IPodService Module failed under Windows XP SP3

Greetings. Following the install of Win SP3, my iPodService Module fails.
The error is: iPodService Module has encountered a problem and needs to close.
I’ve tried restarting it, and that didn’t work.
I'm running the latest version of Itunes. Have tried reinstalling and it still fails. Symantec’s site says the registry was affected during the SP3 install and has an EXE file to fix. That didn’t work.
I’ve noticed others having this problem but have not seen and easy fix. One guy went and cleaned up his registry. I don’t think I should have to do that.
Has anybody found a fix for this?
Thank you,
Steve

I’ve noticed others having this problem but have not seen and easy fix. One guy went and cleaned up his registry. I don’t think I should have to do that.
If you Device Manager is currently still blank, and the Symantec fix did not work for you, then that may be your best option for getting the iPod syncing again.
For the manual registry-editing technique, see the following Microsoft document:
Device Manager and Network Connections may be blank after you install Windows XP Service Pack 3
(If you can get your Device Manager displaying properly, the iPod Service Module crash should also go away.)

Similar Messages

Error installing Sun ONE Directory Server 5.2 under Windows 2000 SP3

Hi,
When I attempt to install the Sun ONE Directory Server 5.2 under Windows 2000 Server SP3, I get the following errors:
Installing Sun ONE Server Basic System Libraries
Installed:C:\WINNT\system32\icudt2.dll
Installed:C:\WINNT\system32\icuin2.dll
Installed:C:\WINNT\system32\icuuc2.dll
Installed:C:\WINNT\system32\libadminutil52.dll
Installed:C:\WINNT\system32\libadmsslutil52.dll
Uninstalling C:\WINNT\System32\icudt2.dll
Uninstalling C:\WINNT\System32\icuin2.dll
Uninstalling C:\WINNT\System32\icuuc2.dll
Uninstalling C:\WINNT\System32\libadminutil52.dll
Uninstalling C:\WINNT\System32\libadmsslutil52.dll
Uninstalling C:\WINNT\System32\libnspr4.dll
Uninstalling C:\WINNT\System32\libplc4.dll
Uninstalling C:\WINNT\System32\libplds4.dll
Uninstalling C:\WINNT\System32\nsldap32v50.dll
Uninstalling C:\WINNT\System32\nsldappr32v50.dll
Uninstalling C:\WINNT\System32\nsldapssl32v50.dll
Uninstalling C:\WINNT\System32\nss3.dll
Uninstalling C:\WINNT\System32\sasl32.dll
Uninstalling C:\WINNT\System32\smime3.dll
Uninstalling C:\WINNT\System32\ssl3.dll
Product Install Failed: java.io.FileNotFoundException: C:\WINNT\System32\libnspr4.dll (Access is denied)
I've checked, and this file does not pre-exist under WINNT\System32.
Any ideas why I'm getting this error? Is this a bug in the installer?
Cheers,
Scott

IIRC this file, sasl32.dll, should get installed onto %WINDIR%\system32 when you install DS5.2 windows version.
You may run WinZIP and File/Open "d52diu.zip" (DS5.2 zip image) and look for "nsbasesys.zip", double click to Open it and you should find "sasl32.dll" there.
Gary

All-in-one driver installation fails under Windows 7

I am trying to install the all-in-one printer driver for Windows 7, 64-bit, Service Pack 1. I have downloaded the installer from HP (AIO_CDB_Net_Full_Win_WW_130_141.exe), downloaded it using HP Print and Scan Doctor 4.3 and using the HP Printer Install Wizard (hppiw.exe). All methods fail. My computer is a new Dell Inspiron (Intel i5-4440 @ 3.1GHz, 8GB RAM, 64-bit OS). The printer I am installing for is a HP 6310, which is old but which has worked well for years under Windows XP. I don't think the printer is an issue since the installer never reaches the point of scanning for hardware.
Symptoms:
Installing using the downloaded installer, the initial splash screen displays. Selecting "Install" displays a second screen with several progress indicators beginning with "Checking system...". After checking for a few seconds, an error box pops up complaining that it can't find a file named "hpzpnp.ice_suffix..exe".
There are two files in the Setup directory named "hpzpnp01.exe" and "hpzpnp04.exe". The Autorun file contains many references to an %ICE_SUFFIX% environment variable.
I guessed that the installer executables did not have enough privelege to set environment variables, so I went through the installer directories and set all the executables to run with administrator privelege.
After that, running "Setup.exe" from the top of the install tree, the initial splash appears, followed by the second "checking system..." progress display. Then a new window with advice about keeping firewalls turned on, etc. pops up. Continuing from that point pops up a new error box saying:
"The specified path is too long C:\Program Files (sLar dig mer med hjalp av en demo pa skarmenHitta enkelt dina foton med onskad metod-Datum, Markning, Mappar, Sok, Favoriter)\HP\."
I have done this multiple times, and the parenthesized phrase (Swedish?) is sometimes different, but always wrong. It looks to me as though the installer is trying to decide whether to install 32- or 64-bit drivers, but can't decide which. It fails to initialize a string variable and concatenates garbage onto the "C:\Program Files" path string.
I have also seen an error box with the following error near this point:
"C:\Users\Sid\AppData\Local\7zS4689\Setup\hpzrein01.exe" "-wStub" "3...
"The parameter is incorrect."
Clicking OK on the error box aborts the installation.
Installing using the HP Printer Installation Wizard produces the same error message as the initial attempt with the downloaded installer about missing files with names containing "ice_suffix".
Installing using the HP Print and Scan Doctor progresses as far as the "path is too long" message.
I've done this now many times, trying different things, without success. After each attempt, I run the Uninstall_L4 utility in utils\ccc under the installer tree, then run the OS Disk Cleanup utility. Following an earlier post, I installed the latest version of Flash Player, with no change in symptoms.
Any fresh ideas would be much appreciated.

Hi ehildum,
Thank you for the time and effort you put into your post. I can see you have done plenty of troubleshooting on your own, but I do have an idea.
If the USB cable is plugged in this could be causing issue. Assuming it is connected, let's unplug and take a look at the Device manager. The hpzpnp.ice_suffix indicates a plug and play 'pnp'.
Follow these steps and let me know what happens.
Click on Start
Right click on Computer
Select Manage
On the left panel, click on Device Manager
Click on View at the top and select Show hidden devices
Look in the list for Other devices
If you see the printer here, right click and select uninstall
Look in the list and click on the arrow next to Printers
If you see the printer here, right click and select uninstall
Delete all files in the %temp% folder
Restart the computer
Open the installer from your download (AIO_CDB_Net_Full_Win_WW_130_141.exe)
Do Not plug the USB cable in until the software says so.
Please let me know the outcome of these efforts. If your USB cable was not connected please complete the above steps anyway to see if there is something stuck in the Device manager that could be causing the conflict.
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

3000 N200 Bluetooth "unavaillable" under Windows XP SP3.

Hi !
Yesterday, I ran Windows XP (I normally use Fedora 9 on my laptop) just to use a tool to make an upgrade to my cell phone. The supplied tool needs bluetooth and windows XP to run, so I was obliged. It was month since last boot of XP and bluetooth use.
SO I first upgraded XP to "Mandatory upgrades" and upgraded the virus checker. Took some time.
Then I started the phone app which said that bluetooth was unavailable. The icon shows red in the task bar. I checked all I could in windows and gave up.
Then I restarted the computer and tried to connect to the phone under Linux. Bluetooth was fine and working like a charm on first attempt. So, what should I check/install restart to make bluetooth run on this machine under XP ?
Thanks a lot for your help !

In Safe Mode, the brightness is also adjustable. Tried to run with USB-Flash Disk ubuntu - without installing any additional software or brightness is adjustable. Also, all the shortcuts work on Windows 7 pre-Starter. Only now under Windows XP brightness is not adjustable (plus some more keys). But the other work under Windows XP (volume for example). В безопасном режиме яркость также не регулируется. Пробовали запускать с USB-Flash Disk ubuntu - без всякой установки какого либо дополнительного программного обеспечения яркость регулируется. Также все горячие клавиши работают на предустановленной Windows 7 Starter. Только вот под Windows XP яркость не регулируется (плюс ещё некоторые клавиши). А вот остальные под Windows XP работают (громкость например).

Oracle 7 install fails with Windows XP SP3

After installing Windows SP3 on systems with XP Professional 32 bit, we cannot install Oracle 7.3.4, which is required for an older 16 bit program. Running the Oracle 7 setup.exe returns an error "setup.exe is not a valid Win32 application". The installer file is not corrupt, we can still run the setup successfully on any computers that still have XP Pro SP2 installed.
However, systems that had Oracle 7.3.4 installed prior to the Windows SP3 update will run the software OK; it is just new installations of Oracle 7.3.4 that fail.
I have tried running the install off of a CD, network drive, and copied the files to the local machine, all return the same error. I have tried different users all with Admin privileges. I tried installing with each compatibility mode checked, clean booting the machine, and updating Windows Installer. I always get the "setup.exe is not a valid Win32 application" error.
Any suggestions or info?
Thanks

Here is some updated information.
Systems that have been in service for a long time and updated from Windows XP Pro SP2 to SP3 will not run the Oracle 7 installer. All machines that still have SP2 will run the installer.
However, systems that we recently formatted and reinstalled Windows XP Pro with SP2, and then updated to SP3, will run the installer for Oracle 7 with SP3 already installed. This indicates that it is not SP3 that is the issue. It could be an update that was done in the past (Microsoft or another software vendor), or some different file that is on the other machines (same brand, models, and OS, just been in service without being formatted recently).
We also have Oracle 10g on all the systems, but the old CrisPlus program probably won't run with Oracle 10g, because we have to add "C:\ORAWIN\BIN" to the system Environmental Variables or we get a "Ora7win.dll" error when launching the CrisPlus program. An Oracle expert or programmer may know how to work around this issue, but I do not know how.
This does give us options to fix the Oracle 7 issue. Either rollback the SP3 update and then install CrisPlus prior to the installation of SP3, or format the systems and reinstall Windows XP Pro, Service Pack3, and Oracle 7.
Thanks for the input. If anyone thinks of an easier workaround please let me know.

Graphics crashes under Windows XP SP3 with Radeon X1600

Hello
I've been experiencing a lot of problems with my MacBook Pro recently. Everytime I run an application that demands some graphic power from the X1600 GPU, such as games or Photoshop, the computer crashes and gets EXTREMELY hot (so hot I can't even touch it). Sometimes the screen just goes black, or the audio loops endlessly; others (unfortunatley not too frequently) the crash recovers with a "VPU Recover" message, stating the computer lost connection with the GPU. I noticed that the fans are not running either, so I installed InputRemapper and manually controlled them. Even with the fans running at full speed while operating graphic-demanding applications, the crashes continue to happen.
I've already installed the latest drivers for bootcamp from the ATI website and even deleted the bootcamp partition and re-installed windows XP on it. I installed Everest to check on the temperature of the GPU, and just before a crash, it reaches up to 60º Celsius.
This issue, however, is not exclusive to WinXP, as it too happens on Leopard, where the fans also aren't running automatically. I tried an SMC reboot but this didn't work either.
Any suggestions on how to solve this before my old MBP melts on me someday?
Thanks in advance.

I ran the hardware test. There were no problems at all. Maybe the MBP cooled down after the restart to make the test, who knows. Still, back on WinXP SP3, I had another crash, although the VPU Recover managed to restart the GPU.
Right now the temps are as follows:
Northbridge: 51ºC
GPU:52ºC
CPU Core #1: 54ºC
CPU Core #2: 50ªC
I even tried underclocking the GPU to reduce the heat generation. I installed ATITool 0.25 beta 13 (reportedly the only version that does actually work with the MacBook Pro) and underclocked the GPU's core to 305.10 MHz and the memory to 274.5 MHz. I stumbled on an article via google that described this procedure to help control the heat generation a few minutes after making my original post here; This caused some drop on the heat readings, but not quite a lot:
Northbridge: 49ºC
GPU: 49ºC
CPU Core #1: 50ºC
CPU Core #2: 47ªC
The fans are running at 6000 RPM right now and it does not get any cooler, plus I'm using a refrigeration base (those thingies with fans underneath the laptop).
Upon reinstalling the drivers back then, i did completley uninstall the prior drivers before installing the new ones (titled on ATI's download site as "Bootcamp drivers" for WinXP). I rebooted the machine, and only then I installed the updated drivers. Same procedure just now, and no effects at all.
Any other thoughts? I've looked around the discussion forums and there were a lot of issues just like this one, still unresolved. Looks to me like this is some GPU firmware/BIOS problem, and though it's well documented here on the forums, I can't find any sollution to it.

HP Mini 1120NR under Windows XP SP3: any way to get onboard webcam working?

I can see some 'USB video device' in My Computer but it doesn't seem to behave like webcam. And no application can detect that I have the camera onboard... No drivers for 1120NR webcam for Windows XP are listed on HP website either. Any ideas?

I just had the same problem with my MacBook. (Which I learned about because I had to reboot into windows to take a final exam. Grrrr.)
To get out of reboot ****, turn the computer off. Then zap the PRAM when you turn it back on. To do this, hold down the CommandOption+PR keys while turning the computer on. You will get a gray screen, then it will go black and reboot. After that, you should be able to get into Mac OS.

Photoshop CS5 setup failed under windows 8.1 64bits, both are in french

Je cherche à réinstaller adobe photoshop CS5 sous windows 8.1, mais le système se bloque à la fin de la procédure d'installation, ni la version 32bits, ni la version 64bits n'arrivent à s'installer correctement.
Pouvez-vous m'indiquer une procédure pour réinstaller photoshop CS5.
Cordialement

Jmdlama I am sorry but your post is not translatable.
I would recommend reviewing your PDApp.log for errors. You can find details on how to review your log at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors which you discover.

Establishment of a secure "sign" ID in Adobe Acrobat 9.5.3 prevents reading PDFs in Firefox 18.0.2 under windows XP, sp3.

Sign ID installed, could no longer read PDFs in Firefox. Deleted sign ID in Acrobat, can now read PDFs in Firefox. What gives?

I think, but I'm not sure because the forum database is a bit glitchy today, that your question was answered in this thread: [https://support.mozilla.org/en-US/questions/950806 error message: this adobe acrobat/reader canot be used to view PDF files in a browser].

Trouble getting the default user directory under Windows XP

I m trying to get the default user directory under windows XP SP3.
To do so, I'm using
System.getProperty("user.home");
I was expecting to get a path like "C:\Documents and Settings\user", nstead of that I get "C:\Documents and Settings\user\Destop".
I checked the %USERPROFILE% and %HOMEPATH% window's environment variables and both of them are correctly set ( set to "C:\Documents and Settings\user").
Is there any way to get the right path other than using : System.setProperty("user.home", "C:\\Documents and Settings\\user"); ?

Thanks WalterLaan,
The System.getenv("USERPROFILE") method will, at least, fix the problem under win XP.
I guess i'll have to write a more refined method to be able to deploy my application under differents OSes.
Regards.

Export for quick time running under windows?

I am coming to Final cut X pro from Imovie. Under Imovie I could export a movie that would run under quicktime for both Mac and Windows computers. Now using Final cut X pro, when I export for quicktime, my movie works fine using a Mac computer but fails under windows. When I attempt to open the movie quicktime tells me I have a problem with the codec. It indicates that I need an add on, but does not indicate which one is needed. Share works great for output to my Ipad. What I like to do is export to quicktime and use a windows computer to output to a wide screen tv. I down loaded the latest version of quicktime for windows. Under the share option what codec option should I chose, or do I require an add in to Quicktime? Thanks.

Not that you should have to, but try to make your final export from Compressor to see if that works better. Perhaps this can help you isolate the problem. H.264 should work in Windows, so you could also check your export on a different PC to see if the problem is on the receiving end.
I'll put in my vote here for Flip-for-mac getting their components to play nice with FCX. I have always found it a handy tool.

I have windows xp sp3, run Mcaffee security software- when I open I-tunes it does open however it will not connet to the I-tunes store. I-Tunes diagnostic indicates that it does connect to internet but the secure link to I-Tunes fails.

I have windows xp sp3, run Mcaffee security software- when I open I-Tunes it does open however it will not connet to the I-Tunes store. I-Tunes diagnostic indicates that it does connect to the internet but the secure ling to I-Tunes fails. I-Tunes diagnostic attached. Hope some one can help. Microsoft Windows XP Professional Service Pack 3 (Build 2600) Dell Inc. MP061 iTunes 11.0.2.26 QuickTime 7.7.3 FairPlay 2.3.31 Apple Application Support 2.3.3 iPod Updater Library 10.0d2 CD Driver 2.2.3.0 CD Driver DLL 2.1.3.1 Apple Mobile Device 6.1.0.13 Apple Mobile Device Driver 1.64.0.0 Bonjour 3.0.0.10 (333.10) Gracenote SDK 1.9.6.502 Gracenote MusicID 1.9.6.115 Gracenote Submit 1.9.6.143 Gracenote DSP 1.9.6.45 iTunes Serial Number 0012B5500B576CC8 Current user is an administrator. The current local date and time is 2013-04-28 10:27:11. iTunes is not running in safe mode. WebKit accelerated compositing is enabled. HDCP is not supported. Core Media is supported. Video Display Information ATI Mobility Radeon X1400 **** External Plug-ins Information **** No external plug-ins installed. iPodService 11.0.2.26 is currently running. iTunesHelper 11.0.2.26 is currently running. Apple Mobile Device service 3.3.0.0 is currently running. **** Network Connectivity Tests **** Network Adapter Information Adapter Name: {7282B8D2-078A-4414-82D6-A506F9C935D0} Description: WiMAX Network Adapter - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: 255.255.255.255 Lease Obtained: Wed Feb 13 12:30:29 2013 Lease Expires: Mon Jan 18 21:14:07 2038 DNS Servers: Adapter Name: {9CE46F79-8015-4C15-A074-B1ACA4388E56} Description: Sierra Wireless Network Adapter - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: Lease Obtained: Mon Jan 18 21:14:07 2038 Lease Expires: Mon Jan 18 21:14:07 2038 DNS Servers: Adapter Name: {1A876FC9-50B6-4101-8E4F-838AF1D1CB32} Description: Dell Wireless 1390 WLAN Mini-Card - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: Lease Obtained: Mon Jan 18 21:14:07 2038 Lease Expires: Mon Jan 18 21:14:07 2038 DNS Servers: Adapter Name: {E64A2DD8-7A18-4784-8DC0-08B143E504A7} Description: Broadcom 440x 10/100 Integrated Controller - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: 10.0.40.20 Lease Obtained: Thu Aug 23 15:54:15 2012 Lease Expires: Thu Aug 23 17:54:15 2012 DNS Servers: Adapter Name: {2A9F97F5-D693-427F-BA40-9C3AA36937B1} Description: WAN (PPP/SLIP) Interface IP Address: 107.42.83.109 Subnet Mask: 255.255.255.255 Default Gateway: 107.42.83.109 DHCP Enabled: No DHCP Server: Lease Obtained: Wed Dec 31 18:00:00 1969 Lease Expires: Wed Dec 31 18:00:00 1969 DNS Servers: 66.1.77.7 68.29.73.7 Active Connection: Mobile Connected: Yes Online: Yes Using Modem: Yes Using LAN: No Using Proxy: No Firewall Information Windows Firewall is on. iTunes is enabled in Windows Firewall. Connection attempt to Apple web site was unsuccessful. The network connection timed out. Basic connection to the store failed. The network connection timed out. Connection attempt to Gracenote server was successful. The network connection timed out. Last successful iTunes Store access was 2013-04-16 10:14:47.

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

Connection attempt failed. Please try again. Cisco AnyConnect Secure Mobility Client on Windows XP SP3 -

When trying to connect with Cisco AnyConnect Secure Mobility Client on Windows XP SP3 getting the following error:
Function: CTransportWinHttp::SendRequest
File: .\CTransportWinHttp.cpp
Line: 1170
Invoked Function: HttpSendRequest
Return Code: 806 (0x00000326)
Description: WINDOWS_ERROR_CODE
Function: CTransportWinHttp::SendRequest
File: .\CTransportWinHttp.cpp
Line: 1178
Invoked Function: CTransportWinHttp::handleRequestError
Return Code: -30015479 (0xFE360009)
Description: CTRANSPORT_ERROR_UNEXPECTED
and finally I get the following message:
Function: ConnectMgr::processIfcData
File: .\ConnectMgr.cpp
Line: 2763
Invoked Function: ConnectMgr::processIfcData
Return Code: -30015443 (0xFE36002D)
Description: CTRANSPORT_ERROR_CONN_UNKNOWN
Connection attempt failed. Please try again.
Any ideas, thanks,
Ashok.

Hi Harry,
I only wish I were more up to speed on all of the security technology. I will contact the network administrator and pass your request to him. I will let you know the results (probably later today).
Here is a little background on this issue (optional reading). All clients worked fine up until around the end of September 2013. Then, a rash of Windows updates came along. Around Sept. 20th, I noticed I could no longer connect using the VPN. So, I uninstalled (Mobility Client) but was not able to re-install as the https://site was not longer able to be reached. I got the standard Microsoft 'Diagnose Connection Problems'. So I manually installed the 'Mobility Client' but only get errors. However, I'm only guessing at the 'AnyConnectProfile.xml'. I may have the settings all wrong. Don't know.
We also noticed that all of our Windows 7 clients work fine. None of the Windows XP clients work any longer. I figured it was 'time to upgrade' all of our Windows XP clients.
Regards,
Stan

Module failed IE6 in Windows 7 x64

I have a virtual Internet Explorer 6 running in Windows 7 x64, the application worked good but yesterday Windows display the message IE6.exe is not responding. when i look the event viewer the message said: the application IE6.exe is not responding. the path of module errors C\Windows\SySWoW64\nt0_dll.dll is fail. I find in the another Windows 7 x64.
I try find the nt0_dll.dll in others PC but i can´t find them. please can you help me?

aquí va la traducción, tengo Internet Explorer 6 virtualizado con VMWare Thinapp corriendo sobre Windows 7 x64, la aplicación funcionaba bien pero desde ayer me arroja el error de que el modulo con error esta en la ruta C\Windows\SySWoW64\nt0_dll.dll he buscado este archivo pero no lo encuentro y también lo he buscado en otros PC con Windows 7 x64.
Alguien sabe como puedo resolver esto?

IPodService Module failed under Windows XP SP3

Similar Messages

Maybe you are looking for