IPod won't respond, stuck on "now playing"

As stated in the title, my ipod is frozen on the "now playing" screen. The iPod will not reset. Toggling the hold switch has no effect. Plugging the ipod into the wall has no effect (does not switch to the charging screen). My computer (PC) does not read the iPod. I tried downloading the iPod updater and doing that, but of course my computer does not recognize my iPod.
Any ideas?

Matthew, I had a similar problem last night. Then this morning I just fiddled with it, going from one screen to another and it was fine again. Bizarre...
So you've tried to reset it? Toggle hold switch on and then off again, followed by holding down simultaneously Menu button + select button for about 6 seconds until screen goes off, then Apple logo appears.
I was suggested by a participant to this forum (King Cole) to restore the iPod. Try that if all fails:
http://docs.info.apple.com/article.html?artnum=60983

Similar Messages

  • My ipod won't respond to anything, not even my laptop. all it does is kepp flashing the apple logo. please help?

    my ipod won't respond to me or my laptop. it has been flashing the apple logo for an hour maybe. some one please help. i really don't want to lose my baby.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Ipod stuck in "now playing" mode

    but nothing is playing. I believe the problem started when I uploading a music CD to the itunes software. All of the songs read "Track01 Track02" etc. When my daughter selected "Track10" it went to "now playing" but no music. Now it's just stuck there. I've tried to connecting to computer in an attempt to delete the tracks, but no luck. It won't power down. Is there a way to reset, remove the battery, etc. to get this thing working?
    thanks, John

    Update....I read another post about how to reset and it is playing okay now. However, why does itunes not recognize the name of the songs instead of just "tracks" when uploading musical cds? Other songs that I transferred from "my music" over to the ipod had the names of the songs.
    thanks

  • Ipod won't respond to anything

    I have a 20g ipod with click wheel and color screen.
    First, my ipod wouldn't be roconized by my itunes. No icon came up in the source list. Nothing would happen when I would connect to my imac.
    Now, my ipod won't stop flashing the do not disconnect symbol.
    I have tried resetting my ipod but it won't respond to that either.
    The only thing that seems to change on it is when I plug it into an electrical outlet, the battery changes to charging mode. The battery was low but still green, is that part of the problem?
    can anyone help?

    I did that last night and nothing works. I know I don't have a dead battery because it was fully charged yesterday.
    besides, when I plug it into something, nothing comes up; not even the little "charging" symbol.

  • I have one of the original IPOD's and just tried adding a bunch of songs, (200) and now that they're on my computer my ipod won't sync as it now says i need about 8.45 more gb. any thoughts on this?

    I have one  of the oriignal IPOD's circo 2006.  I've got about 150 tunes on it which has been fine but today tried to add another 200 or so and was advised I need about 848 MB to load them.  Is there any solution.  I have 2 playlists.  One with the original 150 tunes and one with the addiitional 200 tunes. Thoughts as now my IPOD won't sync at all and I don't want to delete any of the songs if I don't have to.

    How much storage on the IPOD  -  I have one that has 60GB on it.   Also have an IPOD shuffle that held less songs.
    As your IPOD does not have enough storage for all of your songs, you have to create a list to sync to it that does not exceed the storage size.
    For instance my IPOD shuffle had its only list of songs that did not exceed storage.
    The IPOD gets them all because I only loaded the songs from my CDs that I really liked into ITUNES - leaving out the ones I skipped over.

  • My iPods won't respond or display anything

    I have two iPod touches that both went out at the same time.  They just won't respond to anything.  I have tried the methods in the troubleshooting section to turn them off but nothing happens.
    They don't appear to charge at all when I plug them into the wall adapter (I have tried three different ones, and confirmed them all work with my classic ipod) and they just don't respond at all.  I have held the home button and the sleep button simultaneously for over 2 minutes many times, and nothing happens.  When i plug them into the computer, nothing happens either... no chime to tell me a usb device was plugged in and no confirmation from itunes that anything was plugged in.
    Whats strange is that, when I plugged it into the car charger this morning, I got the recovery image on one of them instructing me to plug it into my pc for itunes to recover it.  By the time I made it inside, it went away and I was unable to recover it.  I was thinking maybe I need to let them drain again until the battery is completely depleted, but without indication of how much battery is left, i could be waiting for a month.
    Does anyone have any suggestions or ideas?

    Hi,
    See these Support Articles...
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    Device Frozen
    http://support.apple.com/kb/ts1445
    Backing Up Restoring
    The device must be restored from the computer it was last synced with...
    http://support.apple.com/kb/HT1414
    HTH,
    Cheers,

  • Artwork Column won't keep choice of "Now Playing" image

    Since updating to iTunes 9.2.1, I have noticed that my Artwork Column no longer keeps my preferred choice of image, the "Now Playing" image. When I select something, it immediately switches to "Selected Item" and stays there until I switch it back manually. Does anyone know a workaround to keep "Now Playing" selected (at least until the next bug fix)?

    I just tried that, and while it helped, I think, it didn't fully resolve the problem. iTunes still switches the image to "Selected Item", but when I start playing something, it changes to "Now Playing". So it's better, but I'd still like it to just use "Now Playing". Any other ideas?

  • Ipod won't display but music still plays and i can move around in menu...

    My Ipod mini won't display anything on the screen even after I reset it, I even hear the click type sound come from the headphones when its turned on. Right now I'm listening to music and the screen isn't showing anything is my screen broke???If it is what do I do???

    Open the iPod Software Updater application. It can be found by clicking on the Start menu, pointing to All Programs (Windows XP) or Programs (Windows 2000), and then point to iPod.
    It says that but in the computer I don't have an Ipod thingy in my programs???

  • IPod won't sync after restore - now iTunes freezes up and iPod is empty

    Two days ago my iPod started acting up - playing a song for about the first 10 seconds, then freezing up. I did the 5 R's - many, many resets, switching the USB port, reinstalling the software, and several restore attempts. The new and more pressing issue now is that, after a restore attempt, the iPod syncs to about song #50 (of about 1500) and then iTunes freezes up. Because of the restore, the iPod is now empty...no tunes...and I can't get it to sync. Any advice would be greatly appreciated.
    I fear this is a glitch with the new update? What is the solution here?

    I am having similar problems. My ipod was working perfectly fine in the morning and then at lunch time it said i needed to "connect to computer source and restore" i didnt have a computer at the time so i waited till i got home. when i got home i let it sit on my computer charging before i did anything. i took it off when it was fully charged and went to go listen to it. i listened to one song and in the middle of the second song, the music started to flicker and skip. i just shut off, when i turned it back on again ALL THE CONTENT ON MY IPOD HAD JUST DISSAPEARED. i was so angry and ive been calling around, reading the internet site pages and trying all that i can to fix this **** of a problem but nothing works. HELP ME PLEASE!!

  • My iPod won't respond to anything!!

    my 20GB iPod has been working fine since I got my new one in July. Just last night, however, it wouldn't respond to anything. I tried everything and I followed all of the instructions in the "iPod Help" section of iTunes. when I plug my iPod into the wall charger, it won't do anything; when I plug it into my computer, it won't do anything. it won't turn on at all! I have no idea what to do.

    I did that last night and nothing works. I know I don't have a dead battery because it was fully charged yesterday.
    besides, when I plug it into something, nothing comes up; not even the little "charging" symbol.

  • My ipod won't respond to anything. Its there anything I can do?

    So my sister spilled her protein shake on the bottom of the front screen of my ipod touch. So I quickly wiped off the goo and sprayed it with some gentle cleanser and wiped it off as well. Well, I had just gotten the ipod a week ago and so the protective cover was still on, and still sticky. So I peeled the cover off only to find that underneath the cover was sticky too. So I sprayed and wiped. I also took a small toothpick and cleaned out the edges because there was shake gooped up in there too.
    When I first turned on the ipod, screen's contrast was lighter; and it worked. Then after the cleaning, the screen apeared to be frozen and it still turned off and on. So I thought maybe I should plug it in to the charger and see if maybe it lost battery or that would unfreeze it. Soon after I turned it completely off, it would not respond to anything. It still is black and unresponsive to anything.
    I would return the ipod, however, my mom got it for me six months ago for christmas, but then, they decided to get me a laptop. So my mom kept the ipod just in case I wanted to buy it from her. So when I got straight A's, my parents gave it to me as a gift. I am unsure if I can still return it to our local walmart after this long period of time.
    Help would be much appreciated.

    Try here:
    iPod touch: Hardware troubleshooting
    However, the shake may have damaged the iPod and such damage is not covered by warranty.

  • IPOD won't respond or connect

    a week ago my shuffle stopped working. it wouldnt charge from a wall charger and the computer didnt recognize it. i let it sit for a few days and finally it responded to the wall charger. I fully charged it and used it a couple of times. then it stopped responding again. Same thing. compter wont recognize it (computer doesnt see it and no light on IPOD) and it doesnt respond to the wall charger. I know the computer and charger both work fine because another shuffle responds normally. any ideas?

    Perhaps the battery is/was on its last legs.

  • Strange Icon (Sad Ipod) won't respond

    My Ipod first froze when I chose a song last night. Now when I turn it on, the ipod shows the apple icon. After a few seconds of the apple icon and some "clicking" noises (as if the hard drive keeps on trying to restart), the strange icon (Sad Ipod) shows up. Whenever I try to restart, put into disk mode, and reset my ipod, the same strange icon shows up. I tried to restore my Ipod by plugging it in my laptop but "iPod updater" keeps on telling me that I need to plug my ipod in.

    Welcome to Apple Discussions!
    Your sad iPod icon and whirring/clicking sounds issue is most likely related to your iPod’s hard drive being out of place or corrupt in some way. You may want to get your iPod’s hard drive replaced, but before that, let’s try some things with your iPod.
    Have you checked out these links about your issue?
    The Sad iPod icon
    Sad iPod icon(post)
    Exclamation point and folder/The Sad iPod icon
    Have you tried resetting your iPod?
    Reset your iPod
    Have you also checked out the "iPod 101" info about this? It's a great place to start with Sad iPod issues:
    iPod 101 - My iPod is Sad (or Alarmed)
    I hope this helps you,
    -Kylene
    If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

  • My ipod won't respond

    I just recently purchased my nano. As instructed I loaded the software, but the ipod still isn't responding. I did the three RRRs as instructed and kept reloading the software, but still nothing. When I went to the device manager, it shows the ipod but it has this yellow exclamation point on top of the words ipod. After viewing the ipod properties it says "the drivers for this device are not installed (code 28). To reinstall the drivers for this device click Reinstall Driver." I click okay to reinstall the driver, put the ipod software cd back into the cd drive and it says it doesn't recognize it. The Ipod Updater will not recognize that the ipod is connected. I open iTunes and the ipod is still not showing. Can anyone help because I'm about ready to throw this darn ipod out into the swimming pool.
    dell pentium 4   Windows XP   yr purchased 2002

    Hey, thanks mazmedia.
    I went through the entire post that you listed, but still my ipod will not open up in itunes and I can't even update it. So, I called the 1-800 # again and the rep had me go through my computer to make sure I had the appropriate hardware, which I do. After, we checked the device manager and looked at the USB controllers. The tech told me I need a USB 2.0 Hub to operate my ipod. Since I initially connected my ipod to my girl friend's Mac my computer system is not picking up the ipod. So, before I go to a computer store, and spend more money to get my ipod working, can someone tell me if getting a USB 2.0 Hub placed on my system, will do the trick.
    People I'm desperate at this point because I'm ready to toss this pod in the pool.
    boopadoop

  • My Ipod won't respond at all

    I don't what's wrong. I can't get my Ipod nano to do anything. I've tried to restart my computer with it attached but it doesn't even seem to communicate with my computer. It won't turn off. Nothing happens when I try the click wheel. Help please! The hold button is not on so I know that's not the problem. What do I do?

    first toggle the hold swith then hold the menu and
    center button down for a few seconds!!
    FYI, that is a reset
    And by the way, Welcome to the Discussions!
    btabz

Maybe you are looking for

  • Airplay will not recognize a second AppleTV unit that I just purchased.

    I just purchased a second AppleTV unit and have set it up in our familyroom. The setup went well and all the connections and home sharing of two iTunes libraries have been completed and are working as they should. The only problem is with Airplay. In

  • How to convert a String("yyyy-mm-dd") to the same but in Date format ?

    Hi, can anyone plz tell me how to convert a String to a date format.I'm using MSACCESS database.I want to store this string in the database.So i need to convert it to a date format since the table is designed such a way with date/time type for date f

  • Sndpeek. real-time audio visualization

    Homepage: http://soundlab.cs.princeton.edu/software/sndpeek/ Screens: http://soundlab.cs.princeton.edu/images/sndpeek.jpg http://soundlab.cs.princeton.edu/images/sndpeek6.jpg http://soundlab.cs.princeton.edu/images/sndpeek2.jpg http://soundlab.cs.pri

  • How to display an ADOBE FORM in the same view

    Hi forum   I am displaying an Adobe Form in a view of Web Dynpro for Java, but when this open, the adobe form open another windows with de pdf... how can i diplay this adobe form in the same view ? Thnks Josué Cruz

  • Help on UDF

    In an UDF, I want to access the whole XML string the mapping is applied to i.e. the <b>complete</b> source message structure. Is it possible? Regards, Amol