Ipods fail to get recognized by itunes but appear in my computer - already tried different solutions

Hello,
i have iPod nano 6th generation 8GB and while it is recognized in My computer it isn't recognized in iTunes. When i plug the device on my mac it recognizes it and synces properly.
When i first plugged my nano on my PC it said it can't be recognized or something like that (i didn't do printscreen on that one) so i proceeded and after i saw itunes downloading software i though this woudl take couple of minutes so i left the PC.
when i came back i couldn't see it anywhere in itunes but i was able to see it in my computer like removable device (only with the nano icon) and i was able to see it in device manager.
I have tried the "iPod troubleshooting assistant" and tried this:
iPod: Appears in Windows but not in iTunes >> http://support.apple.com/kb/TS1363
both without having any success.
i wasn't able to complete 6. "Change your iPod's drive letter" as all of the options weren't available to click on.
also i tried plugging my older iPod clasic that i use it very rarely since i started using my nano and same thing happened! first it said your device can't be detected please restore or something like that (i forgot to make a screenchot again, i know, so stupid).
after that it didn't appeared in itunes and had all they sypmtoms the nano had but i tried doing the restore on my mac and it went great and synced data also but when i plug it back on my PC it was the same old story...
my library is much bigger on my PC and i would like to sync my data from there as i don't want to keep a lot of stuff on my mac's SSD. all things point this is a PC issue (as expected) but i would like to fix things instead of doing a clean win 7 install as i have a lot of supplementary software i need to reinstall.
any help is appreciated in advance.
thanks. mile

Hello Coobyj,
Thank you for using Apple Support Communities!
It sounds like something may have disabled the Apple Mobile Device Service, so I would check that next.
This article should help with that:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
These 2 sections in particular:
Restart the Apple Mobile Device Service (AMDS)
Set the Apple Mobile Device Service Startup type to Automatic
All the best,
Sterling

Similar Messages

  • My iPod touch 5g is recognized in iTunes but not in 'my computer' and I have windows 8

    my ipod touch 5g is recognized in itunes but not in my computers I have windows 8 somebody plssss. help

    Maybe here since the iPod has to showe in My Computer to import to coputer
    iOS: Unable to import photos to computer

  • HT1369 Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed and mobile programs associated with my non apple cellpho

    Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed any mobile programs associated with my non apple cellphone. This seems to have started happening after the last Itunes update I did as I was able to put music on my ipod touch a month or so ago. Is there some way to go back to an older version of itunes? I really have no idea what else to do since I followed every step on the trouble shooting page for windows 8.

    I had this problem too and my roommate solved it!
    Go to 'Settings'
    'Music'
    Scroll to the bottom and enter your password to log onto your home sharing
    Then connect to iTunes and sync!

  • I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??

    I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??

    Are you still running iOS 7 bet?. If so go to the private developer section for help. We cannot help you here with beta software.

  • Ipod Nano not recognized by itunes but appears on the explorer. Log message

    My ipod doesn't appear on itunes but is recognized by windows. It used to work before.
    I have found several answers to this problem but no one can't solve the problem : 5R, Terminal Service, Ipod Service, Restore, Reset, Usb, Last version of Itunes....
    With the last version of Itunes, I have launched the diagnotisc and the result is four green led.
    I have recorded the log file and into this one there are few message that show errors (I have copied only interesting messages):
    [SERVICE: 0x140,08:48:25 ERROR] Did not find first letter of stage
    [SERVICE: 0x980,08:51:21 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x980,08:51:21 INFO] File does not exist!
    [SERVICE: 0x980,08:51:21 INFO] [1] CreateFileW error 0x3
    [SERVICE: 0x980,08:51:21 INFO] [1] WriteNewPrefs FAILED!
    [SERVICE: 0x980,08:51:21 INFO] [1] ReadDevicePreferences() failed!
    I can't understand these messages but I have the feeling that they have a relation with the hidden file Preferences store in ipod_control\device
    When I tried to open Preferences with "bloc note" of windows it doesn't work. Maybe this file is corrupted seen that I can open the file "SysInfo" which is in the same repertory. When I format the Ipod with FAT32, these files reappeared with the next power on and I have always same problem.
    Does anyone know if this file "Preferences" is readable with a valid iPOD?
    What mean "Did not find first letter of stage?" of the log message?
    Thanks for your answers,
    Nicolas

    If its brand new and doing this, return it with receipt.

  • My Ipod touch is recognized by itunes, but not by my computer!

    My hard drive recently crashed, and I had to get a new one. I lost all my songs, so I am trying to transfer them to my new harddrive, but windows only recoginzes my ipod touch as a camera, so I can't get to my songs. Help?

    There is no disk mode like it used to be with the older ipod models. If you bought your music in iTunes, make sure autosync is disabled, connect to your computer and right click on your ipod in the device list in iTunes.
    Choose "transfer purchases" to copy all media and apps bought in iTunes to your new iTunes library.
    Also back up manually, to be able to restore your ipod after the first sync, which will erase your device due to the new iTunes library created on your HD.
    Make sure to have at least one contact and event listed on your computer, to get the merge prompt while syncing contacts and calendars.
    More about backups here: http://support.apple.com/kb/HT1766
    There is 3rd party software out there to copy media you did not buy in iTunes, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

  • 5th gen ipod recognized by itunes but not by my computer.

    I wanted to add notes to my ipod but it's not showing up in 'my computer'. The ipod is still recognized in itunes and I can still add and remove songs.
    Whenever I plug it in to the computer I a message that says
    "Do you want to scan and fix ipod (:J)?
    There might be a problem with some files on this device or disc. This can happen if you remove the device or disc before all files have been written to it."
    When I click Scan and Fix it says "The disk check could not be peformed because Windows cannot access the disk."
    I've completely removed and reinstalled itunes and reset my ipod multiple times. I can't tell you how many time I've gone through the 5 Rs.
    Can anyone tell me how to fix this? or If I can fix it? I have Windows Vista.

    Follow the instructions in this article.
    http://www.yourlocaltech.com/resolve-vista-scan-and-fix-error-when-plugging-in-i pod-or-other-devices/
    Usually this happens when the device was improperly ejected from your PC.
    B-rock

  • IPhone not recognized by iTunes, but listed in "My Computer"

    Hi,
    I have exhaustively searched the other threads as well as Apple support. I am running Vista 32-bit. I just received a replacement phone and I have literally never had so much as a hiccup recognizing, syncing, etc. on my laptop which is the only computer I have ever used with an iPhone. When I plug in my new phone initially, a pop up appears stating that Device driver is being installed. It will then appear in "My Computer" as a camera, but does not appear in iTunes.
    I have un-installed and re-installed iTunes.
    I have un-installed and re-installed the driver for iPhone. When I go to the device manager and attempt to install device driver manually, the message appears "Windows found driver software for your device but encountered an error while attempting to intall it. The phone is recognized on my desktop computer and my iPod is recognized on my laptop. So I am assuming it must be something that is setup on my computer that I need to delete,modify, add, etc. Please someone help.

    DR2238 wrote:
    When I start ITunes and plug in my IPhone, ITunes will recognize the IPhone as normal, after about a minute, my IPhone will disappear and disconnect from ITunes. I have the most current ITunes and IPhone versions, I have tried different USB cables and different USB ports with the same result. The IPhone will still be listed as a camera in My Computer but not recognized by ITunes. If I unplug the IPhone and plug it back in, ITunes will recognize it again but drop it after about a minute.
    Any help would be appreciated
    Thanks
    It sounds to me like it could be something to do with some power saving mode you have on your computer, such as screen saver or some other power saving mode. Do you have a laptop or desktop PC? as I am more inclined to think that a laptop might cause it if it were running on battery.
    The power saving modes/screen saver etc should be in the Control Panel, click Performance and Maintenance, and then click Power Options. In the power options box, have a look around in here and temporarily switch off the screen saver, and adjust the various power option values for the various parts of your computer, to the maximum length/or switch that option off so that it isnt used. After these adjustments, restart your computer and load iTunes up and see if the problem remains.
    I never put my iPhone in airplane mode when syncing and I have never had your problem. But if my suggestion doesn't work, then it might be worth trying Piperox13 suggestion.

  • My iPod touch isn't recognized by iTunes, but it is recognized by Windows.

    I'm using Windows 8 and it worked okay for a while. I have uninstalled and re-installed iTunes without success.  It works fine on my other computer (desktop Windows 7). Thanks for any suggestions
    Jim McColl

    Thanks for quick response. After I did the post I kept looking and stumbled upon the site you refer to. I tried a variety of things such as stoping and starting AMDS, re-installing iTunes etc. etc. Finally what I did was remove every vestige of  Apple software, restarting the computer and re-installing iTunes. I was very pleased with the result as not only does it now see my iPod but my library is totally intact including playlists, so no re-building required.
    The link that species these procedures is below.
    http://support.apple.com/kb/HT1925?viewlocale=en_US
    Regards
    Jim McColl

  • Ipod 5th Gen. Not recognized in Itunes, But is in "My Computer" + Immediate Eject on plug

    Whenever I open iTunes, I get an error message that says, "The software required for communicating with iPods and mobile phones was not installed correctly." When I have it try to repair itself, it brings up another error message that says, "the software required for this iPod is not installed correctly. Please reinstall iTunes to install the required software." I have used Revo to remove all traces of Apple products and followed the guidelines in the Apple instructions http://support.apple.com/kb/TS1369 to no avail. I've tried temporarily disabling the firewall and my AVG software during installation and that hasn't helped. My iPod connects with iTunes on other computers just fine, so I can't imagine it's the device. I have tried uninstalling and re-installing multiple times.

    Hello Coobyj,
    Thank you for using Apple Support Communities!
    It sounds like something may have disabled the Apple Mobile Device Service, so I would check that next.
    This article should help with that:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    These 2 sections in particular:
    Restart the Apple Mobile Device Service (AMDS)
    Set the Apple Mobile Device Service Startup type to Automatic
    All the best,
    Sterling

  • My Ipod touch is recognized in iTunes, but not in My Computer

    I recently got a new computer and all my music is on my ipod, much of it was from cd's. To transfer my music on my ipod to my computer i believe my ipod needs to show up in my computer but it isn't... can anyone help?

    Okay, so i did some more looking into it and was able to answer my own question...
    The ipod touch wasnt programmed with the function to go into disk mode which is why it is not showing up in My Computer... (Something along these lines)
    I feel a little dumb now but i guess if anyone else had the same problem this could help...???
    To transfer the music from my ipod touch to computer i went to this link:
    www.wideanglesoftware.com
    and it was a life saver!
    i used the free download which allowed me 100 free music tranfers (which was just enough for me!) and was very easy to use!
    It allows you to copy the music on your ipod(as well as movies, videos, photos, etc...) to itunes in one simple step
    i hope this was helpful to someone... otherwise im just wasting my time...
    Message was edited by: xXneedshelpXx

  • My ipod isn't being recognized in itunes and not in my computer

    when i plug my 2nd generation ipod up it won't go to itunes and it wont even register in the computer. But when i plug up the 30 gig ipod it goes directly to itunes and it shows up in the address bar. I ran the diagnostic and it showed that the 2nd generation was the secondary and not the primary ipod on the computer. I wonder if that has anything to do with that at all? I have no idea I've been checking for months i need some help.

    "I ran the diagnostic and it showed that the 2nd generation was the secondary and not the primary ipod on the computer."
    What diagnostics?
    If you are connecting both iPods at the same time this will cause problems. Disconnect the 30GB while syncing the Nano.

  • My Ipod Touch isn't recognized by Itunes or Windows. (using Vista) I have tried Apple's reinstall, it didn't work.

    I have tried Apple's reinstall, it didn't work. There aren't any other devices in any USB port. Using the same USB connectorcable and port, my computer and iTunes will recognize my friends exact same model of iPod touch (4 gen). Any help? It is a new iPod, never before connected to any computer.

    Yu can try placing the iPod in Recovery mode and then try restoring via iTunes. The problem is that if you can't restore your iPod may be bricked
    Next would be to try DFU mode. this may also brick your iPod if it can't be restored.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Make an appointment at the Genius Bar of an Apple store.

  • My iPOD Touch is not recognized my iTUNES

    My iPOD Touch is not recognized by iTUNES.  I have current OSX and ITUNES versions.  Followed step by step recommendations but it is still not recognized.

    you tried evething here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Have you tried another computer? Tis will help determine if you have a computer or iPod problem.
    Tried another cable?

  • I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed.

    I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed. What shall I do ? I tried reinstalling so many times and everything else I could find. Please help!

    Hello MArk.wijesinghe,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Best of luck,
    Mario

Maybe you are looking for

  • CM25: Sort standard table based on custom table.

    Hi Experts, I need to sort the CM25 capacity table based on a ZTABLE where we will define the sequence number of each material. So when CM25 is executed the material should get sorted based on sequence number maintained in Ztable. Now the challenge i

  • Maximum number of blocks for a bigfile datafile?

    Hello, In 10g, when using bigfile tablespaces, the maximum size of a datafile can be between 8TB to 128TB depending on the block size (2K to 32K). The formula given to calculate the max size of a bigfile datafile is: Maximum datafile size = db_block_

  • Where do I find the default FTP client?

    I'd like to set the Finder back to being my default FTP client, however when I hit Go -> Connect to Server and type anything with ftp:// in front, it opens my Firefox. How do I set it to open the Finder instead? I know I can set the default browser i

  • Spaces not working with Mice

    For some reason, I can no longer active Spaces with my mice. It says it's on, but for some reason when I try to assign a button my mouse doesn't respond at all. I can only active it with a manual keyboard key such as F17. Any ideas, why it's not work

  • Oracle Users blocked after backup offline CRM

    Hi all, everytime the backup offline finished the oracle users are blocked and the system is unable to start up again, so we have to unblock them manually,  does anybody have a clue why this is happening? Many thanks in advance