Ipod won't play through headphones anymore... and I JUST bought it!

I just bought my 5th Gen. ipod nano a week ago and was working fine. After I had used it on my ihome docking station, it won't play through my headphones anymore.... I use the ear buds that came with it- all the player does is imediatly play through the speaker- is there a setting or something where I can hear through the ear buds? I know I have the earbuds pushed into the jack all the way, I can actually hear some music in the earbuds (just not very loud). What can I do?

I know I have the earbuds pushed into the jack all the way, I can actually hear some music in the earbuds (just not very loud). What can I do?
Sorry, allow me to ask you a question, have you tried to increase the volume of the iPod, if Yes, then bring it for service ... it is a hardware issue

Similar Messages

  • Movie won't play on my iPad that I just bought off iTunes

    I downloaded a movie from iTunes to my iPad and it shows up but won't play it has a little cloud with an arrow when I click it it says I can't download it again for 90 days with this same ID? When I push the play button it starts to load to play then it stops and returns to the previous screen help please,,,,

    Try closing the Videos app completely and see if it works when you re-open the app : from the home screen (i.e. not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't fix it then try is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Ipod touch wont play through speakers anymore

    My Ipod touch played and charged fine on my Philips docking station until this week - now they won'tdo either but other ipods work  fine so it's not the speakers. Any ideas?

    - Make sure the iPod is fully seated in the dock. If you have a 4G those are harder to seat.
    - Look at the dock connector for abnormalities. Compare with the working iPods.
    - Yu can try the folwing to rule out a software problem:
    - Reset. Nothing is lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • I have a problem with my headphone jack and i just bought my macbook pro 10 days ago., I have a problem with my headphone jack and i just bought my macbook pro 10 days ago.

    I am having a problem with the jack in for the headphones. I have bought it brand new from a local authorised apple store about 10 days ago. As soon as I plugged in my headphones and tried them, the sound was coming out of one side of the headphone and the plug inside my macbook pro was loose. When i tried moving it the sound was coming out of the device. What can I do?

    Take it back to the store you bought it from. It will definitely be taken care of

  • My iphone 5 does not charge anymore, and i just bought a new charger. Help anyone? Thank you

    Hello everyone,
    My iphone 5 is not charging any longer, well there must be a bad contact or something, because it works about 50% of the time.
    Thinking it was my old charger, I bought a new one, and I still have the same problem, plus sometimes it says it's not an official product so it doesn't charge.
    I've had the iphone for one year exactly, and I'd rather not buy another charger if it's going to be useless...
    Thank you for any help you may be able to provide.

    Check the socket in base of iPhone for fluff and or any debris a common cause of apparent charger failure

  • Repaired screen and now iPod won't play

    I replaced the broken LCD screen in my son's 1st gen black nano. It looks beautiful! There is a problem with the ipod now though. The iPod won't play. Everything works perfectly...screen is bright and beautiful, click wheel works to move through all menus, change volume, etc. You can choose a song, but the song won't play. The little triangle that stands for play is in the top left corner like it wants to play, but the status bar that tells you how long the song is doesn't move at all. You can fast forward through the song manually, but it won't play.
    I have reset the ipod by toggling the hold button and pressing the select and menu choices from the click wheel. I have done the 5 R's that Apple suggests. I have even restored it to original facotry settings. iTunes can see it and re-downloaded all of the music onto it. All of the software on the computer is updated and the ipod software has been updated. Everything works fine except it won't play!
    When I had the iPod open and was working on it, there were 2 ribbon cables that needed to be connected, 1 was the click wheel cable and 1 was the LCD screen cable. I have attached those securely and both are working properly except for the matter that it won't play songs. There was 1 other flat copper cable that seems to be glued to the click wheel that I didn't see in any of the pictures in the repair manual. It's not a ribbon cable. One end is still glued to the click wheel, but the other end is loose. This is probably the problem. I don't remember disconnecting this during the repair, although I know it had to be connected somewhere. I reaches up close to where the earphone jack is. Does anyone have any idea where this flat copper cable is supposed to be connected? I would appreciate any help you can give me! Thanks!
    iPod 1st gen black nano   Windows XP  

    Here is the URL for the picture of the copper cable. The dark part at the end of the copper cable is a piece of silver metal mesh that is glued on one side of the copper cable. You can see that it is glued at the other end to the back of the click wheel underneath where the battery was glued down. I vaguely remember that it was connected to something else, but I don't remember disconnecting it because I was so intent on getting the ribbon cables disconnected without damaging them.
    http://i124.photobucket.com/albums/p28/valdezs321/DSC04511.jpg
    1st gen ipod nano   Windows XP  

  • IPod Won't Play Songs, Videos Reset it, and it's Quite Sluggish

    I have a 30GB video iPod (the old version). Everything was working fine until a few days ago, when the power on my iPod ran out because I fell asleep while listening to it. The next day when I turned it on, it said "Connect to your Computer, Use iTunes to restore" So I promptly did that, and it worked fine until I tried to play a video on it. It showed a blank screen, so I reset it by pressing the Menu and Center buttons. Then it showed the "Connect to your computer" screen again. So I restored it, and it would be fine until it locked up again and showed the "Connect to your computer screen" again. I left it alone for about eight hours, and when I tried turning it back on again, it was back to normal.I've seen that screen probably 10 times in the past 4 days, and I've restored it, just as many times.
    Here's the list of problems I'm having:
    - the iPod won't play some songs when I click on them. It will show the Playing triangle in the upper left corner, but I hear no sound and the seeking bar doesn't move. I'll often have to click the Pause button, then hit it again to Play it, and then it will play the song.
    - The iPod is extremely slow. When dealing with songs or videos, it often takes a minute or more for the iPod to respond to my button clicks. Its hard drive isn't full, though; in fact I'm only using about 2 GB.
    - Videos lock up the iPod. Just about any time I want to play I video on it, it will show a blank screen and won't respond. Then I have to reset it and I get the "Connect to your computer" screen again. These aren't videos in the wrong format or anything, these are the same videos I've been playing on my iPod before with no problems, until recently.
    - Battery life is horrible. Although it hasn't been fully drained yet, judging from the power meter and how long I've been using it after it's fully charged, I'd guess it would only last about 2-3 hours. I would think it should last considerably longer, as the iPod is only about 3 months old.
    Has anybody been experiencing similar problems, or know what I can do to fix it?

    I've still had the same problems, but now when I try and turn on my ipod, it tells me to restore. When I do go to restore, itunes says that it cannot find the file needed to restore my ipod. The ipod itself also tried resetting itself, I guess, made it to the menu that asked what language I wanted it in, and then restarted again. This went on for an hour and a half, and I could't do anything. Is my ipod a lost cause?

  • Can software be downgraded?  New version won't allow iPod to be played through my speakers.

    I'm not sure what version iOS my 4th Gen iPod Touch came with, but since upgrading to 4.3.1 it won't play through my Logitech Pure-Fi speakers.  Upgrading to 4.3.3 doesn't offer any features I need, so I'd liek to hear from someone who could step me through reverting back to an earlier version of software.
    Is this even possible?
    Thanks ;-)

    There is no legitimate way to downgrade an iOS.  Sorry.

  • HT1665 I have recently purchased a sony docking station and my ipod touch wont play through speakers.  does anyone know why

    I cant get my ipod touch to play through a docking station I have recently purchased.  A second ipod touch works fine.  Can anyone tell me why it wont play through speakers?
    thanks

    What model iPod and iOS works and which does not?
    Sometimes a 4G iPod will not fully sead in the dock because its case configuration is different that previous models.
    Also, sometimes an iOS update breaks compatibility.
    Have you checked the dock manufactuer's support stie for compatibility?
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • IPod won't play purchased music from iTunes Store

    My iPod won't play purchased songs from the iTunes Store. They play on my computer, using iTunes, through the iPod, but my iPod won't play the songs with headphones, or in my BOSE speaker station, nor in my car using my Belker radio adapter. I've purchased a few songs before, and haven't had this problem. I wasn't prompted, as I have been before, to enter in a password before playing the songs.

    i have the same problem, and i looks like there are another 4 or 5 discussion threads with the same prob. my ipod is about 14months old, got one of the first 4th generations when they came out -- have never had a problem, then when i downloaded itunes 6, all of a sudden everything i have purchased since then plays fine on my computer and just keeps scrolling thru and not playing on my ipod. very very frustrating. i have tried everything, right down to a complete restore on it, and nothing helps. also, when i downloaded itunes6, my purchased music playlist disapeared -- i spent 2 weeks and 5 emails going back and forth with tech support because they wouldn't address the issue, and am wary of going to them with this one. i thought the drive or memory on the ipod was corrupted and was going to buy another one, but now i'm not so sure -- is anyone having this issue with a 5th generation? because what it looks like is itunes 6 downloads may not be compatible with 4th G, and that makes me a little cranky. any one find a solution for this yet?
    hp pavilion   Windows XP  

  • Album I downloaded is corrupted won't play through, how do I re-download it from iTunes.

    Downloaded a recording and it won't play through for completly transfer to my iPod. I bought a totally different album and there are no issues. Conclusion the first album is corrupted. How do I download a clean copy from iTunes?

    Hi Arthur,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    Deleting items from iTunes
    http://support.apple.com/kb/PH996
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    Cheers,
    - Judy

  • The New Mail sound won't play through SoundSticks

    After many many years of using Eudora as my E-mail client, I have finally switched to Apple's Mail. So far, so good, EXCEPT for an inability to have Mail's "New Mail" sound play through my SoundStick USB speakers.
    I should mention that I use a "dummy plug" plugged into the front headphone jack of my G5 so that I don't have to listen to the startup bong when I turn the computer on. This has never been a problem because I use SoundSticks for my audio and, since the G5 can't "see" the SoundSticks when you first turn the G5 on, no bong through the SoundSticks either. Once the computer is up and running, all audio comes out of the SoundSticks. This is true of all of the alert sounds my Mac makes too. Even the "Send Mail" sound (swooshing plane) plays through the SoundSticks as it should.
    But the sound I have selected for "New Mail" (no matter which sound I select) just won't play through the SoundSticks. If I unplug the dummy plug from the headphone jack I can then hear the "New Mail" sound through the internal speaker. But I don't want to hear it that way (and I don't want to permanently remove the dummy plug either).
    Why is it that Mail's "New Mail" sound is the ONLY bit of Audio that I've found that WON'T play through my SoundSticks?
    Help!
    Mark
    P.S. A friend of mine is having the exact same problem with a G4 connected to SoundSticks. He says "HELP" too!

    Anyone?

  • My ipod won't play any music

    My ipod won't play music. I tried playing music with and without headphones and when my ipod is in the dock, but it said music was playing except there was no sound. Can anyone help?

    Do the headphones work in another device?
    Does the iPod play any sound?
    Try the following to rule out a software problem:
    - Reset . Nothing is lost.
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • Music sounds static when played through headphones or speakers

    i have had my ipod for a while now and it worked fine. However whenever i play through headphones or speakers the music goes to what sounds like static, i would like to know how to fix this problem and if i cant how much will it cost to have apple fix it for me.

    Update - I've isolated this (I think) to be something that happens when Microsoft Outlook for Mac 2011 is open. Exiting the app stops the noise.
    But still con't find out why it happens or any setting to stop it.
    cheers

  • I can't get my new iPad to play through headphones or earbuds.

    I can't get my new iPad to play through headphones or earbuds.

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

Maybe you are looking for

  • Insert Multiple Records into Multiple ZTABLEs inside the BAPI

    Hi, I have a requirement to Insert or Update Multiple Records into a ZTABLE inside the BAPI. Is there any special approach inside the BAPI to insert or update ZTABLEs with multiple records. It looks like the simple INSERT Statement is not working. Ca

  • Missing Database Index Production Server

    Hi,          We are getting Missing Database Index ZPP_EXCAVAT_DET5~0 in production server. For missing database index we are getting in se14 it is showing  Exists in the database.While we are using t -code in Db02 there we are getting ZPP_EXCAVAT_DE

  • Display cost center field under item level when creating sales order

    Hi dear experts,    during  the sales order creation(tcode VA01),  is it possible to display the cost center field in the tab account assignment under item level?? currently we are using ECC6,in the tab account assignment, the cost center field was a

  • How do I mark someone as important while using "do not disturb"?

    How do I specify a person as important when I choose to have "do not disturb" on?

  • Screen shot capture problems

    I have a Mac Pro, and when attempting to take a screen shot using "Shift-Command-4," the content that I want is only captured sporadically. I've manipulated the image size, etc., to see if this was the problem, but there does not seem to be a consist