Ipod won't connect? can't register it either

I just got an ipod nano 3rd gen. today. I downloaded the latest version of itunes, just like the directions said. The songs went to itunes without any problems. The problem is: the ipod screen says connected, eject before disconnecting. The little battery at the top doesn't look like it's charging. It's just white/light gray with a little black plug thing in the center of it.
When I plug the ipod in, it automatically opens itunes. But when you try to find a song on the ipod, it says no songs, no music, no files blah, blah, blah. When I click on the little ipod icon in the list on the left side of itunes, it gives me an option to register the ipod later. It looks like my monitor cuts off the right side of the screen, so I don't know if there's a register now option. I even hooked up another monitor, which is about 19 or 20 inches, I guess. It does the same thing. The right side of the screen is cut off. I can click on the ipod icon again, and see the license agreement. I clicked the box at the bottom and hit save. The thing is, part of that sentence saying that you agree to the terms, is cut off.
All I see is:
"I have read and agree to the iPod Software License Agr"
I don't know what the rest of it says. And there is NO scroll bar at the bottom. I've tried shrinking the window and stretching it to the right, but it won't stretch. I don't know if the ipod won't work bc I can't register it or what. I even uninstalled itunes and re-installed it. Still does the same thing. I'm totally confused. ANY help would be appreciated.
Thanks, Randi
I'm also on yahoo messenger:
randi127

Resize the screen resolution to 1024 or larger (right click on desktop and pick Properties then go to the tab for screen resolution).
Patrick

Similar Messages

  • IPod won't connect more than once

    When I plug my iPod into my computer, my iTunes registers and connects and syncs. Perfectly fine. But I want to change some settings on my iPod, such as the album artwork and playlists, and whenever I try to sync it again, my iPod won't connect and my iTunes can't find it, even though its plugged in.
    Help?

    Typically when only one device can connect to the AirPort base station, it may be because it is not properly configured as a NAT router ... which is its default configuration.
    One option is to perform a "factory default" reset on the AirPort, and then, try connecting one or more devices to verify that they now all get network/Internet access. Once verified, you can use the AirPort Utility to configure it per your networking requirements.

  • 10 gig iPod won't connect.....

    Greetings
    I've changed the original battery from the 1st gen 10 gig scroll wheel, but now the iPod won't connect.
    It has lost its charging indicator, but feels warm to the touch. I can still play all the music that is on there, but can't see it via iTunes or finder.
    I can see the ipod via the firewire, i.e. about this mac, more info, firewire, shows that the iPod is connected, but has it listed as version 0.0.
    I've tried this http://support.apple.com/kb/HT1363 but no joy.
    Any ideas from the brains trust?
    Cheers

    Make sure you have tried a different FireWire port, and shutdown (power off) and restart your computer if you have not done so since having this issue.
    You can try a different FireWire cable. If this is a 1st gen iPod, it uses a regular FireWire (400) cable.
    Since the iPod is seen (somewhat), does the iPod show up in Disk Utility? If so, use Disk Utility to reformat (erase) the iPod's hard drive in the Erase tab. Make sure the iPod's hard drive (not the volume indented under the sidebar) is selected in the sidebar. Select +Mac OS Extended (Journaled) as the format type. If that procedure succeeds, run iTunes again and if it is seen now, use the Restore button to install and initialize the iPod's software.
    It is possible that when you opened the iPod to replace the battery, you inadvertently disconnected the hard drive. Therefore, the iPod is "seen" by the system, but the hard drive is not. I have also read some reports that if the replacement battery is just a tad too thick, it puts pressure on the hard drive and causes the platter not to spin. So you may want to open it up again, check the hard drive connection, and try it with the back side off.

  • My ipod won't connect to pc at all

    My ipod won't connect to pc. I tried on a few computers but windows won't detect the ipod and the ipod does not recharge.
    Eventually my ipod ran out of battery and now i cant use it at all, not even as a memory stick because it can't connect to a pc...

    so i'd prob have to bring it to a store and have them look at it, correct? also one more thing, if i uninstall my itunes and reinstall it, will all my music still be there or will everything be gone?

  • My iPod won't connect to my Mac... Help?

    My iPod won't connect with my Mac anymore.
    It connected last time I tried it (four months ago, about). It's a Gen Two or Three (I don't know the difference, sorry) and I haven't changed anything about my Mac since then, or my iTunes.
    If you can help at all, please reply. And don't hesitate to ask for more info.
    EDIT: Oh, and I've tried resetting the iPod, putting it in Disk Mode, using a different USB port and restarting the computer (several times).
    The iPod says "Do Not Disconnect" and the iPod symbol appears on Finder and I am able to access it, but it won't appear in iTunes.
    Message was edited by: Hortaux

    I was having the same problem--no iPod on Desktop, no iPod in iTunes. This fixed it for me, at least:
    1. Open Applications > Utilities > Disk Utility. (My iPod DID show up here, though it wasn't mounted.)
    2. Select the iPod in the disk list on the left.
    3. Click "Verify Disk." (In my case, this revealed an underlying error.)
    4. Click "Repair Disk." (If this works, great--stop here. It didn't work for me...)
    5. Click the "Erase" tab at the top of the right-hand main pane.
    6. Choose Mac OS Extended (Journaled) for Volume Format.
    7. Click "Erase" button at bottom right.
    Almost immediately, my iPod showed up on my Desktop, iTunes launched, and it was as though I had completed a Restore of the iPod.
    Hope that helps....
    David

  • 3rd gen ipod won't connect with firewire.

    3rd gen ipod won't connect to itunes with firewire. USB connects rarely but drains battery quickly. I've rebooted the ipod and computer and updated itunes. No effect. Any remedies besides buying a new ipod.

    Answer to Question 1: - I connected the iPod with the USB, went to Disk Utility and erased the iPod. Now the iPod works with USB.
    Question 2 is still unanswered. Ideas?

  • I´ve forgotten my passcode and my ipod won´t connect or appear in my PC

    I´ve forgotten my passcode and my ipod won´t connect or appear in my PC - any ideas?
    Thanks.

    Place the iPod in Recovery Mode and restore via iTunes.
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If iTunes still does not see the iPod see:
    iOS: Device not recognized in iTunes for Windows

  • IPod won't connect to wifi but the wifi is fine

    My computer's wifi is fine but both mine and my sisters iPods won't connect to the wifi. What's wrong with my iPod?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • 2nd generation ipod won't connect to the internet, and i've never had a problem with it before.

    My ipod won't connect to the wi-fi but our computer will.

    - Reset the iPod. Nothing wil be lost
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset neteworks settings: Settings>General>Rest>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • 40GB Ipod Won't Connect...?

    My 40GB iPod won't connect to the computer when i plug it in. The display comes up with "Do Not Disconnect", but iTunes won't open or anything. It just stays like that.
    I've tried connecting to another USB port, restarting the computer and iPod, but nothing seems to work.

    The only time I use a USB is for my nano because it's not supported by a firewire; otherwise, I'm not a big fan of USB's and use the firewire for my other pod. Have you tried a firewire?
    http://docs.info.apple.com/article.html?artnum=93405
    http://docs.info.apple.com/article.html?artnum=32491

  • Ipod Won't Connect!

    hey
    ok so last night, i figured i'd put some more songs on my ipod... it kept having trouble connecting, but it eventually would... then i accidently pressed the "sync ipod" button, and it erased everything... then i felt a little bit better since i still have all the songs on my computer... but now my ipod won't connect to the computer... i plug it in with the usb cable, and on the ipod, it says Do Not Disconnect... but iTunes does not prompt when i plug it in... and it won't recognize my ipod... help please
    Amanda

    connect the Ipod and then restart the PC
    -reset the ipod
    -put the ipod in disk mode
    -then restore
    follow this article
    http://docs.info.apple.com/article.html?artnum=61711
    Thanks

  • My iPod Touch 5th generation is in recovery mode, and my iPod won't connect to iTunes so I can restore it, any ideas on how to fix it?

    Alright, here are the details: my iPod Touch 5th gen. is stuck in recovery mode, and it won't connect to iTunes so I can restore it. Now, I know I have the latest version of iTunes, I have deleted it & reinstalled it, and even restarted my computer, but it still won't come up in iTunes...What should I do??

    Try:
    - iOS: Not responding or does not turn on
    When it says place the iPod in recovery mode use one of these program
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                         
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar              

  • IPOD won't connect to ITunes.  Mac OS Can't repair the disc and Partition Failed.  Help!!

    Hello,
    I am distraught because my IPod Classic won't connect to ITunes.  My Mac won't even recognize it after a few seconds, and I have to keep resetting for the Mac to recognize it.  Mac OS can't repair the disk, and said to reformat.  I tried to partition, but that failed with the error message: couldn't unmount disc.  I don't mind losing all the files, and am really just hoping that it will work again.  I have virtually zero technical knowledge, and thought I might reach out to see if any savvy users know a trick or two that I might try. 
    Thanks for all your help,
    Mary Louise

    Try:
    - iOS: Not responding or does not turn on
    When it says place the iPod in recovery mode use one of these program
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                         
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar              

  • IPOD won't connect to Windows or show up in itunes...HELP

    Have my daughter's 30 GB 5th Gen Ipod here. When you plug it into the computer with the cord, it will turn on, and charge. However I get a balloon come up that says "One of the USB devices attached to this computer has malfunctioned, and Windows does not regognize it. For assistance in solving this issue click this message." I clicked the message. It shows the Ipod in Device Manager as an "unknown device" and when you try to update the driver, it says there are no better drivers to install than the one currently installed. I have tried the 5 R's step by step several times, and that does not work. I can not restore it because it does not show up in itunes. I have tried it on other computers and it does the same thing. It plays the music she has on it, works fine, but we can not get it to connect to either computer. Her friend's Ipods connect to both our computers fine, and will download songs etc. I also have tried putting it into disc mode to see if it would go into itunes so we can restore it. Same message comes up when you have it in disc mode. I have also tried the "tap on the palm" suggestion, which made no difference at all. It just won't connect. I do have the newest version of itunes downloaded and installed.
    I am at my wits end with this thing! PLEASE help me get this thing to connect.
    Thanks!

    Start with these articles and see if that gets you anywhere (yes I know some of these you already tried) ...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod shows up in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Also this semi-recent interesting post by a user here for a work around when an iPod is in the "recovery mode" looping state...
    http://discussions.apple.com/thread.jspa?threadID=1679535&tstart=0
    Cheers,
    Patrick

  • IPod won't connect or be acknoledged by Windows or iTunes

    The title says it all-I've tried multiple USB cords, and it well acknowledge other iPods, and mine won't be found on other computers.
    I've tried multiple USB ports as well, but the screen just stays as if it were normally on. I've tried all the 5 r's, except restore, because it won't connect. It well connect to the wall chargers and docks using the same USB cord.
    Help? If I'm not here, email me at [email protected]

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • Asset Master Uploading from Legacy

    Hi All SAP Gurus, I am doing the Asset Master Uploading from the Legacy System. I am able to upload the data from transactions AS91, OASV. But I am facing a peculiar problem. I want to uplad the balances in the middle of the year i.e. 1st Feb 09. My

  • How to determine the real (effective) Service Level ov a material?

    Hello Experts, I have Service Levels of for example 92% or 98% for a material set up in the material master data ( MARC-LGRAD ). This shall mean in reality, that I can deliver in 92% or 98% of the cases the needed goods in the right quantity. Only in

  • Final Cut quits unexpectedly at the end of Capture Now

    I've tried searching google and question archives, but I can't tell if anyone is having the same problems as me. I've repaired permissions and verified the disc. I'm using a new 8-core mac pro (a few months old) with 8 gb of ram. I'm importing from a

  • Moving the stock to inspection to unrestricted

    hi,   i completed the flow from gr to destination bin flow but the stock remains in quality inspection not in unrestricted use. how to  move the stock from quality inspection to unrestricted use.(without changing the bin number) Regards muthuraman

  • SQR Error 5543

    I've just finished configuring my new Windows 7 workstation, but I keep getting the error: "(SQR 5543) Specify the Oracle DLL name in the SQR.ini file in [Environment:Oracle] section for ORACLE_DLL entry" After some scouring, I ensured that my Oracle