Ipod won't interface....do not disconnect always on

unit is approx 6 months old and i can no longer install music from i tunes....do not disconnect is always on....I have ejected it and the warning goes away but when it reconnects it comes back..help...thanks

If you have your iPod set to transfer your music manually, then that “do not disconnect” message will continue to be displayed on your iPod until you manually eject it.
If you have your iPod set to automatically sync with iTunes, right click on the iPod in iTunes, select options and if you have a check mark in the box marked “enable disk use”, remove it and your iPod should automatically disconnect after it’s finished transferring music.

Similar Messages

Ipod won't sync - do not disconnect error

I tried to load some new songs onto my nano (just before I went on holiday) and they wouldn't appear so I naturally went through the 5Rs. Net result, not only will songs still not appear on the nano, I now have no songs at all on it!
Here's what currently happens. I connect the ipod to the laptop. itunes boots up and treats the ipod as "new" i.e.: asks to confirm the name etc. It then does the whole sync thing, taking ages, before confirming that sync has completed ok. Meanwhile the ipod is showing the "do not disconnect" screen. Here's where the trouble starts. The ipod remains on this screen - even though itunes says that the sync is complete. By clicking on the disconnect button from within itunes, itunes seems to lock for a long while until (eventually) the ipod is released and disappears from within itunes.
So, what I can determine is that the ipod and itunes can "talk" to each other but somewhere along the line they're getting their wires crossed. Seems to be some form of corruption, but despite reading these forums and the Apple "help" pages, I've not been able to resolve it.
Any ideas?

The answer was given to me by Kylene. It was due to a conflict in drive naming by Windows. See the attached:
http://docs.info.apple.com/article.html?artnum=93499#changedrive

My ipod is stuck on do not disconnect, and it won't respond when plugged in to imac or wall. Is there a way to restart it without using the computer?

My ipod is stuck on do not disconnect, and it won't respond when plugged in to imac or wall. Is there a way to restart it without using the computer?

You can reset your iPod with these instructions: http://support.apple.com/kb/HT1320

My Ipod is stuck in "do not disconnect

My Ipod is struck in "do not disconnect"?

You can reset your iPod with these instructions: http://support.apple.com/kb/HT1320

IPod nano 6th generation: "Do not disconnect" on white screen w/flashing icon; previously "Connected-Eject before Disconnecting" on dark screen w/USB icon; no content on iPod

Trouble began with "Reconnect to iTunes to Restore" message after I inadvertantly held down the Wake/Sleep button long enough to turn the iPod off before pausing the podcast in progress.
My subseqent actions to try to remedy:
-Restored the iPod
-while Restoring, the rotating circular arrows and "Synchronizing-Do Not Disconnect" screen appeared followed by "Connected-Eject Before Disconnecting"
-when I ejected the iPod and disconnected it, the normal icons showed but there was no content
-Reinstalled the latest iTunes 11.0.3 which I had downloaded previously a few days before my problems began
-Restored iPod again: still said "Connected-Eject before Disconnecting"
-Manually put the iPod into Disk Mode (said to be helpful in troubleshooting): "Do Not Disconnect" on white screen with flashing icon (circle with diagonal line)
-Ejected and disconnected the iPod.
-Reconnected the iPod: same message

You need to either the let the iPod finishing syncing with iTunes, or figure out what application is still using it in the back ground that prevents you from being able to properly eject the device. Just unplugging it from the computer is almost always going to cause issues when it's still in use by iTunes or another application.
So let's connect the device to iTunes one more time and let it finish restoring. Then try syncing a bit of content over to it and wait for it to finish the sync process. Then try to properly eject it from iTunes this time.
B-rock

Connecting iPod to computer & getting "Do Not Disconnect" (not recognized)

I plug my iPod (40 gig, click wheel) into my computer and the screen goes to "Do Not Disconnect" and I can hear the hard drive turning. The problem is that it never pops up in iTunes and have tried to restore and since it keeps churning away on "Do Not Disconnect" it isn't recognizing the iPod.
I've read the forums and FAQs and I've seen similar issues but has anyone had this specific problem?
The iPod is trying to connect but never gets there.
Any help would be greatly appreciated.

I plug my iPod (40 gig, click wheel) into my computer
and the screen goes to "Do Not Disconnect" and I can
hear the hard drive turning. The problem is that it
never pops up in iTunes and have tried to restore and
since it keeps churning away on "Do Not Disconnect"
it isn't recognizing the iPod.
I've read the forums and FAQs and I've seen similar
issues but has anyone had this specific problem?
The iPod is trying to connect but never gets there.
Any help would be greatly appreciated.
I have had this problem too and still do to this day - my computer won't recognize that the ipod is attached and basically just freezes up. Last time I loaded music from itunes, I found a very helpful post on this discussion board that told me how to change my USB speed from 2.0 to 1.1. After doing this, my computer recognized the ipod and I was able to load songs (of course it took forever but that is OK). However, I can no longer find the posting. Does anyone out there know how to do this?
Dell Windows 2000

IPod continues to say "Do Not Disconnect"

No matter how long I leave my iPod connected to my computer to synch and charge, there is always a "Do Not Disconnect" message displayed on the screen. This is so even though (a) the battery icon shows a full charge (if I read it correctly; it has been charging for the past 18 hours, at least); and (b) iTunes says the synch is complete. What am I supposed to do? Leave it there forever? Ignore the message and yank it out anyway? I saw a post somewhere recommending to "Deselect Enable Disc Use" in options but I have found no such option.

If you look at the pictures on both the linked pages (that planb77 mentioned) you will see the Summary tab +in the picture.+ Click on the iPod that is listed under Devices and the Summary screen is displayed.
BTW, although it was partly explained in the linked articles, you should always use the "eject" or "safely disconnect drive" buttons of any device that can be written to. In other words, memory keys, iPods, mp3 players etc. Using that button allows the computer to check that the device is not in use. If it is - and you simply pull the device out, any file that has not yet been fully saved will be corrupted.
Glad that both myself and planb77 were able to help.
Phil

DO NOT DISCONNECT always shows on menu!

It always says not to disconnect when plugged in to my computer. I do disconnect it after itunes says that the update is complete and the songs are always on there, but why is this? how can i fix this?

If you have your iPod set to transfer your music manually, then that do not disconnect message will continue to be displayed on your iPod until you manually eject it.
You can do this by clicking on the little eject icon next to the iPod listing in the source window of iTunes, or right click on it and select eject. Another way would be to use the safely remove hardware icon in the system tray next to the clock (looks like a grey rectangle with a green arrow above it). Click on this then select your iPod. Or through Windows, select start/my computer, right click on the iPod, select eject. With Mac, drag the iPod into the trash.
If you have your iPod set to automatically sync with iTunes, right click on the iPod in iTunes, select options and if you have a check mark in the box marked enable disk use, remove it and your iPod should automatically disconnect after its finished transferring music.

Ipod never changes from Do not disconnect when attached to Laptop

I have been having issues with my ipod nano. I have gone through all of R steps, I have reset my ipod, updated my ipod, re-installed i-tunes and the ipod software, checked to make sure my PC is updated.. everything. I am about at wits end.
No matter what I do, when my ipod is attached to my computer I am unable to get Do not disconnect to go away, and i-tunes never recognizes my ipod. I am able to see it from windows explorer.
Please help. Let me know if you need any additional information for clairification. I miss my ipod!

Welcome to Apple Discussions!
If iTunes doesn't see it then it won't be ejected.
See these...
iPod shows up in Windows but not in iTunes
http://docs.info.apple.com/article.html?artnum=301343
btabz

Ipod mini stuck in "do not disconnect mode"

I had my ipod mini plugged in and downloading music onto it...it was working fine, when I was done I ejected it off the computer so I could disconnect it...it ejected off my desktop but then the screen that says "do not disconnect" would not go off my ipod screen then my computer froze so I restarted it and unplugged the ipod, now the ipod is frozen on that screen, I tried restarting it and that didn't work, I tried plugging it back into the computer and it won't show up on my computer or my sisters computer and the screen won't change....any suggestions??

If you are sure resetting it doesn't help (and it might take many attempts), then look here.
iPod doesn't appear in iTunes or on the Mac desktop.

Ipod is frozen on do not disconnect screen....

i seriously don't know what to do with m ipod anymore. it's a 5 gen ipod video that i've had for less than a year. today i tried to sync it to my computer which is a sony vaio with windows xp and it got stuck on the do not disconnect screen. i plugged the ipod in and waited for itunes to open, which it didn't(i waited a long long time). so i then shut down my pc thinking the do not disconnect screen would go away after the pc was shut down...but it didn't. i tried rebooting my ipod MANY times and that didn't work. I tried plugging it in different usb ports on my pc and it doesn't show up in itunes. it shows up in my computer as a 'removeable disk' not an ipod as well. i don't know what to do...all i wanna do is format it back to factory settings so i can use it on my new pc(a brand new imac..<3) does anyone have any ideas? thanks.<br>
Imac Mac OS X (10.4.9)

Even when its not connected..I went through the same thing my Ipod freezes alot(5thgen) nor will it show vidoe or pics not even podcast. What I did was got a programm call TUNE TRANSFER FOR ipod. With this you can backup anything on your ipod so you can then restore it. During a freeze your computer doesnt recognize the ipod at all.No connection. You need to reset your Ipod but not traditionall. 1- toggle hold switch 10 times each direction.(left/right)immediatly after your last toggle(be sure the toggle isnt on hold)
2-hold menu and select buttons for 15 seconds toggle periodically. I hopes that helped if not messege me back. make sure you have the latest Itunes.
GOOD LUCK

My iPod classic is saying "do not disconnect" but neither my MacBook Pro or iTunes is recognizing that it is plugged in. What can I do?

About 2 weeks ago my iPod told me that something (I forget what now) was corrupt and my iPod had to be restored to factory settings, so I did that. Before I had a chance to resync my iPod, my harddrive in my MacBook Pro crashed and had to be replaced. Now when I try connecting my iPod classic, my iPod says "do not disconnect" but neither my laptop or iTunes is recognizing that my iPod is plugged in. I have tried using another cord, restarting my iPod, restarting my laptop, iTunes is up to date...what else is there that I can do to get my iPod to connect to my laptop?
Thanks in advance!

Try a system reset, hold down the off button until it turns of and then back on again, this might not work though if it is properly stuck. If all else fails go to Apple

IPod connected & now constant Do not disconnect on Display

I recently connected my iPod with Color Display to my Mac, iTunes did not immediately boot up nor did the iPod icon appear on the desktop. I manually started iTunes and ITunes began its synching routine and the "Do not Disconnect" message appeared on the iPod Display. When iTunes said the Sync was complete, the Do not disconnect message never reverted to the Main Menu. I ejected the iPod and the Do Not Disconnect message is still on the Display. I can not turn my iPod off, Disconnecting and reconnecting my iPod to the computer does not change the display status. I would just like to get it back to normal working status.
Can anyone offer recommendations as to what I can do?

iPod ran ow on battery power. iPod automatically shut down. When plugged in, iTunes performed a Synchronization and iPod started to re-vharge its battery

3G iPod seems locked in "Do not disconnect"

All my ipod does is display the "Do not disconnect" message. I cannot restore, reload, or reset it. I can't even shut it off! My MacBook Pro does not recognize it when I plug into Firewire.

Is your iMac one of the new Intel iMacs? I think Mac users with the new Intel Macs are having trouble with the older iPods like the Third Generation iPod. I'm using mine with PowerPC Macs & it works fine. The only issue is that I can't get it to charge to 100 percent. I had to replace the Hold Switch, the Lithium Ion rechargeable battery & I had to upgrade to a 20 GB hard drive since the original 10 GB hard drive died. I had to put the iPod into Disk Mode before my '17 iMac G5 would even recognize it all after replacing the hard drive. I'm thinking the logic board may need to be replaced too since I read that in the Knowledge Base Articles that iPods may need to be repaired. Apple charges $299 if your iPod is out of warranty. I found a online store via Google that sells parts for older iPods at reasonable prices. I think once I get more money I'll try to replace the iPod's logic board next.

IPod nano stuck in "Do not disconnect"

My wife's new nano was working perfectly in all operations.
Now, when we plug it into the computers (more details to follow), 1) the computers don't recognize the iPd, and 2) the iPod says "Do not disconnect" (i.e., the iPod /does/ know it's plugged in to a computer.
DETAILS:
* we've tried this on both USB ports on each of two PowerBook G4s, each running OS X 10.4.3. The iPod software is up to date on both computers.
* when I reset the iPod (following the instructions in the KB), it works fine when /not/ connected to the Macs
* the iPod /does/ accept charge from the computers when connected
* I have /not/ tried FireWire, nor have I tried replacing the USB cable. (Mostly because it seems to work OK - iPod recognizes it's connected, and accepts charge)
Anyone?

I think this may be connected to the ongoing problem that the nano is not officially supported by OS X 10.2.8. I have that configuration, and while I seem to be able to download to the nano and play everything OK, it does get stuck in "Do not disconnect." I just get brave and eject the iPod while it's still showing that message, and everything seems fine.
I haven't seen the option for downloading photos, so maybe that does require 10.3.
I'm running a 4 1/2 year old iBook which does have USB 2.0, and the download speed seems fine.
iPod nano 4GB Mac OS X (10.2.x)

Ipod won't interface....do not disconnect always on

Similar Messages

Maybe you are looking for