Ipod wont respond in any way shape or form
I have the 1st generation Ipod touch but it has softwares updates, the latest until th point that i couldnt not update no more. if im not incorrect its the 3.1.2? maybe im not sure anyways. The other day i had it at under 20% when i needed to do somethng urgent on it and then it shut off(because of low battery) then i tried to turn it on again and opened Safari before it completely died again. The next morning i plugged it in and it just went to the black screen with the Gray Apple Logo on it and then it just turned off again, not showing the normal Battery charging picture or anything. I tried everything and nothing worked, switched the cables, tried charging it with my Xbox, another Computer messed with the only two buttons that are available and nothing helped. Today the situation worsened as now it wont even turn to the black screen with gray Apple logo. How can i possibly fix this by myself? Any sugestions? I would truely truely truely truely appreiated it if you some way to fix this. Any ideas what the problem might be?
Well my friend im sure this is the answer you wanted but, I think that it has died. You can try to take it to the genius bar but i think they will tell you the same thing. Technology ages. The processor built in wasnt designed to proccess iOS 3.x.x or above. It dosent have enough power to do so and it can overload and die.
Similar Messages
-
My ipod only shows apple on front and wont respond to any buttons.
My ipod only shows a spinning wheel and a apple and wont respond to any of the buttons to see what may be on it,it was a gift..
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HELP! I bought a new Mac (my first) and used my nano as an external hard drive to transfer my itunes library from my old PC to the new Mac, then re-synced the nano. However, something happened when I transferred because it duplicated every song. So I went through the entire library (about 1400 songs X 2) and deleted the duplicates, then emptied the trash. Then when I tried to listen to the music, I found that about half of the songs cannot be located! I have my entire library still on my ipod ouch - is there any way to transfer them??!! Somebody help me please!!!
check out this post by Zevoneer.
also, there are PhoneView and iRip.
edit: and start backing up !! you might want to bookmark this article for future reference: The Complete Guide to Backing Up your iTunes Library -
My 4th Gen iPod Nano isn't displaying a "Use iTunes to restore" message, but iTunes is displaying a restore message when I connect it. I have original music that I can't back up on my iPod. Is there any way that I can fix the iPod without restoring it?
It's not designed to work like this. When you sync, the iPod stores some information that basically says 'this iPod belongs to computer xyz'. Apple did this to prevent copyright issues (syncing someone else's music).
If you really want to do this, you'll have to at least tie both iTunes installations to the same account. Maybe have them sync with each other. -
MacBook Pro. Was Streaming radio. When came back to computer it appeared to have shut off. Now can't get it to respond in any way. Now that you can't remove the battery, I don't know how to get it to quit, although it doesn't appear to be making any noise, so might have quit on it's own. Any ideas? Thanks!
I honestly don't remember what it came with though I do remember having two drives so long ago. Since then I've had to replace them with newer, faster ones, and just didn't really need a second drive. I don't copy cds, I just need something to read DVDS (which the current one doesn't seem to want to do) and occasionally burn something.
I bought the MacPro becuase I am a tireless multitasker, having super memory eating programs on at all times. Right now I am working in Photoshop while watching a movie, with two P2P programs open, two chat programs and surfing the internet, with two monitors active so I can see everything.. I can't imagine the average pc doing this wthout blowing up Mac Pros are the ultimate computer for those that like to do a lot at once.
The speed and memory capacity of the Mac Pro make it the best computer hands down to handle a mind that can't be satisfied with doing just one thing at a time!
And six years after buying it, it can still eat the average pc for breakfast How's that for great? -
My iTunes library on my PC only displays "A" and some "B' titles (170) of the 3800+ titles which are on my iPod. Is there any way I can load the songs from the iPod to the PC library?
Sync the music from yur iTujes library on yur coputer to the iPod.
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod.... and follow the instructions. -
I have an icon thats appeared in finder ..i don't know where its come from and what its for. It doesn't respond in any way when I click it.How do I get rid of it?
I can't select it .. I click on it and nothing happens. The only thing I seem to be able to do is a two fingered click which brings up a context menu for the side bar preferences..but unfortunately this icon does not appear in the list.
-
My 9 year old daughter just recently lost her iPod. Is there any way we can track it., My 9 year old daughter just recently lost her iPod. Is there any way we can track it.
IF she set up find ny ipod on the ipod itself BEFORE it was lost, AND it is on, AND it is connected to wi-fi, then she may be able to get an approximate street address using the find my ipod service.
Otherwise, no.
iCloud: Find My iPhone
iCloud: Find My iPhone overview
iCloud: Set up Find My iPhone -
someone please help. My video ipod wont respond. Ive tried everything. I plugged ino my computer and tried reseting it?( pressing the select and menu button) nothing works what should i do!! I have been trying for the past three days.
I'm not trying to be sarcastic or anything, but is hold on?
troy -
HT1212 i have lost my ipod touch is there any way to get it back
i have lost my ipod touch is there any way to get it back. i had given pass code for my ipod touch
If you had turned on the find my iPod, and it is on and it is in range of an open wi-fi network, then you may be able to get an approximate street address.
Otherwise, you would have to look for it as you would anything else that you lose. -
i lost my iPod touch , is there any way i can track the information if that person restore the iPod in factory setting .
No, I'm afraid not.
-
My ipod screen wont respond to any touch
my ipos wont respond at all any fixes ? my disconeccted wire ?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
need answers to why my itoch does not respond to any sliding comands, like unlocking or turning the power off
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Ive had my Ipod since last christmas, so almost a year. my warranty is about to expire too..anyway. I was listening to my music as usual and i was using shuffle. I pressed >> so i could skip some songs, then my ipod stpped playing my songs (showing the song on screen, but then just went to the next, paused, went ot the next without playing) it then just shut off and it wont turn back on. I was on half battery and i really dont knwo what to do. the hold button was off, i tried to chrage but it wont respond, help!
On December 20th 2005 my iPod Clickwheel [4th Gen] (40G) failed, the built-in self-diagnostic routines telling me that there was a hard disk failure. I called Apple and was informed that I would have to pay £169 to get the device “repaired” (actually what I would be doing is purchasing a refurbished iPod). £169 is 61.5% of the price I paid the AppleStore in September 2004, some 15 months earlier.
In speaking to customer relations, I pointed out that I have purchased lots of other hardware and software all from the AppleStore over the past two years including three Macs each with AppleCare plans and I’ve been a .Mac member since its inception. None of this made any difference.
Macintouch have completed surveys that make it clear that, in their own words, “. . . the iPod 40G ClickWheel is a lemon”
http://www.macintouch.com/reliability/ipodfailures.html -
I Tunes has lost quite a large proportion of my music library. I think this may have happened when I tried to download a previous version of ITunes that failed to load. Whatever, the music is still on my IPod. Is there anyway files on an Ipod can be transferred back into ITunes? Or is there any other way I can try to recover my music files? Also, I no longer have any confidence in ITunes ability to store data efficiently and wonder if there is any way I can back up my IPod outside ITunes?
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself independently backed up against loss. To use a device with a new computer you transfer the content from the old computer (or its backup) directly to the new computer, not the device to the new computer. Media syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Maybe you are looking for
-
How to put the form scope in session
Hi, In struts you have the option of putting the scope of form as sesison in struts-config.xml.How do you do the same thing in weblogic workshop 8.1?Workshop automatically generates the config files for each workflow and it puts the default scope as
-
Burning the slide show in iphoto
Hi there I probably am being stupid but here goes. The slide shows you can make very quickly in iphoto are really really good and quick and simple to edit and select music etc. Is there any way you can burn it from there.
-
[Lib: Development] ODE + OPAL + tinyxml
packages are 100% working OPAL is a nice, high level physics layer on various physics libraries (currently only ODE, however its abstraction is very clean) anyone whos used commercial libraries like Havok will really like this one. ODE isnt the best
-
Hi all, I'm trying to load a table from my source systems to my target table on staging area. I just have source table and target table on my mapping. When i try to execute this mapping i get the error "ORA-02063". 1- i have several other mapping fro
-
TimeFormat() statement that worked now fails
I've been using the statement below to create a date/time string like "2007-10-17T11:26:01Z". <cfset strDateTime = DateFormat(Now(), "YYYY-MM-DD") & "T" & TimeFormat(Now(), "HH:mm:ssZ")> This has always worked correctly but suddenly on one of our pro