Ipod working on one machine but not another

I purchased a 30gb iPod video today, the problem is after I installed iTunes and plugged the iPod in I got an error message stating my ipod was possibly corrupted and suggesting that I restore it. When I try to restore it says this isnt possible because it can't download the required rescoure. The odd thing is when I plug it into another, much older computer in my house, it works fine. I've looked over a lot of the topics on this forum and can't find anything that has worked yet. Both machines are running Windows XP and iTunes 7, however the older machine has usp 1.0 ports yet it still worked. Any help would be much appreciated, thanks.

Not sure, maybe if you can share the form, I can have a look at it.

Similar Messages

Implicit read with assembly module instance working on one computer, but not another

Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?

I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related?

Ipod works on one computer but not the other?

Can someone please help me? My ipod works on my laptop but not the desktop. When I plug the Ipod into the desktop it sometimes shows up in Itunes but says it's corrupt. Which it obviously isn't because it works fine on it's own when not plugged into a computer and it works fine when I plug it into the laptop. Also when I looked in my computer the Ipod would show up as drive j and it would flash on and off. Well, I tried plugging the Ipod into a different port and that worked as far as drive j stopped flashing on and off. I tried changing the drive name and it wouldn't let me because it always went back to drive j even after I changed it to drive z. Itunes is playing music and is up to date. I have Windows Vista Home Premium 64 bit. Please help.

Well start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Patrick

Home sharing works with one account but not another?

My family has an apple tv, we've been having problems setting up the home sharing and tried everything. We eventually decided to try my brother's apple id instead of my mother's and it worked. So my question is; why does home sharing not work with one id but works with the other? any suggestions to get it to work with my mother's id?

Try resetting the Apple TV. enter your mother's ID again. Then remove her ID on iTunes and re-add it. Then see if it works this time.

Jabber 4.4 "Graphics card or driver not supported" error on one machine but not another.

Hi, I looked at the KB document but the email link on it no longer works.
I have two end-users using Jabber 4.4 on identical machines, same specs, same driver build and OS image. One gets the "Graphics card or driver not supported" error, the other does not.
We have two DellOptiPlex 7010's,
Both had 2 instances of AMD Radeon HD 7470 - they are dual monitor machines.
In both cases the driver version 8.922.0.0, Driver Date 12/6/2011. This is the latest Dell has on their website.
On one machine when I run a fresh install for Jabber for TelePresence 4.4 it works fine. But on another the user first gets
"supportabilitytest.exe has stopped working
A oriblem cause the program to stop working correctly. Please close the program."
Then when that's closed out we get:
"Graphics card or driver not supported!
New features in this version of Jabber Video are not supported by your computer's graphics driver.
Update to the newest graphics driver available and run Jabber Video again."
I can't believe it's just a matter of upgrading the drivers because in this case one machine with identical drivers works.
I appreciate any insights, thanks !

Hi ksouthall,
It sounds like the openGL supported version did not install on the one that is failing. There isn't much we can do regarding that error. Best practice is to always upgrade to the latest manufacturer's available driver. Client requirements are below.
Windows 7 (32-bit or 64-bit), Vista, or XP (SP 2 or newer), with OpenGL 1.2 or newer.
For 720p HD video calls, Intel Core2Duo @ 1.2GHz or better.
For VGA video calls, Intel Atom @ 1.6GHz or better.
Webcam, built-in or external. You need an HD webcam if you want other callers to see you in HD.
Broadband Internet connection with a recommended bandwidth of 768kbps upstream and downstream. You need about 1.2Mbps upstream and downstream for 720p HD video calls.
Regards,
Jason

IPod recognized by one Mac but not another

I have a fourth-generation iPod. My home computer, which has stopped recognizing my iPod, is a PowerPC G4 running 10.4.11. My work computer, which does recognize the iPod, is a 20-inch iMac (whose specs I don't recall). All software is up to date on both Macs, and I've tried resetting my iPod as well as putting it into Disk Mode to try to fix the problem at home. No dice.
The only thing I can think of that might have affected it is my recent problem with my home Mac's sleep function -- that being, simply, that my Mac doesn't go to sleep when I select it from the pull-down menu.
Could I have affected the iPod by putting my Mac to sleep while it was attached? I've done it many times before without any problems. Or, is there an improper way to wake up the Mac while it is sleeping? Could the iPod be thinking that my Mac is still asleep?
I've also noticed that my home Mac takes longer to boot up and shut down since these problems (iPod, sleep function) developed.
But, again, the iPod works fine with my work Mac.
Needless to say, I am flummoxed. Thanks much for any insight!

Do you use FireWire or USB to connect the iPod?
If USB, try disconnecting ALL of your peripheral devices including any hubs, except for a standard keyboard and mouse. Try the iPod connected directly to the Mac's USB port. Be sure to try more than one port.
If FireWire, make sure it is connected directly to the Mac's port instead of daisy chained to an external drive or connected to a FireWire hub. Try it on more than one port, since it is possible the port has become faulty. If you have another FireWire device, use it to make sure the port is OK.
If the Mac itself is running oddly, you need to start up from your Mac OS X installation disc (for the OS version you are using), and run Disk Utility from Installer's menu. Then run +Repair Disk+. If that completes with no errors or errors that are repaired, restart normally. Then run Disk Utility and use +Repair Disk Permissions+. Hopefully, those actions will fix the Mac.

Safari works for one user but not another on same computer

MacBook with multiple user accounts. Safari (and Firefox) work fine for one user but are unable to open web pages when the other user is logged in. The error in Safar is "Safari can't open the page "http://xxxxxxxxx/" because it could not connect to the server "/xxxxxxx/" . DNS is working for this user. I am able to ping any number of sites from Terminal. Network Preference pane is configured to not require any proxy. This is a case of it was working but now it's not.
Can anybody help with this? I know I can fix this by simply creating another user and transfering the affected user's data to the new account but I would rather not. TIA

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

Identical actionscript works in one frame but not another...?

Hi all,
I'm working on this electronic sheep creator for my Masters
degree (don't ask haha..) which is online at
[url]www.aegreen.co.uk/creativetech/[/url] . The problem I'm having
is that a piece of actionscript I'm using for saving the sheep as a
jpg using BitmapData works in one frame with one movie clip but not
in another frame..
In frame 1 I create two movie clips - mc_modifysheep and
mc_dna:
[CODE]on(release) {
_root.createEmptyMovieClip("mc_modifysheep", 1)
mc_modifysheep._x = 150;
mc_modifysheep._y = 70;
mc_modifysheep.attachMovie("sheep_body", "body", 1, {_x:42,
_y:65});
mc_modifysheep.attachMovie("sheep_head", "head", 2, {_x:0,
_y:0});
mc_modifysheep.attachMovie("sheep_legs", "legs", 3, {_x:77,
_y:215});
_global.bodycolour = "default";
_global.headcolour = "default";
_global.legscolour = "default";
_root.createEmptyMovieClip("mc_dna", 2)
mc_dna._x = 0;
mc_dna._y = 0;
mc_dna.attachMovie("mc_DNA_empty", "DNA empty", 1, {_x:8,
_y:360});
mc_dna.attachMovie("mc_dna_default_default_top", "top", 2,
{_x:45, _y:374});
mc_dna.attachMovie("mc_dna_default_default_right", "right",
3, {_x:65, _y:400});
mc_dna.attachMovie("mc_dna_default_default_left", "left", 4,
{_x:32, _y:401});
gotoandstop(2);
}[/CODE]
the sheep in 'mc_modifysheep' and the dna in 'mc_dna' are
built up over frames 2 and 3 and then in frame 4 the user decides
whether the sheep is given freedom or captivity. If freedom is
chosen then the user is prompted to name their sheep and the movie
clip mc_modifysheep is saved as a jpg on the server using
BitmapData and PHP. If captivity is chosen then the user is
prompted to name the dna and the movie clip mc_dna is meant to be
saved as a jpg on the server but only a white blank jpg is
produced, not what is contained in mc_dna.. I've tried all sorts
but I can't figure out why it's doing this..
Here's the code I'm using, that works, to save the
mc_modifysheep:
[CODE]import flash.display.BitmapData;
btn_freedom.onPress = function() {
freedom();
function freedom() {
snap_sheep = new BitmapData(305, 290);
snap_sheep.draw(mc_modifysheep);
var pixels:Array = new Array();
var w:Number = snap_sheep.width;
var h:Number = snap_sheep.height;
var a:Number = 0;
var sn:String = txt_Freedom.text;
high = 99999;
low = 00000;
ran =
Math.floor(Math.random()*(Number(high)+1-Number(low)))+Number(low);
var rn:Number = ran
var filename:String = dn+sn;
for (var a = 0; a <= w; a++) {
for (var b = 0; b <= h; b++) {
var tmp = snap_sheep.getPixel(a, b).toString(16);
pixels.push(tmp);
var freedomoutput:LoadVars = new LoadVars();
freedomoutput.img = pixels.toString();
freedomoutput.height = h;
freedomoutput.width = w;
freedomoutput.filename_sheep = filename;
freedomoutput.send("save_sheep.php", "_self", "POST");
stop();[/CODE]
and here's the near identical code apart from different
variable/movieclip names I'm using to try and save (but failing)
mc_dna:
[CODE]import flash.display.BitmapData;
btn_capt.onPress = function() {
capt();
function capt() {
snap_dna = new BitmapData(305, 290);
snap_dna.draw(mc_dna);
var pixels:Array = new Array();
var w:Number = snap_dna.width;
var h:Number = snap_dna.height;
var a:Number = 0;
var dn:String = txt_Capt.text;
high = 99999;
low = 00000;
ran =
Math.floor(Math.random()*(Number(high)+1-Number(low)))+Number(low);
var rn:Number = ran
var filename:String = dn+rn;
for (var a = 0; a <= w; a++) {
for (var b = 0; b <= h; b++) {
var tmp = snap_dna.getPixel(a, b).toString(16);
pixels.push(tmp);
var captoutput:LoadVars = new LoadVars();
captoutput.img = pixels.toString();
captoutput.height = h;
captoutput.width = w;
captoutput.filename_dna = filename;
captoutput.send("save_dna.php", "_self", "POST");
stop();[/CODE]
I know it's a problem with the flash and not the PHP as I've
tested for that, definately in the flash. I just don't understand
how the same code can capture mc_modifysheep, but not mc_dna.
argh!!!
If you need to take a look at the FLA file it's up at
[url]www.aegreen.co.uk/creativetech/dohumansdream.fla[/url]
Thanks everyone!!

If you dont find anything specific, a lot of the problems i
encounter like this are because one little thing is spelled wrong.
like it doesnt match whats in your php file, ect. my suggestion,
though a long one, if you know its supposed to work, and theres no
syntax error, re type it, not copy and paste, and just be careful.
keep tripple checking. you might not even find what was spelled
wrong, but it might fix the situation,

Downloading a file via a procedure works in one app but not another

Obviously I've overlooked something. I have this procedure (following). It works in one application that has been running for a couple years. It is called from Column Link with this value #OWNER#.DOWNLOAD_ATTACHED_FILES?p_file=#DOWNLOAD_LINK#
I'm now making a new application and want the same facility but this same procedure gives me a page not found error even though the error page URL looks like: .../apex/GMCTRL.DOWNLOAD_ATTACHED_FILES?p_file=42 which seems to me that it should work correctly. (the row with the value 42 does exist in the DB)
Is there a setting/flag/thing that I have to set to make this work in my new application that I've overlooked? (both are APEX 3.1.1 and oracle 11g)
create or replace PROCEDURE "DOWNLOAD_ATTACHED_FILES" (p_file in number) AS
v_mime VARCHAR2(48);
v_length NUMBER;
v_file_name VARCHAR2(2000);
Lob_loc BLOB;
BEGIN
SELECT MIME_TYPE, RPT_DOCUMENT_BLOB_IMG, RPT_DOCUMENT_FILE_NAME_TX, DBMS_LOB.GETLENGTH(RPT_DOCUMENT_BLOB_IMG)
INTO v_mime, lob_loc,v_file_name,v_length
FROM RPT_DOCUMENT_BLOB
WHERE RPT_DOCUMENT_BLOB_ID = p_file;
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
htp.p('Content-length: ' || v_length);
htp.p('Content-Disposition: attachment; filename="'||substr(v_file_name,instr(v_file_name,'/')+1)|| '"');
owa_util.http_header_close;
wpg_docload.download_file( Lob_loc );
end download_attached_files;

Hello:
Ensure that
GMCTRL.DOWNLOAD_ATTACHED_FILES is executable by oracle account used by APEX to connect to the database (apex_public_user or anonymous)
GMCTRL.DOWNLOAD_ATTACHED_FILES is included into 'WWV_FLOW_EPG_INCLUDE_MOD_LOCAL' as an authorized procedure. See Re: link can't find a stored procedure
Varad

WDTHEMEROOT works in one client but not another

I'm looking at using the WDTHEMEROOT application parameter to set a theme. I've set it to 'sap-chrome' in our development client and that works fine when I test the application. When I log into another client on the same system, however, the WDTHEMEROOT parameter has no effect. I'm guessing there is a setting in the first client but not in the second but I don't know what that might be. Any ideas ?
thanks,
Malcolm.

Well,
I guess my excitement was shortlived. I changed the theme and did whatever the note suggested. It worked!
But then I changed it back to 'sap_chrome' and did all that the note suggested - it did not work. I am now stuck with the new incomplete theme and am not able to change it back to what it was earlier.
Any Help?
Thanks,
Sanjiv

Apps work in one location but not another

Some apps (iheartradio and tvguide) work fine from my home wifi, but not in another wifi area (at work, which has better wifi). Other apps such as pandora work fine at both locations. What is the difference and how can I get all apps to work everywhere?

It's entirely possible that your employer has blocked certain ports on the corporate firewall, which will prevent some apps from working.

Flash not working for one user, but not another on this CPU

Hi,
For user A on my computer most video will play in Safari, Firefox, and Chrome. But video at nfl.com will not play. The ads will play but not the actual feature.
I just found out that the videos on nfl.com will work for user B. I have rerun the Adobe Flash 10.1 installer in user A's account several times with no luck.
Are there permissions or libraries I should trash to try to restore this capability?
thanks,
Steve

HI,
For user A on my computer
Try uninstalling the current copy of Flash, reinstall new, then repair permissions.
Uninstall Flash
Install the most recent version of Flash here.
Now repair permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
You may also need to delete the Flash cache. Instructions here.
http://discussions.apple.com/thread.jspa?messageID=11672709&#11672709
If that doesn't help, install the v10.6.4 Combo Update It's ok to do this even though you are already running v10.6.4.
Carolyn

Script works for one frame but not another

I set up 2 keyframes, each one loads a different text file
into a dynamic text box. The text box for the first keyframe is
named "session" and the text box for the second keyframe is named
"oneptq". The text file for the first text box is named Titles.txt
and the text file for the second keyframe is 100Q.txt. The code I'm
using is identical (except for the respective names of the text
boxes and text files) but for some reason the text will load in the
first text box but not the second.
Here's my AS for the first keyframe:
lvLoader = new LoadVars();
lvLoader.onLoad = function(success)
if(success)
session.text = lvLoader.textbody;
lvLoader.load("Titles.txt");
And my AS for the second keyframe:
lvLoader = new LoadVars();
lvLoader.onLoad = function(success)
if(success)
oneptq.text = lvLoader.textbody;
lvLoader.load("100Q.txt");
I can't figure this thing out. Please help. Thanks.

Have you double checked that it's a DYNAMIC text box? Maybe
it was accidentally swapped by to static at some point...

Synaptics touchpad on 4540s works for one person but not another

The Synaptics touchpad on my ProBook 4540s (Win 7) works normally when I use it but when my wife tries to use it, the touchpad is unresponsive after a very slight initial cursor movement.  (Anticipating replies - Yes, she casts a shadow, pictures of her come out normally, and she has a visible reflection in a mirror.)     The touchpad sensitivity setting is maxed on light touch and cursor speed is maxed.
She has relatively small hands, and long nails, but she had no difficulty using the touchpad on our old HP dv9910us and has no problem with an iPad touchscreen.  This week she tried the touchpad on a Sony VAIO that was so worn most of the original surface coating is gone, and had no problem moving the cursor on that machine either.   She even tried the awkward solution of using her knuckle instead of her fingertip on the HP in case her nails were getting in the way, but that didn't work either.
Not having used a 4540s before, and not having access to another one to compare, I have no way to tell whether this is a bad individual touchpad unit or a design issue.   If a design issue, what's the workaround?     For instance, is there a skin I can put on the touchpad to increase its conductivity?

A friend of mine bought a ProBook 4540s yesterday. At Microcenter we noticed that the touch pad often would stop working for her, and sometimes for me, but it usually worked for me. She bought the laptop, and we she got it home we noticed the same problem. I played with the touchpad a little and noticed this pad has a very narrow window of operation. With the 14.1" HP's like the nc6220 or nc6400, you can use one finger, two fingers, even three fingers, and the mouse responds nicely. However if too much surface area is in contact with the touchpad of the 4540s it doesn't work. Too much surface area is the pad of your finger. Because my friend has long nails, she was laying her finger pretty flat on the touch pad, and it wouldn't work. When I used the pad like this it wouldn't work for me either. Because I have short finger nails I have always used the lower end of my tip. This works pretty well with the 4540s. Pressure seems to have little affect. It is a matter of surface area, and the acceptable area has a small range!

Why does iPhoto 8.1.2 work on one iMac but not another when both are the same spec both running Mavericks 10.9.1?

I have a studio of 7 iMacs all running Mavericks 10.9.1, six of the machines are able to open iPhoto 8.2.1 but for some reason after updating the seventh, iPhoto vanished completely from that machine. I reinstalled it from a copy I had saved on a HDD but it now says it's unsupported with this version of OSX. I don't want to pay the £10 + for a piece of software that is only being used to import photos from the occasional iPhone so wont be installing the new version, especially as I know 8.2.1 does work on Mavericks.
Any suggestions?
Many thanks

Reinstall v8 from the install disk as, at a guess, the version of the HDD is missing components.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Ipod working on one machine but not another

Similar Messages

Maybe you are looking for