IPod Wifi switching on and off

I am able to connect to my home network perfectly however a few days ago, the device started acting strange. Every 5-10 seconds, the wi-fi switches on and in 3-4 seconds, comes back on. This is extremely annoying as whenever I'm doing something online, I have to start all over... Help?

Try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.
There's more to try but let's go a bit at a time.

Similar Messages

  • My wifi switch on and off button isn't working. how do i fix that ?

    After i upgraded to ios 6 , the switch on and off button doesn't work. It is staying at Off. i want do know how to fix that.

    no answers yet, we are many in this situation...

  • Ipod switches on and off by itself - comp uter doesn't recognize

    The ipod keeps switching on and off. When it goes on it shows me all the languages that are offered. Then it shuts off and turns back on again. This is done quickly and my computer can't recognize that the usb is plugged in. I'm able to put it in disk mode but I can't reformat my ipod in that mode. What can I do? It's been 3 days that I've been trying to fix this problem.
    I've also tried reinstalling ipod and itunes from the disk but now itunes can't properly install - I keep receiving a message that says an error has occurred.
    Please help!

    Hi,
    Try doing a restore on your iPod. Hope this works.
    xxmitchxx90

  • I tried to restore my 120 gb iPod and got an error 1413 message - "cannot restore iPod". I started to reset turning the hold switch on and off and now my iPod seems to be permanently locked.

    I tried to restore my 120 gb iPod and got an error 1413 message - "cannot restore iPod". I started to reset turning the hold switch on and off and now my iPod seems to be permanently locked. I had been having trouble syncing music, When I tried to sync, iTunes said it didn't recognize my iPod, even though I was on the iPod page in iTunes which showed the model number and the serial number of my iPod

    I am having essentialy the same problem, but my iPod came from a PC and is now on a PC. The person who gave me the iPod didn't give me the wall adapter piece, so I bought a "Griffin" brand that was said to be compatible with this model. When I first plugged it into the wall, the Apple appeared with a bar underneath as though it was loading the new software. When the bar got to the end, the "plug into the wall" icon reappeared, but when I plug it in to the wall now, that icon is the only thing that shows, even after resetting and trying to run diagnostics.
    When I doc the iPod on a charger I have or plug the USB into my computer and "reset" it, a battery with a charge icon appears, but there is no "motion" in the icon so it doesn't appear to be charging. The screen eventually goes back to the apple then to the "plug it into the wall" icon. HELP!!! Is is possible the wall adapters isn't the right one? Should I be charging through a firewire cable instead (which I also don't have...)?
    Message was edited by: shenards
    Message was edited by: shenards

  • Since upgrading to Lion OS, the wifi connectivity keeps blocking up intermittently and we need to manually keep switching on and off the wifi utility to get the connection back. even locking the preferred wifi network in system preferences does not help.

    Since upgrading to Lion OS 10.7.1, the wifi connectivity keeps blocking up intermittently and we need to manually keep switching on and off the wifi utility to get the connection back. even locking the preferred wifi network in system preferences does not help. This never used to happen with Snow Leopard

    This is a big thank you to Rys Sinnefeldt who posted this fix.
    Rys has made this fix very easy to do and takes literally 2 mins. It involves replacing the Atheros Lion driver 4.0 and replacing it with the snow leopard driver. Don't worry, Rys has made this so simple to do even I could do it and so far I have had no more wifi drops.
    follow this link
    http://rys.pixeltards.com/2011/09/04/osx-lion-wifi.html
    Thanks again to Rys.

  • Iphone 5 - Switchs on and off automatically

    Hello,
    I have just encountered the following problem on my Iphone 5.
    I have bought my phone an year ago and updated IOS to IOS7 and had no issues till now.
    I was playing a game and the device shut down automaticall and immediatly reboots only to shut down again and again.
    Following is the link to the video in this regard.
    http://youtu.be/g9ssPGrZA9Y
    Please let me know of the possible solution to this.
    Thanks in advance

    Try to reset the phone by holding the sleep and home button until the Apple logo comes back again. If this does not help, set it up "as new device" How to back up your data and set up as a new device
    If still no luck, repeat the set up again, this time without using the latest backup, in case it contains corrupt data causing your problem.
    If your device is not recognized by iTunes due to switching on and off, try to connect in recovery mode, explained here: iPhone and iPod touch: Unable to restore

  • Classic: will not recharge; apple logo flashes every few seconds then fades away; have tried the 'reboot' advice i.e. move hold switch on and off, hold menu and center button, no success.  have tried this many times and kept connected for several hours.

    I have a classic, several years old.
    It will not recharge; the Apple logo flashes every few seconds then disappears. 
    I have tried the 'reboot' advice i.e. move the Hold switch on and off, hold the Menu and Center buttons, no success. 
    I have tried this many times and kept the ipod connected for several hours.  And I have tried two different cords, one connected to the desktop computer, one connected to electrical outlet.

    Hi enbridge4,
    If your iPod Classic won't charge or turn on, you may find the following articles helpful:
    Apple Support: iPod won't turn on
    http://support.apple.com/kb/ts1383
    Apple Support: iPod's battery doesn't charge
    http://support.apple.com/kb/ta44551
    Regards,
    - Brenden

  • Extremely difficult to toggle switches on and off in settings in iOS6, on multiple devices, iP5, 4S, 4 and new iPad. Are others finding the same issue?

    Extremely difficult now to toggle switches on and off in settings in iOS6, on multiple devices, iP5, 4S, 4 and new iPad. Are others finding the same issue?

    I solved this by reset of the Wifi (unplug cable and power to both modem and wifi ... wait 60 sec ... plug in modem cable and power ... plug in wifi power and LAN to modem ... restart AppleTV and Mac ... Turn Home Share 'OFF' in iTunes then back "ON" ... it took ~60 sec for the AppleTV to pick up my Mac in computers.

  • The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    it might be a malfunction in your device. you might ave to send it to repairation
    1.ave you try resetting it or restoring it?
    2. did your hold boutons whas working beffor?

  • New 7th generation ipod keeps flashing on and off. Wont charge, and is not being recognized on itunes

    I just got a brand new ipod nano 7th generation. I plugged it into my computer and it began to flash on and off. I tunes will not recognize it and I cant turn it off.I tried reseting it and that didnt work either. My brother then tried and got it working. Said it was fully charged and was able to put music on it and listen to it. Later that day I turned it on and it just continued to flash on and off and the same problems are occuring. Any idea whats going on??

    IPOD NANO FLASHING ON AND OFF
    see if this helps

  • TS3048 unable to connect to keyboard. System does not detect keyboard even after switching on and off. Mouse working fine. Earlier was working fine. Keyboard is not detectable by I mac . Tried a different keyboard same problem.

    Changed batteries of keyboard -initially connected but now does not connect. Used a diffeerent keyboard -same result. Keyboard not seen in bluetooth devices.Switching on and off as well as re booting has not helped. Keyboard light continues to blink.

    Hey Gautam5058,
    Thanks for the question, and welcome to Apple Support Communities.
    The following articles provide troubleshooting steps that may help to resolve your issue:
    Apple Wireless Keyboard: Difficulty during pairing process
    http://support.apple.com/kb/TS1569
    Bluetooth Quick Assist
    http://support.apple.com/kb/HT1153
    You may also want to try resetting your computer's PRAM and NVRAM.
    To resolve this issue:
    1. Turn the Apple Wireless Keyboard off.
              - For an aluminum Apple Wireless Keyboard, hold the keyboard's power button for more than 3 seconds.
              - For a white Apple Wireless Keyboard, turn over the keyboard, and turn the power switch to the off position.
    2. Click the "Continue" button as the Setup Assistant instructs.
    3. Power the Apple Wireless Keyboard back on.
    4. Enter the 8-digit passkey and press Return. Important: You MUST press Return after you enter the 8 digit code.
    Thanks,
    Matt M.

  • My ipod keeps flashing on and off

    My IPOD keeps flashing on and off how do i fix it

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Nokia 6021 - Switching on and off

    I have just received a brand new Nokia 6021 to replace a 6310i which was developing a fault with the on/off switch after 4 years.
    Well, the 6021 is just about impossible to switch on and off. My thumb is now strained after so many attempts. The only way to it is get the edge of something hard and press down really hard for about 10 seconds and then it will switch on/off.
    Is that how it is supposed to work?

    Is it switching off & on without stop??!! anyway, if you have the chance to back up your data then restore factory settings or even using bluetooth to send that video to other phone first, if it's really not responding as you're saying, maybe a power cycle could be useful: turn off the phone by keeping the power button down until you feel 3quick vibrations and turn it back on after 1min, if your phone doesn't support this option, hmm... while am writing this i've had an idea you maybe changed where your camera should save pics so you might have it already on your MC, if not maybe anybody else here have better solution.

  • Iphone keeps switching on and off every 5 mins and on automaticly.

    phone keeps switching on and off every 5 mins automaticly. I don't know what to do. I just did Hard Reset and it still switches off every 5 min. Please help !

    To make sure that this is not  software related, set it back to factory settings, explained in this article:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    You might have to use recovery mode to do so, if it is not recognized in iTunes:
    If you can't update or restore your iOS device

  • Received recent update on Bionic, now I can't switch on and off my 4GLTE to 3GCDMA- anyone know a work around?

    Received recent update on Bionic, now I can't switch on and off my 4GLTE to 3GCDMA- anyone know a work around?

    search is your friend; see this thread:
    https://community.verizonwireless.com/thread/786340

Maybe you are looking for

  • Phone not working after update volume. Battery life resets on own

    Ever since last ISO update phone not working right. Looses volume. Shuts off   Battery life went out to lunch. Texting slow. Any fix yet I see lots of issues. And tec support wants to charge as phone is off warranty. Was working finè before update. V

  • A question about Job Creation

    Hi Expert, By JOB_OPEN, JOB_SUBMIT, JOB_CLOSE, we can schedule a job. When the first two FMs is executed, the job is still in 'scheduled' status. Only when the FM JOB_CLOSE is executed, the job will be in 'released' status. In my applicaiton, I need

  • Unit of measure for Stock and Non-stock Item in CJ20N

    When I attach Material to an activity (item Category N   Non-stock item) in Project Builder (CJ20N), It is peaking its Base unit of Measure as unit. Now when I try to change it, it is showing an error Item category N: Only base unit of measure M allo

  • Watching QT movies on a TV

    Firstly, my apologies for posting this here as I know it doesn't really fit into this forum. Sorry. I'm running an iBook G4 1.33GHz, and would like to be able to watch some of my movies on a TV. What cables do I need to do this? And if it makes any d

  • How to Configure SNMP Counter Monitors

    Hi there, I want to receive a SNMP trap if attributes of the SNMP Agent (JMX MBeans) change in WLS 6.1. I'm playing around with the PetStore example that is part of the package. I enabled SNMP and configured localhost as a TrapHost, great ! Now I wan