IPod with colour display frozen in 'hold' mode

My iPod with colour display has frozen whilst in 'hold' mode. Toggling 'hold' does not unlock 'hold'. Screen remains frozen despite following reset steps and searching he forums. Anyone got any suggestions or links for me to check out please ?
Thanks, Jeff

The reason I asked about podcasts is that I experienced that problem for much of a year and it was finally fixed with one of the recent updates to iPod and/or iTunes. I also found that Reset may take 10 or more attempts. I know it's a pain, but, just keep trying for a long time. Another thing that may work is to just leave it sit for a day or so until the battery goes fully discharged, then do the Restore.

Similar Messages

  • IPod with colour display loop in restart mode unable to stop

    During a synchronisation of mi 60 GB iPod colour display sync. stopped and iTunes did not work at all until i disconeted the iPod (With the display frozen as it was synchronising). I tried the select-menu stuff and the restart seemed to start. But it was only to enter in an aparent loop where the apple sign apears first, then the display backlight opens and then everything shuts down and retarts...until the battery is empty.
    Trying to connect the iPod to the Mac did not solve anything, the iPod did not apear neither in the finder or in iTunes.
    Any idea before going to Apple services?

    could be reaching a time for a battery replacement, but have a try to put it in disk mode, do a Restore then have a charge for few hours
    Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651

  • IPod with colour display

    Im getting an ipod with a colour display i just wanted to know how often do people have issues with it because i had a mini and i had terrible battery problems. does the ipod 20gb have any known battery problems?

    James,
    normally none of the iPods have battery issues. But I have heard of a very funny story: if the alarm is set by accidence, the default time is 2400 hours, midnight! Most of the people do other things rather than listening to music on the iPod at that time. So the next day when they take it, it is running and the battery is empty (no wonder!). So sometimes this can be the cause for very short battery life...:-)))
    Best
    Roman

  • Service for my Ipod with colour display

    My ipod had a problem of which i notify the nearest country near me(South Africa) since my country(Ghana) had no service center for 2 times of which i had no reply from them?
    The problem is it does not connect with fire wire cable any longer and even with usb cable it takes longer than expected to tranfer music.
    Any one knwos how i can contact apple for support or have it send for servicing?

    http://depot.info.apple.com/ipod

  • Itunes will not recognise my 4th generation 60gb ipod with colour display.

    itunes no longer recognises my 4th generation 60gb pod. It connects the machine for a short time, but I cannot add anything or delete anything from the ipod. It then says safe to disconnect without having requested this. I am using a re3cent version of itunes.I do not wish to loose all my music by syncing the machine and at the moment that appears impossible anyway. Can anyone help?  And while I'm here, is there a simple way to remove gaps in playback on ipods ?  jonnyMDG

    Hello alicee1303
    If the computer recognized your iPod Nano, then the next step would be to try the steps in the following article to isolate and resolve the issue.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Itunes/ipod with colour problem

    recently, ive been having problems with my ipod. i accidently dropped it onto concrete a couple of months back, and since then, it keeps coming up with the sad ipod icon. fortunately, tho im sure it doesnt do it any good, a swift smack to the back of it, and a restart usually gets it to work.
    a couple of days a go, i had a pop-up on itunes saying that my ipod was corrupt, and needed to be restored. i clicked cancel the first time, but it came up again when i restarted itunes. i done this, and everything was fine. no sad ipod icon. however, now itunes wont open when my ipod is connected, but when it isnt, it'll load fine. i've tried it on my other pc without the internet, but that says about the ipod software not being installed properly.
    i also cant access it via my computer on either computer, they both freeze, and stop responding.
    i didnt buy my ipod from apple, so im pretty sure i cant just send it to them to get it fixed/whatever they can do. is there anything i can do, or would it be easier just to get a newer ipod?
    ipod with colour   Windows XP Pro  

    if still does not solve try this
    . Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921

  • Ipod Video Vs. Apple iPod with color display Dock

    Can someone help me with this question, can the Apple iPod with color display Dock works for the fifth generation ipod???? or just works with the universal Dock???

    Can someone help me with this question, can the Apple iPod with color display Dock works for the fifth generation ipod????
    According to the local Apple Store here, the Color iPod dock (M9868G/A) will work with the 5G iPod but is a "loose fit" as far as the seating in the well goes.

  • IPod will not come out of "hold" mode

    Hi. I have a gerneration 3 (i think) iPod (the kind with four round buttons on the front) and have a potentially severe problem. It thinks it is in "hold" mode all the time all of a sudden and will not respond to my pushing its buttons at all. I can't re-set it. The battery is fully charged and it responds when I plug it in or connect it to a computer, but I cannot make the lock icon come off the screen. All my files on it seem to be intact. Does anyone have any tips on what I can do to resolve this issue myself (without having to visit a repair shop). I live very far away from an Apple store and I don't drive. Any info would be much appriciated.
    Thanks!
    iPod gen. three (I think)   Mac OS X (10.1.x)   four buttons on front

    Sorry, I did try that -- it was actually the first thing I thought of to do. I tried it again when you suggested it just to be safe, and conditions stayed the same. Since then I have hooked up my remote (which I never use so I did not think of it right away) and it is responding to the commands I can give it through the remote. Unfortunately the Pod itself remains in hold so I can't use the click wheel or anything. Is there a way to reset it through the remote that you know of? Do these details give you any ideas about what the problem is?
    Thank you
    gen 3   Mac OS X (10.1.x)  
    gen 3   Mac OS X (10.1.x)  

  • Frozen in Hold Mode

    Does anyone know what to do if my mini has the Hold icon showing...cannot reset using Menu and Select method...have slid hold button on and off several times,but still in hold mode.

    Even when it's plugged into a computer...the lock icon is on and the ipod acts locked. It's as thought the hold button is stuck on hold no matter where the actual hold button is. The ipod powers up when plugged in anywhere...it just acts locked.

  • OSX Lion running, but video display frozen.  Safe mode hangs

    When  I started my Mac Pro (early 2008) this A.M. the video display froze (pin wheel stopped spinning), but OSX booted successfully (I could access shared drives from another computer on the network).  I also noted a small black rectangle at the top left of the screen.  I tried booting into safe mode, but it hung at about the 25% point as shown on the progress bar.  The pinwheel was still spinning however.  Power cycled the computer, but the results were the same.  Did all of the above several times with the same results. I booted to a known good Super Duper clone, but it also failed.  I'm guessing the video card has failed, but no way to verify this.   Anything else I can try?

    Referring again to the article, only Macs that shipped with 10.7 can run the AHT from the Internet. A 2008 Mac Pro would have shipped with 10.5. If you have a 10.4 disc, it came with an older Mac and won't work. If you can't find the Applications disc that came with the MP, then you can't run the AHT.
    In that case, I suggest you try booting from the recovery partition. If you can do that, run Disk Utility, repair the startup volume, and reinstall Lion. Probably this won't help, but you will then have ruled out everything except a hardware failure, which is what I think you have.

  • Not waking up with external display in closed clamshell mode.

    Hello all!
    I have the newest Macbook (late 2009), and have had it docked in a BookArc using an external display, keyboard and mouse. Everything has been working perfectly since I got it a couple months ago. I've traveled with the Macbook and redocked it at home a few times. This morning, I woke the computer and the display lit up as usual. A moment later, the display went black, said no signal and the power light went yellow (it's blue when operating). I hit the keyboard and clicked the mouse to wake it again to no avail. Took the Macbook out of the stand, opened the display and it works perfectly. Checked my energy saver settings, fine. Closed the clamshell, redocked, wont wake/start the external display. Took it out of the dock again, everything is fine, rebooted. Docked again, no wakey. I'm using it now as a normal laptop typing this. Any ideas as to suddenly why it wont wake/work with the external display? Thanks!

    Last week I bought an Acer X223W 22 inch display for my MacBook (13-inch, Late 2009) – Model A1342 Polycarbonate Unibody and an Apple Keyboard MB110LL/A - Also using a Apple wireless Magic Mouse but not a BookArc. ( Just leaving on the desk next to the Acer display )
    I've found that you have to have the MacBook connected to the AC Power Supply to keep the MacBook awake when trying to use an external display. It's kinda a pain sometimes, I usually boot up my MacBook before connecting the Display and Keyboard then once I'm logged in......
    and Once everything is loaded I plug in the Keyboard first then The Display adapter cable, Close the MacBook up then Click/Move the Magic Mouse ( System Preferences settings - Bluetooth ( Advanced: Allow Bluetooth Devices To Wake This Computer - checked ) Energy Saver AC and Battery set to 3 hours ( All other settings Unchecked )
    Sometimes takes a few clicks before the Desktop appears on the external display, Now once its on I can open the MacBook ( just enough to help keep it running cooler ) and unplug the AC Adapter unless it needs charging.

  • FUJI F10 works with iPOD with color display

    I purchased a 30GB color iPOD, camera connector, and a FUJI F10 camera and successfully transferred from camera to iPOD and iPOD to iPhoto.
    It isn't listed as supported, so I wanted to pass this info along.

    Welcome to Apple Discussions!
    It may work, but it won't come with the appropriate adapters to fit your iPod right.
    The best bet is the iPod Universal Dock
    btabz

  • Can't seem to upload .TXT files to my iPod with Color Display 80GB

    Hello - I've enabled disk use, but the iPod keeps rejecting any .txt files that I try and put on it. It says in the manual drop it into the 'Notes' folder, but on my Mac, in iTunes, the only folders showing up are Music, Movies, Videos, Podcasts, and then a list of playlists. How do I add notes to this iPod, or can I?
    Thank you for any help you can give.

    Follow the instructions in this article and then add the notes through the Finder.
    (37306)

  • Registering Ipod With Apple

    Hi Folks,
    Hopefully someone can help - have just been on the support pages trying to register my Ipod (with colour display) but the form won't accept the serial number which I am definitely typing in correctly, does anyone have a contact number or email address that I can use to talk to someone about this, am having great difficulty finding one via this site.
    Am in the UK.
    Thanks in advance,
    mark

    There is no email address, but you can find a phone number by clicking on the "contact us" link displayed at the bottom of every page here on the forums.

  • Ipod with Identity Crisis

    I have a 60gb ipod with colour display, which I think is fourth gen. Recently i had problems with it. It was getting stuck on the apple icon at start up. I would turn it on, and then it would stay on the apple icon no matter what i did. I had to drain the battery to get it going again. this happened a few times, and each time i restored it after drainage. I could hear the hd spinning when it was stuck on the icon. Eventually i restored it and it hasnt stuck since.
    But since then whenever the ipod shows in itunes, or in windows, or even in the about section in settings on the actual ipod it says it only has 16gb worth of capacity!!! Can anybody help me with this problem? The ipod is working fine otherwise, its just now I only have a quarter of the capacity i had before. I have already tried renaming the drive.
    Thanks for your help

    If your iPod is recognized in "my computer", changing the drive letter can sometimes resolve this issue.
    Click on control panel/admin tools/computer management/disk management/right click on the iPod to re-assign the drive letter.
    Choose something lower down the alphabet, say 'M' or something similar.
    The iPod can be confused by any other storage devices assigned a similar drive letter even though they may not connected at the same time.
    If the device manager is empty, see this: iPod not appearing in Windows device manager.

Maybe you are looking for

  • Tree-control for data input?

    Hi, I need to program an input screen for values that have hierarchical dependencies (e.g. sums). I feel, the most adequate user-interface would be a tree control, because of the data dependencies and also because the users asked for a possibility to

  • Iphoto splitting photos into separate events

    IPhoto used to have a selection to turn off autosplitting photos into events when importing.  That option is gone.  The best I can find not is to autosplit items into one event per week.  Is there a way to do this (i.e. through the terminal) or is th

  • Wireless Clients getting DHCP IP from other WLAN

    Hi, My client has a wireless setup consisting of a WLC 2112 and about 7 1131AG LWAPPs. There are two SSIDs, say CORP(mapped to VLAN 900) and GUEST(mapped to VLAN 901). Wireless clients get IP through DHCP. DHCP IP is configured in the Dynamic interfa

  • Audiobook purchase on iTunes - "Download error. Tap to retry."

    I bought an audiobook through iTunes last night and am having some trouble with the download. First, it was stuck on "processing" and I read in another thread that I needed to connect to wi-fi, which I have now done. Now, after I enter my iTunes pass

  • I'm Using Windows 7.  Why Does Encore Crash?

    Microsoft changed how programs interact with the pxengine component in Windows 7.  Encore needs an updated pxengine to function properly under Windows 7.  Roxio "owns" the pxengine component, so they have the fix here: Roxio pxengine fix -Jeff