Ipod will go to slider screen to be turned off even after hitting cancel it continues and will snap a picture every once in while while this is happening

repair shop said sounded like the on off button is stuck and cant be replaced  any suggestions

wanted to add that i did a reset and restore from phone and then thru apple factory reset and the problem still exists even after all that with no extra apps on phone

Similar Messages

  • My ipad 2 turnes to black screen with the apple icon in the middle, it just hanged and i have to restart it?! so why this is happening ?! is there is an error or something i can do to prevent doing this ?!

    my  new ipad 2 turnes to black screen with the apple icon in the middle while using it or if i just left it locked for a while, it just hanged and i have to restart it?! so why this is happening ?! is there is a productio error or something i can do to prevent doing this ?!
    Appreciate responding as soon as possible.

    No, it's definitely not normal. Your User's Guide recommends a series of troubleshooting steps to go through when your iPad is misbehaving: As you're already in effect doing the first of the main steps, a Restart of your iPad, and that's not curing it, move on to the next .. a Reset.
    To do this, press and hold both the Home and the Sleep/Wake buttons for about 10-12 seconds, until the display blanks and the red Power Off slider appears. Continue holding the buttons until the slider disappears, replaced by the black screen and white Apple logo.
    This shows your iPad is starting to reboot. Release the buttons and allow the process to continue until the Lock screen appears again, then slide the slider to complete the process.

  • N8's screen doesnt turn off even after locking!

    I dont know if someone has reported it here but will like to report it here.
    Sometimes, when i restarts my N8 and lock it, screen doesnt dim or turn off, though screen is locked and there is key symbol on the top. To get rid of this I have to restart phone and how many time, that depends on our luck! This is serious man, I cant keep my screen always on! Expecting quick solution from Nokia. Does anyone here is having same problem? And does anyone has better solution?

    thanks to G8ZoST :
    i've also having the same problem..  but now the problem was clear by G8ZoST idea.. i agree G8ZoST say the correct solution for this problem.. thankz lot

  • My iPod unexpectedly stopped working. It won't turn on even after pressing the power button for 1 minute. My iTunes no longer "recognizes" the iPod and is forcing me to restore it but I'm not sure if that will work! HELP!!!!!!

    Thank you and please respond as fast as possible -----

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • TS3274 I have a black screen with the circle downloading on the i pad but it won't turn off even after using troubleshooting tips. Does anyone know what to do ?

    I have a black screen which has the downloading circle going round and round but which is otherwise frozen and won't respond to
    troubleshooting suggestions for turning it off and rebooting. Any suggestions please ?

    Reboot:  Do this exactly:  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until you see the Apple Logo, then let go of both buttons and your iPad should restart.

  • E66 - Screen does not turn off, but keeps showing ...

    Hi!
    My problem is that quite often the screen does not get completely turned off even after long periods of non-usage. The backlight goes off, but the home screen remains visible.
    On one hand I'm concerned about the effect of this on battery life, and on the other hand, it's quite annoying that I can't bring up that nice high contrast date&time screen with the press of the navi button, I have to unlock the keys or slide open the phone, which is by no means quick.
    The phone's memory content is - apart from a few media files on the memory card - still is in original state.
    Any help would be greatly appreciated, thanks,
    clay
    Solved!
    Go to Solution.

    It's weird, but ever since I posted the question on the boards the problem is gone. :-)
    (I actually disabled UMTS about the same time, so this may be the key.)
    So for now, problem solved. I'll reopen the topic if the problem comes back.

  • So, my iphone 5 will be no where close to dying but when I go to slide to unlock it turns off then turns back on. Or if I go to my camera it turns off and right back on. What's going on?

    So, my iphone 5 will be no where close to dying but when I go to slide to unlock it turns off then turns back on. Or if I go to my camera it turns off and right back on. What's going on?

    Hello amillward92
    Check out the Power section in the article below for troubleshooting your iPod nano.
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Regards,
    -Norm G.

  • Hello! I cant't access home on my IPad after update 7.1.2 .. I slide to open it but i get an empty screen then it turned off and turn on, but still can't access my IPad, please help!!

    hello! I cant't access home on my IPad after update 7.1.2 .. I slide to open it but i get an empty screen then it turned off and turn on, but still can't access my IPad, please help!!

    I had the same problem but looking at what everyone else said, I simpley slowly started to click on all the tabs in the app store, let them load completely, and then clicked back to the updates afterwards. It worked after a little while

  • HT1320 my ipod nano is stuck in the lock position, my  hold switch will not turn off even when I move it, I have restored it and it came back on in the hold position

    My ipod naaIno is stuck in the lock position, my hold switch will not turn off even when I move it.  I have tried restoring it and resetting it and it still comes back on in the hold/locked postion.  It will only play when placed on a docking station and then I cant scroll to pick songs, I can only go to next song using buttons on docking station.

    You will need to have the hold switch replaced.

  • My iPad just died. The gear symbol came up and then the screen went blank (turned off). It was fully charged so that wan't the issue.

    My iPad just died. The gear symbol came up and then the screen went blank (turned off). It was fully charged so that wan't the issue.

    That is indicating that the device has gone into recovery mode. Press just the Power button until the red Power Off slider appears and slide to turn it off. Then power it back up to see if it has exited Recovery Mode. If it has, then you should be good to go.
    If it has not, then the issue you had that caused the iPad to turn off was one that put your device into Recovery mode requiring that you go through the recovery process (i.e., the reset did not process since the issue required a recovery to resolve). Here is a link that explains what you need to do to get out of Recovery Mode in that case:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    This article tell you how to restore your device using a backup:
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    Post back with any questions!
    Cheers,
    GB

  • My ipad mini will not turn on even after a reset.  Any one else experience this and how do you fix it?

    Ipad mini will not turn on even after a reset?  Any suggestions!   While playing angry birds ipad mini froze, hit home button Angry birds shut off, slide bar screen came up, slide bar, went to angry birds again started playing and froze, pushed home button screen went blank and now will not turn on.  Need help!

    Try holding your on/off and home buttons at the same time until you see the Apple logo. 

  • HT4527 I transferred my library to a new laptop and everything appeared on the screen. I turned off the old computer and the library disappeared. How can I make it a permanent transfer as my old computer is being scrapped. Thanks

    I transferred my library to a new laptop and everything appeared on the screen. I turned off the old computer and the library disappeared. How can I make it a permanent transfer as my old computer is being scrapped. Thanks

    Hello Terryfrank,
    Congratulations on your new laptop!  Also, thank you for the details of the issue you are experiencing with transferring your iTunes Library to your new computer. 
    I notice that you are coming from the article “iTunes: How to move your music to a new computer,” and it sounds like you might have used the Home Sharing method outlined in that article. 
    With Home Sharing, you can stream content from another computer, and it sounds like that is how you have it currently set up.  The last step is to import the content to your new computer.  Use these steps on the new computer (while the old computer is on) to import the music to your new computer’s hard drive:
    Once your new computer sees the Home Share from your old computer, click that Home Share on the left side of iTunes on your new computer.
    Select the content in the Home Share that you want to transfer to your iTunes library on your new computer, or choose Edit > Select All to choose all of it. Then, click the Import button in the bottom-right corner of iTunes.
    Wait for the content to finish transferring.
    Additionally, if you want to transfer your playlists, you can export them from the old computer to the new computer:
    Transferring playlists
    If you want not only your content but also your playlists to exist on your new computer, you will want to transfer a copy of all your playlists from your old computer. To do this, choose File > Library > Export Library on your old computer. Save the XML file that is created to your desktop.
    Send the playlists file to yourself as an e-mail attachment, use an external drive, or use file sharing to move the playlists file to your new computer. Once the file is on your new computer, open iTunes and choose File > Library > Import Playlist. The import process will remove any items from the playlists that you didn't share via Home Sharing.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IPad has frozen screen, can't turn off?

    iPad has frozen screen, can't turn off?
    had multi-tasking gesture feature on and was trying to zoon out of a picture.
    Help!!  Thanks  : 0

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Screen does not turn off

    I've been using Arch on a Samsung N130 netbook for over a year now. Over the last few weeks (perhaps with the 2.6.39 kernel upgrade) I've been having a problem that is really starting to annoy me: my screen won't turn off. At first I thought it was a problem with Powerdevil, or screensaver, or with DPMS, but it is not. Running "xset dpms force off" will turn off the screen for about a second, but then it just turns back on. It doesn't matter if I'm running on battery or AC power. I even turned off X and used setterm to turn off the monitor, and nothing.
    Any ideas on how to solve this problem?

    lagagnon wrote:
    On many systems "xset" needs the Xorg server process to be quiet for a while or it fails. You can get around that problem with:
    sleep 2 && xset dpms force off
    Try that and see if it works.
    No good. Same result. The screen turns off for about 1 second and then turns back on.

  • Can not slide slider to use or turn off

    can not slide slider to use or turn off ipod

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Could not save because the ICC profile description is invalid

    I'm getting this error whenever trying to do a "save" or "save as" from Photoshop CC. I've tried converting to different color profiles but that doesn't seem to make a difference. Even if I create a new blank document and try to save it, I get the sa

  • Something's stuck in my iMac disc drive?

    I put a disk in this morning, and I thought I saw out of the corner of my eye a piece of paper or something go in with the disc. I thought I was imagining things, but now it can't read any discs and ejects any disk I put in there. Anybody know how to

  • How & Where to dig back those reversed payment requests by using Key Number

    I have a few payment requests via bank to bank transfer that have been reversed / deleted. Since the transaction have been reversed / deleted, they will not be displayed in the list of open payment request. How & where I can get back those payment re

  • How to fill datasource/table from archive?

    Dear Colleagues! How can I fill a datasource with archived data? I have created the Infostructure and the generic datasource (SD_VBRK_ARKIV). The datasource is available in BW after replication. But when I try to load it with an infopackage it finds

  • Foreign trade data incomplete for item 000280 (Message no. VF074)

    Hi Foreign trade data incomplete for item 000280 (Message no. VF074) When I click on Incompleteness analysis button at Item level, it is showing below fields for few Invoices 1. Business Transaction Type for Foreign Trade (EXART) 2. Statistical value