IPod will not update when plugged in iTunes.

My iPod when plugged into iTunes, it says updating but after about 3 seconds it says that it couldn't update because the Compaq_Owner's Playlist had been deleted or no longer exist. I am not really sure what to do. My iPod is completely empty. If anyone could help me out i'd be greatly appreciative. I really need it before Wednesday of next week because I have a ten hours drive and we all know how radid stations can be.

http://discussions.apple.com/thread.jspa?messageID=607312&#607312

Similar Messages

  • IPod will not update when plugged into computer?

    Just recently my iPod with not update when I plug it into my computer. My iPod does not show up on my Mac or my iTunes. When I plug it in the screen shows the do not disconnect sign. I have tried to reset my iPod and checked for new updates, but they haven't worked. If anyone knows what to do that would be great.
    Thanks

    Yes. Since I installed the new system software (10.4.6) update Sunday night, I cannot update any of my iPods except the iPod video. The iPods also do not show up on my desktop. The battery charges but that's all that happens.

  • Ipod will not update new songs from itunes

    My ipod will not update new songs from itunes. I've purchased several songs from the music store, updated my playlists and as added some from my CD collection and they are not transfering from my library to my ipod.
    I've tried numerous configurations under the preferences - ipod menue but still can't get them to transfer.
    One error I occasionally get is "ipod cannot be updated because there is not enough free space to hold all of the songs in the itunes music library"
    There is plenty of room on my ipod so I can't figure out why. It almost seems as if it is trying to copy all of my songs not just the new ones because all songs in my librbary are checked.

    Thank you for responding.
    Doesn't it have to be on either manual or auto update? What other option is there?
    I will try downloading latest updates.
    I know it will work if I reset it (have done it a few times already). I just hate having to restore factory settings everytime I want to put a new song onthe ipod.

  • My original Ipod 30gb will not charge when plugged in (suspect battery completely dead...). Help

    My orignal 30gb ipod will not charge when plugged in to a power socket. I think the battery has completely run down. Any thoughts?

    Which model is this iPod.  The "original" iPod was 5GB or 10GB, so this must be a 3rd gen iPod, at the earliest.  This document shows all the iPod models.
    http://support.apple.com/kb/ht1353
    If it's a 3rd gen iPod, it has a dock connector, but it needs to be connected to a FireWire port to charge.  It does not charge from a USB port.

  • HT1848 my ipod will not update.  I have plugged it into itunes and authorizing the computer but, it still says that all of the purchased product has not been transfered.

    my ipod will not update.  I have plugged it into itunes and authorizing the computer but, it still says that all of the purchased product has not been transfered.  It keeps telling me to authorize the computer which I have done.  The purchased items were purchased using an $10 gift card, would that have anything to do with it?
    Thanks,

    We won't know until you try the procedure.   The reset will not affect the content of the iPod.
    Stedman

  • I add songs to itunes, but ipod will not update!

    I imported songs onto my itunes library. But when I plug it in the usb to update, it will automatically disconnect after 5 minutes, and the ipod will not update. I've tried adding all music, and just checked songs; both do not not work.
    I have version 7.0.0.7
    I have about 50% of room left on my ipod.
    Any suggestions??

    Hello Rex225
    The best way to resolve the issue is to remove the music from the iPhone and then download the purchase again using the steps in the following article.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Ipod will not update!!! Error (-50)  HEEEELLLLLLP!!!!!

    My ipod will not update to manual when I click the box to update manual. The box under is checked as it should be but after about 40sec of "Updating Ipod" an error box pops up and says "Ipod could not update unknown error (-50)". In addition I am no longer able to play the songs from my ipod through my comupter. I am only able to play songs on my computer already through itunes. Please help.
    HP 2225   Other OS  

    im getting kind of the same problem. i got a new computer with vista on it, and i plugged in my ipod with all the songs on it, and i thought if i set it to put all the songs on my computer it would erase the ones currently on it. i started getting alot of errors saying there wasnt enough space on my 8gb nano, which there should have been enough space but since it wasnt deleting the music already on it.
    after trying a few different setting i decided to try the restore button and it said it couldnt restore. so i closed itunes went to computer and into my ipod, enabled it so i could see hidden folders and then deleted all the F1, F2,F3 and so on folders and tried an update and it worked.
    but something really strange then happened in itunes, it was on my purchased playlist instead of having just my purchased music it had three copies of all my purchased music, but there wasnt three files of each. itunes did this on my previous computer but it made new copies of the files.
    it then worked just like it did on my old computer, but i noticed it wasnt working properly went i got all the album artwork and my new purchased music. now i dont really know what to do, do what i did before and delete the music manually or just wait untill the update in a "few weeks"
    i hope this has been helpful to anyone else with similar problems.
    dell e520   Other OS   windows vista

  • My new iPad mini will not charge when plugged into adapter. Any suggestions?

    my new ipad mini will not charge when plugged into adapter. What should I try?

    Does the charger get warm at all? Plug the cable into your computer with iTunes open. Does it say not charging.? If it does, the cable is good. The iPad will charge very slowly when pluged into your computer.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • My ipod will not update to ios 7

    my ipod will not update to ios 7. it still says it is up to date but its the ios 6.1.3. i waited a day after the up date came out and it still says it is up to date when its not. i did jail break it earlier this year but i just unjailbroke to to get the update.What can i do to get this update?! Please help!!!

    iOS 7 is not compatible with the 4G iPod. 5G iPod and some iPhones and iPas only

  • HT4623 my 2nd. generation ipod will not update the software from 2.2 to 4

    my 2nd. geration ipod will not update the software from 2.2 to 4 or 6.

    Are you sure you have a 2G? A 1G can only go to 2.1 via iTunes but a 1G can go as high as 3.1.3 that you get here:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    Identifying iPod models
    To If you do have a 2G that can go to 4.2.1 by:
    iTunes: Backing up, updating, and restoring iOS software
    For 4.2.1 you need iTunes version 10.X and that requires OSX 105.8 or later.
    If you have 10.4.11 you can only go to iOS 4.1 since that OSX can on go to iTunes 9.X

  • My phone will not charge when plugged in. It doesn't show the charge bar as green

    My phone will not charge when plugged in. It doesn't show the charge bar as green

    Hello alleyfun
    For issues with your iPhone not charging, check out the troubleshooting below to see if you can get it sorted out and working again.
    iPod Displays a Red "X" Icon
    http://support.apple.com/kb/TS1463
    Resolving issues
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
      Make sure that there are no bent pins in the connector. 
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue persists, please contact Apple Support.
    Regards,
    -Norm G.

  • My iPod will not show up in the Itunes device list plus I get an error message

    Hello!
    My iPod will not show up in the Itunes device list plus I get an error message
    " One or more devices is getting too much power from the USB wire" or sumptin like that.
    I've tried this with two wires, so the problem is not there.
    I reseted the iPod to factory settings but it didn't help.
    Anyone??

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another USB port and computer
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • HT201210 My iPhone will not update or restore from iTunes. It's frozen

    My iPhone will not update or restore from iTunes. It's frozen

    You may be in a recovery mode follow this article http://support.apple.com/kb/HT1808
    If you have a backup you can restore your contents by following this article
    http://support.apple.com/kb/HT1414
    Good Luck!

  • My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

    My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My notebook will not charge when plugged in

    My notebook will not charge when plugged in & now will not work at all.  Do you think I need a new battery?

    Battery information is found in SYSTEM PROFILER>HARDWARE>POWER.
    Sometimes the power adapter does not show the light but is still functioning.  (that often the case with mine)  If on the menu bar the icon shows that it is charging, your ok.  If not, I jiggle the connector or snap it and that restores the connection.  If neither works, make certain the the connectors are clean, both on the adapter and the MBP.  Check to see if any of the posts are bent or missing. 
    If still no success, try another adapter if available.  If that does not work, the are issues with the MBP.  If it does, a new will be the answer.
    Ciao.

Maybe you are looking for

  • Selecting using a field that stores a column_name to be used in the where

    I have a table REPORTING_CRITERIA with fields and field values: gl_criteria1 = 'cc.segment5' from_value1= '1123' to_value1= '1130' gl_criteria2 = 'cc.segment5' from_value2 = '1140' to_value2 = '1150' I am trying to run a select where I pull records w

  • Get a specific Http header field from an http request in a component

    Hello, In a custom component that I've created ( which extends ServiceHandler), I'd like to access a specific http header field from the http requests that this component receives. I assume this could be accessible through m_binder or m_service, but

  • Variable Report Filter (Current Year)

    Dear Gurus, I need a report which always will work with current year measure. (Without asking to user in selection screen) The system should automatically assign the current year. I created an object in universe. In definition tab, in the select stat

  • Configure Windows file system repository in local portal system

    Hi can any one give the step by step explanation for Configuring windows file system repository in local portal system . Thanks Kirankumar M

  • Sys_group and resource manager

    Hello. How much CPU % and at which level should I allocate to SYS_GROUP consumer group? 1. Should I allocate 100% CPU to SYS_GROUP at level 1 and distribute CPU at level 2 to users 2. Should I not mention SYS_GROUP in resource plan?