Ipod will start-up then shut off

Hi - need your help before vacation on a long holiday weekend. As of yesterday, my video ipod was working great. Now, when I turn it on or plug it in, it continually tries to turn on by showing the Apple logo then shuts off and keeps doing this. It will not play nor will recognize that it is plugged into the computer or wall. I am using different cords and also went through the 5 "R"s...would love some insight or tricks to make it work.
Thanks a million!

Hi, is the battery fully charged?
If you have already followed the 5rs without success it could be probably a HD issue... I suggest to go to your local Apple Store and ask for support, they can help you if the iPod is under warranty
Bye

Similar Messages

  • Iphone 4s freezing at start up then shuts off and keeps restarting then repeating that process over and over. I have tried to reset the phone two different ways and still this problem occurs after I update it or turn off the phone.

    yes the title says most of what is going on.
    I recently reset my phone, losing all contacts and pictures. It was working fine, then after I updated it, it will not turn on completely.
    It starts up with the apple logo
    -goes to the ios 6 (please slide to open) screen
    -then shuts off
    -and repeats the process unless I shut the phone off manually
    I have tried to hold the lock and the home button down to manually reset the phone
    I have also tried reseting the phone completely previously, and I still have this problem.
    Any ideas?
    Thank you!!

    I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
    When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

  • Mac book air trys to start up then shuts off

    mac book air trys to start up then shuts off

    Hello iphonesouth
    Start with the articles below for issues with not being able to log into your user. It will have you look at starting up in Safe Mode, resetting your NVRAM and other troubleshooting options.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    OS X: Gray progress bar appears under Apple logo during startup
    http://support.apple.com/kb/TS3148
    Regards,
    -Norm G. 

  • My ipod 1st generation wont turn on,the Apple logo will appear but then shut off,anyone know what to do?

    i need help with my ipod touch first generation
    wont turn on except show Apple Logo then turn off
    what do i do?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • 60 GB Ipod will turn on then turn off

    I have a 60 GB Video Ipod, about 2 weeks old. About two days ago i tried to turn it on and it would start up normal, show the screen with just the apple like its loading, but then it would just light up and shut down, making a little noise. It then restarts and repeats this process and just keeps going until the battery wears down. Then it flashes the 'battery is drained' sign and turns off. I tried plugging it in to recharge the battery, but it just recharges for a little while and then begins the 'turn on, restart' process. I think this might be a hardware problem, but i don't see how since its so new and i didnt do anything to it. Any suggestions?

    iPod Only Shows An Apple Logo and Will Not Start Up
    iPod Only Shows An Apple Logo
    See if those help.
    btabz

  • My computer will turn on for a second then shut off.

    I had just shut down the computer 30 min before so when i go back to turn it on i press the on button sounds like its starting up then shuts off it has a full charge took out the battery and tried it again. still doesn't work i kept try to turn it on and on but itll just act like its starting up then shut off. sometimes if i let go of the on button too early the light will just come on then immediately shut off. what do i do everything i own thats apple has been breaking this week.

    - If it is only one app try deleting the app and then redownload/install the app.
    - Reset your iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore your iPod.  First from backup and if problem persists restore to factory defaults/new iPod.

  • I can start my iPod but it will only stay on the Apple icon screen for 5 minutes and then shuts off, what do I do to fix this problem?

    I can start my iPod but it will only stay on the Apple icon screen for 5 minutes and then shuts off, what do I do to fix this problem?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • My iPod 5th gen will not completely turn on it shows the apple symbol then shuts off I have restarted it and tried to plug it into my computer but cannot find it to restart it

    My iPod 5th gen will not completely turn on it shows the apple symbol then shuts off I have restarted it and tried to plug it into my computer but cannot find it to restart it
    Its been like this for awhile and I can not fix it

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My ipod classic turns on with apple logo then shuts off about 30 seconds later, when plugged in my windows and itunes will not recognize it.

    earlier my itunes told me that my files were corrupted and I needed to restore, so I did.  In the middle of the restore I lost internet connection. Now my computer and Itunes will not recognize my Ipod and if it is not plugged in when I turn the Ipod on it only shows the apple logo then shuts off after 30 seconds.  If it is plugged in it will charge, but Itunes and Windows will not recognize it.  I have tried the menu + select shutoff multiple times with no change.  All it will say while it is charging is do not disconnect.

    The clicking sound is your iPod Hardisk, trying to retract and find the boot sector unsuccesfully.
    Hopefully, you can do the iPod Disk Diagnostic as in this great post by tt2., it wont fix your problem, but let you know, how dire is your Hardisk health.
    So only as a last resort, one way, to get the stuck Hardisk head free, is to bang the iPod on a rubber mouse pad, when you reset it, but do it at your own risk, some very lucky guys got it working again for the next 14 months, like myself.

  • I updated my ipod touch, then a while later it said waiting for update then shut off. then started turning on and off, what do i do ?

    I updated my ipod touch, then a while later it said waiting for update then shut off. then started turning on and off, what do i do ?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Macbook Pro starts up, has a small loading bar, and then shuts off.

    Macbook Pro starts up, has a small loading bar, and then shuts off after a few seconds, but the Windows bootcamp partition works fine.
    The repair disc option (using install disc) failed, and the computer cannot locate the original Mac side partition. Only Bootcamp appears under options to "restore from backup" or reinstall. The repair disc options says it should be repaired but doesn't seem to know how.
    Macbook Pro.
    Snow leaopard
    Bootcamped with Windows.
    Any ideas?

    Hold c or option key and boot off the 10.6 installer disk, run DU Repair from there.
    run through this list of fixes 1-8
    Step by Step to fix your Mac
    If it doens't work, you can recover files if you don't have any current OS X file backups, then grab what you can out of Bootcamp
    Use Data Rescue installed on the extenral boot drive ($100) to read the bits of the internal (non-filevaulted) drive to retrieve OS X data files if you can't get them off manually via drag and drop methods.
    Create a data recovery, undelete boot drive
    If you want to clone Windows, use WinClone and another drive. However it's likely compromised, unless it something you did in Windows, like trying to create a new parttition perhaps?
    Then perform a Zero Erase and install of 10.6 as shown here (on the entire drive, not only the parittions), this will give a new GUID partition table, EFI and map off bad sectors, totally fresh everything.
    How to erase and install Snow Leopard 10.6
    You cna use Carbon Copy Cloner to clone the new extenral setup to the new scrubbed internal drive. Recreate Bootcamp and WinClone back or fresh install Windows into Bootcamp like before. OR opt to use virtual machine software which is safer.
    Windows in BootCamp or Virtual Machine?
    Windows 7 can write to the boot drives GUID partition map (unlike XP), this is likely why it's borked now.

  • Ipod nano shows icon of folder with exclamation mark on start nd then shuts

    i just got a new ipod nano i tried to start it after charging it but it shows me an icon of a folder with an exclamation mark and then shuts off.can nybody pls tell me how to d the entire setup from the start to end please

    All i can suggest is that you try and restore it on another computer (maybe a PC) and see if it fixes the problem. I am a service technician and I've done pretty much all the things you've tried on a iPod Video and still had to replace it so it looks like that'll be what you need to do.

  • My wife ran the battery down in her shuffle.  When I plug it in to the wall or computer, it will blink red solid for about 3 seconds and then shut off.  Is the battery that dead, or is something else wrong.  ITunes does not show the shuffle

    My wife ran the battery down in her shuffle.  When I plug it in to the wall or computer, it will blink red solid for about 3 seconds and then shut off.  Is the battery that dead, or is something else wrong.  ITunes does not show the shuffle

    Hi Jennsman40,
    Welcome to Apple Support Communities.
    If this symptom persists even after you charge your iPod Shuffle, see this page for some troubleshooting steps:
    http://www.apple.com/support/ipodshuffle/assistant/itunes/
    Best,
    Jeremy

  • Torch Wont Start, loads partway then shuts off or resets.

    My Torch 9800 was recently went for a swim in rainwater. At first I didn't realize the phone was water damaged, and thought it has just randomly turned off, so I took the battery out, put it back it, and then it started making a static sound. So I immediately removed the battery and put the phone in rice. Unfortunitely got my time lines mixed up and tried to put the battery back in too soon and again the phone started making a static sound. So I took the battery back out, and put it back in rice worried that I'd fryed all the circuits. However, 48 hours later I put the battery back in and the loading screen came up, but when it went to the rogers screen pre-my wallpaper the phone reset and started to load again, then it shut off. Everytime I do a battery pull the led light comes on for a couple seconds, and then it shuts off and nothing happens. So I took the sim card out, and tried the batter again and the phone started to load then shut off.
    I've found that If I leave the battery out for a while the phone will start to load, but either gets stuck at the 2/3 mark and will freeze there, or it'll shut off. Today I tried putting the battery back in, and the phone loaded to my home-screen, but then froze and shut off.
    If I plug my phone into my computer through the USB the phone connects for a second, and then disconnects. I've tried with both the battery in and out.
    I've also tried re-installing the OS through the loader app as mentioned (http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry), and through a force connect with desktop manager (by hitting update button when desktop manager tries to connect with my phone when I first plug it in to my computer, before it resets and disconnects). Both times the phone starts to load the OS, but when it comes to re-initialize the phone, it'll disconnect, then reconnect, but then after 4-5 seconds dissconnect again, and so I get the "Application Loader was unable to connect with your device" error while the loader is trying to recconect to JVM...
    Is there any hope for my phone? I love my torch and was realllly hoping to hold out until Blackberry releases their new phones in the new year.
    I think I might try soaking the phone in 99% isopropanol in hopes in might be just some mineral build up from the rain water.
    But I'd really appreciate any suggestions anyone has to help me try and get my phone working again.
    Thank you.

    Hello...and apologies for the delayed reply!
    Hopefully you already have resolved this...but just in case...
    Applying power to your BB between it getting wet and doing the proper process (including the maximum waiting time) reduces the chances of success. Further, the only thing predictable about moisture intrusion into a BB (indeed, any electronic device) is that the results will be unpredictable. I've seen some come back up right away and be fine. I've seen others never work at all. I've seen still others run for a bit, and then die later. And every thing in between.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My ipod keeps showing the apple symbol then shuts off.

    my ipod keeps showing the apple symbol then shuts off.

    Please tell me that it has NEVER been jailbroke.  If it has never been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

Maybe you are looking for

  • How to get rid of the loading status at the bottom

    The loading status is like how it is in chrome now. I absolutely hate that. I use the addon bar, so why can't i put it back into the addon bar. Its just additional stuff i dont need. I would also like it to be where if you hover over a link you can s

  • Multiple users with the same iPad?

    My daughter has lent me her iPad.  It's currently linked to her Apple account.  If I try registering the iPad on my Apple account, will I be violating the license or screwing up her ability to use the device independently?  Can the iPad work independ

  • Transport import quue

    Hi everybody, I'm experiencing a problem with transport import queue. So I hope somebody have an idée what’s wrong. When I make a transport on DEV, it appears in de import queue (I can see it in SAP and on OS level). After I refresh the import queue

  • StringBuffer and memory issue

    I am having trouble. I have a fairly large string buffer that I use instead of a file. The String Buffer can grow to 5-10 MB. When it grows, it seems that the memory of the JVM basically doubles each time. To grow the string buffer, I append to it ea

  • No Class Found Error on invoking java class from PL/SQL

    Hi There, I have followed instructions on how to create a java proc in the DB to invoke it from PL/SQL. I get a 'java.lang.NoClassDefFoundError' error because it cannot access 'org.apache.axis.description.TypeDesc' in this case. The instuctions say t