IPod wont turn on after update

I just updated my iPod with the latest update and it froze while it was rebooting with the progress bar at the bottom of the Apple logo start up screen. I had to reset it and when I did the iPod wouldn't turn on. It wont respond to anything. I've tried reseting it, pressing every button, putting it into disk mode, and plugging it into a computer. My computer won't even detect it. It shows no sign of life at all. Its not on hold. What can I do here? I cant find a solution anywhere.

Well then take it back to where you got it and comlpain. This is not normal.
What did yo do with your iPod before this happened?

Similar Messages

  • My iphone4 wont turn on after updating to ios5

    my iphone4 wont turn on after updating to ios5

    Hi
    Sounds like it's broken in a potentially major way after the drop. You really should take it to your nearest Apple Store/Apple Authorised Repair Centre a diagnosis and quote.
    Can't think of anything else any of us on this user-to-user forum can do for you?
    HTH?
    Tony

  • Ipad air wont turn on after update today?

    ipad wont turn on after update today. cannot do a hard reset either...
    tried holding the power and home at the same time, still won't turn on suggestions?

    How long did you hold the power and home buttons?  You need to do that for about 30 seconds, sometimes even more before the apple logo appears.

  • IPod wont turn on or update after iTunes 7, please help

    It's a 2004, 20gb iPod with click-wheel. A friend gave it to me, if I can try to repair it. Apparently it died after installing iTunes 7. The iPod wont turn on or respond to anything. The only time it does is when its connected to a computer. At first iTunes reported that the iPod is corrupted and needs to be restarted. And when it turns on, theres an icon with an exclamation mark and an URL pointing me to Apple's support. At first i tried with various older firmware files and I got the messega that there was an error formatting the ipod. iTunes 7 gave a 1418 or 1429 error at the end of the updating process.
    I tried with resetting it, putting it in the disk mode and then erasing and/or partitioning it with Disk utility and it was always the same. I tried unplugging all the other devices when updating, just like recommended. Again nothing worked.
    Here comes the peculiar part:
    Then I did a complete erase, writting zeros over the whole disk in Disk utility. It took ages and then finally stopped with an error just before finishing. After that I can update my iPod just fine with iTunes 7, I can even name it again and start adding songs(it takes forever for just one song). Even older updaters say its fine. But after unplugging it from the computer its still dead and it still displays the error icon. All that got me so confused.
    I find it hard to believe that a hardware error suddenly appeared just after installing iTunes 7 and I am really hoping for any help I could get because I dont want to give up on it just yet. Thanks.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • My Ipod wont turn on after i update it!!!!

    I was was updating my ipod to th ios 5 or 6 nd it ran out of battery. Now it wont turn on!!! Help

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Iphone wont turn on after update

    This morning i decided to update my phone, so after the hour that it took i forgot about it. So a while after i decided to screw around with it and it wont turn on. seemingly dead. WHY? Also power button doesnt work BTW

    $149 US for an Out of Warranty replacement.
    Apple does not repair devices.

  • HT4623 my phone wont turn on after update

    i was updating my phone my wife reset the phone and now it wont turn on.  the apple shows up

    are you within your 1 year manufacturer warranty?
    If your not able to restore the phone...from a backup ...issue still persists. You can set a Apple retail store appt.

  • Need Help phone wont turn on after update to 6.1.1

    hello
    i did the update of the 6.1.1 yesterday and everything was okay but now my battery says its 1% my phone wont turn on at all how can i fix this my battery was fully charged and still in charger it went from 100% to 1% in less then a hour please help i cant even turn on my phone

    Reset the phone (no data loss): Press both the home and power buttons for up to 40 seconds, releasing when the Apple logo appears.

  • HT4061 my phone wont turn on after update  HELP!!

    updated the software on my iphone 4  now there is a flashing apple & the phone wont turn on.  HELP anyone know how i can fix it?

    http://support.apple.com/kb/ht1808

  • Ipod touch wont turn on after update!!

    I had plugged my ipod into my computer and popped up there was an update so i did the update. Now the screen has had an apple and loading bar for the past three hours! I tried to reboot it and it just goes back to the same apple screen with loading bar, does anyone know how I can fix this PLEASE!!!

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Ipod wont show songs after updating.

    Hi there, I have a Ipod 30gig Video. I have just done the 1.2.2 update on it. I am running windows 2000. The only way I can get my songs back and lists, is to plug it into my mac laptop, then Eject it. It seems as Itunes does not support windows 2000 no longer (no further downloads for win 2000)I cannot view my songs after ejecting it. I am not very happy and would not have updated the Ipod firmware if I knew this was going to happen.
    Can I reverse my firmware with an older one somehow? What shall I do?

    I am having the same problem!!!! have you resolved this issue yet? I see noone has replied with an answer its really frustrating. I have a friend at work who plugs it into this ipod thing he has sorry i don't know the name of it. He plugged it in to try to back up my music but didn't have enough space so when he disconnected it i was able to listen to my music again! when i plugged it back into my computer at home and at work all the songs disappeared again when I disconnected it!! I don't get it!! He suggest's I delete all my songs after I back it up of course and start from scratch! I don't want to do that 'cause it will take forever to get all my stuff back on. There has to be a better way! and APPLE should have warnings before they just throw out updates!!!

  • [URGENT] Torch 9850 wont turn on after updating, gets stuck at 60 - 70% went booting up, and if I try to start it in safe mode it gets to 60% and shuts off.

    Hello everyone how are you? Im having a problem as you can see with my 9850. One day i woke up and it wouldn't turn on, did battery pulls and still nothing. It was fully charged too. I connected it to the computer and updated it. During update error messages came up saying it couldnt connect to app loader. Eventually updating was complete. It booted up and stopped at about 60%-70% and stayed there for hours until it shut off by itself (probably the battery died). I did a batt pull and the same thing happened. i wiped the device with bbsak, reloaded the OS, and got the same result. Even the whole app loader error message came up again. Went to the forums to find a solution and tried opening in safe mode. Everytime i try to open in safe mode the phone shuts off and reboots. So now i have run out of options. Can someone please help me get my phone back up and running please. Id really appreciate it.

    You might try again, wiping with BBSAK and again loading the OS fresh.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Phone goes into standby and wont turn off after update!!! please help me as hate it

    On Friday I turned my phone off as per usual and turned back on in the morning to find the phone totally different.
    The red lock button now only sends the phone into like a sleep mode, and i cant find any where to turn it off.
    The screens keep fading down and I have re set the backlight to not dim but some thing is over riding it.
    I used to love my phone and now hate it so much, is there a way of booting this update off my phone and putting it back to how it was. I tried to restore and its the same and then tried to put the phone back to previous settings I had stored on my lap top but again nothing.
    I now have some new blackberry software on the lap top too which now does not even recognise my phone and there for the past restore points I had.
    My daughters bold 9700 does the same thing now too, please please help

    Hiya!
     Blackberry doesnt actually "turn off" it only goes into a standby mode (press and hold the end call button). To fully power it down, you would perform a battery pull.
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

  • Motorola Droid Maxx wont' turn on after update this morning

    I received an update notice on my phone a couple of days ago.
    I updated it this morning....it started the process. When I checked back later, the phone was off and won't turn back on. Please help!

    Hi there,
    Thank you for replying. I followed your step. However, I got only till Step 3. There's no "Droid triage screen". Just a black screen with the following in white letters :
    AP Fastboot flash Mode (S)
    OA.77
    eMMC Info: Size 16G
    To return to normal mode - first press power key to power down
    Device is LOCKED, Status Code: 0
    Battery OK
    OK to Program
    Connect USB
    Data Cable
    That's what I got. Everytime I tried Step 4, the phone turns off and I went back to Step 3 and the above shows up.
    My Razr Maxx is old. It has a broken screen, and a very abused frame, but it works great. If there's still a replacement option, I'll be grateful.

  • My iphone 5 wont turn on after update

    In the middle of doing an update last night the phone tuned off.
    I left it charging overnight (there was 40% anyway)
    This morning ive tried everything to turn it on.
    It's a month old and its in excellent conditon.
    Please help

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

Maybe you are looking for

  • Link-Group Asset Class, Depreciation Area & Depreciation Key

    Dear Experts, I am new to FI-AA Customization & have a basic query about Group Asset Concept. I am working on Ecc 6.0 & for Country India. I want to create Group Asset for calculation of Depreciation as per Income Tax Act.  Hence there is just one De

  • Installing on macbook pro.

    hi, im a student who is trying to install photoshop cs5 extended onto my macbook pro. i have completed an online form and attached a scanned student id card with it, but i am not sure what to do now. i have not put the disk in as the instructions say

  • Show progress bar and percents when packaging a native installer with adt packager

    Hello, Below is a simple example using the AIR's NativeProcess for compiling an air application into a native installer... Everything works fine, so at the end of the NativeProcess, the native installer (*.exe) is created... In this case, the applica

  • Putting attribute value from java level into sessionScope variable?

    Hallo, is it possible to put an attribute value from java level into a sessionScope variable? For example when i'am in prepareSession is it possible to fill a sessionScope variable which i can use in a jspx-Site? And when how i must do it? Any help i

  • NCA Macro For R12

    Dear All, Actually we are using Macro for Uploading Data in oracle 11 i but Now my company have changed the version to Oracle R 12 the MAcro we are using in Send_rows macro developed by Below Mentioned People , Now i need something like this for R12