Ipod will turn on but nothing appears on screen

ok, so i bought a ipod on ebay the other day! when i got it i charged and turned it on,the backlight of the screen turned on and that was it~there was nothing else! i can here the click wheel but thats it! what can i do to fix it! help me

Hi, I got the same problem. Its a IPod mini and have been using it for the last 8 months. Problem started a couple of week ago. But i can transfer and listen to the songs as i know the order of my playlists on the IPod.

Similar Messages

  • My one month old laptop turns on but nothing appears on screen...help

    MMy laptop turns on but nothing appears on the black screen

    Try to launch your Mac in Safe mode by taking these steps:
    - Click on the Apple sign() at the upper left corner of the Desktop, select 'Shut down' from a drop-down menu;
    - Wait until your computer turns off, then press the Power button(⌽);
    - Immediately after you hear the startup tone, press and hold the Shift(⇧) key. It should be held as soon as possible after the startup tone, but not before the tone;
    - Release the Shift(⇧) key when you see a grey Apple sign() and the progress bar below;
    This will force the system to perform several maintenance routines and load essential system software.
    Once you've seen the Desktop
    - Open Disk Utility application:
    1. Click on Finder at the bottom of your Desktop;
    2. Select Applications folder from Finder's left sidebar and then open Utilities folder (or press Command(⌘)-Shift(⇧)-U), double-click on Disk Utility icon;
    - Choose your main hard drive from the left sidebar ('Macintosh HD', usually);
    - Click on 'Verify Disc' at the bottom right corner, your Mac will perform a diagnostic test. Click on 'Repair Disk' if prompted to fix problems, or follow instructions given on the Disk Utility window;
    - Once the routine finished, click on ""Verify Disc Permissions"", after it's done, click on 'Repair Disc Permissions';
    Wait until it will finish and restart your mac

  • My iMac turns on but nothing appears on screen?

    I just bought an iMac G5 that from someone I know and he told me something was wrong with it. When I turn it on I hear the chime, the light on the front turns on, the fan turns on and I hear disks spinning which sounds like the superdrive. I took it apart thinking it had to do with the motherboard because he said thats what it was and the lights on the motherboard turn on also. What could the problem be?

    You really need to get the install discs from the previous owner, or you can get them from Apple, but you should have them handy. You can try booting from the Leopard disc and using Disk Utility to verufy/repair the hard drive.

  • Computer turns on but nothing appears on the screen

    Hi,
    I have had this desktop computer for about 2 years. I usually use it almost daily and turn it off at the end of the day. Every few months or so the computer would turn on but nothing would appear on the screen. I would have to hold the power button to turn it off then turn in on a couple times or wait until the next day and the computer would turn on and everything would appear on the screen and work perfectly. Last week, the computer once again turned on but nothing appeared on the screen, except this time, after a week, the computer will now turn on except there is still nothing appearing on the screen. I no longer hear the fans running, however, I hear everything else running as normal. I have unplugged and re-plugged in all the cords multiple times and still, nothing.
    Please help! Thank you.

    Kelly, welcome to the forum.
    When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Pc will turn on, but nothing responds.

    My computer  will turn on, but the monitor, keyboard, and mouse do not respond at all. I can't do anything to try and fix It. I booted it once and it tried to do an automatic repair, but then the screen went black and nothing after that. I have tried unplugging everything, and waiting a while, but I still get nothing.
    Any help would be greatful.

    Hello @klock01,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your desktop computer will power on, but the display is blank and the peripheral devices do not respond. I would be happy to assist you in this matter!
    To enable the responsiveness of your mouse and keyboard, as well as the display, I recommend following the steps in this document on Computer Does Not Start (Windows 8).
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Macbook turns on, but nothing on the screen

    I had my macbook pro last september for my birthday, and until last night it had been working properly. but just tonight it won't start up! when i held the power button, the screen stays black although there is this normal sound when mbp's starting. I blind my way and click randomly (hoping to choose the username like i used to) and then the screen's all white-and-gray thing. Any idea why, and how, to fix this? also how much would it cost? thanks

    nothing, my mouse just stops at the edge of my screen. but i have it mirrored. when i turn mirror off then my mouse goes of the screen but nothing happens on the display. i am going to take it in to the store tonight and see if they can send it back and fix it.
    thanks
    chris

  • Mac Book Pro will turn on but stays at blue screen

    I was changing brushes in photoshop and working on a picture when my computer got very staticky and the brush did some very strange things. Then my computer froze. I had to turn it off by the power button. It came back on a few times but everytime I went to work on a picture it would get staticky again and freeze. By around the 4th time, the computer turns on but there is a pattern all over the screen, then it diappears and goes to a blue screen and won't let me do anything. Please help! I hsve been looking online for answers all night but not getting anywhere.

    Hi c, and welcome to Apple Discussions.
    Read about the NVIDIA issue to see if it fits your MBP. If it sounds like it, you'll need to go to an Apple Store or contact Apple to get your MBP tested and fixed for free if it turns out to be the NVIDIA issue.

  • My iPod will turn on, but will not work at all. (please help)

    ok i know about ipods, and this issue is not something that i have come across. when i plug in my ipod to my pc a screen shows on my ipod saying "do nto disconnect" i dont, i want until it is loaded. then the folder with a "!" pops up, and i read on www.apple.com that i am supposed to try the 5 w's, and i have tryed all 5 w's 3 times each. nothing works, nothing. when i click start and click all programs and go to ipod then i click ipod updater i cannot restore my ipod because a message pops up saying "The attached iPod model is not supported by this application." someone please help me.

    Download and install the newest software if you have not already done so. See my post above for the links. After you have done this, try putting the iPod into disk mode and restoring.
    iPod Updater 2006-03-23
    www.apple.com/ipod/download
    iTunes 6.0.4
    www.apple.com/itunes/download
    Putting iPod into disk mode:
    http://docs.info.apple.com/article.html?artnum=93651
    Restoring iPod:
    http://docs.info.apple.com/article.html?artnum=60983
    Best wishes,
    CG
    PS- What do you mean when you say it will not allow you to right click on it? FYI- Sometimes when there's something going on with your iPod's hard drive, it takes a really long time for the computer to respond to commands for it. So, if you're right clicking and then getting an hourglass, please be patient. You'll get there eventually.

  • Ipod will turn on but cut off saying it needs to charge

    2nd generation Itouch. When plugged in will power on to charge and after a minute or two will show load screen then cut off. Repeats that whole process again! What can I do to fix it?

    Try the standard fixes:
    - Reset
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • My ipod will turn on to the home page to wear it says slide to unlock but i cant get it to do anything else?

    my ipod will turn on to the home page to wear it says slide to unlock but i cant get it to do anything else?

    Try to Reset your device. 
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

  • I follow the instructions of swiping up from the bottom for the control panel, but nothing appears. What am I doing wrong or what do I need to be turned on or off?

    I follow the instructions of swiping up from the bottom for the control panel, but nothing appears. What am I doing wrong or what do I need to be turned on or off?

    "If you're on your home screen, where your apps and folders are, you can't."
    I can on mine.
    For anyone having this issue, take your device out of the case and try it naked before trying a reset, restore or Genius Bar appointment.

  • IPod will turn on when I charge it, but then will not turn back on later on

    The only way my iPod will turn on now is if I plug it into the computer. I thought it had to do with the charge, but when I hook it up to the computer it says that it's already fully charged. Has anyone had this problem?
    Thanks!
      Windows 2000  

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    Could be a dead battery

  • My ipod wont turn on but will still hold a charge and power up when pluged in to power. What is wrong?

    My ipod wont turn on but will hold a charge and power up when pluged in to power. What is the problem?

    Try here:
    iOS: Not responding or does not turn on

  • I am having trouble syncing photos with lightroom mobile. Lightroom (on computer) tells me that it's syncing but nothing appears on my I pad. Any comments?

    I am having trouble syncing photos with lightroom mobile. Lightroom (on computer) tells me that it's syncing but nothing appears on my I pad. Any comments?

    however when I try to sync my older ipod with it and upload some new music to it, Itunes keeps telling me that all the previous songs will be erased
    Yes, that's correct. If you don't have the songs that are currently on your iPod also in your new iTunes installation, they will be erased from the iPod if you sync it. Best to start afresh by first transferring all the music on your iPod back to your new computer/iTunes library.
    For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
    Find out how to do that here.
    How to copy iTunes purchases from an iPod or iPhone to a computer.
    For all other non purchased content (your own CDs etc), check out the instructions/suggestions here.
    Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
    Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
    One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Other free programs are Pod Player, SharePod and Floola.
    If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
    iPodRip also has the feature enabling you to reconstruct playlists.
    There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.
    Once all the music is safely back in your new iTunes library, you can sync your iPod as normal.

  • My ipod touch turns on, but it says disabled

    my ipod touch will turn on, but it says that it is disabled and please connect to itunes, i do but itunes doesnt recognize the ipod.

    try restoring the device in DFU mode. while connected to the computer and itunes open, press and hold the power button and home button at the same time and count to 20 then release the top power button while continuing to hold the home button. the screen on the ipod should still be black and you should see a message pop up on the itunes window. follow steps on screen and restore from there

Maybe you are looking for

  • How to change the style of a single component using oracle skin Jdev 10.1.3

    my hole applications is using oracle skin, I only need to change the color of the menuTab, but I don´t want to create a new skin family... I tried this link http://www.oracle.com/technology/products/jdev/101/howtos/adfskins/index.html but the dont te

  • Custom metadata fields?

    I'm trying to find a way to create custom metadata fields so I can better organize my footage.  For example, say I'm filming a bunch of old cars, and I want to sort them by make and model, obviously there's no make and model field by default.  I've r

  • HP Photosmart C6280 not printing straight

    Hi, I've only had this printer for a few months and no matter what I do, I can't get it to print straight. I've done the self test diagnostic page and also the align feature on the setup menu on the printer and that didn't help. I've reloaded paper a

  • Help transferring files from WD Passport external hard drive (previously used with a Dell) to my Macbook pro.

    I was using a PC (Dell) for my work and used a WD Passport to backup all of my files. I own a Mac and will be using a Mac next year. Is it possible to get my files off of my WD Passport external hardrive onto my mac? if so, how?

  • JavaFx Mobile + Swing Problems

    {color:#000000}{color:#ff0000}{color:#003300}The application runs fine when Run As "Desktop(std. execution mode)" & when changed to Run In "Mobile Emulator" gives following Error :-->{color} {color}{color}{color:#ff0000}Error preverifying class javaf