IPod Won't Turn On After iOS8 Update

Hello,
About a week ago, my mum upgrade to iOS8. For a few days it was working absolutely fine then the other day her iPod just wouldn't turn on. I used the Menu+On/Off button to reset it and we were able to get it to turn on, however the next time it was turn off it wouldn't turn on again so she had the use the reset method again.
I did a restore to one of her back ups to see if that made a difference but she is still facing the same problem.
We were wondering if anyone has a solution? Once the iPod is on, it functions and charges as normal it is just a problem with turning it on.
Any help will be deeply appreciated!

Try:
- Reset the iOS device. Nothing will be lost      
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. Done
- Reset all settings                            
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                               
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.                       
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
  Apple Retail Store - Genius Bar

Similar Messages

  • 80G iPod won't turn on after software update

    Downloaded new software for 80G ipod. Walked away while it was downloading. When I returned, ipod no longer showed in itunes and now ipod will not turn on or show up in itunes. Help!!

    Deleted iTunes and Reinstalled Works Fine Now.

  • HT1222 iPhone 5s won't turn on after this update. Battery was at 98%, tried holding sleep & home button while plugged in, no good. Any ideas?

    iPhone 5s won't turn on after this update. Battery was at 98%, tried holding sleep & home button while plugged in, no good. Any ideas?

    P.S. I just noticed; when I hold the power and home button at the same time while it's plugged in as if I was going to restart it, my computer acts as if I'd plugged it in again (it makes the USB notification sound, itunes opens up again, I get the same "your iphone is in recovery mode" message, etc.), but that's the only response I've been able to get from pressing anything on the iphone. thanks again.

  • My iphone won't turn on after recent update

    My iphone won't turn on after recent update. How do I fix this?

    2 more options:
    Restore from backup
    Restore as new
    http://support.apple.com/kb/HT1414

  • Iphone 5s won't turn on after the update

    iphone 5s won't turn on after downloaded recent update

    Hey lillyluv2010!
    Here is an article for you that will help you troubleshoot this issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Help!  Ipod won't turn off after disconnecting

    Okay I've had my Ipod nano for like 3 weeks. I've used it once. It worked fine when I first got it and after my battery ran out I haven't used it for about a week. When I got it back I hooked it up to my computer and updated the stuff on it as well as let it charge. After is says to safely disconnect, I disconnect it but it automatically turns off and won't turn back on. I've tried resetting it and nothing works. I thought the battery was dead but I've left it plugged in (not only USB on my computer but also tried an outlet) and it never completely charged. I've even left it plugged in overnight (well over the 4 hours it's supposed to charge). I have no idea what to do (It also took like at least a full day to completely charge the first time I've had it)

    for instructions on resetting http://www.apple.com/support/ipod/five_rs/

  • IPod won't turn on after changed

    I ejected my iPod on My Computer after changed but it won't turn on. It's not even detected in iTunes or My Computer. I can barely see the Connected... Eject before disconnecting... All the tips don't help, I can't do anything with it...

    You could have a bad battery.
    Patrick

  • My iPod won't turn on after putting it into DFU mode

    I've tried the recovery mode after my iPod disabled for 4 times, unfortunately the recovery mode didn't work so I tried the DFU mode.
    After putting it to DFU mode the screen suddenly turned white then turned back to black immediately.
    I tried plugging it on my computer but it won't turn back on again.
    Please help me.
    iPod touch 4th gen iOS 6

    You can try the following but it may not work
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Help! Phone won't turn on after ICS update

    So I just updated my phone a few hours ago. I looked down at it to see if it was finished and noticed it was off. When I tried to turn it on it wouldn't power up. I've had it on the charger for an hour now. When it goes on the charger, the red Motorola insignia comes on the screen but nothing happens after that. My phone may have died during the upgrade so that could be the problem. I've reset it about 10 times and it still won't turn on. Any suggestions???? I had a baby a month ago and would be devastated if I lost my pictures.

    Jess i can tell Ya is Hook your Razr up to the Charger and Leave it on there for about 3 Hours Maybe 4 and then with the Charger Hooked to it Try to Restart it.. if you Can See were your at on the Download it Takes about 15 Minutes for the Initial Download then the Phone Will Power itself but should Come Back on and Finish the Rest of you Will see the Little Android Character And Below it A Rectangle box and you should see another Bar in Yellow moving across it. When that's Finished Give it some Time and it Reboot itself and then Update you Apps then it should Finished After That.. But hopefully By leaving it on the Charger for a While Will pull it out of the State it's in Now..

  • IPod won't turn on after Soft Reset?

    My 8GB iPod Touch has been lagging and glitching a lot lately. So I did a Soft Reset, and now the black screen with the little silver Apple logo is on there, and stayed there for 30 minutes. If I press any button, it'll go all white and restart the reset.
    Now I've waited for about an hour, and it won't turn on. Plus it won't connect to my iTunes if I plug it into my laptop.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Mac won't turn on after software update ( newest update if mountain lion)

    Update my Mac book pro with newest software update if mountain loin and now won't turn on?!?!?

    Intel-Based Apple Portables: Troubleshooting a computer that will not power on

  • Iphone wont turn on after iOS8 update

    I was updating my Iphone with iOS8 update through iTunes on my laptop it went all through until the end i unplugged my phone as it wasn't doing anything then it come up with iTunes logo and charger logo and now it wont turn on at all, I've tried holding the top button and home button and charging it, nothing is working! help me!

    I eventually got it to work by constantly, over and over again,  plugging the iPhone into the mac with my finger on the home butting until one time it recognised it then I went through the factory reset setting for it to just drop off the iTunes pane and jam on me again. I did the same thing (I know the definition of insanity is trying the same thing over and over again and expecting a different result!) again until it recognised it again and thankfully this time it went through all the factory reset process and updated, losing unsaved videos of my sons birthday party the day before in the process ( I thought they got saved to the cloud too, but apparently they don't!) so thats how I fixed it.........that was last Thursday......Today I thought it would be safe enough to update my iPad and guess what? I have been sat here now for an hour, same thing, the update came down, the iPad was prepared for update, the screen went on to the logo screen the bar got to 100, the device disappeared from the iTunes pane and the iPad is stuck in the restart screen!!!! Its been that way for an hour now!!! I am not a happy bunny!!! now I will swiftly be going over to the iPad forums to see if there is any info there about it or should I just try what I did with the phone???? Either way this *****!

  • IPhone5S won't turn on after software update

    iPhone5S is bricked after software update.  Apparently this is becoming widespread.  Hello, Apple??????  http://www.techienews.co.uk/976861/apple-ios-7-0-6-update-allegedly-bricks-iphon e-5s-ipad-air/  http://www.thebitbag.com/iphone-5s-and-ipad-air-bricked-by-apple-ios-7-0-6-updat e/70286

    Hey Stheus3,
    Thanks for the question, I understand how frustrating this may be. It sounds like the update process may have been interrupted, and to resolve the issue, we’ll need to restore your device in recovery mode with iTunes:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    If your device is not recognized in iTunes for Windows while in recovery mode, see this article (Specifically Step 5, sub-step “If the device is not recognized while in Recovery Mode”)
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • IPhone won't turn on after software update

    Last night I went to update my iPhone 4S to the latest iOS 7. I went to sleep while it was updating and it was charging and when I woke up it wasn't on and it kept vibrating every few seconds when it was charging. I tried to turn it on, then I tried to restart it and held the home and sleep buttons for 20 seconds. I tried connecting it to iTunes and iTunes won't detect a device. Any help??

    I tried to restart it and held the home and sleep buttons for 20 seconds.
    Try it this way ...
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
    Then press and hold the Sleep/Wake button until the Apple logo appears.

  • Iphone 4S won't restore backup after ios8 update

    I updated my phone to the new iOS8 this week. I made a backup of my phone on my computer, and now it won't restore. It gets to within 5 seconds of completion before giving me the following error message.
    I tried the steps in this article, but nothing has worked. All my contacts / photos messages have been wiped and I'm hoping to salvage these.

    Make sure you are using a USB port directly on the computer, not a USB hub, and a rear rather than a front port if your computer is a desktop or tower case.
    Disable your antivirus before restoring. If your antivirus is Kaspersky you may have to completely uninstall it.

Maybe you are looking for

  • Last part of long texts are not spelling checked, why?

    I use FF as spelling checker for long HTML files. It seems that after about 10 screen fulls the spelling checker stops working (which I notice from HTML tags not being flagged after 10 pages or so).

  • Why is there extra white space at the top of swf file?

    I can't figure out how to get rid of extra white space in the browser at the top of a swf file. It looks fine when I preview the file, but when I do publish preview in flash/ try to incorporate in HTML, there's an extra 1/4" at top of window.

  • Can we set User roles/permissions for a content that is stored in Contentspace at the end of Process

    Friends, I have a requirment where a set of approvers approve a form and at the end of the process i store the form as a pdf in the contentspace. My requirment is that, can we set roles/permission for the file that i store in the contentspace and all

  • Font 'boldness' goes missing during bursting

    I have incorporated our corporate branding font into a report. Some lines are normal, a few select are bold. I have created Fonts and Font Mappiong sets in XML PUb Administrator, and added the font info to the xdo.cfg file. I have set the FO Processi

  • Updating KNA1 field PSTLZ

    Hello all, I am trying to update a field in KNA1.  As ou know the user exits for the customer master do not have access to update this table.  I tried several BTE's also with no luck.  They do not have access to KNA1 fields either. I need to do this