Ipon not recognized in windows or itunes

my ipod is not recognized in windows or itunes, but i have a shuffle that is able to be recognized. when i connect my classic to the computer it starts charging but that is it. i know there is a 5r repair but i have yet to do it bc if i have to reinstall itunes i am worried about my music and whether or not i will have to re-add all my music again manually. i have several thousand songs that i have all the artwork for and all song info poosible and it would just take forever. any help would be great. thanks.

I had the same problem just after downloading latest version of itunes. 5 r's didnt work. Device was recognized on my daughters's computer. I also got windows error saying new hardware would not work properly. I eventually got advice to update the ipod driver by going through start menu and'Control panel' (with a right) click and finding "ipod" under device manager. Right click on that and select update. Once it was done my ipod was recognized by both itunes and computer. Now seems to be working fine and no loss of library/music. Hope this may be of some use

Similar Messages

  • 5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

    Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • Device not recognized by Windows or iTunes - Blinking green light

    When I try to connect my iPod shuffle to my computer (Windows XP), it's not recognized by Windows or iTunes. (i.e. device does not appear in Windows explorer or iTunes) While in the USB port, the Shuffle's green light blinks incessantly. My wife uses an iPod on this machine (under separate user name) and has no problems.
    I've tried updating software (iTunes, iPod), restarting my computer and resetting the iPod to no avail. My machine is not on a network. The USB port(s) work fine as I can use my memory stick (no USB cable) with no problems. I've tried connecting my Shuffle under my user name as well as my wife's. Same problem.
    Also, I had my Shuffle setup on an old computer (PC, Windows 2000) and it still works fine plugging into that. (I'm getting rid of it soon, hence why I'm discovering these new problems).
    Please advise. Since my Shuffle is over a year old, I am not eligible for online chat or phone support without paying for an Apple Support agreement.
    I know there's another thread with the same issue that was not resolved on the discussion board.
    Thanks to anyone who can help.

    Recently I used my ipod at work all night, just like normal. After work on the way home, like normal, I plugged it into my aux port on my car's head unit, and plugged it into power. 10 minutes later, in the middle of going over Ortgea Highway(hiway 74 between Orange and Riverside Counties), it just suddenly stopped working. When I plug it into any of my computers at home, nothing happens, it is not recognized or seen. When I plug it into power, it displays either a "sad ipod icon" or a battery with exclamation mark(!) icon. I have brand new power adapters both for the car and home, plus brand new usb cables, thinking that would help. It hasn't and now, since I opened those packages, I am out that $$ and ******. Since I received this unit as payment for electrical services rendered, I have no idea how old it is. Does anyone have any ideas? ([email protected])

  • Replacement Shuffle Still Not Recognized In Windows Or iTunes

    Hello everyone,
    I was having the orange/green light issue and my 512MB shuffle was not recognized in Windows or iTunes 7.0.1. I contacted Apple and they replaced my shuffle - after I attempted all documented fixes and running the Shuffle Reset Utility.
    I plugged the replacement in and received the message "xxx iPod shuffle cannot be updated. The required disk cannot be found." I found an article on how to remove some temp and application files. I did that and also ran "checkdisk" on my laptop and that error went away. The problem is now the shuffle is not recognized in iTunes or Windows once again. The shuffle did come up for less than 10 seconds as the "F" drive and then disappeared and could not be relocated.
    Here is the real rub for me - I plugged the shuffle into my wife's laptop running iTunes 7.0.1 and it works just fine!! Since my laptop is my primary - this is still a major issue for me.
    Does anyone have a fix for this? This has to be a Windows disk or driver issue.
    Does anyone have a fix for this type of issue? It is obviously a Windows disk or driver issue.

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Then try with the iPod in forced disk mode.
    Putting iPod into disk mode.
    Still no joy, see these.
    iTunes 7 doesn't recognize the iPod.
    Your Windows PC doesn't recognize iPod</font color</a>.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.

  • My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

    My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

    Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
    tt2

  • Ipod not recognized by windows or itunes

    OK here's a humdinger: my ipod used to be recognized by my computer (meaning Windows XP), but then abruptly stopped in a catastrophic meltdown that completely wiped my ipod of everything -- didn't even show the menu. Fastforward, ipod is replaced. Windows will still not recognize it -- most of the time. The toolbar says USB device detected and hardware installed and ready to use, but the message that it's not recognized by Windows still appears. Now I said it was recognized sometimes. When it magically is (this is my only description for it because there is no apparent reason), and this is rare, usually after the computer has been turned off for awhile, the ipod will sync through about a fifth of my library then quit. The "disc cannot be found" message appears, and Windows stops recognizing and I'm back to square one. One would think that I now at least have a fifth of my songs on the ipod. Nope, just one for each time this has happened (being 2). Please do not respond with anything having to do with updating or uninstalling/reinstalling drivers, disabling USB 2.0, searching for E:\ drive, Windows Update, the whole appleipod.bat thing, updating itunes, or scanning for new hardware as I have tried these and a few other solutions. I'm just wondering if I'm completely, well, you know. Thanks for your time.

    OK here's a humdinger: my ipod used to be recognized by my computer (meaning Windows XP), but then abruptly stopped in a catastrophic meltdown that completely wiped my ipod of everything -- didn't even show the menu. Fastforward, ipod is replaced. Windows will still not recognize it -- most of the time. The toolbar says USB device detected and hardware installed and ready to use, but the message that it's not recognized by Windows still appears. Now I said it was recognized sometimes. When it magically is (this is my only description for it because there is no apparent reason), and this is rare, usually after the computer has been turned off for awhile, the ipod will sync through about a fifth of my library then quit. The "disc cannot be found" message appears, and Windows stops recognizing and I'm back to square one. One would think that I now at least have a fifth of my songs on the ipod. Nope, just one for each time this has happened (being 2). Please do not respond with anything having to do with updating or uninstalling/reinstalling drivers, disabling USB 2.0, searching for E:\ drive, Windows Update, the whole appleipod.bat thing, updating itunes, or scanning for new hardware as I have tried these and a few other solutions. I'm just wondering if I'm completely, well, you know. Thanks for your time.

  • HT201401 IPHONE NOT RECOGNIZED IN WINDOWS OR ITUNES

    iphone isn't recognized in windows or itunes windows recognizes it as a digital camera that i do have but is not connected

    iOS: Device not recognized in iTunes for Windows
    iPod not recognized in 'My Computer' and in iTunes for Windows

  • HT1414 iphone not recognized in windows or itunes

    iphone not recognized in windows or itunes

    My iPhone 5 was not being recognized by two different computers, windows 7 and windows 8.1.  My wife's iphone 5 had no issues.  I followed all the advice on-line from re-installing iTunes, resetting my phone ( as new and backed up from cloud), device manager troubleshooting, re-install drivers, different cables, different ports.  Oddly enough in the fianl analysis my iPhone only gets recognized when the cable is insert in one way into the phone.  Flip the cable and it goes straight to "unknown device".  Doesn't matter which cable I use, it only works on one side.  My wife's works both ways.  I can't explain it, but there it is.  I put a dot with a permanent marker on the cable to identify which side goes up.

  • Ipad not recognized by windows neither iTunes after error in the iOS5 upgrade

    The iOS5 upgrade was stopped due to an error.
    Since then the iPad is not being recognized by windows neither iTunes. I've re-installed iTunes, the file usbaapl.sys is at windows\system32\drivers and Common Files\Apple\Mobile Device Support\Drivers folders but still there's an error when I plug in the iPad - Apple Mobile Device (Recovery) - This device can not start (code10).
    I've call the support here in Brazil and the only information that I got was that this was due to the fact that I'm running windows XP and it doesn't support iTunes 10.5 and iOS 5. Can any one confirm this? Why there's no information on this when I installed the 10.5 version and downloaded the iOS 5?
    Any help would be highly apreciated because now I have my iPad asking to be connected to iTunes and no chance to get a PC with a different version of Windows...

    Glad you got it fixed - and I wasn't trying to be a wise guy.
    It just seemed logical to me that if iTunes recognized the iPad and the iPhone - but they didn't show un in your Windows Devices Manager or Explorer or whatever it's called - that it was probably a Windows thing.
    Now you must truly be a HappyMommy!

  • TS1363 I'm trying to update to newest software, but during proccess, an error accured, now the iphone 4s wont do anything, it only shows plug into itunes. when i do, the device is not recognized by windows or itunes. any ideas?

    im trying to update to newest ios version. but during the proccess, an unknown error accured, now the device wont do anything, just shows the plug into itunes screen. the device does not show in windows or itunes. the iphone wont do anything. i tried restarting, it shuts off and back on, but only shows plug into itunes thing. any ideas?

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • Nano not recognized in windows or itunes

    Hello all, I have a new laptop with windows 8.1 and will recognize my ipod touch but not my older nano, it's like i doesn't exist. It's not in itunes or USB drivers. I've tried reinstalling itunes, tried different leads, it works still on my old pc. Is there a compatibility issue maybe ? thanks

    Hello jjbell7,
    The article linked below details some useful troubleshooting steps that can help get your iPod Nano communicate with your computer.
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    http://support.apple.com/kb/TS1496
    Cheers,
    Allen

  • Itunes 11.1.4 for Windows: Iphone 4S not recognized in Windows and Itunes

    I recently installed itunes 11.1.4 on my Windows 7 (64) laptop computer and my iphone 4S was no longer recognized in Windows or itunes. Previous versions of itunes had worked with no problems with this combination. I completely uninstalled itunes, apple software update, apple mobile device support, bonjour and apple application support and restarted the computer. When I attached the iphone, it was recognized by Windows. I reinstalled itunes only to find the iphone was no longer recognized in Windows or itunes again. When viewing the device in Device Manager, I discovered the yellow exclamation mark and proceeded to attempt to update the driver. Windows reported that it "cannot verify the digital signature for the drivers required for this device." Repeated the uninstall and reinstall process with a new download of the itunes installer which produced the same result. Need help resolving this problem because I need to sync data on phone with data on computer.

    Hello JHHamlin,
    Go through the section 5. Verify that the Apple Mobile Device USB Driver is installed from the link below
    http://support.apple.com/kb/ts1538
    Go through the above link in the sections which I am mentioning below and see if it fixes your issue.
    > For Windows Vista, Windows 7, and Windows 8
    * Reinstall the Apple Mobile Device Driver
    * In the Device Manager window, right-click Universal Serial Bus controllers and choose Scan for hardware changes from the shortcut menu.
    * Update the Apple Mobile Device Driver> Browse my computer for driver software> Let me pick from a list of device drivers on my computer> Click the Have Disk button.
    * Click the Browse button and navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
    * Double-click the "usbaapl" file
    * Click Open in the Have Disk window. Then, click Next and then Click Finish. Windows will install the driver.

  • How to reformat Ipod Nano 5th gen when not recognized by Windows or iTunes?

    I've done all the steps on the site to correct this problem up until the reformatiing part except I tried to update the driver software but Windows says that it encounters an error when trying to install the new software.
    So after going through the steps I noticed that the iPod I just bought was formatted for Mac. It says that in order for me to reformat, I have to restore my iPod in iTunes but since it isn't recognized my my computer or iTunes, I can't do it.
    Suggestions anyone?

    Hello there, HateKnuckle.
    The following Knowledge Base article offers a pretty thorough step-by-step for troubleshooting your issue:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • IPod Shuffle Not Recognized In Windows Or iTunes v7.0 - What Now?

    Hello everyone,
    I am having the same problem as many who have posted here. I have upgraded my software to iTunes v7.0.1.8. I also accepted the auto update for my iPod Shuffle - 512GB 1st Gen to v 1.44 (I believe). Of course, now my Shuffle is not recognized in iTunes and is only recognized in Windows for less than 5 seconds (as I have monitored it). I am listing below all of the actions I have taken today.
    As none of these have worked, my question is now what? Does anyone have any other suggestions before I take the dreaded step of calling support? Any help is appreciated.
    I am not happy with this upgrade issue at all. I expect much better from Apple.
    Steps Already Taken:
    1. Reset iPod.
    2. Set Terminal Services to "Manual" and restarted my laptop PC.
    3. Changed all USB Root Hub entries power management options to "Allow the computer to turn off this device to save power option" and rebooted.
    4. Assigned my external hard drive a different letter as it was assigned to "E" and tech support documentation suggested I changed it - I changed it to "M".
    5. I stopped the iPod Service via the Services and Application interface from My Computer/Manage, reattached the Shuffle, and started the iPod Service. The Shuffle was still not recognized.
    6. I uninstalled iTunes 7.0.1.8, the Apple Software update and QuickTime. I deleted all temp directories; program files folders and all possible traces of all three pieces of this software. I also deleted my iTunes library. I reinstalled all of this software and re-built my Library. NONE OF THIS WORKED!
    My 30GB Video iPod works fine and always has - it is only the shuffle for which I have this issue any only since the upgrade.
    What do I do now? If no one has another fix, I will be forced to call Tech Support after an experience with them over a year ago I would almost rather throw this thing away!

    qswh - I too cannot play the songs that are loaded on the shuffle. Additionally, I get a green & orange light when I plug it into a USB port and then I either get a blinking orange light or a solid orange light from there after.

  • Folder Warning, iPod not recognized by Windows or iTunes

    Okay. My other computer froze up while the iPod was in "do not disconnect" mode, and I simply could not get it to shift out of that, so, I disconnected it.
    Still stuck in that mode, even after being disconnected, so I reset it (held down the menu and select buttons), which apparently put it into disk mode. I can't access any menus, play any music, anything like that. All I get is the Apple logo and an icon of a folder with a warning triangle.
    I've tried connecting it to my computer - Window's won't recognize it, and it doesn't show up in iTunes, just makes iTunes freeze. While connected, it goes back into "do not disconnect" mode, but as I can't eject it from Windows or iTunes, I have no choice but to simply pull the plug, at which point it then gives me the check-mark "okay to disconnect".
    I've tried repeatedly to reset it with the various menu-select-play button combinations. I have tried letting the battery die and then plugging it back in. The troubleshooting guides here on Apple.com suggest Restoring it, but as iTunes (the newest, most updated iTunes) won't recognize it, I have no options or menus within the computer to choose to restore it.
    Help?

    Okay. Thank you for your continuing attempts to answer my problem. The iPod is already in Disk Mode, though I'm not sure this is really the mode I want to be in, as neither of the computers in my house are recognizing it. I tried the iPod Reset Utility, but it too sits there with a greyed-out "Reset" button as if no iPod is connected.
    I have taken a look at the iPod Service site, but as mine's a bit older and not under warranty, it would appear that I can't get free service directly officially from Apple. I'm going to try talking to people at the local Apple Store, if their Genius Bar schedule isn't all booked up.
    Thanks again, and if anyone has any more ideas, I'd appreciate them.

Maybe you are looking for

  • My iPad is not connecting to wifi when any other device is. what do I do?

    My iPad shows that it is connected to the wifi at my house, but when I try to load anything, it doesn' t work. On Safari, it says "Safari cannot open the page because it could not establish a secure connection to the server." And Google Chrome gives

  • Two Finger Right Click on late G4 iBook with USB Trackpad?

    I learned that with OSX Version 10.4.7 it is possible to use the two-finger-click instead of ctrl-click for right-clicking. But this only works on the new Intel Macbooks/Pro. Well, this is nice. For older Laptops with ADB-Trackpad there is a freeware

  • DVI/HDMI connection for Thinkpad R61 (with IBM 2504 Docking station) and Samsung LNT4665F LCD TV

    I am trying to connect my laptop (Thinkpad R61) with my TV (Samsung LNT4665F) using a DVI/HDMI cable. Because the R61 doesn't have a DVI port, I am using it in the IBM 2504 Docking station. I have docked the computer, connected the DVI/HDMI cord (usi

  • Attachments to Notifications - using "Services for Object"

    Hi All, I have sucessfully created a VC application (7.0 sp13) to create a General Notification in R/3 using the BAPI -  IQS4_CREATE_NOTIFICATION Our users in R/3 4.7 use the button in the Top Left Hand corner of the Screen "Services for Object" to a

  • HttpVsXI adapter

    hi,   i am doing R/3-XI-XI-file scenario...which adapter sould we use to connect two XI systems.can we do that by using XI adapter? and can we use HTTp adapter for the same? if so, -->in which situation we go for HTTP and -->in which situations we go