IPod wont work with iMac but works in Vista

I have an 80GB iPod Classic that works perfect on my computer running Windows Vista and iTunes 7. I have only ever used it with iTunes.
My iPod's format is FAT32 (Windows). And it's running software Version 1.1.2 and disk use is enabled.
When i try and plug it into an iMac (iMac G5) running OS X 10.3.9 it doesn't work. It doesn't come up as an external drive so I can't access it as an external disk and it fails to work in iTunes.
I have upgraded the Mac to the latest version of iTunes but this still doesn't solve the problem. I tunes gives me the following error "iTunes has detected an iPod that appears to be corrupted...". This is not the case, my iPod is not corrupted.
How can i get my iPod to work on the Mac?

If you buy an iPod, you are Apple's customer whether you use Windows or Mac OS X. Therefore, your statement
nice how they screw their own customers.
makes zero sense.
If Apple products work in Windows for an extended period of time, this is because the most common and popular (by far) version of Windows is getting on 8 years old. And since XP is so prevalent, Apple has to support it, just like any other company that makes products that work with Windows. It is highly unlikely that Windows Vista will ever surpass XP in usage; Apple will no doubt continue to support XP with iTunes and iPods when XP is TEN years old.
For Mac OS X, Apple has been pushing the rate of development much faster. Therefore, Panther is already "old" technology, even if it was released after Windows XP. Panther is PowerPC-only and most active Macs (in the installed base) are now Intel-based, with 3 million new Intel Macs being added to the installed base every quarter. ALL Intel Macs use Tiger or Leopard. Most Power PC Mac users with supported hardware have at least upgraded to Tiger, if not Leopard. Therefore, only a small fraction of Mac users still use Panther day to day. SO... Tiger is obviously a good cutoff point for backward support, just as Windows XP is a good cutoff point on the Windows side. It's just common sense, not Apple trying to "screw customers."
It's not just Apple using this common sense. Many, if not most, third party software and hardware Mac products being released right now require Tiger or Leopard, just like with Apple.
As for your actual problem, I would try Restoring the iPod on the Windows side (assuming you have a copy of all the files on the PC). A Mac should be able to read FAT32 format, both in iTunes (using manual management) and as a hard drive using Finder. If you can get this to work, you can copy the iTunes media files onto the iPod as files (not through iTunes) and then transfer them to the Mac as files. Then load them into the Mac's iTunes library.
Continue using your Windows PC to sync the iPod. On the Mac side, use +manual management+ (do not sync).

Similar Messages

  • I had to change my hard drive, now i'v tried to reinstall itunes, it is saying i have to restore my ipod touch to factory settings, will i loose all my films by doing this, as now my ipod wont work anyway unless i restore ?

    I had to change my hard drive, now i'v tried to reinstall itunes it says i have to restore my iopd touch to factory settings and will loose my files. I have a few films on there and they show up on my purchases.If i restore, will i be able to get my films back ? as at the moment my ipod wont work now untill i restore anyway.

    Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your device manually before syncing, you can restore from that backup again. A manual backup does not include the sync process.
    Here's how to:
    Disable autosync in iTunes, connect your ipod to your computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your device for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
    About backups and what's saved:http://support.apple.com/kb/HT1766
    How to back up and restore:http://support.apple.com/kb/HT1414
    Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device
    Message was edited by: Ingo2711

  • Bluetooth ANYCOM FIPO Pairs with iMac but does not connect

    Bluetooth ANYCOM FIPO Pairs with iMac but does not connect. Have paired and connected iMac to Bluetooth Keyboard, Mouse and a Plantronics Headset without issue. I have a Dell Latitude D620 that paired and connected with the ANYCOM FIPO so I know the device works. It is currently plugged into the iDock port in a Bose SoundDock..
    Bluetooth Device Details.
    Devices (Paired, Favorites, etc):
    FIPO:
    Name: FIPO
    Address: 00-07-88-a0-12-ce
    Type: Headset
    Services:
    Paired: Yes
    Favorite: Yes
    Connected: No
    Apple Bluetooth Software Version: 1.9.0f8
    Hardware Settings:
    Computer:
    Address: 00-14-
    Manufacturer: Cambridge Silicon Radio
    Firmware Version: 3.1965 (3.1965)
    Bluetooth Power: On
    Discoverable: Yes
    HCI Version: 3 ($3)
    HCI Revision: 1965 ($7ad)
    LMP Version: 3 ($3)
    LMP Subversion: 1965 ($7ad)
    Device Type (Major): Computer
    Device Type (Complete): Desktop Computer
    Composite Class Of Device: 1057028 ($102104)
    Device Class (Major): 1 ($1)
    Device Class (Minor): 1 ($1)
    Service Class: 129 ($81)
    Requires Authentication: No

    You may have to enter device code like 000 in phone so it can pair up.
    Try checking the box you mentioned
    Check the manual for your Bluetooth device it will tell you the code Read all of it!!!!!
    Try turning on Bluetooth just as phone is put in search mood.

  • My Ipod wont Sync with ITunes! Please Help!

    My Ipod wont Sync with ITunes! Please Help! I have the latest version of Itunes, but my ipod will not sync with my laptop. The diagnostic test has no answers and says everything is normal. When i try to sync, it says "an unknown error occurred (-39)". Any suggestions?

    check for any viruses

  • 2nd Gen Ipod will sync with itunes but will not download new song

    My Ipod will sync with itunes but will not download newly purchased songs.  It is Ipod nano 2nd gen.

    If you want to use automatic syncing, you may need to set up or update the iPod's Music sync settings in iTunes.  If the new songs are not included in what gets synced to the iPod, they will not sync.
    If the sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar.  The iPod appears in the sidebar, under DEVICES.  Select it there, to show its Summary screen to the right.  Toward the top, there is a bar of buttons, starting with Summary.  Click on Music next to Summary.  This Music screen is where you tell iTunes how to sync songs to the iPod.
    Check the box for Sync Music, if not already checked. This is the "switch" to enable automatic syncing for songs.
    NOTE:  If Sync Music is not already checked, that means the iPod is currently set to Manually manage music.  Setting up automatic syncing will replace the iPod existing content.  If you want to add the new songs manually to the iPod (instead of using automatic syncing), please post back.
    If your iTunes library fits on the iPod, you can choose the option to sync Entire music library.  Otherwise, choose the option to sync Selected playlists, artists, albums, and genres.  Below that, select (checkmark) what you want to sync to the iPod from the lists.
    One convenient way to set this up is to first create one or more playlists in your iTunes library, with ALL of the songs you want on the iPod.  Or you can use existing playlists.  Back on the iPod's Music screen in iTunes, select those playlists under Playlists.
    When you click Apply, iTunes syncs the songs in your selection(s) to the iPod (replacing its existing content).  Going forward, to update the iPod, you can just update those playlists in your iTunes library (add/remove songs).  If you have new songs, add them to a playlist that is synced to the iPod.  The iPod does not need to be connected.  The next time you connect the iPod (or click Sync if already connected), iTunes automatically updates your iPod with the same changes.

  • TS1567 my iphone 4 wont sync with itunes, but it will on windows my computer. i have also tried everything apple has suggested on the support

    my iphone 4 wont sync with itunes, but it will on windows my computer. i have also tried everything apple has suggested on the support?

    Device not detected in iTunes for Windows

  • I am travelling for a year. I have my iPod touch 4g with me, but not my MacBook. Is there a way I can update to IOS 5 without losing my music,apps, photos..

    I am travelling for a year. I have my iPod touch 4g with me, but not my MacBook. Is there a way I can update to IOS 5 without losing my music,apps, photos..

    Yes. get a computer with iTune 10.5 and:
    - Transfer iTunes purchases to the computer:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other stuff using a third-party program like one of those discussed here.  Most are good for music.  It is harder to find one for other stuff like synced photos.
    Copy music from Ipod to new computer...: Apple Support Communities
    - Connect the iPod to the computer and make a backup by right-clicking on the iPod under Devices in iTunes and selecting Back Up
    - Restore the iPod from backup and sync as neccessary.

  • I connected my iPod classic to my iMac but it showed iPod could not be read

    I connected my iPod classic to my iMac but it showed iPod could not be read. I would like to ask why did this happened and what can I do about it?
    Thank you.

    You need to restore the iPod to factory settings using iTunes.  Follow these instructions: http://support.apple.com/kb/ht1339
    PS: you are replying correctly.

  • TS1398 how come my ipod wont update with an error saying not connected to internet when it is

    how come my ipod wont update with an error saying not connected to the internet when it is?

    Try disabling the computer's antivirus and firewall during the download and update.

  • My ipod wont work with my ihome anymore plz help

    my ipod sounds fine with the headphones and with other speakers, but as soon as i put it on my ihome it wont work, yet it still will charge on there it just wont play music. plz help!

    do you have the conncetion right..because i have a ipod and iwake so the speakers might of gone bad..i am not sure but try plugging a cd player or something in the back of the ihome

  • Elan Sayso/Tempo Multimedia TTS? - Ipod wont work with itunes

    What does this mean?
    I can put my itunes on fine and I can plug in my ipod nano 16gb...but seperately only. If I have itunes on and plug in my ipod then 'Elan Sayso/Tempo Multimedia TTS Server has stopped working' and I have to shut down itunes as it has froze.
    Ive tried what apple have suggested so itunes has been uninstalled etc and my 3rd generation ipod nano works fine but it just wont work for my 5th generation.
    Please help - also I am not that clever with computers so you may have to dumb it down! Many thanks

    Where would I find any updates?
    No idea since I don't have whatever software you are using but I'd probably start here -> http://www.acapela-group.com/

  • My ipod wont work with this other computer

    my computer that had my ipod music and information on it crshed so i went to go use my ipod on my moms computer. she also has an ipod but doesnt use it much so i uninstalled itunes the re-insatlled it under my information. but every time i plug it in i cant do anything with it but charge it.
    ??how do i update music onto my ipod through this computer??

    You really didn't need to uninstall then reinstall iTunes to get your iPod to work, nor do you need to install the ipod software again.
    What happens when you connect the iPod to iTunes? Is it recognized in the source list? Do you see any messages? Do you have your iPod set to transfer songs manually?

  • Please help me my ipod wont work! D:

    I need serious help D:! ok so i have succesfully synced music onto my ipod b4 but i wanted more songs so i was syncing music onto my ipod touch once again and once the sync was almost finished it said something about an error and then when i unplugged my ipod all of my songs that i had 1st put on my ipod were gone D:! after that my ipod stopped showing up on itunes on one of my computers so i switched to the other and it started doing the same thing. i came on here and was told it might be because itunes wasnt up to date so i updated itunes and my ipod but after the update, during the time when it was backing up software i think, another error popped up and said something about how the session had timed out, my internet connection is fine to so it wasnt that. after that another error popped up saying i needed to restore my ipod back to its factory settings and i said ok but another error always pops up saying the sesion timed out of something! now my ipod is like it was when i first got it! the screen shows the end of a usb cord pointed at the itunes sign! ive tried turning it off but it wont work! and when i try to hook it up to itunes on either off my computers it doesnt show up in itunes and a message from windows pops up and says "Found new hardware: Windows needs to install driver software for your apple mobile device (Recovery mode)" please help me i cant even do anything at all with my ipod right now! D:

    The Internet provider might have too many people using the Internet than what the particular servers are setup for. Or your computer just needs to reset. Try restarting your computer. Also do a hard reset on the iPod. Hold the power button and wake button down until you see the apple logo come on. Let go. Then let the ipod finish bopting up . Then restore your iPod as a new iPod, NOT from the backup.

  • So I tried to downloaded IOS6 and now my ipod wont work.

    Ive tried everything, I tried resetting, restoring, but it wont work! When I tired to restore it said "unknown error occured (3194)". I really need help, I use my ipod for school and really need it fixed, I live over 1hr away from the apple store so its not an option to take it back.
    Thank you so much!

    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694
    You may also try Recovery Mode: (hopefully you have a backup as this will remove data)
    http://support.apple.com/kb/HT1808

  • IPod wont work above 10000 ft

    I was watching the news today and heard a story about iPods not functioning at altitudes over 10000 feet. Being someone who lives in the mountians in colorado where I live and spend most of my time over 10000 ft feel that the warning should have been more readily available. What should I do if my ipod breaks and wont work? Will Apple cover the repairs? Does Microsoft work better at high altitudes?
    Please Help

    While it is true that some Ipods will work well over 10,000 feet, Apple has set that up as one of their specs. There are several reasons that they might have done so. All the components that Apple uses to make up their ipod have operating limits. These may or may not be set up by Apple. For an example and just an example. The maker of the hard drive might have an operational spec of 10,000 feet (not sure what the real range is) and might have only tested to this altitude. They will then post that spec in their docs. Apple then has to decide if they will use that hd. It they do, in order to stay in their contract and warranty range of the hds' they will post that spec. In my experience as an electronic engineer is that in the electronic industry 10,000 ft is pretty much a generic altitude that manufactures give to products that are non aerospace specific.
    So bottom line is that it might very well work to twice that altitude, but it has only been tested to and certified to 10,000 feet. I do know that millions and millions of Ipods are used on small planes all the time and that there are people that live in Co. USA that work and travel in altitudes much higer then 10,000 feet and they work well. I have seen a post from a guy in Co. that has a picture of a G.P.S. and I believe the altitude is in the mid 13,000 ft range and he states it works fine. Remember these are operating specs for optimum performance. Real ranges could be much different. I do know for an example that there is lcd display on the space shuttle that is rated to 400 miles above the earth (how they got that sheesh) but the same display is on a pda that you can buy in just about any store. The screen on that pda (the exact screen) has a service cieling of 10,000 feet. Cost of testing and certification. The manufacture only tested a handful of the screens to extreme altitudes because of the cost. Cost of the screen for the shuttle, 1500 dollars. Cost of entire pda 250dollars. Hope this helps.

Maybe you are looking for

  • In Premiere CS5, I opened an old project I had edited using Premiere CS3 and now its all pixelated!

    Hi everyone. I just got Premiere Pro CS5 and started the program and opened up an old project I had edited using Premiere Pro CS3. Premiere Pro CS5 said it had to convert the project for editing in CS5. I clicked "okay" and the project opened up in C

  • IF I reset my nano will I lose my music

    My nano was dowlnloading fine it was in iTunes then it went away how do i get it to come back so I can finish downloading

  • Change batch in LT12 (TO Confirmation)

    Hi, I am working in ECC6. I want to change the batch in transfer line item in LT12 before confirmation. Tried finding userexit or BADI or function module but no luck. Can anyone help? Thanks in advance. Shoma

  • How to restore an Air?

    The hard drive in our MacBook Air has died.   I intend to buy a new hard drive.  Right now I am looking at the stock at iFixit.  I anticipate that the new SSD will be blank.  It will not have an OS on it.   I have the old hard drive backed up to an e

  • How to program in java

    hey guys. i am an undergraduate student. graduating next spring 2007. i did all my programming languages which were required in my course in 2004 and since that i have not taken any programming classes. i got my internship as a database administrator