Ipod wont turn on or restore

my ipod 4th gen has the glass broken off were the front camara is and a cable came off so i put it back and the screen went white didnt reset so i waited till battery raned out now it wont turn on and updated itunes wont restore it please help!!!

Try a manual restore, as noted in link below.
Basic troubleshooting steps  
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Similar Messages

  • My 4th Gen ipod wont turn on or restore.

    It says that the connection timed out. any help?

    Try a manual restore, as noted in link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I just bought my ipod and hooked it up to my laptop, and i clicked restore files, but my ipod wont turn on or off

    i just bought my ipod and hooked it up to my laptop, and i clicked restore files, but my ipod wont turn on or off

    Try here:
    iOS: Not responding or does not turn on
    Is the iPod on or off?
    Did it work before you tried a restore?

  • My daughters iPod wont turn off and has a blank white screen. i tried to restore it to the original state and it is still the same. is this fixable? thank you for your help

    My daughters iPod wont turn off and has a blank white screen. i tried to restore it to the original state and it is still the same. is this fixable? thank you for your help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Ipod wont turn on unless I restore it and even if I do it turns off after few hours and wont turn on again unless i restore it again?

    ipod wont turn on unless I restore it and even if I do it turns off after few hours and wont turn on again unless i restore it again?

    Are you restoring the iPod from a previous back or to factory settings? If you haven't restored to factory settings yet, I would do that next.  And if the problem still continues, it's most likely hardware related, in which case you'll want to schedule an appointment at your local Apple Store/Genius Bar to have them take a look at it.
    B-rock

  • How can i get my contacts from textfree app if ipod wont turn on

    Can i get my contacts from textfree app on my pc if ipod wont turn on?

    If iTunes does not see the iPod then:
    - See if you can extrac themn from an existing backup
    iPhone Backup Extractor for Windows and Mac
    - Restore an iPod 2G or later, iPhone 3G or later or an iPod from existing biPod backup. The apps have to be in the iTunes library in order to have a place for the app data to go.

  • Ipod wont turn on /show up my computer

    hey there
    my ipod wont turn on. it sounds as if its firing up, then fails and displays the sad i pod icon. I've tried restoring factory settings etc but because my computer wont recognise it this can be done
    if anyone could help me out i;d be very grateful
    Thanks

    The Sad iPods icon or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
    1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    Still can't see your iPod?
    Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
    3. Try to wait 30 minutes while iPod is charging.
    4. Try another known-good FireWire or USB through Dock Connector cable.
    5. Try another known-good FireWire or USB port on your computer .
    6. Try to disconnect all devices from your computer's FireWire and USB ports.
    7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
    9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
    “Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
    - I tried the 5in1 test and got and error on Firewire.
    - I did the HDD R/W and surprisingly it passed.
    - I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
    My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
    Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
    10.Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
    Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
    Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
    Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
    But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
    I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Pictures and instructions of how to open the iPod case for battery replacement
    http://www.kokopellimusic.us/KM_instructions.htm

  • Ipod wont turn on nor charge how do i fix this?

    ipod wont turn on nor charge how do i fix this?

    - First try resetting the iPOd.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next connect to your computer. If it shows in iTunes restore the iPOd
    - Next see if placing the iPod in recovery mode will allow you to restore the iPod. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Last, make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem.

  • Ipod wont turn on and  isnt recognized in itunes

    my ipod wont turn on even if i leave it plugged in all day and night on my computer i tried toggleing the hold button and pressing the menu and middle button at the same time and nothing happens its black still. my ipod isnt being recognized in the itunes either. i deleted the itunes from my computer and downloaded it again a few times but still nothing happens. i even tried on a friends laptop and my ipod still wont turn on even if i leave it plugged in all day and night on my friends laptop and it wont show up in the itunes on their laptop either. can someone give me some helpful advice or will i have to go to a apple store or send it in for repairs? also i have almost had it for ayear at the end of this month does anyone know how much it will cost if i have to send it in for repairs? please help.

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • What do i do if my ipod wont turn on, charge, or connect to itunes

    what do i do if my ipod wont turn on, charge, or connect to itunes

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • IPod wont turn on or update after iTunes 7, please help

    It's a 2004, 20gb iPod with click-wheel. A friend gave it to me, if I can try to repair it. Apparently it died after installing iTunes 7. The iPod wont turn on or respond to anything. The only time it does is when its connected to a computer. At first iTunes reported that the iPod is corrupted and needs to be restarted. And when it turns on, theres an icon with an exclamation mark and an URL pointing me to Apple's support. At first i tried with various older firmware files and I got the messega that there was an error formatting the ipod. iTunes 7 gave a 1418 or 1429 error at the end of the updating process.
    I tried with resetting it, putting it in the disk mode and then erasing and/or partitioning it with Disk utility and it was always the same. I tried unplugging all the other devices when updating, just like recommended. Again nothing worked.
    Here comes the peculiar part:
    Then I did a complete erase, writting zeros over the whole disk in Disk utility. It took ages and then finally stopped with an error just before finishing. After that I can update my iPod just fine with iTunes 7, I can even name it again and start adding songs(it takes forever for just one song). Even older updaters say its fine. But after unplugging it from the computer its still dead and it still displays the error icon. All that got me so confused.
    I find it hard to believe that a hardware error suddenly appeared just after installing iTunes 7 and I am really hoping for any help I could get because I dont want to give up on it just yet. Thanks.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • IPod wont turn on or give any light signal

    I started using my iPod yesterday and it was working fine... Now my ipod wont turn on, it doesnt give any light signal even if its connected to the PC , and unlocked... But its not my PC's problem, cause my friend's ipod works very nice in my PC... So... What's wrong? :S
    Don't tell me the iPod is not ok... :(:(:(
    iPod 30GB   Windows XP  

    Try the steps on this page: http://support.apple.com/kb/HT1808
    If this doesn't work and your still under warranty I would suggest sending it in
    for replacement.
    You said all your music disappeared before connecting to your computer so I don't think the problem is there. The fact that it doesn't turn on at all may just be a symptom of a depleted battery or your iPod simply died.
    Good luck!

  • My ipod wont turn on unless on charge! :(

    my ipod wont turn on anymore.
    i droppped it at the gym and now the only time it works is when it is on charge. i can't even connect it to iturns on my PC:(
    when its connected to the charger i can play a song but as soon as i unplug it it goes off again
    please help
    p.s its a 60g ipod video (if that helps)
    what do i do????????????

    Hold the middle button and the top button for 10 seconds, worked for me Hope I helped

  • My ipod wont turn on also wont charge. Could this possibly be my motherboard? If so, could i get it fixed at what cost?

    My ipod wont turn on also wont charge. Could this possibly be my motherboard? If so, could i get it fixed at what cost?

    Maybe
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    And:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Please help, my ipod wont turn on some1 help

    heii every1 my ipod wont turn on heres wat happend,
    I got the ipod on christmas and transfed over 500 songs and photos. (by the way its the new 30GBvideo) and it was working fine, then my uncle got me the iBlast and it worked good, then i went 2 my friends house and i was raining, it gota lil wet but it was fine. i got 2 my friends house and it froze then i reset it and now it wont turn on, i left it on overnight and it been like a day and i wont turn on its so kool and i want it 2 work somebody please help me
    Thanx, Mike West
    eMachines 3882 1GBRAM, 80GB HD   Windows XP   DVD+/-R/RW, USB 2.0 and 2.80GHz

    Welcome to the discussions.
    iPod Won't Turn On
    JC

Maybe you are looking for

  • Can I buy 1 TB of space for a iMac Core 2 Duo 2.16GHz 2GB 24'' Desktop?

    My brother is looking to buy this computer: iMac Core 2 Duo 2.16GHz 2GB 24'' Desktop Specs are: Item specifics - Apple Desktops Condition: Used Processor Type: Intel Core 2 Duo Product Family: iMac Processor Speed (per Core): 2.16 GHz Screen Size: 24

  • What clips are in my current project?

    I am new to FCP. I have never used an editor that doesn't show me what clips from my bin are currently in my project. I am about to go on the road to edit a video that has hundreds of clips. I need to know if the clip is already in the project or not

  • Cannot find -lpng12

    Hi. Thunar does not work after upgrading libpng and libjpeg so I tried to rebuild thunar myself and it said: /usr/bin/ld: cannot find -lpng12 collect2: ld returned 1 exit status And the build failed.

  • LSMW Direct Input Method RMDATIND tax classification material

    Hi folks, I am loading material master data throught LSMW using direct input method. In MM01 for a particular sales org we have tax classifcation for three different countries US, CA and GB. Could anyone tell me how do I post the tax classification M

  • How to get row index in dynamically populated table?

    Hi, I am following example given in http://balusc.xs4all.nl/srv/dev-jep-dat.html to Dynamically populate datatable. How can I get row index while populating table in populateDynamicDataTable() method private List myList; private String[] headers; //