Ipod works with USB 1.1, but not USB 2.0 (30GIG)

Has anyone had this issue? I plug my 30GIG iPod into a USB 2.0, and it says updating, do not disconnect for what seems like an eternity. Eventually, it pops up saying the ipod appears to be corrupted, restore to factory settings? I respond ok, and then it fails to restore. Tried multiple USB 2.0's, same thing.
Next, I pluged into my USB 1.1, and it pops up itunes (latest version) almost immediately, and shows the ipod, and allows me to xfer tunes immediately.
Any thoughts?
Thanks

I'm having a similar problem. I've tried reinstalling USB2.0 drivers, iTunes, iPod but cannot get it to work. It just shows up in the device manager as 'USB Mass storage device' with an exclaimation mark next to it. I've tried to update the drivers for the 'USB MAss storage device', however it just says that I've already got the most updated drivers for the device. I've succumbed to the 1.1 for now, but would really appreciate it if someone could shed some light on this situation!

Similar Messages

My Xbox Bluetooth headset works with my iPhone 4,but not my iPhone 4s,help please!?, My Xbox Bluetooth headset works with my iPhone 4,but not my iPhone 4s,help please!?

Please help,my Xbox headset works with my iPhone 4,but not my 4s,any ideas why?

make sure you disconnect it from 1 before trying to connect it with the other or it will fail

Nothing will print. My printer works with every other program, but not this one!

Nothing will print. My printer works with every other program, but not this one!

I see the printer, in blue when I click on the hardware tab. Actually there are 2 things listed that have to do with the printer.
The first one is called:
HP Photosmart Prem C410 series (DOT4PRIN.... and under the Type it is listed as IEEE1284.4...
The next is listed as:
HP Phototsmart Prem C410 series and under the Type heading it says Printers.
I don't know which one to pick. So when I choose the name highlighted in blue, what do I do to change the name?

IPod nano works with USB 1.1 but not USB 2.0

Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

I have a similar problem with the following configuration:
- Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
- PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
What works well?
- All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
- iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
- iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
What doesn't works?
My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
- Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
- iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
- iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
Help!!!!!!!!!!!!!!!!

My flashdrive only works on one of the usb port. the other usb works with my iphone charger, but not my usb. any suggestions? should i take it in? its a brand new laptop.

My flashdrive only works on one of the usb port. it will not work on the other usb port. however, the other usb works with my iphone charger.
any suggestions? should i take it in? its a brand new laptop.

Reset the SMC and PRAM
SMC Reset:
Shut down the MacBook Pro.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
PRAM:
Shut down the MacBook Pro.
Locate the following keys on the keyboard: Command, Option, P, and R.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

IPOD works fine on other computers but not on mine (insists on "restore")

Appreciate any help or guru advice. Switched to WIN XP Pro. Reinstalled iTunes 7.0.2.16. iTunes works fine on my desktop. When I went to sync my iPod, it said "iTunes detected a iPod in recovery mode" and insisted I do a "restore" on it, so I did, of course erasing all music from my iPod. But my computer still gives me same error message. I connected iPod to other computers in the house, and it works fine, and can load and play music fine. Any thoughts? Can I remove iTunes from my computer, and reinstall, and save ALL my music currently stored (whether purchased, ripped, imported, whatever?) What should I do? Help!! and Thank you immensely.

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

Memory Stick works with G4 and G3 but not G5 iMac

I have a memory stick that connects correctly with a G3 iBook and G4 iMac but not a G5 iMac. When plugged into a G5 USB port, the memory stick appears on the desktop but not the Finder. Doubleclicking on the desktop icon generates a Finder window in which the memory stick appears in the second column from the left along with the other icons in the top half of the leftmost column. Clicking on the icon for the memory stick in that Finder window fails to open it. The File menu has a item for ejecting the memory stick, but ejection does not result. I have also tried without success to drag the icon to the trash. So I just physically remove it, which produces a message saying the device was not properly removed.
Any ideas for enabling this memory stick (which has admittedly been through the wars) to work with the G5 iMac? Thanks

Thanks for the suggestions, Charles.
The G5 keyboard is Bluetooth so I've been plugging the memory stick into the back of the machine.
I've repaired permissions on the G5. I tried to repair the memory stick in Disk Utility but elicited only the spinning beachball. As I was typing this I realized I hadn't tried repairing the disk (i.e., the memory stick) on another computer. I did, and after a few seconds the screen said no repairs necessary.
The memory stick did eject the first time I plugged into the G5 after that. But the other problems remained. And then when I plugged it back in, it no longer ejected electronically. So I'm back where I was.

S-Video adapter and analog TV works with OSX 10.5 but not Boot Camp 2.1(XP)

I bought a mini-DVI to S-video or composite adapter to use with an older analog TV. Works great with OSX 10.5 no problems. However, I currently have Windows XP running with Boot Camp 2.1 and it wont work with the TV. If I ever get an image it's three black and white fuzzy and distorted iterations of the monitor.
Since it works with OSX but not with XP i'm thinking its some sort of boot camp issue and not a problem with the hardware or adapter. Therefore, it should be solvable, right? Does anybody know how to fix this? Will upgrading to snow leopard and boot camp 3.1 solve it?

Perform a custom install from the Mac OS X 10.5 disks and install only that component if possible; if not, use Pacifist to install it. In either case, rerun the combo updater for your Mac OS X version afterwards.
(38032)

Macbook (White 2010) works with 5GB of RAM but not 8GB

I bought 2 x 4gb modules the other day. I tried to install them both on my macbook which although supposedly supports 4 gb of ram but others have proven it will support up to 8gb. I installed them then booted up my Mac but it would not start it merely kept beeping.
However when i used one of the modules with one of the previous modules i.e 5gb in total, my computer turned on and is working. Why don't both of the modules work together? How come I am unable to get 8gb of RAM but I am able to get 5gb? Both modules work when i use them with a 1gb module, but they don't work together. Any Advice?

Yeah the 4gb is being recognised, my mac is running off the 5 gb in total. True, but i've seen videos where people have the exact same mac as me and have 8gb RAM. But yeah thanks for your help guys

JSF webapp works with Java 1.4, but not Java EE 5

Hello
I am having a really weird problem with internationalizing my JavaServer Faces web application.
I am using Netbeans 6.0, Tomcat 6.0.10, JSF 1.2, and JTSL 1.1....
If I use Java 1.4 to run the webapp, everything works fine!
If I use Java EE 5 then it fails to execute internationalization of my choosen locale.
I could just use Java 1.4 and have my site working fine, but I would really like to use Java EE 5 since it can do more. Also I don't see why it can work on one version of Java but not another. My locales are English (en) and Korean (ko).
This is my index.jsp
<%--
    Document   : index
    Created on : 2/05/2008, 01:33:01
    Author     : Steve
--%>
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<%@taglib prefix="c" uri="http://java.sun.com/jstl/core"%>
<html>
    <f:view locale="#{localeBean.language}">
        <f:loadBundle basename="resources.messages" var="msg"/>
        <head>
            <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
            <title>JSP Page</title>
        </head>
        <body>
            <h2>Hello <h:outputText value="#{localeBean.country}"/>!</h2>
            <br>
            <h4><h:outputText value="#{msg.language}"/>:</h4>
            <h:form id="languageForm">
                <h:selectOneMenu   onchange="this.form.submit();" valueChangeListener="#{localeBean.dropdown1_processValueChange}">
                    <f:selectItem itemLabel="English" itemValue="en"/>
                    <f:selectItem itemLabel="��" itemValue="ko"/>
                </h:selectOneMenu>
            </h:form>
            <h:outputText value="#{localeBean.language}"/>
        </body>
    </f:view>
</html>This is my localeBean which is under the package "resources"
* To change this template, choose Tools | Templates
* and open the template in the editor.
package resources;
* @author Steve
import java.util.Locale;
import javax.faces.event.ValueChangeEvent;
public class localeBean {
    private String language = Locale.getDefault().getLanguage();
    private String country = Locale.getDefault().getCountry();
    public String getLanguage() {
        return language;
    public void setLanguage(String newValue) {
        language = newValue;
    public String getCountry() {
        return country;
    public void setCountry(String newValue) {
        country = newValue;
    public void dropdown1_processValueChange(ValueChangeEvent vce) {
        setLanguage((String) vce.getNewValue());
}This is my faces-config file
<?xml version='1.0' encoding='UTF-8'?>

<faces-config version="1.2"
    xmlns="http://java.sun.com/xml/ns/javaee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd">
<application>
        <locale-config>
            <default-locale>en</default-locale>
            <supported-locale>en</supported-locale>
            <supported-locale>ko</supported-locale>
        </locale-config>
        <message-bundle> resources.messages </message-bundle>
    </application>
    <managed-bean>
        <managed-bean-name>localeBean</managed-bean-name>
        <managed-bean-class>resources.localeBean</managed-bean-class>
        <managed-bean-scope>session</managed-bean-scope>
    </managed-bean>
</faces-config>and lastly I have my message bundle under the "resources" package which is named "messages".
This has a key word "language" which is "Language" in the 'en' locale file and "��" in the 'ko' locale file.
Once again when using Java 1.4 this project runs fine, however with Java EE 5 it does not.
You may notice in my index.jsp that I have <h:outputText value="#{localeBean.language}"/>
I use this to display the locale that has been chosen by my select box. Even when this shows a different language has been chosen the page does still not display in the correct language. According to <f:view locale="#{localeBean.language}"> then the locale of the page should be changed.
I have looked over the web quite far for an answer to this problem. But everyone else seems to be using a similar method of loading up a message bundle and using it the same way I am. However my method does not work.
Any suggestions or clues to what is going wrong would be really appreciated.
Thanks in advance^^

it seems that the
<f:view locale="en">
only work if a ressource bundle with the locale sufix '_en' is provided.
Everything works now if I provide 3 ressouce files:
global_en.properties
global_de.properties
global.properties
global.properties and global_en.properties are identically!
But if I delete the global_en.properties file always the global_de.properties file wins before the default properties.
I did not expect such a behavior :-(

Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices? recent problem starting March 1, 2015.

I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise. As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600.
On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's. Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date! but sadly stays on LTE.
Have tried resetting, replugging etc...
Also, tried checking on updates. Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
A mystery...

Reset the TC to factory and redo the setup. see details below.
Here is the typical list of things you should try.. and if this doesn't help post again.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
How is the TC connected into the network? What function does it have? Router or bridge for example.
Post a few screenshots of the setup.

How to open .snp files with Microsoft Office 2007 installed? It works with MS Office 2003 but not with MS Office 2007!

I have MS Office Pro Plus 2007 installed on my computer. I also have MS Office 2003 installed on another computer. Snapshot viewer is installed on both. My work snapshot files works with MS Office Access 2003 but not recognized by MS Office Access 2007. It would not allow me to save them either! Is it a problem with FireFox (3.6.8)? However, I do not have problem opening them up using IE7/8 on both computers. Any ideas? Thanks.

Are you clicking a download link from an email message on an OWA or webmail site? Do you get the open/save dialog for the .snp files? In that case, you should be able to associate them with the Snapshot viewer. If Firefox does not remember this and you have to do it each time, it usually indicates that the server is not sending a specific content type, just the generic "this is some binary content" content type.

I movies work with sound in quicktime but not in imovie hd!!!

I have clips that worked in imovie hd before but all of a sudden the sound will not work, but they will work in quicktime....any ideas?

Welcome to iMovie Discussions.
Some clips - which started life not as DV camcorder clips, but might be .AVI, or somesuch, downloaded from the web, or shot as movies with a digital stills camera - may have audio in QuickTime but not in iMovie.
QuickTime understands and replays many different file formats (..see all the different file formats QuickTime Player can handle, in the right-hand column here..) ..some of which iMovie can't handle.
If your clips "..worked in imovie hd before but all of a sudden the sound will not work.." it might be because you'd had QuickTime open in the background, previously, or because you'd altered them in some way ..or maybe you 'Extracted' their audio, but don't have the check-boxes ticked for the audio tracks at the right-hand edge of the Timeline.
The most important question is: were these clips originally from a tape-based DV camcorder, or did you import them from something else, e.g; web, hard disc camcorder, DVD camcorder, .AVI or other iMovie-incompatible origins?

Class loading works with jre1.3.1 but not with jre1.4.0

Hello,
My JWS application use the following line to create an XMLReader:
XMLReader rdr = XMLReaderFactory.createXMLReader( "org.apache.xerces.parsers.SAXParser" );
Everything works fine with jre1.3.1, but with jre1.4.0 or jre1.4.1 I experience a very strange behaviour:
1) When my application is downloaded and executed for the first time, everthing works fine.
2) When I quit the application and I launch it again, an Exception is thrown (the system in unable to load the Class org.apache.xerces.parsers.SAXParser).
3) If I tell JWS to show the console, everthing works fine again. If I tell JWS not to show the console, the Class can't be loaded anymore.
Any idea ?

Hi.
I have also been experiencing problems in using Java Web Start for my application. When i tried certain functions of my application like saving and updating, I will faced this problem:
javax.xml.soap.SOAPException: Unable to create SOAP connection factory: Provider com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnectionFactory not found
In the previous email in the forum, it was said that this problem was overcame, but I do not really know to how apply the solution given below:
/* The following code is not used for now because
* the code in createXMLReader() which dynamically
* allocates the class does not work the with
* Web Start class loader.
* This can be used again once Sun starts shipping
* Xerces 2.x with the JRE. They have already changed
* the XML development pack to use Xerces 2.x instead
* of Crimson, but as of 1.4.1, they are not updating
* the JRE distribution.
//String className = System.getProperty("org.xml.sax.parser");
//if (className == null) className = "org.apache.xerces.parsers.SAXParser";
//try {
//     tParser = XMLReaderFactory.createXMLReader(className);
//} catch (SAXException e) {
//     tParser = XMLReaderFactory.createXMLReader();
XMLReader tParser = new org.apache.xerces.parsers.SAXParser()
Can anyone enlighten me on how to overcome the SOAP Factory problem? Thank you.

HT204406 iTunes Match worked with 11.0.1, but not with 11.0.2

Just as the title states, Match is not working with 11.0.2. It was however working with the 11.0.1 version of iTunes. It ried turning Match off and on as the help suggested, but now Match won't turn back on at all.

You're using the ProPhoto RGB color space for your documents, right?
There's a known bug (Adobe would like to call it "inaccuracy") in the color-management logic in Photoshop when said logic is run in the GPU, which is the case with Normal and Advanced GPU modes. As far as I have seen, it appears only with the ProPhoto RGB document color profile.
I reported this back in the time of Photoshop CS5. They have not yet seen fit to fix it.
http://forums.adobe.com/message/3472800
http://forums.adobe.com/message/4646490
Your possible workarounds include:
Switching the Graphics Processor Advanced Mode to Basic, which moves the color-management logic to the CPU from the GPU. That produces a more accurate result.
Using a color profile other than ProPhoto RGB for your black and white work.
-Noel

WebDAV working with one page grop but not with another

Hi,
I have a problem - untill last week WebDAV worked ok (more or less).
now, it works with Shared page group and with a recently added pg, however it does not work anymore with the main page group.
Ay ideas?

Hi John,
what I meant was that initially the main page group would be displayed in a window, but after I try to access (or after a simple refresh) it would dissapear. No problems withh Shared and a new page group though.
BTW, more or less means that a colleague had a problems transfering large amount of data via WebDAV. It left a huge transfer overnight and after taht he porblems started. First, the WebDAV worked occasionaly and then completely died for that particular page group.
I am puzzled here why it works for some and not for the others.
BTW, when I try to map a network drive for http://server/dav_portal/portal/ at different computer now, it would come up wih an error saying "the network path ... could not be found". The path does work when copied into the browser's address bar (however the main page group still unaccessable).
Cheers.

Ipod works with USB 1.1, but not USB 2.0 (30GIG)

Similar Messages

Maybe you are looking for