IPod with Mac and windows

I currently have a 1st generation iPod Touch with the iTunes library on my macbook. I am using a windows xp system at the office which also had iTunes installed. Will I be able to sync the iPod with both computers or will this create an issue with the libraries?
Thanks ahead of time!
S

You can't sync can't sync iPod with multiple computers or libraries. If you want to connect and use an iPod on more than one computer or with more than one library you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. The content of iTunes and the iPod are not syncronised in this mode so the two can be different:
Using iPod with Multiple computers
Managing content manually on iPod and iPhone
Syncing Music to iPod

Similar Messages

External Hard Drive Compatible with Mac and Windows?

So my old laptop is a Dell Latitude and I bought a Western Digital external hard drive and put all my files/pics/music on it. The information the WD came with said its compatible with Mac and Windows, but when I plug it into my brand spankin new Macbook, it doesn't register with the computer and won't show up. What's going on?
Message was edited by: philliesphan

I recently ran into that problem. In order to have the hard drive compatible for both PC and Mac it must be in a FAT32 format. In order to do this though all your files will be deleted (in order to reformat). You can do this by plugging in the hard drive into you mac and going under disk utility and there you will find your hard drive and under erase change the format to FAT32 and then you press erase (all will be deleted off the external drive though)

5g with Mac and Windows?

Can I use my 5g ipod with both a Mac and Windows PC? I've been syncing with my Mac but I also have a PC. I downloaded the Ipod updater for Windows XP and installed it. When I connect my Ipod I receive a message that the Ipod cannnot be read and needs to be formatted. Will this formatting erase all data and not allow syncing with the Mac? Thank You,
Charles

Hi Charles, welcome to Discussions. You will need to reformat the iPod with Windows, then it work with the Mac. A Mac formatted iPod will not work with Windows. When it is formatted via the PC, you can resynch with the Mac, to upload your data. After this, set synch to manual, so you can use both computers.

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

Best external hard drive format for use with mac and windows?

This is more of an apple operating system combined with windows operating system question, but being that my OS will upgrade an fluctuate there is not option to choose in the operating system section.
Anyways to the question(s)
This whole prbolem came about when my computer started having issues, I want to back it up and whether I can continue to use my laptop or not I will still be owning an apple in the future. I went to buy a hard for back up and got told that it is not as easy as one would think to transfer files from mac OS to windows OS and vice versa. I have a mac, my boyfriend has a windows computer; we share files. Mostly I just copy his files, but once in a while I give him files too. I have read up and talked to people and only found one solution so far to format the external drive to fat 32 or exfat. I think only mac has the exfat option, but works well between both OSs, correct me if I am wrong.
What is the difference between fat 32 and exfat?
A user posted some good info about formatting. More specifically .Drives, partitions, formatting w/Mac's + PC's
https://discussions.apple.com/docs/DOC-3044
If I do not want to use fat32 or exfat is there a format type that works great for mac saving that I can still at least save files to that were originally on a windows computer? Such as I copy his files from his external drive to my computer and then save them to my external drive.
Is there a better format for file sharing between mac and windows that does not set a 4GB limit?
And a silly question, Can you dual format a hard drive?
Note: This format is for an external hard drive.

I still do not know which format would be the best. That is so that I can use it easily between mac OSX and windows. Is FAT32 the only true option? How limited is it? I heard it is limited to 4GB file size for windows and 32 GB for Mac. Are there other sources I have not found with more concrete information on the limitations of this format?
I really do still need this information and I need to back up my drive before I can take the computer in for service.

Airport express with mac and windows

No problems at all with mac and airport express but I have a vaio with window xp sp2 and a pc with vista home premium and even if they connect to the wireless network they cannot receive an ip address. How can I solve this problem? ( As always, we have to waste a lot of time when we work with microsoft operating systems... ;-)) )
Thanks

Thank you for providing me with the exact model of your PowerBook. This model was available with either an optional or built-in AirPort Card. This card is only able to connect to 802.11b wireless networks with a maximum bandwidth of 11 Mbps. This card is also capable of connecting to wireless networks that use the TKIP encryption protocol. This protocol is used in either the WEP or WPA standard. The card is NOT capable of connecting to wireless networks that use the AES/CCMP encryption protocol that is part of the WPA2 standard.
However, some of the earliest versions of the AirPort Card did not work with WPA's TKIP implementation ... so it is possible that you may not be able to connect to an AirPort Express Base Station (AX) configured for "WPA/WPA2 Personal." It may also be problematic to connect to the same AX if it is configured to use one of the 802.11n modes that offer compatibility to 802.11b/g clients. This latter item does not sound like an issue as you are connecting, but wireless security does.
WEP introduces its own set of "problems." Not to mention, that is it completely un-secure. The following Apple Support article may be helpful in getting all of your wireless clients connected when using WEP: Joining an encrypted WEP or WPA Wi-Fi network

Copy CD with Mac and Windows Files

I have a CD, not copy protected that has both Mac files and Windows files on it. Specifically it is a Printer Driver CD.
When I make an image of it with Disk Utility, the only files in it are the Mac files. I wanted to make a safe backup of the CD, including both the Mac files (for my PB G4) and the Windows files for when I install the print drivers on my new MacBook Pro using BootCamp.
Any ideas as to how to make a copy of a CD that has both Mac and Windows files on it?
Thank you

Are you sure the Windows files aren't there? A lot of CDs are hybrids, and do not show the files that belong on another platform such as Windows. Put it in a Windows computer and check.
Otherwise, buy a copy of Toast and dupe it that way.

What format for my external drive allows use with Mac and Windows?

I got an external hard disk (1 tr) and i want to used it for my windows and mac, i read i can have two partitions one for mac and one for windows, but i dont really want to have two parts, and I read i can format it by fat32 and i can write and read on both os, is that true?
I want to use it for movies, os backups, and files..
Is it true that i can only save files up to 4 GB when the format is fat32?
please advise..

It this case you would need to to go to "Disk Utility" on mac and select 3 partions which will be under the Parition Layout in my screen shot below. "Current" is grayed out that will drop down select 3 partitions and make one NTFS, second Mac OS Extended, third FAT32. Using the FAT32 for both Mac and Windows but the files have to be under 4GB each.

Sync with Mac and Windows issue

I bought my wife an iPod (our first). I use a MacBook Pro and she uses a Windows desktop. I copied all of my iTunes music onto the new iPod for her from my Mac. I downloaded iTunes to her Windows machine and tried to sync with it, but it says the iPod must be reformatted for Windows and that will wipe out all of her music files. Is there a way that I can copy the music files to the Windows machine so that she doesn't have to use my computer to sync? These are not protected files. All were copied from our CDs.

OK first thing to know is that Windows machines can not (without $$$ software) read Mac formatted iPod. However Macs can read and use Windows formatted iPods just fine. So go ahead and format the iPod on the windows machine.
Next, you will want to transfer your library from the Mac to the Windows machine. If your library is smaller than the total capacity of the iPod, then you can plug the iPod into her Windows machine and then configure it (a checkbox) to enable disk mode. Eject the iPod and plug into the Mac. The iPod should show up in the Mac's iTunes, but also on the desk top as a disk drive.
At this point it is a simple matter to copy the iTunes folder from the Mac onto the iPod. Eject the iPod, then plug it back into the Windows machine, and copy the stuff off the iPod (as a disk drive) to the Windows hard drive.
Further help on the subject...
Migrate Your iTunes Library from Windows to Mac (and keep your ratings, play counts and date added)
http://www.tunequest.org/migrating-your-itunes-library-from-windows-to-mac/20061 105/
A Guide to Switching iTunes from Mac to Windows (or Vice Versa)
http://ipod.about.com/b/2007/03/11/a-guide-to-switching-itunes-from-mac-to-windo ws-or-vice-versa.htm
Geek to Live: How to move an iTunes library from a PC to Mac (and back)
http://lifehacker.com/software/itunes/geek-to-live--how-to-move-an-itunes-librar y-from-a-pc-to-mac-and-back-242468.php
HOWTO: Move your iTunes music while preserving library data (when you don’t let iTunes manage your music library)
http://hifiblog.com/past/2006/05/11/howto-move-your-itunes-music-while-preservin g-library-data-when-you-dont-let-itunes-manage-your-music-library/
Cheers,
Patrick

Ipod with mac and pc

I would like to know how to format my ipod in fat 32 and that it works in both mac and pc.
the format of my ipod is mac os plus with register.

You need to connect the iPod to a Windows PC and run "Restore" from the updater. It will format your iPod but you'll be able to use it with Windows and OSX.

Connect Ipod to Mac and Windows

I started to connect my Ipod to my Windows computer. Now I bought an Imac. I want to connect my Ipod to my mac without loose all the songs I have loaded to my Ipod from my Windows pc.
Is that possible ?
Thanks in advance for help.
Cheers from Copenhagen - Frank

Strictly speaking using a Windows formatted iPod on a Mac isn't supported however many people use one without any issue. iTunes will allow you to use an iPod formatted for Windows on a Mac but Apple currently only supports using the iPod shuffle in FAT32 format on Mac. This means you will have to make sure that any time there is a software update available you do this on a PC. If you updated the software while the iPod was connected to the Mac you would end up erasing and formatting the iPod for Mac.
If you only intend using the iPod on the Mac from now on, you could transfer your songs to the computer and then Restore the iPod on your Mac. Restoring will erase and reformat the hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation: Restoring iPod to Factory Settings with iTunes 7
If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers has been introduced with iTunes 7 A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of non iTMS content is designed by default to be one way from iTunes to iPod. However there's a manual method of copying songs from your iPod to your Mac at this link: Two-way Street: Moving Music Off the iPod
If you prefer something more automated there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod, this is just a selection. I use Senuti but have a look at the web pages and documentation for the others as well, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
Senuti Mac Only
iPodRip Mac Only
PodWorks Mac Only
PodView Mac Only
iPodAccess Mac & Windows
YamiPod Mac & Windows
PodUtil Mac & Windows
iPodCopy Mac & Windows

External HDD to be shared with Mac and Windows XP

I wish to share an external HDD via firewire/USB between an ibook G4 on OSX 10.3.9 and Windows XP. Apart from using FAT32 and having partitions for each OS just in case can anyone share any risks considerations I need to be aware of? I intend on having a generic 320Gb Seagate drive installed into an aluminium box but for some reason Lacie seem to be particularly good with Mac's and I can't ascertain why.
ibook G4 Mac OS X (10.3.9) Acer Windows XP

There appears to be some misunderstanding about what systems can read or write what hard drives.
OS X can read and write HPS+ and FAT32 formatted drives, and can read, but not write to NTFS drives. Windows can read and write NTFS and FAT32 drives, and cannot read nor write HPS+ drives. Fresh out of the box the only read/write file sharing is via FAT32 drives.
There are reasonable methods for expanding this capability.
(1) Windows can be given the ability to read and write HPS+ drives by installing MacDrive 6 on the Windows machine. As far as I know there is no software available which gives OS X the ability to read and write NTFS drives - - maybe it exists or is under develpment somewhere.
(2) Both OSX and Windows can read/write files that are on a networked file server regardless of the file system used by that file server. The server hides its underlying file system from clients. Just connecting a network capable HDD to a router is NOT the same thing as having a file server on the network - - the same basic file limitations still exist.

Can I Use a network drive to work with Mac and Windows?

Is it possible to introduce a network drive which can be accessed by both Mac and PC? I manipulate images in Photoshop on my Mac but the software I use to create slide shows is only available in PC format. This software is used more or less universally in the area of photography I am invo;ved with so changing is not an option. Can anyone advise me please.
TC

Yes sure. Any NAS type drive formatted in any way will work. Both Mac OS X and Windows communicate by Ethernet Packets to a Networked drive and it is up to the NAS device OS to translate those Ethernet Packets to the format used on the drive.
Even if you are using a standard external drive connected to a Router or another computer, which is what a NAS is (A self contained computer with Operating System and hard drives), that router or NAS box does all the translating.

Sync Palm treo with Mac and Windows

Have a Palm Treo 650 for both personal and work use. Unse a Windows box at work and a Mac at home. I can sync the Palm with my Mac, and I can sync it with Outlook in Windows, but doing this leads to problems, especially multiple entries in both calendar and contacts.
What I'd like to do is set the Palm up to sync with Outlook on the Windows box, and have it overwrite the data on the Mac when I sync at home. I can't find options for this in iSync 2 (merge data or overwrite device).
Any suggestions?
Steve

Thank you for sharing this information. I'm sure it will help others.
I'll just sit back and enjoy the fact I always use the letter q to pair.
Post relates to: None

Wirless Print Servers with Mac and Windows

I am very new to mac..macbook purchased just this week..facing some challenges but learning at the same time..I have my macbook running thru my wireless network on a Motorola SB4100 Cable modem, D-Link DI 614+ Wirless Broadband router and a d-link DPR-1260 Wirless Print Server..previously I have been using a Windows Laptop..I guess it seems that D-Link print servers are only for Windows systems??? I looked at the manual and it doesn't mention Mac..haven't been able to figure out how to add a prt to the mac and I guess that is why?...you need a seperate print for the mac with it's own wirless prt server? or can you replace the cable modem and router with some apple base station that does everything but then can windows laptop work on the network and wireless prt??
scott

I doubt you need any additional equipment. It should be a matter of setting up using PrinterBut posting your question in the Tiger- Printing & Faxing forum area may get you a faster answer.
http://discussions.apple.com/forum.jspa?forumID=756
It should be a matter of setting up in Printer Setup Utility using the ip address of the server.

IPod with Mac and windows

Similar Messages

Maybe you are looking for