Ipod  - white screen of death

I have an white 30gb first genteration of the fifth generation video ipods. It will not work. The screen just stays white all the time. If you restart it it goes off then when it starts up the screen is just white. No apple icon.
Have any ideas how to fix it, this started happening after a software update.
Thanks
Taylor

Any help here?
iPod 5th gen (with video) shows blank or white screen.

Similar Messages

  • IPod white screen of death... if I can even get it on.

    So my iPod randomly decided to stop turning on. It does not respond to soft reset at all, and it does not respond when I try and connect it to a computer (I've tried three different ones). The only time it turns on, is in my iPod FM transmitter player in my car, and when I put it in that, I see a blank white screen, and I can't do anything in it. As soon as I take it off, it turns off again.
    Any ideas?
    This is my second iPod, got the first one replaced, but now I'm out of warranty, and I think it's ridiculous that I have to pay to see a fix when there's always SOMETHING wrong with this iPod.

    I'm assuming it MIGHT be the cable, so I will try plugging it into a friend's wall adapter, but if anyone else has any other ideas, please let me know?

  • TS3694 4th Gen ipod white screen of death wont reboot!

    basically ipod touch 4th gen never dropped white screened during ios update tried all the button pushing all the fixes on here etc. didnt work so i did a hard reset through itunes it goes all the way through says verifying ipod restore then says to wait for ipod to restart but it never does! just stays off after it shuts itself down anybody have any ideas? dont tell me to put it into dfu mode (already did that) or take it to apple (there are no stores anywhere even close) an im not paying to have it sent in theres got to be a solution that someone knows of!

    ive saw many posts from you lllaass an they are all for level points you dont read the orginal post an you also no nothing besides hot to put into dfu and restore modes i already said im not paying someone else to fix it someone has a solution just not you so if you have no help go away

  • My iPod touch 4th gen has the white screen of death and won't connect to iTunes to restore.

    I was updating from iOS 6 beta 1 to beta 2 when my ipod froze up and started showing the white screen of death. I've tried the trick where you hold the power and home button for ten seconds and tried to put it in DFU mode to restore. None of these tricks work and my screen is still white. Also I plug it into my Windows Vista computer with iTunes 10.6.3 but it wont show up. I really need help. I don't have warranty or money to buy a new one. My grandmother will heartbroken if $200 goes down the drain.

    Im not developer and I have ios 6 click this link http://www.youtube.com/watch?v=kHvf6Wty0nk&feature=plcp but anyway try putting it into dfu

  • My ipod touch 4th gen. is stuck on white screen of death.

    I recentally had dropped my ipod touch and when i picked it up it was stuck on the white screen of death. I tried to hard restart by holding down the power and home button at the same time, but the screen would only turn off then come right back on. Then i let the power drain. After it would no longer turn on i put it on the charger to find that the white screen would pop right back up. I didnt want to restore it but because its my only option i put it on my compute but itunes couldnt acess it because i had a passcode on it. is there a differnt way to restore it or fix it?  HELLLPPP MEEEE!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPod Nano white screen of death - RESURRECTED! :D

    Alright, here's the deal...A friend of mine has a new iPod Nano and gave it to me because it had stopped working, and was hoping it was worth something to recover. Sorry about the long story!
    It _wouldn't_ turn on. But, when connecting it to the computer via the USB dock cable, it comes on for a few seconds on a grey-whitish screen. Then turns back off, reboots, and tries again. Step 1 step 2. Nothing.
    Although, 'Diagnostics mode' or whatnot it is, does work however. It would still be a faint grey screen, but whiter and more vibrant, as if it's saying "Hey, I'm alive! I'm alive!!!" and I can go through settings and make it (sometimes) change colors, and reboot the iPod.
    I was thinking since iTunes never recognized it (It was plugged in the whole time) that I would drown in just for the sake of it.
    Well, 3 hours later after attempting to kill the poor thing, it... resurrected itself.
    I'm serious, it really seems to have unbelievably done it. When turning it on, I get 2 beeps, but no restart loop, the LCD stays on the white screen though, BUT, here's the good thing.
    NOW, I hear the system 'click' sounds when using the buttons and such that it's going through the menu, good news so far! It seems like it because after the 'boot' sequence (it appears to boot very fast, strangely).
    The good thing is (kinda) https://discussions.apple.com/thread/1517571?start=0&tstart=0 ... So I suspect that somehow, this method of submerging it under water, letting it dry, blowdrying it, and then leaving it in the heat, somehow restored the SD chip inside of it... possibly only for now... I'm going to use this moment to hopefully get all data off the device, and see for one last time if it's fully restorable...
    I have the power! Ok, so I hooked it up to the wall charger (just put the wall connector on the USB cord) and it now beeps two times, and after about 30 seconds or so, I get to the main menu, screen still white, but I can certainly hear the click letting me know I'm 'navigating' the iPod. It doesn't appear to have any music on it, or maybe it does, but I need to connect some earphones first. Or, it supposed to be display the 'sad iPod' icon, but I just don't see it, therefor, I'm blind as to the status of it.
    I likely guess it's the battery, since every time I disconnect it, it goes dead. Yep, just looked back, still on. Yep, still menu clicking. Yep, I can start it with no problems now. Any clue what I can try to do to resolve this? Obviously it's turning on, and it seems to be doing something, it boots, (apparently) so that's a good sign.
    Please, is there any hope at all in this iPod?  At all?
    AND, IT JUST BEEPED 2 TIMES AGAIN! And I was just typing... why did it do this? (Funny thing is, how it still works!) Is that really the menu button clicking? That would explain it, I mean it only plays the menu clicking sound AFTER about 30 seconds of it 'booting' to the iPod firmware, so it obviously has some sort of life to it. If I hook up my earphones... Holy Mac! I hear music! It's alive!!! It's alive!!! Oh my man!!! Yes!
    It has hope, in a way!
    Atleast, I hope, but it works! Freaking amazing! Jamming to some awesome beats right now, some cool hip hop, sound quality you ask? Great, actually! I don't know how, don't want to know, but it seems trying to kill this iPod actually resulted in it being resurrected? How? Who knows! This is awesome! iPod truly CAN have 2 lives, I guess!
    Cool stuff, I swear on that! My favorite song was on here too!
    How to adjust the volume on the iPod Nano? I don't care, it's playing at full volume, and it's awesome!
    The sad thing is, it still has the white screen of death, and the battery is apparently fried still (or needs a good 24-hour charging).
    This iPod has been sitting dead as a dud in the storage room for a good 1 year or so, unused. And now it came back to life in a flash. Unbelievable.
    I love you Apple.

    Your problem was moisture. It was wet inside and sitting around for a year let it all dry up.
    If you get this kind of thing happening, speed the process up by putting the iPod into a zip lock baggie with a dessicant (you know those little silica pouches) or even some rice to absorb the moisture. Let it sit for a few days and it should dry it all out.
    i

  • White screen of death ipod 4th gen

    I got the white screen of death I have tried reseting/ turning it off but it wont work. i even tried holding the volume button DOES not work. I tried to restore it in my computer but i need to enter a passcode to restore but since i cant see anything i cant I tried back up but i need to enter my passcode once again. I tried DFU mode it wouldnt work. I dropped it a month ago then it turned white but i did the reset thing then it worked fine just had to reset it like 10 times a day now it wont reset anymore. How much will it cost to repair if you are out of warrranty.

    Try:
    - iOS: Not responding or does not turn on
    - Try using this program to place the iPod in recovery mode
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar
    What happened when you placed the iPod in DFU mode and then restored?

  • White screen of death ipod touch 4g 32gb [dropped]

    I got my ipod touch 4g 32gb for Christmas 2012, so it's still quite new, i accidently dropped it on the kitchen floor, screen face down [facebook app was currently running at the time] it had a silocon case on it so it wasn't as bad, when i pick up my ipod to check it was alright, the screen was all white [white screen of death].
    I've tried 'home+lock screen buttons' & i have also tried 'Home+lock screen+ volume up buttons' this didn't work.
    my friend suggested that i leave it to drain out and after 24 hours it died out, after about 20-30 mins i put it back on charge and the white screen came back up, i took it off and i'm leaving it for the night and will try it again tomorrow, does any one have any suggestions on other ways i could fix it, please help, thanks.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Could be a loose connection or something worse.
    Apple Retail Store - Genius Bar       

  • How to fix white screen of death on iPod 4g after screen replacement?

    How to fix white screen of death on iPod 4g after screen replacement?

    I would try to reset it before anything else.  To do this press and hold the home and power buttons until the the white screen shows the apple logo (~ 15 secs.).
    If this does not work then more than likely the LCD is damaged.
    btw- The white screen is common after repairs.  The reset fix works 90% of the time.
    iRefresh ltd.
    http://www.ipodrefresh.com

  • My ipod touch 4g got the wsod(white screen of death)

    My Ipod got the white screen of death and now I can't figure out how to fix it. I don't have a warrenty so im keeping that as a last resort and I'm like 90% sure its a hardware problem not software. I also can't enter DFU mode because it won't respond or Turn it off WHAT DO I DO!

    All you can if it is not a hardare problem is to let the battery fully drain. Then after charging fofr atleast an hour try the rest, restore and recovery mode as required.

  • IPod nano 4th gen stuck on White Screen of Death

    So recently my iPod of 4 years has gotten the white screen of death.
    I tried doing the restarting. You know. hold the on/off button then hold MENU and SELECT. Nothing. It just blinks the white screen off and then on.
    Interest to note: I use my ipod nano in the shower (with dock). Maybe the steam from the shower had something to do with it?
    Anyway, thank you.

    I should note that I CAN still use this ipod. I can play songs on it EVEN while my screen is white. Also, when I plug it into my Win7 (32-bit), the iTunes (latest version 1.0.4) recgonizes my ipod and play the songs/playlist from it.

  • I have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?

    i have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Hi my ipod got the white screen of death i hear thats what its called i was wondering if anybody new how to fix it? If someone knew it would be great to have a feedback

    Hi my ipod got the white screen of death i hear thats what its called i was wondering if anybody new how to fix it? If someone knew it would be great to have a feedback

    OMG that happened to my ipod as well... when i checked to see if there was anything that i could do alsmost everyone would tell me to hold the home and power button until it turned off then turn it back on... it didnt work with my ipod but worked with my friends... hopefully it works with yours. And if not but another one thats what i did and now the other one cracked i guess its just luck

  • Ipod stuck on white screen of death cant get to itunes because i cant type in password

    my ipod touch is stuck on the white screen of death and i cannot wipe it and reload ios because in order to hook it to itunes i have to put in my pass and i cant see anything!!! I tried holding the power button and the home key it goes off bthen back to white screen then goes off and stays off.. this also occurs when i hold the home key + power button+ volume up button. I have no idea what to do any help would be greatly apperciated....

    You have to let the battery drain. It should do this fairly quickly since displaying a white screen uses battery. The battery's dead when the screen shuts off, and this will force it to power off. Charge it up and it should power back on.

  • White Screen of Death Questions [PLEASE HELP!]

    If someone actually cares about my issue, they will read all of the following. Let's see how many of you are out here and how many just want to answer simple short questions for reputation.
    Okay, so I've ran into my first ever iPod Touch issue. I've never owned an iPhone, but I have had an iPod in the past and know a bit about them. I'm going to be 100% honest and I need a serious answer because I'm upset and angry. If anyone can be bothered to read the following, THANK YOU. If anyone could help me out in any way by giving me suggestions/tips and/or a solution, THANK YOU. But anything that can help is appreciated.
    I had my board shorts on when this ocurred. I went to the toilet, doing my own business. I had my iPod Touch in my bank pocket which went to about half way down my thigh. The iPod Touch at the time was facing away from my thigh. Pulling down my pants, the iPod Touch hit the tiled floor. It hardly even hit the floor, all I heard was a little click and I realised it was my iPod. It was flat at the time, I picked it up and pressed the Home button immediately to ensure it was okay. It sort of lit up like a white background, but had a very low opacity. Since it was flat, I assumed it was normal.
    Putting my iPod on charge right after my toilet break, I waited and waited for it to charge quickly enough for me to see the screen as I was a little worried not having seen that faded screen before. When the Apple logo was to appear, it gave me a lit up white screen. I was so confused as there were no marks AT ALL on my screen or any other part of the iPod.
    NOTE: My iPod is still under warranty.
    Did my research and came to the conclusion that it was the infamous 'White Screen of Death'. Where do I go from here? I have no clue!
    I have important information such as a To Do list and my Contacts within the iPod. I NEED to retrieve this information. Is there any way I can do this?
    I can still use the iPod, as if the screen were showing. Sounds are working, but there is just a blank, lit up white screen. Sometimes when I hold the Home button, On/Off button & the Volume Up buttoon all at the same time for ~10-20 seconds, the Apple logo comes up as if the screen was all fixed. 5 Seconds later, it goes all funny as if there were faded white lines and a faded white background but still being able to see the logo/screen. When the iPod loads, it just goes back to the lit up white screen.
    Here's another odd thing to this, when I leave my iPod Touch sitting in a spot remotely, without touching it for a few hours, when I come back to it and hit the Home button, the iPod will begin to work fine as if nothing ever happened. No white screen, no nothing, just simply use it as I wish. I can even sometimes lock it, and then unclock it again with it still showing perfectly. However, when I tend to click the On/Off button after this happens, or if I just continue to use it for ~1 minute, it will eventually do the same as the above paragraph in second last sentence.
    This may be important:
    The iPod charges fine.
    The iPod can be used with my computer and iTunes fine.
    To sum it all up, everything can be done, including using the iPod, but with a lit up white screen.
    Here are some questions I have for you guys:
    Will Apple cover this in my warranty?
    If they won't, what should I do?
    How much would a replacement screen cost?
    Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
    What could be the cause and why?
    How can I retrieve that important information? (Contacts & To Do List)
    Have you got any suggestions/tips for me?
    I need this resolved guys. I'm very upset and angry over the whole situation. If a little thump on the tiles like that (it's not like I dropped it or anything) can damage the screen that much, then this devices from Apple can't be very reliable. All I'm asking for is some genuine service/help to resolve my issue. If this can be done, I will be one VERY happy person.
    Daniel

    Will Apple cover this in my warranty?
    As stated above it is not covered by the warranty as it will be deemed accidental damage.  You can try explaining what happened to somebody at the Genius Bar and they may cut you some slack and replace it at no cost.  They might not though as Apple has started to really come down hard on eliminating replacing accidentally damaged iPods at no cost.
    If they won't, what should I do?
    Again, bring it into them anyways and explain what happened.  You have nothing to lose either way.  Otherwise, you really only have 2 other options.  Send it to a third party service center to have them take a look at it and possibly repair the iPod, or do some studying online and learn how to open up the device yourself and take a look.  There are some excellent step-by-step repair guides at http://www.ifixit.com/.
    How much would a replacement screen cost?
    This depends on where or how you have it repaired.  Here is Apple's repair pricing guide.
    http://www.apple.com/support/ipod/service/prices/
    Third party repair centers will cost less and they'll actually swap out the bad part rather than just replace the entire iPod as Apple does.
    Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
    If you have a warranty on it still, I wouldn't quite yet.  Take it to your local Apple store as explained above.  Otherwise, I would only if you feel comfortable working with small electronics and consider yourself handy with them. 
    What could be the cause and why?
    As stated already, it could be a damaged or loose LCD ribbon cable or the LCD screen itself is damaged.  As to what exact component, there is no way to tell.
    How can I retrieve that important information? (Contacts & To Do List)
    Make a backup of the device in iTunes before taking or sending it in for service or before you decide to open it up (if you do happen to go that route).  See here what is included in the backup of the device.
    iTunes: About iOS backups
    If you get a new or replacement device you can restore it from that backup.
    Have you got any suggestions/tips for me?
    As I have already stated numerous times, try taking it into your local Apple Store and see if there is anything can do for you such as swap it out.  Remember that they are not obligated to do so since the damage is technically accidental.  Be kind and polite when explaning what happened. You never know what could happen!
    B-rock

Maybe you are looking for

  • Dynamic target directory with variable substitution

    Hi everyone. I'm trying to save a file in a folder with receiver adapter. This folder is determined in runtime and passed to the adapter with variable substitution. My problem is that in RWB i get a error like this : 'Content of variable XXXXX is not

  • How do I merge PDFs into one.  I have the PDF pack. iOS

      I bought the PDF pack so I could merge PDFs from my email together with an excel page. I seem to missing something to be able to get a complete PDF without having to print and scan. Any ideas?

  • Zero pad a number in BPEL Expression

    Is it possible to zero pad a number in a BPEL expression?  I have a number that needs to be 6 digits wide(080000) and sometimes comes in with only 5(80000).  I was hoping there was a function to do this but I couldn't find one.  Thanks, Tom Henrickse

  • Mail.app will not reopen after closing app

    I am using a MacBook Pro with OS X 10.5.8 and Mail.app 3.6 (936). I have all current updates installed. My problem is that I will be using mail.app (configured as an IMAP account) all day and close the application without any issues, but if I reopen

  • Problem with showing palette component which contains swing components

    hello, I have found a simple problem with jdeveloper IDE but this simple problem delays my project and it make late a big project so help me please. I want to add somes swing components to a JFrame but when I try to show the palette component as usua