IPod won't connect or be acknoledged by Windows or iTunes

The title says it all-I've tried multiple USB cords, and it well acknowledge other iPods, and mine won't be found on other computers.
I've tried multiple USB ports as well, but the screen just stays as if it were normally on. I've tried all the 5 r's, except restore, because it won't connect. It well connect to the wall chargers and docks using the same USB cord.
Help? If I'm not here, email me at [email protected]

Try:                                               
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • IPod won't connect more than once

    When I plug my iPod into my computer, my iTunes registers and connects and syncs. Perfectly fine. But I want to change some settings on my iPod, such as the album artwork and playlists, and whenever I try to sync it again, my iPod won't connect and my iTunes can't find it, even though its plugged in.
    Help?

    Typically when only one device can connect to the AirPort base station, it may be because it is not properly configured as a NAT router ... which is its default configuration.
    One option is to perform a "factory default" reset on the AirPort, and then, try connecting one or more devices to verify that they now all get network/Internet access. Once verified, you can use the AirPort Utility to configure it per your networking requirements.

  • 3rd gen ipod won't connect with firewire.

    3rd gen ipod won't connect to itunes with firewire. USB connects rarely but drains battery quickly. I've rebooted the ipod and computer and updated itunes. No effect. Any remedies besides buying a new ipod.

    Answer to Question 1: - I connected the iPod with the USB, went to Disk Utility and erased the iPod. Now the iPod works with USB.
    Question 2 is still unanswered. Ideas?

  • 10 gig iPod won't connect.....

    Greetings
    I've changed the original battery from the 1st gen 10 gig scroll wheel, but now the iPod won't connect.
    It has lost its charging indicator, but feels warm to the touch. I can still play all the music that is on there, but can't see it via iTunes or finder.
    I can see the ipod via the firewire, i.e. about this mac, more info, firewire, shows that the iPod is connected, but has it listed as version 0.0.
    I've tried this http://support.apple.com/kb/HT1363 but no joy.
    Any ideas from the brains trust?
    Cheers

    Make sure you have tried a different FireWire port, and shutdown (power off) and restart your computer if you have not done so since having this issue.
    You can try a different FireWire cable. If this is a 1st gen iPod, it uses a regular FireWire (400) cable.
    Since the iPod is seen (somewhat), does the iPod show up in Disk Utility? If so, use Disk Utility to reformat (erase) the iPod's hard drive in the Erase tab. Make sure the iPod's hard drive (not the volume indented under the sidebar) is selected in the sidebar. Select +Mac OS Extended (Journaled) as the format type. If that procedure succeeds, run iTunes again and if it is seen now, use the Restore button to install and initialize the iPod's software.
    It is possible that when you opened the iPod to replace the battery, you inadvertently disconnected the hard drive. Therefore, the iPod is "seen" by the system, but the hard drive is not. I have also read some reports that if the replacement battery is just a tad too thick, it puts pressure on the hard drive and causes the platter not to spin. So you may want to open it up again, check the hard drive connection, and try it with the back side off.

  • I´ve forgotten my passcode and my ipod won´t connect or appear in my PC

    I´ve forgotten my passcode and my ipod won´t connect or appear in my PC - any ideas?
    Thanks.

    Place the iPod in Recovery Mode and restore via iTunes.
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If iTunes still does not see the iPod see:
    iOS: Device not recognized in iTunes for Windows

  • IPod won't connect to wifi but the wifi is fine

    My computer's wifi is fine but both mine and my sisters iPods won't connect to the wifi. What's wrong with my iPod?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My ipod won't connect to pc at all

    My ipod won't connect to pc. I tried on a few computers but windows won't detect the ipod and the ipod does not recharge.
    Eventually my ipod ran out of battery and now i cant use it at all, not even as a memory stick because it can't connect to a pc...

    so i'd prob have to bring it to a store and have them look at it, correct? also one more thing, if i uninstall my itunes and reinstall it, will all my music still be there or will everything be gone?

  • My iPod won't connect to my Mac... Help?

    My iPod won't connect with my Mac anymore.
    It connected last time I tried it (four months ago, about). It's a Gen Two or Three (I don't know the difference, sorry) and I haven't changed anything about my Mac since then, or my iTunes.
    If you can help at all, please reply. And don't hesitate to ask for more info.
    EDIT: Oh, and I've tried resetting the iPod, putting it in Disk Mode, using a different USB port and restarting the computer (several times).
    The iPod says "Do Not Disconnect" and the iPod symbol appears on Finder and I am able to access it, but it won't appear in iTunes.
    Message was edited by: Hortaux

    I was having the same problem--no iPod on Desktop, no iPod in iTunes. This fixed it for me, at least:
    1. Open Applications > Utilities > Disk Utility. (My iPod DID show up here, though it wasn't mounted.)
    2. Select the iPod in the disk list on the left.
    3. Click "Verify Disk." (In my case, this revealed an underlying error.)
    4. Click "Repair Disk." (If this works, great--stop here. It didn't work for me...)
    5. Click the "Erase" tab at the top of the right-hand main pane.
    6. Choose Mac OS Extended (Journaled) for Volume Format.
    7. Click "Erase" button at bottom right.
    Almost immediately, my iPod showed up on my Desktop, iTunes launched, and it was as though I had completed a Restore of the iPod.
    Hope that helps....
    David

  • 2nd generation ipod won't connect to the internet, and i've never had a problem with it before.

    My ipod won't connect to the wi-fi but our computer will.

    - Reset the iPod. Nothing wil be lost
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset neteworks settings: Settings>General>Rest>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • 40GB Ipod Won't Connect...?

    My 40GB iPod won't connect to the computer when i plug it in. The display comes up with "Do Not Disconnect", but iTunes won't open or anything. It just stays like that.
    I've tried connecting to another USB port, restarting the computer and iPod, but nothing seems to work.

    The only time I use a USB is for my nano because it's not supported by a firewire; otherwise, I'm not a big fan of USB's and use the firewire for my other pod. Have you tried a firewire?
    http://docs.info.apple.com/article.html?artnum=93405
    http://docs.info.apple.com/article.html?artnum=32491

  • Ipod Won't Connect!

    hey
    ok so last night, i figured i'd put some more songs on my ipod... it kept having trouble connecting, but it eventually would... then i accidently pressed the "sync ipod" button, and it erased everything... then i felt a little bit better since i still have all the songs on my computer... but now my ipod won't connect to the computer... i plug it in with the usb cable, and on the ipod, it says Do Not Disconnect... but iTunes does not prompt when i plug it in... and it won't recognize my ipod... help please
    Amanda

    connect the Ipod and then restart the PC
    -reset the ipod
    -put the ipod in disk mode
    -then restore
    follow this article
    http://docs.info.apple.com/article.html?artnum=61711
    Thanks

  • My itunes need a update and i pluged in my ipod awhile doing the updat now my ipod won't turn on and the screen has a itunes ion on it what should i do

    my itunes need a update and i pluged in my ipod awhile doing the updat now my ipod won't turn on and the screen has a itunes ion on it what should i do? i really need the help

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT1535 I would like to move my songs from my ipod nano back on to my freshly reinstalled windows and iTunes.  Can that be done?  I turned off automatic syncing so I can charge up the ipod.

    I would like to move my songs from my ipod nano back on to my freshly reinstalled windows and iTunes.  Can that be done?  I turned off automatic syncing so I can charge up the ipod.  Help!

    You won't be able to, just by navigating out the iPod's photos folder in iTunes. You'll likely need the help of some sort of third party software to get the job done for you.  One thing you'll want to keep in mind about these photos is that they are no longer in their full resolution, but instead are scaled down thumbnail versions that were optimized for viewing on your iPod's Video smaller 2.5" LCD display.
    Here is one such product.
    http://www.macroplant.com/phonetopc/
    Google for more.
    B-rock

  • IPOD won't connect to Windows or show up in itunes...HELP

    Have my daughter's 30 GB 5th Gen Ipod here. When you plug it into the computer with the cord, it will turn on, and charge. However I get a balloon come up that says "One of the USB devices attached to this computer has malfunctioned, and Windows does not regognize it. For assistance in solving this issue click this message." I clicked the message. It shows the Ipod in Device Manager as an "unknown device" and when you try to update the driver, it says there are no better drivers to install than the one currently installed. I have tried the 5 R's step by step several times, and that does not work. I can not restore it because it does not show up in itunes. I have tried it on other computers and it does the same thing. It plays the music she has on it, works fine, but we can not get it to connect to either computer. Her friend's Ipods connect to both our computers fine, and will download songs etc. I also have tried putting it into disc mode to see if it would go into itunes so we can restore it. Same message comes up when you have it in disc mode. I have also tried the "tap on the palm" suggestion, which made no difference at all. It just won't connect. I do have the newest version of itunes downloaded and installed.
    I am at my wits end with this thing! PLEASE help me get this thing to connect.
    Thanks!

    Start with these articles and see if that gets you anywhere (yes I know some of these you already tried) ...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod shows up in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Also this semi-recent interesting post by a user here for a work around when an iPod is in the "recovery mode" looping state...
    http://discussions.apple.com/thread.jspa?threadID=1679535&tstart=0
    Cheers,
    Patrick

  • IPod won't connect to iTunes..have tried it all

    Ok...so a few days ago I plugged my Ipod 160gb classic into my computer to sync to Itunes. Itunes then froze up, so after I ejected it, I reset it. I plugged it back into Itunes and now everything is gone off the Ipod. No big deal, everything was backed up.
    So now when I turn the Ipod on it goes straight to language select menu. I plug it into Itunes and it shows up on My Computer but won't show up in Itunes - it stays froze on "connected -ejected before disconnecting" screen. So I disconnect, and the Ipod goes straight to the black/Apple logo screen for a few seconds before going back to the language select menu.
    I have done the hard reset and the same thing happens.
    I have done the right click/format to Ipod under My Computer with no results.
    I have uninstalled and reinstalled Itunes.
    I have tried different USB cables to connect the ipod to the computer.
    Apple Device Manager is installed. I've started/restarted it as well.
    I have put the Ipod in disk mode and connected to Itunes. It usually freezes on the "do not connect" screen. Sometimes in disk mode, Itunes will say that my Ipod needs restored, so I click on restore. It will go to a dark black screen with the Apple logo with a progress bar at the bottom. Before the bar fills up it will go to the regular black Apple logo screen for a few minutes before going back to being frozen on the "connected -eject before disconnecting" screen. The ipod still won't be shown on Itunes either.
    I have run device manager, updated Apple Device Manager, used the C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers folder and says its up-to date.
    I have gone through the steps in these-
    iPod: Appears in Windows but not in iTunes
    and iOS: Device not recognized in iTunes for Windows
    with no results.
    This is my smart data:
    Retracts: 75
    Reallocs: 200
    Pending Sectors: 16
    Power On Hours: 65
    Start/Stops 20234
    Temp: Current 33c
    So I'm guessing after all the troubleshooting, it would be something hard drive related? Especially since the start/stops have to be high. I just want to make sure what it is before I try replacing the hard drive.
    I know variations of this question have been posted a bunch of times, but I've tried everything I've seen on here. Any help is greatly appreciated, thanks.

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    Also:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

Maybe you are looking for

  • Re-ordering tags using ORDER panel doesnt work in Acrobat X

    I am having major problems re-ordering tags (text and form field) using the Order Panel. When I select a tag from the Order Panel and try to drag it from position #20 up to position #5 it does not work. In fact, my tag completely disappears??? I've b

  • Quick Question: When to use ( ) and when to use [ ] and why the ( *)

    Hi all, A quick question that i'm sure is very simple but is slightly confusing me. I've just started trying to learn Objective-C and am a little confused by ( ) and [ ]. I get that you use the [ ] brackets when you want something specific from an ob

  • Can't launch catalogs

    I'm coming from LR 2.7 on a PC to LR 3.0 on a Mac.  All my catalogs are on my external hard drive.  When I try to open a catalog, I get the error message, "Lightroom cannot launch with this catalog. It is either on a network volume or on a volume on

  • ON-ERROR and ON-MESSAGE

    Is anyone using a stored procedure to trap and intercept Oracle Forms Errors and Messages using the ON-ERROR and ON-MESSAGE Triggers? In order to do this, I would like to store Oracle's Forms error in a table. I have been unable to located the .msg f

  • Navigating between components on jsp page

    Hi, I develop aplication on JSF,ADF BC. I need to focus on a certain component on the page by pressing enter key. For example If I have 3 commandButtons on the bage like but1,but2,but3, by pressing enter key I want to focus on but3 from but1.Anyone w