Ipod won't play any files!

I am using a fully updated ipod and itunes.This morning my son accidently disconnected my ipod while it was flashing do not disconnect.I was using Anapod explorer 8.9.6.
Now none of my files will play at all. When I cue them up the ipod just cycles through all of them.In itunes my ipod is no longer called the name I gave it it is now named my ipod.
But wait it gets better, there is a playlist called the name I first gave my ipod with all my songs in it only they also won't play.
The files are still there when I open anapod but it won't let me move them or play them either. I don't want to restore my ipod cause I don't have a backup yet !
Please somone help me!
  Windows XP  

Aren't the songs on your computer?
As long as the songs are on your computer, you can
restore your iPod. Or, are the songs not on your
computer?
btabz
No the songs are not on my computer.I only have a 40gb hard drive and my ipod is 60 GB. I have a new hard drive in the mail but I don't have a good backup as of yet.

Similar Messages

  • My ipod won't play any music

    My ipod won't play music. I tried playing music with and without headphones and when my ipod is in the dock, but it said music was playing except there was no sound. Can anyone help?

    Do the headphones work in another device?
    Does the iPod play any sound?
    Try the following to rule out a software problem:
    - Reset . Nothing is lost.
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • Ipod won't play any songs

    Ok, had this problem for a couple of week's now and am at my wit's end on it. My 5th Generation video Ipod will not play anything. With both songs and videos, I select one and it shows the play icon but just sits there with the time at 0:00 almost as if it were paused. I can fast forward through the song but wherever I tell it to play it just sits there. No sound or anything.
    The weird thing is that I can play the songs off of my Ipod in Itunes or hooking it up via USB to another device like my xbox 360 just fine. It's just the Ipod itself that won't play anything.
    I am using the latest version of Itunes and have tried both resetting and completely restoring my Ipod several times, all with the same result.
    Has anyone else run into this or have another solution that might help me?
    Thanks.
    PC   Windows XP  

    I had my ipod little over 2 years and now it will only charge!!!
    the songs dont play at all on my ipod and it makes a weird sound when it wants to play then after a while of skipping songs it wont play and just freezes..
    When i come to restoring the setings on the computor it just says that it is being used by another application and wont allow me to restore..
    any suggestions?
    would be much appreciated x

  • IPod won't play mp3 files

    Recently had to reset my iPod & reload iTunes incl my whole library. Now all of the mpeg song files won't play on my 80g iPod. They will xfer but won't play. B4 the reset all of my files played. I would convert them to AAC but i have over 11k songs-- i shouldn't have to as the player supports these files. It has played them all before.
    The imports setting on iTunes is already set to convert to AAC but it never physically does it. It has never mattered before.
    What settings, resets, changes can I make.

    wHICH VERSION OF ItUNES ARE YOU RUNNING
    yOU MAY NEED TO JUST DOWNLOAD THE NEWEST ItUNES 7
    Macbook Pro   Mac OS X (10.4.1)  

  • IPod won't play any songs...stuck on 0.00

    Just recently (maybe after the latest iTunes "upgrade") my iPod now will not play any tracks. I have completely re-set it and redownloaded all my music to the iPod. All the functions of the iPod work fine (scroll wheel, folders, etc). But no matter what song is chosen, it's just frozen on 0.00 and doesn't play. It does play fine when connected to iTunes.
    Somebody out there, please help!!!

    I have an 80GB 5th Gen iPod with the same symptoms.
    I had a talk with an Apple rep and they said this is not normal behavior (obviously) and they offered to have it repaired/replaced. We did some troubleshooting over the phone and narrowed it down to the hard disk. For me it seems like this happens when the iPod comes out of deep sleep. I press play and it shows Now Playing but does not forward the play head nor does the time elapsed change. And I don't hear anything either. Only way for it to play is to put it back to sleep (hold play) and then turn it on again. You can feel/hear the hard disk inside spin up. Then the iPod will play.
    However this problem only happens intermittently. I was not able to reproduce the problem over the phone but the Rep said they would have a look at it anyway. So if you're debating whether to call tech support... don't. Give them a call. Good Luck.

  • 20G iPod Won't Play AIFF files

    It simply scrolls past them. Any reason for this? The same thing happens with Apple Lossless.

    Why don't you try converting the AIFF files to Apple Lossless? I think you may have to burn the AIFFs to CD Audio, then import them, but I assume this would reduce the size of the file to a similar size to a compressed AIFF, and you won't lose the sound quality.

  • My ipod 4th generation won't play any videos on any browser and YouTube

    My ipod won't play any videos on safari and every other browser I downloaded. It won't even play videos from YouTube and YouTube the ap.

    Many videos via Safari require Flash and will not play on the iPod.
    What exactlyhappens when you try to use the YouTube app on the iPod?
    Try
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    Deleting the and reinstall the YouTube app
    - Go to Settings>Safri and Clear Cookies, Data and History
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
      - Restore to factory settings/new iOS device.

  • Ipod Nano won't play any songs downloaded from MySpace pages...

    My first generation Nano was initially sent back to Apple due to the battery losing it's charge to quickly. They sent me back what appears to be a replacement Nano and now this one won't play any songs downloaded from MySpace pages of bands, shared from friends (unprotected mp3 files) or otherwise downloaded from the internet.
    Whats unusual is that any songs imported from a CD to the Nano play fine as do any songs purchased from iTunes. I know Apple has stated that any files the user wishes to play on their iPods will play as long as the format is compatible. (All of these songs in question played on the original Nano and the problems started when they said they fixed it and sent it back (although it is missing the engraving which to me indicates they gave me a refurbished Nano). My Applecare runs out in mid-October so I need to figure out what is wrong. I sent it back a second time and they told me they couldn't recreate the problem so they just updated the software and sent it back.
    Someone suggested that some iPods have a part of the firmware activated (which Apple may have been testing) that prevents any non-ITunes store music or music no t off an original CD to fail to play.
    When attempting to play downloaded songs from sites like Purevolume and MySpace the iPod plays for a few seconds then shuts down and restarts itself, all of these songs worked fine before Apple took it in for service.
    Any suggestions?

    Hello,
    I have exactly the same problem. It`s so annoying.
    I did a little bit research on this discussion board and this problem seems to be known for quite a long time. It`s confusing me Apple is not able to fix that prob or give customers quick introduction to resolve the prob.
    I am currently on vacation in Florida and just bought the new iPod 30 Gig. I transfered already songs from my music cd. That worked fine.
    I bought 2 music video files, synced them with no error to the iPod, but it only shows me a black screen when I want to start the video on the iPod itself. itunes plays the files with no problem.
    Any ideas how to fix it??
    DELL Latitude D800   Windows XP Pro  

  • QT won't play .mov files any more

    After a complete system re-install, QT player won't play .mov files any more. It tells me, some components were missing. Hey, this is its own file format!
    MPG files run OK.
    Thanks a lot for a good idea!
    Peter

    What format are the videos that don't play.
    WMV...Windowa Mwdi Videos you'll need the flip4mac component. Free trail:
    http://www.telestream.net/flip4mac-wmv/overview.htm
    Other codecs, Perian and it's free:
    http://perian.org/
    Flash videos like the one on youTube. Adobe Flash comonent and it's free.
    http://get.adobe.com/flashplayer/?promoid=DXLUJ
    You should download all three and install. Remember to rebuild your Permission after install any or all of the above.

  • Does ipod classic can play any video file asside to mp4?how?

    does ipod classic can play any video file asside to mp4?how?

    The following is what Apples iPod Classic Specs page lists. You can convert videos to compatible formats by using a free app called HandBrake.
    H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats

  • IPod Won't Play Songs, Videos Reset it, and it's Quite Sluggish

    I have a 30GB video iPod (the old version). Everything was working fine until a few days ago, when the power on my iPod ran out because I fell asleep while listening to it. The next day when I turned it on, it said "Connect to your Computer, Use iTunes to restore" So I promptly did that, and it worked fine until I tried to play a video on it. It showed a blank screen, so I reset it by pressing the Menu and Center buttons. Then it showed the "Connect to your computer" screen again. So I restored it, and it would be fine until it locked up again and showed the "Connect to your computer screen" again. I left it alone for about eight hours, and when I tried turning it back on again, it was back to normal.I've seen that screen probably 10 times in the past 4 days, and I've restored it, just as many times.
    Here's the list of problems I'm having:
    - the iPod won't play some songs when I click on them. It will show the Playing triangle in the upper left corner, but I hear no sound and the seeking bar doesn't move. I'll often have to click the Pause button, then hit it again to Play it, and then it will play the song.
    - The iPod is extremely slow. When dealing with songs or videos, it often takes a minute or more for the iPod to respond to my button clicks. Its hard drive isn't full, though; in fact I'm only using about 2 GB.
    - Videos lock up the iPod. Just about any time I want to play I video on it, it will show a blank screen and won't respond. Then I have to reset it and I get the "Connect to your computer" screen again. These aren't videos in the wrong format or anything, these are the same videos I've been playing on my iPod before with no problems, until recently.
    - Battery life is horrible. Although it hasn't been fully drained yet, judging from the power meter and how long I've been using it after it's fully charged, I'd guess it would only last about 2-3 hours. I would think it should last considerably longer, as the iPod is only about 3 months old.
    Has anybody been experiencing similar problems, or know what I can do to fix it?

    I've still had the same problems, but now when I try and turn on my ipod, it tells me to restore. When I do go to restore, itunes says that it cannot find the file needed to restore my ipod. The ipod itself also tried resetting itself, I guess, made it to the menu that asked what language I wanted it in, and then restarted again. This went on for an hour and a half, and I could't do anything. Is my ipod a lost cause?

  • My ipod won't sync any of the music i downloaded and says that iTunes can't backup the Ipod because a session couldn't be started with the Ipod how do i fix this

    My ipod won't sync any thing in my iTunes library it always stop as soon as it starts backingup the Ipod a message appears that says iTunes cannot backup the Ipod "my Ipod" because a session couldn't be started withthe Ipod how do i fix this problem?
    This is exactly what the message says: iTunes could not back up the iPod "austins ipod" because a session could not be started with the iPod.

    Try connecting your ipod to another computer and sync only 1 file or song just for isolation purpose only to see if it'll sync.
    If still not syncing, then porbably you may have a bad iOS installed in iPod which is hard to see if it has a problem because you said nothing's wrong with iPod. I just saying is, it MIGHT have a bad iOS.
    If you are unable to do a restore, put your ipod in DFU mode, then connect to iTunes and iTunes will detect your ipod in restore mode. Press shift key (PC keyboard) then click the restore button on iTunes. I hope you have your copy of IPSW file for restoration purposes.

  • I upgraded to the latest iTunes 10.2.2.12 and now it won't play any music. I can do everything else, except play music. I'm on Windows 7. Any ideas?

    I upgraded to the latest iTunes 10.2.2.12 and now it won't play any music. I can do everything else, except play music. I'm on Windows 7. Any ideas?

    i had this problem and finally figured it out. all that you need to do is go to your start menu and click on computer. select your main drive, (local drive) c usually. Next open the users file follow by your user name file, which is just like it sound it is a file labled as whatever your name is as you have it on your computer. Then you open up the AppData file. Next open the Roaming file. After that open the Apple Computer file followed by the iTunes file. Now you should see the folder labled iTunes Plug-ins folder. Now just Delete that folder. After that go to your iTunes and play your music.
    If for some reason you don't see the AppData file you need to go to the upper left of your screen on select organize. a drop down menu will appear and you need to select folder and searc options. a small folder options window will appear. in this window you need to select the view tab. you need to select the show hidden files, folders, and drives bubble. now hit apply and then ok. that will allow the AppData folder to be seen.

  • Repaired screen and now iPod won't play

    I replaced the broken LCD screen in my son's 1st gen black nano. It looks beautiful! There is a problem with the ipod now though. The iPod won't play. Everything works perfectly...screen is bright and beautiful, click wheel works to move through all menus, change volume, etc. You can choose a song, but the song won't play. The little triangle that stands for play is in the top left corner like it wants to play, but the status bar that tells you how long the song is doesn't move at all. You can fast forward through the song manually, but it won't play.
    I have reset the ipod by toggling the hold button and pressing the select and menu choices from the click wheel. I have done the 5 R's that Apple suggests. I have even restored it to original facotry settings. iTunes can see it and re-downloaded all of the music onto it. All of the software on the computer is updated and the ipod software has been updated. Everything works fine except it won't play!
    When I had the iPod open and was working on it, there were 2 ribbon cables that needed to be connected, 1 was the click wheel cable and 1 was the LCD screen cable. I have attached those securely and both are working properly except for the matter that it won't play songs. There was 1 other flat copper cable that seems to be glued to the click wheel that I didn't see in any of the pictures in the repair manual. It's not a ribbon cable. One end is still glued to the click wheel, but the other end is loose. This is probably the problem. I don't remember disconnecting this during the repair, although I know it had to be connected somewhere. I reaches up close to where the earphone jack is. Does anyone have any idea where this flat copper cable is supposed to be connected? I would appreciate any help you can give me! Thanks!
    iPod 1st gen black nano   Windows XP  

    Here is the URL for the picture of the copper cable. The dark part at the end of the copper cable is a piece of silver metal mesh that is glued on one side of the copper cable. You can see that it is glued at the other end to the back of the click wheel underneath where the battery was glued down. I vaguely remember that it was connected to something else, but I don't remember disconnecting it because I was so intent on getting the ribbon cables disconnected without damaging them.
    http://i124.photobucket.com/albums/p28/valdezs321/DSC04511.jpg
    1st gen ipod nano   Windows XP  

  • Photoshop CC 2014 won't open any files, not even create new ones

    I have a freshly installed version of Photoshop CC 2014 and it just won't open any single file no matter what I do.  I also have Illustrator CC 2014 installed for the past week, and it is behaving fine, and even opening up the files that Photoshop won't open (jpg, psd, png, etc.).
    I've tried uninstalling completely, and reinstalling it, and it still won't open any files.  Basically, nothing happens after I click the "Open" button from the Open File dialog window.
    I've also try resetting my user preferences using this video tutorial, and it also didn't resolve the problem: http://helpx.adobe.com/photoshop/kb/preference-file-names-locations-photoshop.html
    Has anyone else experienced this or can give information on how to resolve it?
    Thanks!

    Well, I finally got it to work through trial and error.  Here were the steps that I used to get it to work:
    1) Make sure that you are not behind any firewall/VPN/etc, just a direct connection to the internet (if possible).  I use Adobe for my work laptop, and I was informed that this could potentially be an issue during installation processes.
    2) Uninstall Photoshop via the Creative Cloud application interface.
    3) Right-click on the Creative Cloud icon from the system tray and "Quit" (it was automatically started for me from a previous bootup)
    4) Right-click on the Creative Cloud desktop icon and choose "Run As Administrator"
    5) Re-install Photoshop
    After performing the above steps, I can now open any png/jpg/gif/etc file, as well as start a new file.  I have no clue why it works or if my steps played any role in fixing it, but I thought it was worth sharing for others to try if they encounter a similar issue.  It could be either the firewall I was behind, or the permissions (I don't think Creative Cloud boots up running as administrator).  But I am in no position to say I know the exact resolution.  Hope this helps!

Maybe you are looking for

  • Using Quota templates with Self Service Site Creation

    I am having an issue with quota templates not getting assigned to site collections created with Self Service Site Creation. I set up a quota template in 'Specify Quota Templates' and give it the name 'test'.  I then go to self service site creation m

  • Can Oracle Forms access SAP R/3's Oracle 9i Database?

    I have an SAP R/3 with an Oracle 9i R2 database. I would like to access the contents of say KNA1 in Oracle 9i. Has any one try to integrate SAP R/3 using an Oracle Forms, say formaple, to maintain or just search/enquiry customer details in the table

  • Create Columns in Template using Smartforms

    Hi Guyz, Im using Template in smartforms and create 2 or more columns..but the columns must be in horizontal order like this : COMPANY   DEPT   BASIC but the column appeared vertical like this : COMPANY DEPT BASIC Another question is what is the purp

  • Is it possible to load Siri on a 3GS?

    Is it possible to load Siri on a 3GS?  Since the answer is a NO does anyone know of an app in the store for Siri-like voice control for the 3GS?

  • SQLLDR - Unable to use field defined as FILLER

    Why doesn't SUBSTR(VJOB_NO, 1, 1) work? What am I doing wrong? Portion of control file: FIELDS TERMINATED BY "|" OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS cycle_no CONSTANT '0002', VJOB_NO FILLER CHAR, spaces FILLER, RETRIEVAL_STATUS EXPRESSION "C