Ipod wont recognise on pc and comes up with can't mount ipod
Yea my ipod keeps flashing with do not disconect and it is annoyin me then i disconect it after bout 5 minutes of waiting them my come displays can't mount ipod if anyone can help would love to hear thankss
- Try placing the iPod in Recovery Mode and then restoring
- Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer.
Similar Messages
-
Latest i-pod touch wont sync, computer freezes and comes up with error -21 when i pull it out
Latest i-pod touch wont sync, computer freezes and comes up with error -21 when i pull it out of the usb port
Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694
Next I would try placing the iPod in recovery mode and then try restoring the iPod. Note that this will erase the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Can't connect then comes up with can't mount.
People, plugged my perfectly good 4th gen ipod on pc as normally as had been working fine but it asked me to reformat. so, did full restore and when then tried to connect it comes up with same message but when up dater comes up it takes ages before coming up with "can't mount ipod." Making a really loud ticking noise while trying to connect. can see it in windows but can't access disk. Then can't safely remove it and it's still saying do not dis-connect!
any ideas? Please!re-post this question in the FaceTime for Mac forum.
-
IPod won't restore...error message saying "Can't mount iPod"...
I have determined that I need to restore my iPod based on my problem (I manually update playlists and cannot add a playlist because I get an error message saying "The disk cannot be read from or written to.") So I open iPod updater 11-17-2005 to try to restore my iPod and I get an error message saying "Can't mount iPod". I can't restore or update my iPod because of this error message. Can anyone help me? I've been all through the discussions, online help, etc., and can't find this particular error message. Thanks!!
I came to charge my iPod because the battery went low, after few minutes it came on with this do not disconnect, i tried to restore it also says can't mount, it has been exactly two days. I disconnected the iPod and the backlight and the message did not go off until the battery ran out. I also need some help my address is [email protected] Seriously I just got my iPod click wheel 30Gb color display, video, photo.
-
I have found with iTunes 11 that to move music over on my iPod it works very well and shows the 'on this iPod' button when you click on the device.
With my iPhone however, you can click on iPhone but then there is no 'on this iPhone' button or the add button?
Is it something to do with the settings on my phone?
Please help as Zi wish to transfer some music across.
ThanksSome other posts seem to indicate that the cause is related to voice memos. You may want to try the remedy described in this document
http://support.apple.com/kb/ts2830
although it says it's for the 6th gen iPod nano. -
HT201413 my iphone wont restore and update and comes uo with -1 message
my iphone 4 wont restore or update and comes up with message code -1 any help ?
Perhaps try the Error 1 or -1 advice from the following document:
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
I was told to uninstall then reinstall itunes because "no apple application support", so i did, now it wont recognise my iphone and says to unistall+install the 64-bit version of itunes so i did, again..and again..still nothing please help me?!
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
I have a brand new i phone 4s and i have updated the soft ware to the 5.1 and tried to restore it to download my old contacts and apps etc. and my computer now wont recognise my phone and itunes will not do anything can any body help please???? i need this sorting asap xxxxxxx
see if this link helps http://support.apple.com/kb/TS1538
-
I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
Please help my ipod touch is no longer syncing to my computer fully and comes up with "unable to start a session with ipod" and the ipod sign disappears when you try to click on it to see what's happening.
ThanksTry:
iphone could not be synced sync session failed to start...: Apple Support Communities
Sync Session Failed to Start iTouch iOS5: Apple Support Communities -
Hi i have just tried to update i tunes and it has crashed and uninstalled i tunes off my laptop. I have tried to install i tunes again but it wont and comes up with error messages
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Message was edited by: turingtest2 -
Itunes wont open. After installing it, It wont open. It only comes up with an itunes software licence agreement then it disaperes and nothing happends? any sujestion will be greatly apreciated.
hi Shaun!
after installing the update for iTunes, it doesn't run (comp makes noises but nothing comes up on screen). when i open task manager itunes is running as a process, but i can't end process.
hmmm. okay, Norton is still our prime suspect here. that "running itunes.exe process that will not die" symptom is associated with the nastier versions of the NIS 2005 launch suppression problems. (people who get that also often see things like looooooong sloooooow shutdown times on the PCs and odd end program dialog boxes.)
let's try throwing the trusty Lorraine M technique at the beast. (it usually fixes the nastier versions of the NIS 2005 problems.)
Lorraine M: NIS/itunes problem rectified
love, b -
Can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document “SC1ATK63.mov” could not be opened. The movie is not in a format that QuickTime Player understands."
Hi,
Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through. -
My ipod wont charge at all and there is a continuous charging sign when plugged in ? what can i do
my ipod wont charge at all and there is a continuous charging sign when plugged in ? what can i do
- Have you tried differnt cable/USB port?wall chargers
- Have you tried resetting it:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- When you connect it you computer doe you se the iPod in iTunes? If yes I would try restoring it. First from backup and then to factory defaults.
- You may have a battery or hardware problem and thus an appointment at the Genius Bar of an Apple store may be in order. -
My ipod touch does not restore properly and comes up with an unknown error (9). What do I do? I have tried restoring it a few times and it keeps coming up with this error. Yet on Itune on my computer, it tells me that the ipod software is up to date. ipod screen is just showing the itune logo and a usb connector.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
http://support.apple.com/kb/TS3694#error9
Maybe you are looking for
-
Font substitution after upgrade from 46c to ERP2005
In 4.6C systems in SAPSCRIPT I can chose HELVE font in various sizes from a drop down list. In ERP2005 systems I can only choose a font family HELVE. I can then type size 9pt. In print preview everything is okay however, when printing to a printer t
-
Number of rows in a report, can it only bee set at creation time?
I'm unable to change how pagiation work for a report. If I create a report with the default setting, it will show 15 rows as expected. However if I edit the page, go into the report and change the "Number of Rows" it seems to have no effect. I set it
-
I see there is a small space for a picture of the contact in the Contacts vCard on the iPod. How do you add a photo to the vCard, and what size in pixels is generally recomended? I'm using Microsoft Outlook to put the vCards together.
-
Clearing to Special Ledger Field
How do you get this field to appear in the FS00 GL account creation screen? I know you need one of the latest ECC release versions to have it enabled but I'm wondering if there's anything else required besides that to get that field to appear (e.g.
-
Using Obvious library results in error in Awesome WM
Hello, I'm trying to configure Awesome to have a battery meter. Using Obvious seemed like the easiest route. When I add even this one line to my rc.lua: require("obvious") I get this error when running Awesome: /usr/share/awesome/lib/obvious/lib/ho