen appears in Windows but not in Itunes

    It all Started going wrong when i converted all my music to AAC versions and deleted the old versions so it would work in my car. Since then it won't connect to Itunes but shows up in WIndows. It has taken all of my music off but still charges.
    ...Help

    Have you worked through all the suggestions in this Apple support document?
    iPod: Appears in Windows but not in iTunes
    B-rock

  • IPod nano 5th Gen appears in Finder but not iTunes

    I am trying to restore my 5th Generation iPod Nano, but it will not show up in iTunes 12.0.1.26. It does however appear in Finder as a disk image allowing me to access certain directories, like Calendars, Contacts, DCIM, Notes, and Recordings. I've tried resetting the iPod, putting it in Disk Mode, etc. I've gone through all the support. I've tried using iExplorer. Does anyone know anything else I can try?

    Hi jthias,
    Welcome to the Apple Support Communities!
    I understand that your iPod nano is not appearing in iTunes and you have already completed some great troubleshooting. In this situation, I would suggest continuing troubleshooting by completing the steps in the attached iPod nano Troubleshooting Assistant.
    Apple - Support - iPod - iPod nano Troubleshooting
    Best regards,
    Joe

  • Laserwriter 8500 works on OS9 but not OSX

    I have a laserwriter 8500 problem. I just bought a new G5 dual and I have the 8500 pluged in through a router. I can print 'only' using microsoft word that is running on classic. whenever i try to print with any other applications that either run on classic or native on OSX I get an out of paper error. The 8500 shows the yellow out of paper light even though the laserwriter has paper. I can go to my G4 that is on the same network and print to the same printer without the 'out of paper' error.
    So bottom line is, for some reason running OSX, the ONLY way I can get the 8500 to print and not give the out of paper warning is to be priniting out of only one application, MS Word reunning on classic.
    What gives? Obviously it is not the printer, as I can print in one application running classic, and I can print from another (G4) mac on the same network... What is really odd is that the printer shows lights indicating it is out of paper, and it does not change the green (OK) light to yellow until after I request printing on OSX in any application other that MSWord running on classic.
    I would really appreciate so help

    This printer must have one port of every description! Which of the many methods of cabling are you using to talk to this printer? Are you plugging and unplugging, or is the same cabling set-up used in each case?

  • IPod with touch wheel 10GB problem with downloaded audiobooks

    Hi,
    I might have better luck getting my question answered in this forum. I downloaded some audiobooks from iTunes onto my iMac with no problem. The problem arose when I updated my 10GB iPod with touch wheel (yes, a Jurassic age model from an era when NO ONE knew what an iPod was). Of the five audiobooks I downloaded and subsequently transferred to my iPod, I could only get my iPod to open and play two of them. The other audiobook files would simply be skipped over as if they weren't even there.
    I've reset my iPod twice to try and fix this problem.
    Does anybody have any other ideas?
    Thanks,
    Arnel

    I have the same model iPod and downloaded and audiobook from iTunes for the first time a couple nights ago and have a similar problem. The book is in three parts. They all play fine on my iBook but my iPod skips the first two parts and will only play the third.
    When I select part one on my iPod the screen displays the correct length of the segment, then skips to part two and shows the correct length, then finally skips to part three and plays it just fine.
    If I only load part one and part two, the iPod goes through the same process but reverts back to the main menu screen without playing anything.
    I had an idea a short while ago I am going to try when I get home. I did a get info on one of the audiobook files and it says it is the same file format as songs from the iTunes store. However, the extension is different. Protected song files are 'name.m4a' (I think, maybe .m4b) and the audiobook files are 'name.m4p.' I think those are the extensions, for some reason I'm having a brain **** right now. Anyway, I'm going to try changing the audiobook extension to match song file extensions and see if that works.
    My thought is that the different extension for the audiobooks is how iTunes knows to put the files in the 'Audiobooks' list in iTunes instead of 'Music' or 'Podcasts' etc.
    I'll post again after I give it a try.

  • TS1363 "iPod: Appears in Windows but not in iTunes" Isn't working!

    I've tried all of the things in the "iPod: Appears in Windows but not in iTunes" but none of them work.
    I'm on Windows 8 and those are the instrucations I've followed.
    The only thing I haven't done is reset my computer to factory mode but that Isn't an option for me cause I got saved games that can't be backed up.
    I've literaly tried everything in that help page and it doesn't work.
    All I get is the iTouch charging, asking me to trust the computer, I say trust, nothing happens, I check the device manager and it doesn't shw the USB no matter what, I restart the ipod services and the apple software services, nothing happens, I completely take dwn my McAfee firewall and scanning system, it doesn't work, restarting it to make sure no viruses attack, uninstalled Razer Synapsis because it has been a pain in the butt before, that doesn't work, I emptied my Temp file and that didn't work, And in the end the iTouch is charging but not even being see by Itunes and no updates, restarts, reinstallations, uninstallations, checking, researching, and anything else I can do works.
    Can someone please explain why apple tech is such a pain when it comes to Windows 8 and how I can fix this without losing 2 years worth of school and saved games?!?!?!?

    Try a full teardown as in Troubleshooting issues with iTunes for Windows updates?
    A recent poster to forum is suggesting uninstalling WMP from Windows?
    Connect the device to a different compuer and back it up there. You should be able to copy off the library to a portable hard drive. See also Recover your iTunes library from your iPod or iOS device.
    tt2

  • HT1386 iPhone Appears in Windows but not in iTunes

    iPhone Appears in Windows but not in iTunes

    If you are running Windows Vista or later, open up your Start Menu and search for "Services."
    Click on the icon that looks like a smal gear.
    Once you have that window open, Look for the service that says "Apple Mobile Device"
    Once you click on it once, to your left of the window, click "Start this service"
    After you have done that, with the same service still highlighted, Right click on it then click "Properties"
    Once that menu is open, Find the drop down box and make sure the start up is set to "Automatic"
    After these steps are completed, you should have no problem with your iPod Touch, or iPhone not showing up in the iTunes window.
    With regards,
    Jeremy.

  • My iPod Nano 2G shows up in windows but not iTunes I tried the 5Rs

    My iPod Nano( I have 2 neither work) 2G shows up in windows but not iTunes, and does not sync I tried the 5Rs and turning off antivirus/firewall. I have the newest itunes, and have used all the apple troubleshooting docs, to no avail. Help

    Check out this link:
    iPod Appears in Windows but not in iTunes
    I hope this helps!

  • IPod Classic shows up in My Computer, but not in iTunes

    My iPod Classic shows up in My Computer, but not in iTunes. I've gone through the troubleshooting guide, reset it 3 times and put it in disk mode, reinstalled and updated iTunes and still nothing.

    Hey there april_lee!
    I have a website for you that can walk you through the troubleshooting steps on your iPod classic. This will help you determine the source of your issue and hopefully get the iPod working for you consistently again. The website can be found right here:
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • If my  ipod nano already has music on it but not my account will all my stuff be lost when i sync it to my account

    if my ipod nano already has music on it but not on my new account will all my stuff be lost when i sync it to my new accont and would i still be able to add stuff from the old account to my ipod

    All your iTunes Store purchases are linked to the account.  I do not think you can use two accounts with an iPod*, so you will have to choose one account or the other, and use only the things purchased under that account.
    *I've never actually tried, but that's my understanding.  You'd get a better answer by posting in the correct forum.  Try the iPod forums rather than the Using Apple Support Communities forum.

  • I-pod touch works on a Mac but not a PC

    Please help! My I-pod touch works on a Mac but not a PC. When hooked up to a PC, the device is not recognized in I-tunes message, says I-pod in recovery mode and to restore, after checking update and restore, receive unknown error message (9). Have tried unistaling and reinstalling I-tunes, using different USB ports, creating new user, restarting computer, using different PC, and trying to reset by holding sleep/wake and home buttons all to no avail, very, very frustrated, everything is fine on a Mac!!

    I have CA Internet Security Suite Plus 2010, version 6.0.0.264.
    I was wondering about that one in particular.
    Try configuring you CA as per kalda01's instructions in this post:
    http://discussions.apple.com/message.jspa?messageID=10525876#10525876
    (Sometimes switching the security software off doesn't help, but doing the configuration does help. Not sure what's afoot with that, but it has happened with other security-package problems with iTunes in the past.)

  • Events entered in Calendar on iPhone 4S/iOS7 appear in cloud but not on iPhone.

    Events entered in Calendar on iPhone 4S/iOS7 appear in cloud but not on iPhone.

    my iphone will not allow me to save events on the calendar.  I use the plus sign and get a screen to enter the event name and time but when I go to hit save, it is not there.  When I hit "done" which is where the "save" button should be, the screen disappears and the event is not saved.  I tried seeing if all of my calendars were on but that doesn't appear to be the issue.

  • Ipad appears in computer but not in itune

    ipad appears in computer but not in itune

    Make sure the Apple Mobie Device USB driver is properly installed on computer (tap to enlarge image)

  • I have tried to download 5.0.1 on MAC X 10.6.8. Clicking download, I get a question from MAC --save or name application to open. Saving to desktop doesn't work. It appears in download, but not in desktop. What now? in English

    # Question
    I have tried to download 5.0.1 on MAC X 10.6.8. Clicking download, I get a question from MAC --save or name application to open. Saving to desktop doesn't work. It appears in download, but not in desktop. What now?

    On Mac OS, plugins are installed to a common location, usually ''' /Library/Internet Plugins''' for system-wide availability or to '''~/Library/Internet Plugins''' for a specific user. Ref: http://kb.mozillazine.org/Issues_related_to_plugins#Background
    Does Java 1.6.0_31 work on Safari or another browser?
    I also found the following, in case it helps:
    *http://reviews.cnet.com/8301-13727_7-57414869-263/how-to-use-java-applets-in-os-x-after-java-2012-003-update/
    *http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx

  • Why do fonts appear in Keynote, but not in Font Folder?

    I made a misguided move in adding fonts through Font Book and am trying to restore my fonts to a previous iteration.  Strangely though, the fonts appear in Keynote, but not in the usual Fonts folders.  Can anyone shed light on why this might be the case?  More information can be found, under the Mavericks discussion forum, here.

    Suzanne,
    As is my guess, there is now something wrong with those fonts. There are utilities, that can possibly repair them - two mentioned in the article. If you have a backup of the fonts, from when they worked, perhaps just going to that, and reinstalling them will solve the issue. I'd hate to think that they might have to be acquired all over again, but that might be "plan D."
    Periodically, I will copy all of my fonts to DVD (now - used to be CD), just to have them available for new computers, or OS's. Over the decades, I have lost a few to corruption, that could not be repaired. In several cases, I had an older BU, that did work, but have had to buy a few again. Just checked on my workstation, and I've got 19,362, though seldom more than about 350 ever installed at one time.
    This reminds me that it's about time to do another BU, as I will be getting a new workstation and laptop fairly soon, and will need to transfer my fonts to them.
    Good luck, and hope that things can be saved - I hate to loose a favorite font.
    Hunt

Maybe you are looking for

  • SQL Developer 2.1 general performance feedback

    After testing 2.1 for several days, there seems to be a performance regression in the general interface. When running migrations, the application becomes generally unresponsive, unless you click the "run in background" button. By unresponsive, I mean

  • Robohelp 8 File Publishing Issues

    I've recently had to transfer my work to another Robohelp 8 user in my department. I've copied all of the necessary files and folders needed to this person. She is then able to open the project and update it as necessary, but an issue arises when she

  • Once i've downloaded endnote plug-in where do I find it in pages?

    I'm just trying to create a simple bibliography and am having a **** of a time finding where to do it.    It says you have to use endnote plug-in which I've recently downloaded but how does it all connect??  I'm a new Mac user if you can't tell.

  • Related Information link on Vendor & Voucher Component not appearing on 9.1

    Greetings All, I am not able to see the "Related Information link" on the Vendor & Voucher Components. I know this feture is something new and delivered as part of 9.1; Can someone help me out? How can i see this on my components. Thanks in advance.

  • Smartform dynamic cell coloring

    Hello guys I'd like to ask you a question regarding this issue (I'm not really an expert in Smartform development) The question is the following: Is there any way to dynamically set a table cell's color? Rigth now I have an ALV populated with data, a