Ipod5 went dead , then i bought a new charger and its still not turning on ... it was working perfectly fine. i had it since may
ipod5 went dead , then i bought a new charger and its still not turning on ... it was working perfectly fine. i had it since may
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
i really need help solving this kind of problem because i love my phone pleace help me
iOS devices cannot play every format that can be played on other devices. You can convert unsupported formats to a supported format for import to your iOS device.
Here's one solution to use if you're ripping DVDs:
http://www.ipadvideoconverter.com/
Here's a little guide on the use of periods at the ends of sentences:
http://en.wikipedia.org/wiki/Full_stop -
I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?
I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
I just bought a new charger and it charges perfectly but itunes wont recognize it what can i do i tried almost everything
nbar wrote:
See other thread, Csound. Sorry. Let's deal with the problem at hand.
Ayala, see Csounds hypothetical questions and answer them to the best you can. Also see my post above, again. Reply.
I'll leave it in your capable hands, I don't need the 'hypothetical' questions answered thanks. -
My IPad want charge I've bought a new charger and use difference outlets but it still want charge.
My IPad is getting hard to charge,I have to wiggly the charger to get it to charge. I've bought a new charger and used difference outlets. I need to know what is wrong?
Consider where you are wriggling the charger (I suspect you mean the cable. Why does everybody refer to a cable as "the charger"?) and make sure all the contacts there are free from pocket fluff and such.
-
I was updating google translate on my phone then the screen just black out. I thought battery went flat but after I put on charge, it's still not working. Please help!
Hello 74birdy
The article below will assist with troubleshooting your iPhone not responding.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes
Best route here is to uninstall iTunes completely using the Windows Control Panel.
Make sure you know exactly which version of Win 7 you're running.
Restart your computer from cold (with no iTunes).
Go to Apple website and download the correct version for your operating system. Install following Apple prompts.
Once installed, close iTunes.
Restart your computer from cold (with new iTunes).
Start iTunes - all should be operating well! Good luck ... -
My IPOd will not charge. I have bought a new USB and it still will not charge
My IPod will not charge. I have bought a new usb and it still will not charge.
Have a read of this it may help. http://support.apple.com/kb/TA44551
-
I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7.1.2 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.
I have the same issue on my iPhone 5s
I've closed the app and re-booted the phone several times but it did not resolve the issue.
Upgrading to iOS 8.0.2 did not resolve it either.
Erasing the iPhone and restoring from a backup did not resolve it.
I'm not sure what else to do. -
I dropped my phone into the bath last night and it was working perfectly fine the hole day, I went to put it on charge and now it won't charge or even turn on what do I do
You can try drying it out internally by wrapping the unit in a paper towel and putting it in a bag with a dessicant safe for electronics such as silica gel pellets, or failing that in a bag of dry, uncooked rice, for a few days. It's very probable that it's been permanently damaged, but it's possible that if you dry it out, it may then work. If after a few days in the bag it still has problems, then you'll need to pay to get it exchanged (by Apple) or repaired (by a third-party repair service) or buy a new iPhone.
Good luck. -
I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge. PLZ HELP ME!!!!
- If in recovery mode the screen will have an iTunes logo with an USB plug.
- Have you tried connecting it to your computer for a n hw and then see if it appears in iTunes. If it does restore the iPod.
- If screen is blank, try placing he iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
i have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Malvinfromny wrote:
... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
i need some help. my iPad was working perfectly fine about 20mins ago and then it just turned off and wont turn back on. its was at about 60% when it stoped working so i have ruled out the fact that its dead. ive tryed turning it back on but it wont please help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up
EDIT - sorry TeeKnows. I was too slow on the draw. My apologies.
Message was edited by: Demo -
My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?
I leave it charging until it gets back to full, usually it turns on after a little bit of time after plugging it in, but all its doing is going to the apple logo screen and going blank again.
-
My phone was updating the new software and now will not turn back on, what do i do?
my phone was updating the new software and now will not turn back on, what do i do?
Never fear, help is here jpeterson4! Have you attempted to plug your device into your home computer? Have you verified that the device is charged? Does anything appear on the device when you plug the device into a charger? Please keep us posted, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT
Maybe you are looking for
-
Hi, I am trying to create a stacked bar chart. On this chart, Y Axis is the status like new, half finished, finished, X Axis is the value. 3 series: North America, Asia, Europe. On the Y Axis, the order of the status from top to bottom should be new,
-
I have table week_tab with data week_num bkg1 bkg2 bkg_type 1 10 20 at_prod 2 40 10 at_serv 3 30 20 prod 2 20 60 at_prod 1 10 50 at_serv 1 20 80 at_net 3 10 30 at_net
-
Urgent: Oracle Text error: DRG-10001: can not access result table
Hi, I am getting the "DRG-10001:can not access result table" error when trying to run the oracle text procedure ctx_cls.train within HTMLDB. The schema i used for parsing is granted with the necessary privileges, and i can run the procedure manually
-
SQL Developer Create Table Statement to ERD Visio Diagram
I have the following Create table statement from SQL Developer and I am trying to generate an ERD Diagram using 2003 Visio. I was wondering what I need to do to convert the Create Table to an ERD Diagram Using Visio. Thanks CREATE TABLE "TT_TEAM"."HR
-
Outage in N. Bethesda - or maybe further?
My tv just went off too. NO stations what so ever. I'm in Clifton NJ. Verizon really aught to have an alert area on their home page to check for info on outages!!!