Ipond Nano won't connect, Driver error?

my ipod nano won't connect to my windows 8 laptop
i've tried all the steps on the help site thing
any tips, i really don't want to reinstall itunes

Call the home stereo manufacturer. You need to find out from them if their docking system is compatible with the iPod Nano 5th gen with video.
From the iPod Nano FAQ
*+Question: Can I connect iPod to my home stereo?+*
*+Answer: Yes.* With its powerful 60 mW amplifier and 20 Hz to 20 kHz frequency response, iPod will sound great on your home stereo. Third-party stereo adapters are available for listening to your iPod music library using home stereo speakers. *Compatible devices must be self-powered and support audio output through a 3.5 mm headphone jack.* For optimal sound quality when using external speakers, set the iPod volume at less than half the maximum output and adjust your listening volume through your stereo controls. This prevents overamplification, which can cause distortion and reduce audio quality.+

Similar Messages

  • 6208C Connectivity Driver error when upgrading to ...

    Hi, I uninstalled PC Suite today, followed all the other threads, downloaded Nokia PC Suite Cleaner (but it crashes almost immediately), I have installed and run Microsoft cleaner and now I have no Nokia reference in " Drive C", or in the registry as I edited that as per other threads, I attempted to install version 7.1 and also OVI at different times, both halt and report the error.
    "The older versioin of Nokia Connectivity Driver could not be uninstalled, please contact ........"
    I do not know the original version of PC Suite that was installed on my computer, however it is now gone.  I have as I said 6208C, Windows Vista.
    I wish someone would take the time to lay out a solution for me if there is one that can be shared.  Perhaps a link to an earlier version of PC Suite that I can reinstall to have functionality returned?
    Thank you in advance.

    Hi, guy, I think you need to restart you PC after running the cleaner, good luck.

  • Nano won't take updates (error 1417)

    Hi, my Nano won't let me take the newest updates. If is giving me and error message 1417. That's all it is stating.
    My Nano won't let me dissconnect either. There is another message...The device 'Generic Volume' cannot be stopped right now. Try stopping the device again later."
    I just want it work cause I paid for a product that seems like after the warrenty is up it turns to crap.
    Please help!

    I have followed the instructions but failed to restore my iPod.
    I could not use my iPod now as the iPod screen only show "Use iTune to restore".
    Should I send the iPod to service centre or any other step I could take?

  • Sixth generation iPod Nano won't connect

    I have a sixth generation ipod nano.  When I connect it to my computer, it will charge, but I can't add any music.  It won't show up in the iTunes sidebar, nor will disk mode work (I tried putting it into disk mode and it goes straight to the "safe to eject" screen and I have to do the sleep+volume down restart).  I've uninstalled and reinstalled iTunes, reset the iPod, reset my computer, tried a different cord, and everything else the support website said to do.  Is there anything else I can try or I'm I screwed?

    When you connect the iPod, does its screen change to indicate that it is connecting? 
    In iTunes, you do not see it in the sidebar, under DEVICES?  NOTE:  The latest version of iTunes may hide the sidebar.  If it is hidden, go to menu bar, under View, and select Show Sidebar.
    Try going through this procedure, to see if the iPod's assigned drive letter is the problem
    http://support.apple.com/kb/ts1493
    When you do this, do you see it listed in Computer Management?

  • My 5th Gen iPod Nano won't connect to itunes or computer, just keeps resetting. Reinstalled itunes to no avail, other ipods connect fine...help please

    I re-installed i-tunes but this didn't solve the issue.  Other iPods including additional 5th generation nanos connect and sync just fine.  When it's plugged into the computer, it says "Connected...Eject before disconnecting" but doesn't show in itunes or the computer, then the ipod resets and the cycle begins again.  It plays music just fine.  It also plays fine when directly connected by USB to a Toyota Avalon.  Any suggestions on how to resolve this?  Thanks!

    Hello djbrown1
    Check with the article below to troubleshoot issues with your iPod not showing up in iTunes. There are two symptoms to look for to pick the right avenue of troubleshooting. Look for to see if your iPod shows up on your computer, similarly like a camera or an external hard drive. Check out the articles below to troubleshoot you further.
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    iPod nano (5th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    Regards,
    -Norm G.

  • My iPod Nano won't connect to iTunes and I need to charge. Sometimes it turns on but then, when I try to connect it when it turns on. It just turns off all over again. Please help?!

    Well, I have an iPod Nano and it's not turning on. When I try to connect it, since I have to charge it. It won't work. It always turns off and on.

    you dont have to connect to itunes to charge a nano you just plug it in to the computer and it will charge if you give it time.i hope that my advise helps.:)

  • Nano won't connect to stereo dock

    I am having trouble getting my 5th gen nano to connect to my home stereo dock. It returns a message on the nano "Unrecognised Device" Older nanos 2nd & 3rd Gen work but my new one won't. Any suggestions how I fix this?

    Call the home stereo manufacturer. You need to find out from them if their docking system is compatible with the iPod Nano 5th gen with video.
    From the iPod Nano FAQ
    *+Question: Can I connect iPod to my home stereo?+*
    *+Answer: Yes.* With its powerful 60 mW amplifier and 20 Hz to 20 kHz frequency response, iPod will sound great on your home stereo. Third-party stereo adapters are available for listening to your iPod music library using home stereo speakers. *Compatible devices must be self-powered and support audio output through a 3.5 mm headphone jack.* For optimal sound quality when using external speakers, set the iPod volume at less than half the maximum output and adjust your listening volume through your stereo controls. This prevents overamplification, which can cause distortion and reduce audio quality.+

  • DirectAccess Windows 8 Client Won't Connect - Last Error Code: 0x2af9

    Hi All
    Well I've had 2012 DirectAccess up and running now for about 2/3 weeks (using Win8 client only), it's been "ok" (most problems are client based - like Services not restarting upon resuming from sleep).
    Yesterday I spent many hours connected to DirectAccess from my Windows 8 Laptop. When it's working, I love it.
    Today, it's a completely different story.
    Windows 8 won't damn well connect. At first I started getting prompted to enter proxy credentials (I have no idea why, have never been prompted for this before and the internal TMG proxy shouldn't even be in the loop, given my DA server has it's own
    public IP address). The DA server has a completely separate public IP to the proxy's public IP address and the DA is setup with 2x NICs.
    The error I'm getting is:
    Interface IPHTTPSInterface (Group Policy)  Parameters
    Role                       : client
    URL                        :
    https://da.fqdn:443/IPHTTPS
    Last Error Code            : 0x2af9
    Interface Status           : failed to connect to the IPHTTPS server. Waiting to reconnect
    Where do I find out what 0x2af9 error code means?

    Hi,
    The information for your errorcode seems to be related to not beeing able to lookup the host (the information from MSDN is pasted below.)
    Can you verify that your client can resolve "da.fqdn" to the correct IPv4 address?
    http://msdn.microsoft.com/en-us/library/windows/desktop/ms681391.aspx
    WSAHOST_NOT_FOUND
    11001 (0x2AF9)
    No such host is known.
    Jonas Blom | Relevo AB |
    http://blog.nrpt.se
    Hi Jonas
    Thanks for your input. I think you might be right.
    I suspected IE wasn't resetting my connection settings (even though I had un-ticked 'use a proxy server' - I don't think it had 'applied').
    So, I did a reset of IE10, noticed all of the connection settings were gone and DA connected.
    There definitely seems to be a gap in the DirectAccess solution in that it refers to the IE proxy/connection settings rather than just goes out to the Internet like Outlook does. When on the Domain, obviously you'll receive GPOs which in most organisations
    that use things like Proxies (e.g. TMG) these GPOs will apply the proxy settings, but then when you disconnect from the Domain and you want to roam, those proxy settings need to be disabled - at least until DA has connected, then you're free to apply
    the proxy as the gateway again.
    It's a bit annoying.

  • Help!  New Nano won't connect to computer

    Hope someone can help!
    We bought a Nano yesterday, unfortunately haven't been able to load anything onto it as yet. The story so far:
    We have downloaded itunes and set up an account. When we plug in the device the message on the ipod screen rotates between 'Connected / Ejecting / OK to disconnect' and occasionally a windows error messages pops up 'USB device not recognised - device malfunctioned'
    I know it's not the computer as I've got an itunes account and my ipod is always recognised, and I've tried both USB cables with my ipod which works fine. We've also tried rebooting the Nano by holding down the Menu and middle key together, unfortunately this doesn't work either.
    Has anybody got any ideas before I take it back to the store?
    Thanks!
    Karen and Mark

    Hello there,
    And welcome to Apple Discussions.
    First, I would try manually putting the iPod into [Disk Mode|http://support.apple.com/kb/HT1363] and then reconnecting it to your computer to see if that helps.
    Otherwise, I would work through each and every one of the troubleshooting solutions provided below in this Apple support document. It sounds like you might have tried a few already, but make sure to attempt each one. Hope it helps.
    [iPod missing in My Computer or in iTunes for Windows|http://support.apple.com/kb/TS1369]
    Or if you are using a laptop, check out this article as well.
    [iPod not recognized when connected to Windows laptop over USB|http://support.apple.com/kb/TS1401]
    B-rock

  • My nano won't connect to the computer....

    when i plug in my ipod nano nothing happens, it doesn't even charge...it doesn't show up in my computer (or disk manager) it doesn't show up in my itunes...i tried the 5r's, nothing worked...i tried diff. USB port, still nothing.......and the thing is that i also have a mini but my mini still connects to the computer and updates...but my nano wont...and i mean nothing works...all that happens is that the nano lights up but nothing, no charge, no connection, not shown in my computer...etc
    plzz help!!!

    I'm having the same problem. My nano will charge to
    the wall outlet, but it won't react to my computer at
    all. I've tired all my USB ports, none of them work
    any differently. I've also tried the 5R's thing
    multiple times and it don't help any. It won't show
    up on my disk manager, computer, or itunes.
    Help?
    Windows XP
    yea this is how my nano is, it charges usin my stereo for ipods, but the comp wont recognize it at all.....so my question is STILL unaswered ppl...plz!!

  • 2Gen Nano won't connect to Itunes

    I have a 2Gen Ipod Nano, and it refuses to connect to Itunes. I have done every troubleshooting step, still no success. Any help would be much appreciated.

    I don't know what "every troubleshooting step" means unless you state it, so... 
    Are you using a direct USB port on the computer?  Did you confirm that USB is working properly, by connecting something else to it, preferably something similar to an iPod, such as a USB flash drive?
    Did you confirm your USB docking cable is good?  You can do this by trying that cable with another Apple device, or by trying your iPod with another (known-good) cable.
    Did this work before with this computer and this iPod, and it does not know for some reason?  Or is this the first time you are trying to connect this iPod to this computer?  If it worked before with the same setup, there is less chance that the cause is a software issue on the computer.
    If you can rule out bad USB port, bad USB cable, and computer software problem, the remaining possibility is a problem on the iPod.  Did you try putting the iPod in Disk Mode?
    http://support.apple.com/kb/ht1363
    Shut down the computer and disconnect all USB devices.  Start it up with only standard keyboard and mouse connected (if nornally used).  Run iTunes and connect iPod to a direct USB port.
    What version of Windows do you use?  Is it XP?

  • My iPod nano won't connect to any computer!!

    It worked for a while on my computer, got my bunch of songs on it. Then it stopped connecting into iTunes and then stopped connecting into the computer all together. It won't even light up when I plug it in. I can still listen to my songs on it, I just can't charge the battery or get new songs. I tried using all the different USB ports, and restarted my computer about 50 times. (I'm using windows) I also reinstalled iTunes and the iPod but it's still not working! I also took it to a friend's and tried plugging it into their computer with my iPod cord and their iPod cord and it still wasn't connecting!
    I desperately need help please!

    I am having a similar problem. I am actuall on my third 2nd generation nano. One I had to return do to that issue. I recieved the second one (product red) and I was able to get 600 songs on it froma friends computer. It connected to mine once but won't anylonger. The third one I was having the same issue with it but somehow got it to work. I updated itunes and ran a virus scan. I wish I could help but I'm starting to think about stomping on them. I have 4, three work and one dosen't.

  • Need Help, my Ipod Nano won't connect and sync with ituens

    So I downloaded the most recient itunes update the other night, and now my ipod nano will not sync with itunes.  My computer when I search devies and printer shows in devies as (apple ipod USB device, and for unspecified devices Apple Moble Device USB Driver), and I have tried other ipods around the house and they will sync with my itunes with no problem.... also another thing is that if I close the itunes and try to reopen itunes with my nano is pluged in it will not open. But when I remove this particular Ipod, and try to reopen itunes ill will open.
    I have tried redownloading itunes a million times, used different USBs, restored itunes to new, and restarted ipod, and have restarted the computer a million times.
    Why is it that this one nano will no longer link to itunes so that I can update my music on it. Please any one begging you, I am loosing my mind a patiences. Anyone help me please, I just want to update my music on this ipod.
    How can one ipod no longer sync????
    Please and thanks.

    I saw in one thread related to this that you have to make sure that the process "iTunes Helper" is running when you have your iPod connected. You can see that by running Activity Monitor, select All Processes, and then look for iTunes Helper. Based on everything else you tried, there could be a physical problem with your Nano. One of the pin connections may be bad. Will it show up on another Mac's iTunes?

  • Ipod Nano won't connect to windows vista

    Help Help Help
    ive had an ipod nano 3rd gen for xmas and my hewlett packard pc with windows vista operating system wont recognise the ipod thus meaning im sat here wiv a shiny new ipod with absolutely nothing on it SOB SOB
    please someone help meeeee
    cheers Paul

    Your speaker has probably auto connected to your phone so the Nano can't see it. Turn off BT on your phone and any other BT devices you've connected with, put the speaker in pairing mode and try again.

  • Nano won't connect

    I have a customer that own's a 2012 GMC Terrain with the basic touch screen radio. When we plug into the USB port the Nano will charge, but will not function thru the radio or steering wheel controls. I used an Ipod 5th Gen and it works fine. Also going to a Terrain with the Navigation radio both the Nano and the 5th Gen I pod classic function thru radio and steering wheel controls. I checked software on Nano and it has the latest. Is this just a compatibility issue or are we missing a setting on the Nano?

    yeah, it's firewire because ipod has nothing to do with firewalls, that's an internet connection thing. go to start>right click 'my computer'>click 'properties'>go to 'hardware' tab>click 'device manager' button>check if there is a red 'x' or yellow exclamation point next to something like 'ieee 1394'.. if so you likely need new/reinstall/updated drivers for your firewire hardware (which you could download from the manufacturer's website (pc manufacturer or if its a pci card that company) or possibly from a windows update). try usb if available cause it tends to work better on windows.
    i apologize if the steps to device manager aren't completely correct i pulled that from memory because i'm on a mac right now (and no access to a pc) and i was assuming you are on xp.

Maybe you are looking for