IPod won't connect or turn on. Help please.

I have an iPod mini, I bought it in July last year, so I haven't had it for even a year. I've had no problems with it until recently.
At first, my iPod wouldn't turn on at all. I charged it and when it finally did turn on, the folder with an exclaimation point showed up. I've tried resetting my iPod, but when the Apple logo dissapears, a line just shows up then fades away and it goes back to the folder picture.
I've tried plugging my iPod in, to use the updater. But it doesn't even say that it's plugged in, neither my computer(Windows XP 2002-03) or my iTunes is accepting my iPod. So I can't restore it if the iPod Updates says it's not even there. I even left it there for 5 minutes, to see if it just needed to load or something, and it still didn't work. I don't think it would be the connecting cord, as after I tried mine I tried my sisters, same problem.
Sorry this was long, but is there anything I can do to fix it? Or do I have to take it down to the iPod store?
I wasn't sure if they'd fix it or not, because I got my iPod in California as a gift from my Aunt, and I'm in Nevada now. Would they still fix it if I had to take it in?
Thanks,
-Epona
Windows 2002-03   Windows XP  

See if any of these help.
Try these.
iPod won't turn on.
iPod battery doesn't charge.
Your Windows PC doesn't recognize the iPod is connected.
iPod shows only an Apple logo and doesn't start up.
When restoring the iPod, it's often useful to put it into disk mode first.
Putting iPod into disk mode.
If you take it to an Apple store, you should be able to get repair or exchange no matter where it was bought.
Just recently I exchanged some phones at a different Apple store to where they were bought.

Similar Messages

  • Ipod touch randomly connects and disconnects? help please!

    Agh! I'm so frustrated! So basically, I'll plug in my ipod touch via USB 2.0 cable, and it on the screen the battery icon will come up like normal, then all of the sudden it will turn to my wallpaper like its not connected, then back to the battery and switch back and forth randomly! I've tried two different USB cables now and I get the same result with both! I know they work because my ipod charges fine with my AC wall charger thing. The next strange thing is the fact that whenever I plug in the ipod and it stays with the battery icon for a little while, a windows thing prompts that I have plugged in a camera, and asks what I want to do with it? I always just say cancel. Also if it switches from connect to disconnect long enough iTunes will come up with an error message saying something like "The iPhone "" could not connect... blah blah blah. (error code something similar to Ex80000035 i think.)" I haven't had trouble syncing in the past! It just started doing this out of the blue and all I want is to put some new music on my iPod!
    Things I have already tried numerous times...
    -uninstalling ALL things apple related on the computer and reinstalling.
    -resetting ipod
    -restarting computer
    -using different USB cords
    -using different USB ports
    Please help! I really don't want to go back to the Apple store. Please and thanks! (Oh, and in case it matters, I have firmware 2.2, and the latest iTunes)

    Hello,
    A couple of items...
    It's possible that a cable can charge an iPod on a wall charger wonderfully, but not sync the iPod to the computer. One of mine are in that "half-broken" stage, so I just ended up leaving it in the system I use to connect my iPod to my television.
    Regarding the error you're receiving when connecting the iPod... is the iPod jailbroken? If not, try creating a new user account on your computer and connecting the iPod there.
    Creating a new user in Windows XP:
    1. Go to Control Panel > User Accounts
    2. Click on "Create new user"
    3. Follow the prompts to create a new computer administrator
    4. Restart the PC and log in to the new account
    I know you've already uninstalled and reinstalled Apple software, but this recommendation doesn't hurt. Open your Control Panel and go into Add or Remove Programs. Remove Apple Mobile Device Support and iTunes. Then, open up My Computer, go to your hard drive, and open up the folder called Program Files. If you see a folder called Apple Mobile Device Support, delete it. Then, restart your computer, download a new copy of the iTunes installer from http://www.apple.com/itunes/download/ and go through the installation.
    CG

  • Ipod won't work at all. Help Please!

    My 30 GB ipod is completely dead. it won't turn on, the computer won't recongnize it, and it won't work on a docking station. I've tried to reset it and it won't do anything. does anyone know what to do? any advice would be appreciated

    Keep trying to reset it (see instructions below) making sure you are using the hold button as part of the reset routine. Also try resetting it while cabled to the computer for power...
    Slide the hold switch from OFF to ON back to OFF then immediately hold down BOTH the center and Menu buttons for a good 15-30 seconds or until it restarts with the Apple logo.
    Resetting isn't always effective once and you may need to retry it several times to get it to work.
    Patrick

  • My iPod won't connect to my Mac... Help?

    My iPod won't connect with my Mac anymore.
    It connected last time I tried it (four months ago, about). It's a Gen Two or Three (I don't know the difference, sorry) and I haven't changed anything about my Mac since then, or my iTunes.
    If you can help at all, please reply. And don't hesitate to ask for more info.
    EDIT: Oh, and I've tried resetting the iPod, putting it in Disk Mode, using a different USB port and restarting the computer (several times).
    The iPod says "Do Not Disconnect" and the iPod symbol appears on Finder and I am able to access it, but it won't appear in iTunes.
    Message was edited by: Hortaux

    I was having the same problem--no iPod on Desktop, no iPod in iTunes. This fixed it for me, at least:
    1. Open Applications > Utilities > Disk Utility. (My iPod DID show up here, though it wasn't mounted.)
    2. Select the iPod in the disk list on the left.
    3. Click "Verify Disk." (In my case, this revealed an underlying error.)
    4. Click "Repair Disk." (If this works, great--stop here. It didn't work for me...)
    5. Click the "Erase" tab at the top of the right-hand main pane.
    6. Choose Mac OS Extended (Journaled) for Volume Format.
    7. Click "Erase" button at bottom right.
    Almost immediately, my iPod showed up on my Desktop, iTunes launched, and it was as though I had completed a Restore of the iPod.
    Hope that helps....
    David

  • IPod won't connect more than once

    When I plug my iPod into my computer, my iTunes registers and connects and syncs. Perfectly fine. But I want to change some settings on my iPod, such as the album artwork and playlists, and whenever I try to sync it again, my iPod won't connect and my iTunes can't find it, even though its plugged in.
    Help?

    Typically when only one device can connect to the AirPort base station, it may be because it is not properly configured as a NAT router ... which is its default configuration.
    One option is to perform a "factory default" reset on the AirPort, and then, try connecting one or more devices to verify that they now all get network/Internet access. Once verified, you can use the AirPort Utility to configure it per your networking requirements.

  • My ipod does not recognize touch all of a sudden. It is on, but I cannot use it because it won't recognize my touch! Help please!

    My ipod does not recognize touch all of a sudden. It is on, but I cannot use it because it won't recognize my touch! Help please!

    -You stated: " It is on, but I cannot use it "
    Does this mean that the iPod works fine but when you connect the iPod to your computer iTunes does not see - your iPod?
    - Have you tried:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    - If you really have OSX 10.6.x (not 10.5.8 as stated) try:
    Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
    - Have you tried another cable and USB port?
    - If the iPod is not working then there are other things to try.

  • I can't update my iPod Touch software. It fails at 777 mb of 778mb saying download has timed out. Computer settings and broadband connections are fine. Help please!

    I can't update my iPod Touch software. It fails at 777 mb of 778mb saying download has timed out. Computer settings and broadband connections are fine. Help please!

    Disable or turn off all firewall and anti-virus software and try the download again.
    Stedman

  • Ipod Won't Connect!

    hey
    ok so last night, i figured i'd put some more songs on my ipod... it kept having trouble connecting, but it eventually would... then i accidently pressed the "sync ipod" button, and it erased everything... then i felt a little bit better since i still have all the songs on my computer... but now my ipod won't connect to the computer... i plug it in with the usb cable, and on the ipod, it says Do Not Disconnect... but iTunes does not prompt when i plug it in... and it won't recognize my ipod... help please
    Amanda

    connect the Ipod and then restart the PC
    -reset the ipod
    -put the ipod in disk mode
    -then restore
    follow this article
    http://docs.info.apple.com/article.html?artnum=61711
    Thanks

  • 3rd gen ipod won't connect with firewire.

    3rd gen ipod won't connect to itunes with firewire. USB connects rarely but drains battery quickly. I've rebooted the ipod and computer and updated itunes. No effect. Any remedies besides buying a new ipod.

    Answer to Question 1: - I connected the iPod with the USB, went to Disk Utility and erased the iPod. Now the iPod works with USB.
    Question 2 is still unanswered. Ideas?

  • 10 gig iPod won't connect.....

    Greetings
    I've changed the original battery from the 1st gen 10 gig scroll wheel, but now the iPod won't connect.
    It has lost its charging indicator, but feels warm to the touch. I can still play all the music that is on there, but can't see it via iTunes or finder.
    I can see the ipod via the firewire, i.e. about this mac, more info, firewire, shows that the iPod is connected, but has it listed as version 0.0.
    I've tried this http://support.apple.com/kb/HT1363 but no joy.
    Any ideas from the brains trust?
    Cheers

    Make sure you have tried a different FireWire port, and shutdown (power off) and restart your computer if you have not done so since having this issue.
    You can try a different FireWire cable. If this is a 1st gen iPod, it uses a regular FireWire (400) cable.
    Since the iPod is seen (somewhat), does the iPod show up in Disk Utility? If so, use Disk Utility to reformat (erase) the iPod's hard drive in the Erase tab. Make sure the iPod's hard drive (not the volume indented under the sidebar) is selected in the sidebar. Select +Mac OS Extended (Journaled) as the format type. If that procedure succeeds, run iTunes again and if it is seen now, use the Restore button to install and initialize the iPod's software.
    It is possible that when you opened the iPod to replace the battery, you inadvertently disconnected the hard drive. Therefore, the iPod is "seen" by the system, but the hard drive is not. I have also read some reports that if the replacement battery is just a tad too thick, it puts pressure on the hard drive and causes the platter not to spin. So you may want to open it up again, check the hard drive connection, and try it with the back side off.

  • I´ve forgotten my passcode and my ipod won´t connect or appear in my PC

    I´ve forgotten my passcode and my ipod won´t connect or appear in my PC - any ideas?
    Thanks.

    Place the iPod in Recovery Mode and restore via iTunes.
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If iTunes still does not see the iPod see:
    iOS: Device not recognized in iTunes for Windows

  • IPod won't connect to wifi but the wifi is fine

    My computer's wifi is fine but both mine and my sisters iPods won't connect to the wifi. What's wrong with my iPod?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My ipod won't connect to pc at all

    My ipod won't connect to pc. I tried on a few computers but windows won't detect the ipod and the ipod does not recharge.
    Eventually my ipod ran out of battery and now i cant use it at all, not even as a memory stick because it can't connect to a pc...

    so i'd prob have to bring it to a store and have them look at it, correct? also one more thing, if i uninstall my itunes and reinstall it, will all my music still be there or will everything be gone?

  • 2nd generation ipod won't connect to the internet, and i've never had a problem with it before.

    My ipod won't connect to the wi-fi but our computer will.

    - Reset the iPod. Nothing wil be lost
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset neteworks settings: Settings>General>Rest>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • 40GB Ipod Won't Connect...?

    My 40GB iPod won't connect to the computer when i plug it in. The display comes up with "Do Not Disconnect", but iTunes won't open or anything. It just stays like that.
    I've tried connecting to another USB port, restarting the computer and iPod, but nothing seems to work.

    The only time I use a USB is for my nano because it's not supported by a firewire; otherwise, I'm not a big fan of USB's and use the firewire for my other pod. Have you tried a firewire?
    http://docs.info.apple.com/article.html?artnum=93405
    http://docs.info.apple.com/article.html?artnum=32491

Maybe you are looking for

  • How to define generics in interfaces

    I want to define an interface for Person, which has 2 attributes, 'Owner' and 'Access', but these attributes may be different types for different implementations of the interface. I have another interface that takes Person, so I have something like t

  • NOKIA ASHA 501 CAMERA SHUTTER SOUND CANNOT BE TURN...

    Camera shutter sound cannot be turned off on the scrolling menu. This bug needs to rectified fast. Its a nuisance

  • Data Set with multiple ref cursors

    Hi , I need to design an integrated report , i created my data set with a oracle procedure which returns "multiple ref cursors" . In this case birt is displaying all output columns together and it is difficult to identify which column belongs to whic

  • Is there any way to work around administrator passwords to reset?

    I have lost record of my administrator name and password for my iMac. Is there any way around it to reset it? There are multiple users and each time someone tries to log off, it requests administrator rights, forcing a hard shutdown.

  • One Item in Invoice

    Dear All, When i am creating delivery my batch is picking up fine and i can view the batch, when you extend it i.e it will appear in 2 lines ok. when i try to create Invoice it is showing 2 line items i.e Line item 10 same material with no value Line