IPone 3GS activation problem  and IPhone 4s restoring error 4005

I upgraded  my 3Gs  software  from 5 ro 6 but I can't activate it can't find SIM always says NO Service
And I've IPone 4s I restored through Itune but it Can't be complteed error occurred 4005
please help me to solve these problems

Posting more than once makes things much too confusing for anyone trying to help; I've asked the hosts to remove the duplicate.

Similar Messages

  • I just updated my iPhone 4 to iOS6.  In the process, I ran into a problem and had to restore factory settings.  After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "manage local device storage usage." How?

    I just updated my iPhone 4 to iOS6.  In the process, I ran into a problem and had to restore factory settings.  After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "Cannot Download.  There is not enough available local storage to download these items.  You can manage your local device storage usage in Settings."
    How can this be the case when I haven't changed any apps from before updrading to iOS6, and I don't have any music yet on the phone?  Why is it telling me there is not enough local space?

    Hi RileyAvaCadenRiver,
    If you recently updated your iPhone to iOS7, you will need to update iTunes on your computer to iTunes 11.1 or newer for it to correctly recognize the iPhone. You may find the following link helpful:
    Apple: iTunes 11.1.1
    http://support.apple.com/kb/DL1614
    Regards,
    - Brenden

  • Activation problems with iPhone 5

    Has anyone had activation problems with iPhone 5 today?? is there any kind of trouble with itunes and wireless activation??

    I have unlocked and used iphone 5's before. Never had this problem.
    When I put my tmobile SIM in it;ll say no service then go back to the actviation screen after saying "activation required"

  • We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

    We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

    About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone.  Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc.  This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

  • Can not update error 1602 and can not restore error 1604 what is the solution

    Have a IPod touch 4, can't update (error 1602) and can't restore (error 1604) any solution?

    try this support article.

  • HT201210 iphone 5 Restore Error -1

    iphone 5 Restore Error -1 Not Update Firmware

    Error -1 generally indicates a catastrophic hardware failure.  You'll need to bring your phone into Apple or whomever provides warranty service for the iPhone in your country.

  • IOS: Restore errors 4005, 4013, and 4014

    Facing IP4S always power bling bling also during type text a few miniute back to unlock.
    Try Syc and restore BUT error iOS: Restore errors 4005, 4013, and 4014

    How did you try to restore?
    Try all options described here:  iOS: Not responding or does not turn on
    If necessary, back up your device try to restore as a new device to factory settings:
    See Use iTunes to restore your iOS device to factory settings  http://support.apple.com/kb/HT1414

  • IPAD 2 Restore errors 4005, 4013

    I have tried three different computers ( W7 en W8 ), fresh install itunes on one computer, latest version update on other two, different cables.
    After reading some forums:
    Running Itunes as administrator.
    Also manually downloading ipsw files and with shift key trying to restore from file.
    Itunes continually gives errors 4005 or 4013.
    Sometimes I get a screen:
    (FTL:MSG) APPLE NAND DRIVER (AND) RW
    (FTL:MSG) FIL_INIT            OK
    (FTL:MSG) BUF_INIT            OK
    (FTL:MSG) FPART INIT            OK
    read new style signature 0x43313141 ( line:389 )
    (FTL:MSG) VSVFL REGISTER        OK
    (WMR:MSG) METADATA WHITENING IS SET IN NAND SIGNATURE
    (FTL:MSG) VFL INIT            OK
    (FTL:MSG) VFL_OPEN            OK
    (FTL:MSG) YAFTL REGISTER        OK
    (FTL:MSG) FTL_OPEN            OK
    (NAND) _publishServices:642 FTL capabilities: 0x00000000

    If you are getting the same error codes with different cables and computers then contact Apple, it may have a hardware problem : iOS: Restore errors 4005, 4013, and 4014 :
    If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.

  • 5s 8.1 iOS: Restore errors 4005. Won't update or restore

    Hi Guys,
    I downloaded the 8.1 update via the latest iTunes and connected my 5s to update.
    The update failed and i got the 4005 restore error: iOS: Restore errors 4005, 4013, and 4014
    Now when turn on the 5s it just shows the symbol to connect to iTunes.
    So I plug in and get this:
    I click 'Restore' then get this
    So I click 'Restore and Update', then I get Restore Error 4005 again and get stuck in an infinite loop!
    I did create a backup yesterday so I'm not worried about any lost data.
    I have deleted the update and I'm downloading again now. I will also try with a different USB cable and on a different PC.
    Any suggestions or a fix would be much appreciated?
    Thanks.

    Also FYI: The USB cable is a new authentic Apple lighting cable
    Okay so I deleted and downloaded the update via iTunes again, plugged in the 5s via USB and still get:
    After Restore and Update: 'Extracting software...'
    Then:
    Then:
    Then:
    'Extracting software...
    Then: Preparing iPhone for install.
    Now:
    And the 'Connect to iTunes symbol' disappears leaving the screen still turned on but all black.
    Then after a few minutes:
    Hope that helps...

  • Iphone 3gs keeps rebooting and will not restore

    hi
    i got an iphone 3gs
    randomly today i was in the middle of a phone call and its just rebooted itself and would not stop rebooting itself until i manually turned it off.  got home, set it in recovery mode and it went through the whole iphone recovery process.  right at the very end it came up with "iphone "iphone" could not be restored error(-1)
    i cant find out what it means on the internet so i was wondering if you could help me  i did the whole restart computer, change usb etc process and still not recovering
    HELP

    (-1)  it basically is the iphone "iphone" canot be restored due to an unknown error (-1)

  • Iphone 4s stuck in recovery mode and won't restore. error code 9

    My iphone 4s will not start past the apple logo.  When I try to restore using itunes, it will not restore, and I get error code 9.  I have tried different computers and USB ports with no luck.  Any other suggestions?

    Hello pradacxnt,
    Do you get an error code when you are trying to restore your iPhone? If you do, then check out the article below to isolate and resolve the issue.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/TS3694
    Regards,
    -Norm G. 

  • Firefox RC1 XP theme problem and with maximize/restore window

    Hello.
    I've installed theme Alienware Darkstar, and always when I open Firefox, is starts maximized, but it looks like it was not.
    http://img695.imageshack.us/i/96037597.jpg/
    Also, I'm having problem with the "X" when Firefox is maximized
    http://img684.imageshack.us/i/98187752.jpg/
    and where is on window http://img860.imageshack.us/i/11426695.jpg/
    Regards.
    Peter.

    Christian,
    I'm Win 7 SP1, as well, and I can't reproduce your problem, and I tried hard.
    Hal

  • ITunes freezes when syncing iPad 2 and iPhone 4. Error -20

    I have the latest version of iTunes installed on windows xp. When attempting to sync my iPad 2 and iPhone 4, iTunes immediately freezes until I unplug the device. I have tried restoring my iPad, but I'm still experiencing the same issue.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Ipod touch stuck in recovery mode and will not restore. error code 3194

    ipod touch stuck in recovery mode, will not restore and comes up with error code 3194, itunes is up to date, please help

    Hi @rchangel - Thanks for the ideas...
    Yes - it won't let you install the 32 bit version on a 64 bit machine.
    I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
    I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
    I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
    I want Apple to recognise that there is a problem, and then I want them to fix it.

  • IPhone 5 restore Error (1)

    To Whom It May Conern,
    I recieved an iPhone from a friend recently (iPhone 5) with a shattered screen. It does not work anymore, and the home button is damaged beyond use as well.
    The phone is still recognized by iTunes and the PC's I've use it with however.
    I also disessembled it to confirm water damage or not. All stickers white, no water damage.
    I was told by the person whom gave it to me, I would need to replace the screen but could still restore it and get it ready as it was currently.
    I first hooked it up to a Windows 8 pc, and after some driver/software updating, the phone was  recognized/drivers installed/etc., and iTunes had it as able to view Music, Photos, Apps, etc.
    I went to factory restore it, updated iTunes/Windows, and now it is getting an error message (1) every time I do this.
    I have attempted this a total of about 20 times now, on multiple computers, as well as a Mac. The last attempt was on a Mac, and I saved the error details, as written here:
    2014-02-18 10:52:55.000 iTunes[2116:207]: restore library built Oct 10
    2013 at 18:04:35
    2014-02-18 10:52:55.000 iTunes[2116:207]: iTunes: iTunes 11.1.4
    2014-02-18 10:52:55.000 iTunes[2116:207]: iTunes: Software payload
    version: 11B554a
    2014-02-18 10:52:55.000 iTunes[2116:207]: iTunes: Using MobileRestore
    state machine
    [10:53:15.0634] Successfully applied power assertion
    [10:53:15.0637] Changing state from 'Idle' to 'Restoring'
    [10:53:15.0643] amai: AMAuthInstallSsoInitialize: can't find
    SSOClient.framework
    [10:53:15.0647] requested restore behavior: Erase
    [10:53:15.0649] requested variant: Erase
    [10:53:15.1101] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:15.9821] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
    [10:53:15.9825] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "RestoreLogo" Digest = "<CFData 0x7f9d16fc7e00 [0x7fff7d3ddfa0]>{length
    = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9832] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "RestoreDeviceTree" Digest = "<CFData 0x7f9d16892c40
    [0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9839] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "RestoreKernelCache" Digest = "<CFData 0x7f9d168ea840
    [0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9845] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "RestoreRamDisk" Digest = "<CFData 0x7f9d168a7000
    [0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9851] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC"
    Digest = "<CFData 0x7f9d16c21100 [0x7fff7d3ddfa0]>{length = 20,
    capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9859] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS"
    Digest = "<CFData 0x7f9d1507c650 [0x7fff7d3ddfa0]>{length = 20,
    capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9865] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "KernelCache" Digest = "<CFData 0x7f9d16f5f980 [0x7fff7d3ddfa0]>{length
    = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9869] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB"
    Digest = "<CFData 0x7f9d16fd64f0 [0x7fff7d3ddfa0]>{length = 20,
    capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9873] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "AppleLogo" Digest = "<CFData 0x7f9d1689a570 [0x7fff7d3ddfa0]>{length =
    20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9878] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "BatteryCharging1" Digest = "<CFData 0x7f9d1567e560
    [0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9883] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "BatteryFull" Digest = "<CFData 0x7f9d16a7af60 [0x7fff7d3ddfa0]>{length
    = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9888] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "BatteryPlugin" Digest = "<CFData 0x7f9d16c1a4b0
    [0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9892] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "BatteryCharging0" Digest = "<CFData 0x7f9d15650d30
    [0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9897] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "BatteryLow0" Digest = "<CFData 0x7f9d16ecbeb0 [0x7fff7d3ddfa0]>{length
    = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9901] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "BatteryLow1" Digest = "<CFData 0x7f9d13cf2800 [0x7fff7d3ddfa0]>{length
    = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9906] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "RecoveryMode" Digest = "<CFData 0x7f9d1564e840
    [0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9910] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "DeviceTree" Digest = "<CFData 0x7f9d1568cb40 [0x7fff7d3ddfa0]>{length
    = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9915] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: personalizing
    "iBoot" Digest = "<CFData 0x7f9d16886ee0 [0x7fff7d3ddfa0]>{length = 20,
    capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [10:53:15.9919] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID
    <CFData 0x7f9d16a71da0 [0x7fff7d3ddfa0]>{length = 20, capacity = 20,
    bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [10:53:15.9924] amai: AMAuthInstallRequestSendSync: SSO function
    returned NULL, SSO disabled.
    [10:53:15.9928] amai: AMAuthInstallDebugWriteObject: debug object
    written:
    file://localhost/tmp/PersonalizedBundle_1EFE2EB1-D784-4DF4-ACCE-B4DAF9520
    FC2/amai/debug/tss-request.plist
    [10:53:15.9931] amai: AMAuthInstallHttpMessageSendSync:
    httpRequest=<CFHTTPMessageRef 0x7f9d16f60320(0x7f9d16f60330)> { POST
    request, priority -1, url
    http://gs.apple.com:80/TSS/controller?action=2 }
    [10:53:16.2453] amai: AMAuthInstallRequestSendSync: received tss
    response (server version: 2.1.0)
    [10:53:16.2457] amai: AMAuthInstallDebugWriteObject: debug object
    written:
    file://localhost/tmp/PersonalizedBundle_1EFE2EB1-D784-4DF4-ACCE-B4DAF9520
    FC2/amai/debug/tss-response.plist
    [10:53:16.2517] amai: _AMAuthInstallBundlePopulatePersonalizedBundle:
    no entry in manifest found for "Diags"
    [10:53:16.2566] iBoot build-version = iBoot-1940.3.5
    [10:53:16.2574] iBoot build-style = RELEASE
    [10:53:16.2576] requested restore behavior: Erase
    [10:53:16.2598] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:16.2605] requested restore behavior: Erase
    [10:53:16.2625] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:16.2633] unable to open device_map.txt: No such file or directory
    [10:53:16.2987] found device map entry for 0x00008950 0x00000002.
    boardConfig=n42ap platform=s5l8950x
    [10:53:16.2991] _AMRestoreCopyDeviceMapPlistEntryForHardware:
    firmwareDirectory not in options
    [10:53:16.2994] DeviceRequest failed: 0xe000404f
    [10:53:16.2997] command device request for 'getenv radio-error' failed:
    2008
    [10:53:16.2999] radio-error not set
    [10:53:16.3001] unable to open device_map.txt: No such file or directory
    [10:53:16.3003] <Recovery Mode Device 0x7f9d1563ab30>: production fused
    device
    [10:53:16.3005] requested restore behavior: Erase
    [10:53:16.3016] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:16.3023] requested restore behavior: Erase
    [10:53:16.3043] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:16.3491] <Recovery Mode Device 0x7f9d1563ab30>: operation 4
    progress -1
    [10:53:16.3966] bootstrapping restore with iBEC
    [10:53:16.3968] requested restore behavior: Erase
    [10:53:16.3988] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:16.4108] <Recovery Mode Device 0x7f9d1563ab30>: operation 31
    progress -1
    [10:53:17.4124] <Recovery Mode Device 0x7f9d1563ab30>: Recovery mode
    succeeded
    [10:53:17.4130] Finished Recovery Restore Phase: Successful
    [10:53:17.5143] Recovery mode device disconnected
    [10:53:17.5146] Recovery mode device disconnected
    [10:53:17.5148] Device removed when in state Restoring, moving device
    to transition state
    [10:53:17.5150] Changing state from 'Restoring' to 'Transitioning'
    [10:53:17.5153] Creating timer to monitor transition
    [10:53:19.6720] Recovery mode device connected
    [10:53:19.6722] Transitioning device returned, continuing restore.
    [10:53:19.6723] Canceling timer
    [10:53:19.6725] Changing state from 'Transitioning' to 'Restoring'
    [10:53:19.6727] requested restore behavior: Erase
    [10:53:19.6728] requested variant: Erase
    [10:53:19.6745] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:20.1654] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [10:53:20.1658] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "RestoreLogo"
    [10:53:20.1662] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "RestoreDeviceTree"
    [10:53:20.1667] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "RestoreKernelCache"
    [10:53:20.1671] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "RestoreRamDisk"
    [10:53:20.1674] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "iBEC"
    [10:53:20.1676] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has
    been previously personalized; skipping it
    [10:53:20.1680] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "KernelCache"
    [10:53:20.1683] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been
    previously personalized; skipping it
    [10:53:20.1688] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "AppleLogo"
    [10:53:20.1691] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "BatteryCharging1"
    [10:53:20.1695] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "BatteryFull"
    [10:53:20.1699] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "BatteryPlugin"
    [10:53:20.1703] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "BatteryCharging0"
    [10:53:20.1707] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "BatteryLow0"
    [10:53:20.1712] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "BatteryLow1"
    [10:53:20.1716] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "RecoveryMode"
    [10:53:20.1720] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "DeviceTree"
    [10:53:20.1724] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "iBoot"
    [10:53:20.1727] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [10:53:20.1731] iBoot build-version = iBoot-1940.3.5
    [10:53:20.1734] iBoot build-style = RELEASE
    [10:53:20.1737] requested restore behavior: Erase
    [10:53:20.1740] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:20.1745] requested restore behavior: Erase
    [10:53:20.1757] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:20.1766] unable to open device_map.txt: No such file or directory
    [10:53:20.1771] found device map entry for 0x00008950 0x00000002.
    boardConfig=n42ap platform=s5l8950x
    [10:53:20.1775] _AMRestoreCopyDeviceMapPlistEntryForHardware:
    firmwareDirectory not in options
    [10:53:20.1779] DeviceRequest failed: 0xe000404f
    [10:53:20.1782] command device request for 'getenv radio-error' failed:
    2008
    [10:53:20.1785] radio-error not set
    [10:53:20.1787] unable to open device_map.txt: No such file or directory
    [10:53:20.1791] <Recovery Mode Device 0x7f9d16edfcf0>: production fused
    device
    [10:53:20.1794] requested restore behavior: Erase
    [10:53:20.1805] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:20.1813] requested restore behavior: Erase
    [10:53:20.1834] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:20.2282] <Recovery Mode Device 0x7f9d16edfcf0>: operation 4
    progress -1
    [10:53:20.2754] unable to open device_map.txt: No such file or directory
    [10:53:20.2762] found device map entry for 0x00008950 0x00000002.
    boardConfig=n42ap platform=s5l8950x
    [10:53:20.2769] _AMRestoreCopyDeviceMapPlistEntryForHardware:
    firmwareDirectory not in options
    [10:53:20.2776] requested restore behavior: Erase
    [10:53:20.2802] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:20.2816] requested restore behavior: Erase
    [10:53:20.2851] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:20.2862] <Recovery Mode Device 0x7f9d16edfcf0>: operation 42
    progress -1
    [10:53:20.2867] requested restore behavior: Erase
    [10:53:20.2889] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:21.3216] <Recovery Mode Device 0x7f9d16edfcf0>: operation 5
    progress -1
    [10:53:21.6870] unable to open device_map.txt: No such file or directory
    [10:53:21.6874] found device map entry for 0x00008950 0x00000002.
    boardConfig=n42ap platform=s5l8950x
    [10:53:21.6878] _AMRestoreCopyDeviceMapPlistEntryForHardware:
    firmwareDirectory not in options
    [10:53:21.6881] DeviceRequest failed: 0xe000404f
    [10:53:21.6884] command device request for 'getenv ramdisk-delay'
    failed: 2008
    [10:53:23.3506] <Recovery Mode Device 0x7f9d16edfcf0>: operation 6
    progress -1
    [10:53:24.3622] <Recovery Mode Device 0x7f9d16edfcf0>: operation 7
    progress -1
    [10:53:24.6932] <Recovery Mode Device 0x7f9d16edfcf0>: operation 8
    progress -1
    [10:53:24.6935] unable to open device_map.txt: No such file or directory
    [10:53:24.6937] found device map entry for 0x00008950 0x00000002.
    boardConfig=n42ap platform=s5l8950x
    [10:53:24.6940] _AMRestoreCopyDeviceMapPlistEntryForHardware:
    firmwareDirectory not in options
    [10:53:24.6943] <Recovery Mode Device 0x7f9d16edfcf0>: operation 9
    progress -1
    [10:53:24.6945] <Recovery Mode Device 0x7f9d16edfcf0>: Recovery mode
    succeeded
    [10:53:24.6948] Finished Recovery Restore Phase: Successful
    [10:53:25.8983] Recovery mode device disconnected
    [10:53:25.8984] Device removed when in state Restoring, moving device
    to transition state
    [10:53:25.8987] Changing state from 'Restoring' to 'Transitioning'
    [10:53:25.8989] Creating timer to monitor transition
    [10:53:28.3991] RestoreOS mode device connected
    [10:53:28.3992] Transitioning device returned, continuing restore.
    [10:53:28.3994] Canceling timer
    [10:53:28.3996] Changing state from 'Transitioning' to 'Restoring'
    [10:53:28.4028] <Restore Device 0x7f9d16a1e4d0>: operation 44 progress
    -1
    [10:53:28.4036] requested restore behavior: Erase
    [10:53:28.4039] requested variant: Erase
    [10:53:28.4054] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:28.8914] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [10:53:28.8918] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "RestoreLogo"
    [10:53:28.8922] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "RestoreDeviceTree"
    [10:53:28.8927] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "RestoreKernelCache"
    [10:53:28.8929] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "RestoreRamDisk"
    [10:53:28.8932] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "iBEC"
    [10:53:28.8934] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has
    been previously personalized; skipping it
    [10:53:28.8937] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "KernelCache"
    [10:53:28.8940] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been
    previously personalized; skipping it
    [10:53:28.8944] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "AppleLogo"
    [10:53:28.8948] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "BatteryCharging1"
    [10:53:28.8952] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "BatteryFull"
    [10:53:28.8956] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "BatteryPlugin"
    [10:53:28.8961] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "BatteryCharging0"
    [10:53:28.8965] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "BatteryLow0"
    [10:53:28.8968] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "BatteryLow1"
    [10:53:28.8971] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "RecoveryMode"
    [10:53:28.8973] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "DeviceTree"
    [10:53:28.8976] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
    "iBoot"
    [10:53:28.8978] amai:
    _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [10:53:28.8981] requested restore behavior: Erase
    [10:53:28.8983] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:28.9006] device did not return saved USB log
    [10:53:28.9009] device did not return saved panic log
    [10:53:28.9011] previous restore failed with exit status 0x100
    [10:53:28.9035] connected to service com.apple.mobile.restored
    [10:53:28.9038] using protocol version 13
    [10:53:28.9084] unable to open device_map.txt: No such file or directory
    [10:53:28.9087] board config = n42ap
    [10:53:28.9113] no value returned for BootArgs
    [10:53:28.9116] _copyDeviceProperty() failed for restore bootargs
    [10:53:28.9132] no value returned for MarketingPartNumber
    [10:53:28.9135] _copyDeviceProperty() failed for mpn
    [10:53:28.9138] requested restore behavior: Erase
    [10:53:28.9158] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
    No baseband chipid reported. Will match Build Identity based on ap
    chipid and boardid only.
    [10:53:28.9194] value query for 'HardwareModel' returned 'N42AP'
    [10:53:28.9244] <Restore Device 0x7f9d16a1e4d0>: operation 28 progress
    -1
    [10:53:44.9192] previous restore failed: '
    [10:53:44.9192] [nand_part_core:INF@ 145] created partition 4 as
    'Filesystem'
    [10:53:44.9192] Pthread support ABORTS when sync kernel primitives
    misused
    [10:53:44.9192] BSD root: md0, major 3, minor 0
    [10:53:44.9192] [nand_part_core:INF@ 157] published partition 4
    [10:53:44.9192] [nand_part_core:INF@ 145] created partition 5 as
    'System Config'
    [10:53:44.9192] [nand_part_core:INF@ 145] created partition 6 as
    'Diagnostic Data'
    [10:53:44.9192] [nand_part_core:INF@ 145] created partition 7 as 'Bad
    Block Table'
    [10:53:44.9192] [nand_part_core:INF@ 157] published partition 7
    [10:53:44.9192] AppleSamsungSerial: Identified Serial Port on ARM
    Device=uart1 at 0x32600000(0x9cb9d000)
    [10:53:44.9192] com.apple.AppleFSCompressionTypeZlib kmod start
    [10:53:44.9192] AppleSwissPPNFTL started with IOFlashStoragePartition
    provider
    [10:53:44.9192] [NAND] _FindFlashMediaAndKeepout:601 physical nand
    block offset 1
    [10:53:44.9192] AppleNANDFTL registered[NAND] start:356 this 0xa31aa800
    PROVIDER=0xa2e64100 flashMedia=0xa2e64100
    [10:53:44.9192] [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
    [10:53:44.9192] [NAND] WMR_Start:174 FIL_Init  [OK]
    [10:53:44.9192] AppleSamsungSerial: Identified Serial Port on ARM
    Device=uart3 at 0x32800000(0x9cbce000)
    [10:53:44.9192] com.apple.AppleFSCompressionTypeZlib load succeeded
    [10:53:44.9192] L2TP domain init
    [10:53:44.9192] L2TP domain init complete
    [10:53:44.9192] PPTP domain init
    [10:53:44.9192] Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
    [10:53:44.9192] Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
    [10:53:44.9192] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) =
    0x0
    [10:53:44.9192] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) =
    0x0
    [10:53:44.9192] CLCD not initied by iBoot, driver will not load
    [10:53:44.9192] [NAND] WMR_Open:371 VFL_Open    [OK]
    [10:53:44.9192] Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
    [10:53:44.9192] Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
    [10:53:44.9192] Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) =
    0x0
    [10:53:44.9192] Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) =
    0x0
    [10:53:44.9192] AppleH4CamIn::start - back camera expected
    [10:53:44.9192] AppleH4CamIn::start - front camera expected
    [10:53:44.9192] AppleH4CamIn::power_off_hardware
    [10:53:44.9192] AppleH4CamIn::setPowerStateGated: 0
    [10:53:44.9192] AppleMultitouchN1SPI: successfully started
    [10:53:44.9192] AppleAP3DSH::probe found device with ID: 0x3f
    [10:53:44.9192] AppleAP3DSH::handleStart _calibrationMatrix [65149
    -1004 -881] [-2131 64608 -379] [481 595 66374]
    [10:53:44.9192] AppleAP3DSH::handleStart _calibrationOffsets [950093
    -603282 3384666]
    [10:53:44.9192] AppleAP3DSH::handleStart - No calibration inverse
    matrix or the data is invalid, Compute locally
    [10:53:44.9192] AppleAP3DSH::handleStart _calibrationInverseMatrix
    [65953 1016 880] [2172 66508 408] [-497 -603 64699]
    [10:53:44.9192] AppleAP3DSH::handleStart _odr400HzSampleInterval = 2433
    [10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
    [10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
    [10:53:44.9192] AppleSynopsysOTGDevice::gated_handleUSBCableConnect
    cable connected, but don't have device configuration yet
    [10:53:44.9192] AppleCS35L19Amp: could not allocate control 395
    [10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableDetect 0
    [10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableType Detached
    [10:53:44.9192] AppleSynopsysOTGDevice::gated_handleUSBCableConnect
    cable connected, but don't have device configuration yet
    [10:53:44.9192] AppleMultitouchN1SPI: detected HBPP. driver will be
    kept alive
    [10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
    [10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
    [10:53:44.9192] AppleSynopsysOTGDevice::gated_handleUSBCableConnect
    cable connected, but don't have device configuration yet
    [10:53:44.9192] inverting UI colordisplay-scale = 2
    [10:53:44.9192] display-rotation = 0
    [10:53:44.9192] found applelogo at
    /usr/share/progressui/[email protected]
    [10:53:44.9192] unable to find a usable display
    [10:53:44.9192] unable to get framebuffer
    [10:53:44.9192] found PTP interface
    [10:53:44.9192] AppleSynopsysOTGDevice - Configuration: PTP
    [10:53:44.9192] AppleSynopsysOTGDevice          Interface: PTP
    [10:53:44.9192] AppleSynopsysOTGDevice - Configuration: iPod USB
    Interface
    [10:53:44.9192] AppleSynopsysOTGDevice          Interface:
    USBAudioControl
    [10:53:44.9192] AppleSynopsysOTGDevice          Interface:
    USBAudioStreaming
    [10:53:44.9192] AppleSynopsysOTGDevice          Interface: IapOverUsbHid
    [10:53:44.9192] AppleSynopsysOTGDevice - Configuration: PTP + Apple
    Mobile Device
    [10:53:44.9192] AppleSynopsysOTGDevice          Interface: PTP
    [10:53:44.9192] AppleSynopsysOTGDevice          Interface: AppleUSBMux
    [10:53:44.9192] AppleSynopsysOTGDevice - Configuration: PTP + Apple
    Mobile Device + Apple USB Ethernet
    [10:53:44.9192] AppleSynopsysOTGDevice          Interface: PTP
    [10:53:44.9192] AppleSynopsysOTGDevice          Interface: AppleUSBMux
    [10:53:44.9192] AppleSynopsysOTGDevice          Interface:
    AppleUSBEthernet
    [10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
    function USBAudioStreaming
    [10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
    function AppleUSBEthernet
    [10:53:44.9192] IOAccessoryPortUSB::start
    [10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
    function USBAudioControl
    [10:53:44.9192] virtual bool AppleUSBDeviceMux::start(IOService *)
    build: Sep 27 2013 23:30:36
    [10:53:44.9192] init_waste
    [10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
    function AppleUSBMux
    [10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
    function IapOverUsbHid
    [10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
    function PTP
    [10:53:44.9192] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
    [10:53:44.9192] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject
    *) setting debug level to 7
    [10:53:44.9192] 000169.889813 wlan.N[0]
    AppleBCMWLANBusInterfaceHSIC::attachBusGated(): 
    AppleBCMWLANBusInterfaceHSIC (0xa3c5a800) -->>--
    AppleBCMWLANBusInterfaceHSICShim (0xa43240c0)
    [10:53:44.9192] AppleBCMWLANCore::init(): IO80211-40 Sep 27 2013
    22:57:52
    [10:53:44.9192] AppleBCMWLANCore::init(): AppleBCMWLANV2-249.2 Sep 27
    2013 23:32:48 release
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa482f268 established 62078<-lo0->49152 62078<-usb->56320
    [10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
    received reset, closing 0xa482f268
    [10:53:44.9192] recv(13, 4) failed: connection closed
    [10:53:44.9192] unable to read message size: -1
    [10:53:44.9192] could not receive message
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa482f268 established 62078<-lo0->49153 62078<-usb->56576
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa482f210 established 62078<-lo0->49154 62078<-usb->56832
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa482f1b8 established 62078<-lo0->49155 62078<-usb->57088
    [10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
    received reset, closing 0xa482f210
    [10:53:44.9192] recv(14, 4) failed: connection closed
    [10:53:44.9192] unable to read message size: -1
    [10:53:44.9192] could not receive message
    [10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
    received reset, closing 0xa482f1b8
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa482f1b8 established 62078<-lo0->49156 62078<-usb->57344
    [10:53:44.9192] recv(15, 4) failed: connection closed
    [10:53:44.9192] unable to read message size: -1
    [10:53:44.9192] could not receive message
    [10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
    received reset, closing 0xa482f268
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa482f210 established 62078<-lo0->49157 62078<-usb->57600
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa482f268 established 62078<-lo0->49158 62078<-usb->57856
    [10:53:44.9192] recv(13, 4) failed: connection closed
    [10:53:44.9192] unable to read message size: -1
    [10:53:44.9192] could not receive message
    [10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
    received reset, closing 0xa482f268
    [10:53:44.9192] recv(13, 4) failed: connection closed
    [10:53:44.9192] unable to read message size: -1
    [10:53:44.9192] could not receive message
    [10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
    received reset, closing 0xa482f210
    [10:53:44.9192] recv(15, 4) failed: connection closed
    [10:53:44.9192] unable to read message size: -1
    [10:53:44.9192] could not receive message
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa482f210 established 62078<-lo0->49159 62078<-usb->58112
    [10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
    received reset, closing 0xa482f210
    [10:53:44.9192] recv(13, 4) failed: connection closed
    [10:53:44.9192] unable to read message size: -1
    [10:53:44.9192] could not receive message
    [10:53:44.9192] 000169.996345 wlan.N[1] AppleBCMWLANCore::start():
    Starting with MAC Address: <<<mac address>>>
    [10:53:44.9192] 000169.996747 wlan.N[2]
    AppleBCMWLANCore::setPowerStateGated():   powerState 1, fStateFlags
    0x20, dev 0x80326000 (this 1, provider 0)
    [10:53:44.9192] 000169.996762 wlan.N[3]
    AppleBCMWLANCore::setPowerStateGated():  Received power state change
    before driver has initialized, ignoring
    [10:53:44.9192] IO80211Peer::addPhyStatistics Phy stats started for
    addr <<<mac address>>>
    [10:53:44.9192] IO80211Peer::addPhyStatistics Tx Completion stats
    started for addr <<<mac address>>>
    [10:53:44.9192] IO80211PeerManager::initWithInterface cant add
    monitoring timer
    [10:53:44.9192] Started logging for intf
    [10:53:44.9192] IO80211PeerManager::initWithInterface: inited peer
    manager
    [10:53:44.9192] IO80211Interface::init peerManager=0xa4de4400
    [10:53:44.9192] start:156
    [10:53:44.9192] start:156
    [10:53:44.9192] [NAND] WMR_Open:420 FTL_Open    [OK]
    [10:53:44.9192] [NAND] _publishServices:642 FTL capabilities: 0x00000001
    [10:53:44.9192] [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks -
    count: 23 max_count: 23
    [10:53:44.9192] [NAND] _fetchBorrowedList:881 number of borrowed blocks
    16
    [10:53:44.9192] [nand_part_core:INF@ 157] published partition 0
    [10:53:44.9192] [nand_part_core:INF@ 157] published partition 1
    [10:53:44.9192] [nand_part_core:INF@ 157] published partition 2
    [10:53:44.9192] [nand_part_core:INF@ 157] published partition 3
    [10:53:44.9192] [nand_part_core:INF@ 157] published partition 5
    [10:53:44.9192] [nand_part_core:INF@ 157] published partition 6
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa500ca50 established 62078<-lo0->49160 62078<-usb->58368
    [10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
    received reset, closing 0xa500ca50
    [10:53:44.9192] recv(9, 4) failed: connection closed
    [10:53:44.9192] unable to read message size: -1
    [10:53:44.9192] could not receive message
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa500ca50 established 62078<-lo0->49161 62078<-usb->58624
    [10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
    received reset, closing 0xa500ca50
    [10:53:44.9192] recv(9, 4) failed: connection closed
    [10:53:44.9192] unable to read message size: -1
    [10:53:44.9192] could not receive message
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa500ca50 established 62078<-lo0->49162 62078<-usb->58880
    [10:53:44.9192] unrecognized key 'BootArgs' in value query
    [10:53:44.9192] failed to handle value query for key 'BootArgs',
    sending back empty response
    [10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
    received reset, closing 0xa500ca50
    [10:53:44.9192] recv(9, 4) failed: connection closed
    [10:53:44.9192] unable to read message size: -1
    [10:53:44.9192] could not receive message
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa500ca50 established 62078<-lo0->49163 62078<-usb->59136
    [10:53:44.9192] unrecognized key 'MarketingPartNumber' in value query
    [10:53:44.9192] failed to handle value query for key
    'MarketingPartNumber', sending back empty response
    [10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
    received reset, closing 0xa500ca50
    [10:53:44.9192] recv(9, 4) failed: connection closed
    [10:53:44.9192] unable to read message size: -1
    [10:53:44.9192] could not receive message
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa500ca50 established 62078<-lo0->49164 62078<-usb->59392
    [10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
    received reset, closing 0xa500ca50
    [10:53:44.9192] recv(9, 4) failed: connection closed
    [10:53:44.9192] unable to read message size: -1
    [10:53:44.9192] could not receive message
    [10:53:44.9192] client protocol version 13
    [10:53:44.9192] *** UUID 360DBEAB-9524-1042-B7B7-D4CE5137AC4D ***
    [10:53:44.9192] Restore options:
    [10:53:44.9192]      UUID                           => <CFString 0x1564af90
    [0x3d0ad0]>{contents = "360DBEAB-9524-1042-B7B7-D4CE5137AC4D"}
    [10:53:44.9192]      MinimumSystemPartition         => <CFNumber 0x1564aee0
    [0x3d0ad0]>{value = +1589, type = kCFNumberSInt64Type}
    [10:53:44.9192]      SystemPartitionSize            => <CFNumber 0x1564a8e0
    [0x3d0ad0]>{value = +1589, type = kCFNumberSInt64Type}
    [10:53:44.9192]      SystemPartitionPadding         => <CFBasicHash
    0x1564b1f0 [0x3d0ad0]>{type = mutable dict, count = 5,
    [10:53:44.9192] entries =>
    [10:53:44.9192]      2 : <CFString 0x1564b1a0 [0x3d0ad0]>{contents = "128"}
    = <CFNumber 0x1564af10 [0x3d0ad0]>{value = +1280, type =
    kCFNumberSInt64Type}
    [10:53:44.9192]      3 : <CFString 0x1564ae20 [0x3d0ad0]>{contents = "16"}
    = <CFNumber 0x1564af40 [0x3d0ad0]>{value = +160, type =
    kCFNumberSInt64Type}
    [10:53:44.9192]      4 : <CFString 0x1564aeb0 [0x3d0ad0]>{contents = "32"}
    = <CFNumber 0x1564ac20 [0x3d0ad0]>{value = +320, type =
    kCFNumberSInt64Type}
    [10:53:44.9192]      5 : <CFString 0x1564ab20 [0x3d0ad0]>{contents = "8"} =
    <CFNumber 0x1564a5e0 [0x3d0ad0]>{value = +80, type =
    kCFNumberSInt64Type}
    [10:53:44.9192]      8 : <CFString 0x1564abd0 [0x3d0ad0]>{contents = "64"}
    = <CFNumber 0x1564ab10 [0x3d0ad0]>{value = +640, type =
    kCFNumberSInt64Type}
    [10:53:44.9192] }
    [10:53:44.9192]
    [10:53:44.9192] entering load_sep_os
    [10:53:44.9192] device has no sep
    [10:53:44.9192] entering partition_nand_device
    [10:53:44.9192] device supports boot-from-NAND
    [10:53:44.9192] nand device is already partitioned
    [10:53:44.9192] entering wait_for_storage_device
    [10:53:44.9192] Searching for NAND service
    [10:53:44.9192] Found NAND service: IOFlashStoragePartition
    [10:53:44.9192] NAND initialized. Waiting for devnode.
    [10:53:44.9192] entering clear_remap_variable
    [10:53:44.9192] waiting for matching IOKit service: <CFBasicHash
    0x1564a9b0 [0x3d0ad0]>{type = mutable dict, count = 2,
    [10:53:44.9192] entries =>
    [10:53:44.9192]      0 : <CFString 0x1c5e98 [0x3d0ad0]>{contents =
    "IOResourceMatch"} = <CFString 0x156498e0 [0x3d0ad0]>{contents =
    "IONVRAM"}
    [10:53:44.9192]      2 : <CFString 0x529f00 [0x3d0ad0]>{contents =
    "IOProviderClass"} = <CFString 0x1564a960 [0x3d0ad0]>{contents =
    "IOResources"}
    [10:53:44.9192] }
    [10:53:44.9192]
    [10:53:44.9192] executing /usr/sbin/nvram
    [10:53:44.9192] entering format_effaceable_storage
    [10:53:44.9192] effaceable storage is formatted, clearing it
    [10:53:44.9192] [effaceable:INIT] found current generation, 46, in
    group 1
    [10:53:44.9192] [effaceable:INIT] started
    [10:53:44.9192] [effaceable:INIT] started
    [10:53:44.9192] effaceable storaged cleared
    [10:53:44.9192] entering ramrod_probe_media
    [10:53:44.9192] device partitioning scheme is GPT
    [10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
    system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [10:53:44.9192] executing /sbin/fsck_hfs
    [10:53:44.9192] ** /dev/rdisk0s1s1
    [10:53:44.9192]    Executing fsck_hfs (version hfs-227).
    [10:53:44.9192] ** Checking Journaled HFS Plus volume.
    [10:53:44.9192] ** Detected a case-sensitive volume.
    [10:53:44.9192]    The volume name is InnsbruckTaos11B554a.N42OS
    [10:53:44.9192] ** Checking extents overflow file.
    [10:53:44.9192] ** Checking catalog file.
    [10:53:44.9192] ** Checking multi-linked files.
    [10:53:44.9192] ** Checking catalog hierarchy.
    [10:53:44.9192] ** Checking extended attributes file.
    [10:53:44.9192] ** Checking volume bitmap.
    [10:53:44.9192] ** Checking volume information.
    [10:53:44.9192] ** Trimming unused blocks.
    [10:53:44.9192] ** The volume InnsbruckTaos11B554a.N42OS appears to be
    OK.
    [10:53:44.9192] executing /sbin/mount_hfs
    [10:53:44.9192] /dev/disk0s1s1 mounted on /mnt1
    [10:53:44.9192] entering check_for_restore_log
    [10:53:44.9192] found restore log (size = 28041)
    [10:53:44.9192] entering unmount_filesystems
    [10:53:44.9192] error unmounting '/mnt2': Invalid argument
    [10:53:44.9192] entering clean_NAND
    [10:53:44.9192] NAND format complete
    [10:53:44.9192] entering ramrod_probe_media
    [10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0 system=
    data=
    [10:53:44.9192] entering format_storage_for_LwVM
    [10:53:44.9192] entering ramrod_probe_media
    [10:53:44.9192] device partitioning scheme is GPT
    [10:53:44.9192] unexpected partition 'LwVM' - skipping
    [10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
    system= data=
    [10:53:44.9192] entering create_filesystem_partitions
    [10:53:44.9192] User specified system partition size, skipping firmware
    extras size.
    [10:53:44.9192] system partition padding size is: 167772160 bytes
    [10:53:44.9192] unable to open : No such file or directory
    [10:53:44.9192] creating 2 partitions
    [10:53:44.9192] creating encrypted data partition
    [10:53:44.9192] entering ramrod_probe_media
    [10:53:44.9192] device partitioning scheme is GPT
    [10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
    system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [10:53:44.9192] wipe entire partition: 1 (old = 0 new = 1749)
    [10:53:44.9192] block size for /dev/disk0s1s1: 4096
    [10:53:44.9192] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [10:53:44.9192] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [10:53:44.9192] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive
    HFS Plus volume with a 8192k journal
    [10:53:44.9192] block size for /dev/disk0s1s2: 4096
    [10:53:44.9192] /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
    [10:53:44.9192] executing /sbin/newfs_hfs -s -v Data -J -P
    /dev/disk0s1s2
    [10:53:44.9192] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive
    HFS Plus volume with a 8192k journal
    [10:53:44.9192] entering ramrod_probe_media
    [10:53:44.9192] device partitioning scheme is GPT
    [10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
    system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [10:53:44.9192] entering mount_filesystems
    [10:53:44.9192] executing /sbin/fsck_hfs
    [10:53:44.9192] ** /dev/rdisk0s1s1
    [10:53:44.9192]    Executing fsck_hfs (version hfs-227).
    [10:53:44.9192] ** Checking Journaled HFS Plus volume.
    [10:53:44.9192] ** Detected a case-sensitive volume.
    [10:53:44.9192]    The volume name is System
    [10:53:44.9192] ** Checking extents overflow file.
    [10:53:44.9192] ** Checking catalog file.
    [10:53:44.9192] ** Checking multi-linked files.
    [10:53:44.9192] ** Checking catalog hierarchy.
    [10:53:44.9192] ** Checking extended attributes file.
    [10:53:44.9192] ** Checking volume bitmap.
    [10:53:44.9192] ** Checking volume information.
    [10:53:44.9192] ** Trimming unused blocks.
    [10:53:44.9192] ** The volume System appears to be OK.
    [10:53:44.9192] executing /sbin/mount_hfs
    [10:53:44.9192] /dev/disk0s1s1 mounted on /mnt1
    [10:53:44.9192] executing /sbin/fsck_hfs
    [10:53:44.9192] ** /dev/rdisk0s1s2
    [10:53:44.9192]    Executing fsck_hfs (version hfs-227).
    [10:53:44.9192] ** Checking Journaled HFS Plus volume.
    [10:53:44.9192] ** Detected a case-sensitive volume.
    [10:53:44.9192]    The volume name is Data
    [10:53:44.9192] ** Checking extents overflow file.
    [10:53:44.9192] ** Checking catalog file.
    [10:53:44.9192] ** Checking multi-linked files.
    [10:53:44.9192] ** Checking catalog hierarchy.
    [10:53:44.9192] ** Checking extended attributes file.
    [10:53:44.9192] ** Checking volume bitmap.
    [10:53:44.9192] ** Checking volume information.
    [10:53:44.9192] ** Trimming unused blocks.
    [10:53:44.9192] ** The volume Data appears to be OK.
    [10:53:44.9192] executing /sbin/mount_hfs
    [10:53:44.9192] /dev/disk0s1s2 mounted on /mnt2
    [10:53:44.9192] entering resize_system_partition_to_options
    [10:53:44.9192] User specified system partition size, skipping firmware
    extras size.
    [10:53:44.9192] Found SystemPartitionPadding value of 167772160 bytes
    [10:53:44.9192] Erasing system partition prior to resize operation.
    [10:53:44.9192] block size for /dev/disk0s1s1: 4096
    [10:53:44.9192] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [10:53:44.9192] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [10:53:44.9192] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive
    HFS Plus volume with a 8192k journal
    [10:53:44.9192] executing /sbin/fsck_hfs
    [10:53:44.9192] ** /dev/rdisk0s1s1
    [10:53:44.9192]    Executing fsck_hfs (version hfs-227).
    [10:53:44.9192] ** Checking Journaled HFS Plus volume.
    [10:53:44.9192] ** Detected a case-sensitive volume.
    [10:53:44.9192]    The volume name is System
    [10:53:44.9192] ** Checking extents overflow file.
    [10:53:44.9192] ** Checking catalog file.
    [10:53:44.9192] ** Checking multi-linked files.
    [10:53:44.9192] ** Checking catalog hierarchy.
    [10:53:44.9192] ** Checking extended attributes file.
    [10:53:44.9192] ** Checking volume bitmap.
    [10:53:44.9192] ** Checking volume information.
    [10:53:44.9192] ** Trimming unused blocks.
    [10:53:44.9192] ** The volume System appears to be OK.
    [10:53:44.9192] executing /sbin/mount_hfs
    [10:53:44.9192] /dev/disk0s1s1 mounted on /mnt1
    [10:53:44.9192] Trying to resize system partition to 1833959424 bytes
    aka 1749 MB
    [10:53:44.9192] entering adjust_partition
    [10:53:44.9192] partition: requiredSize=447744
    [10:53:44.9192] no change in size
    [10:53:44.9192] Successfully resized the system partition
    [10:53:44.9192] entering maximize_data_partition
    [10:53:44.9192] entering adjust_partition
    [10:53:44.9192] partition: requiredSize=<<<<<IMEI>>>>>>6
    [10:53:44.9192] maximizing data partition to 14020509695 bytes
    [10:53:44.9192] entering adjust_partition
    [10:53:44.9192] partition: requiredSize=3422976
    [10:53:44.9192] no change in size
    [10:53:44.9192] Successfully resized data partition to consume free
    blocks
    [10:53:44.9192] The system partition now has a total HFS+ capacity of
    1749 MB
    [10:53:44.9192] entering ramrod_probe_media
    [10:53:44.9192] device partitioning scheme is GPT
    [10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
    system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [10:53:44.9192] entering unmount_filesystems
    [10:53:44.9192] entering ramrod_ticket_update
    [10:53:44.9192] looking up root ticket hash
    [10:53:44.9192] device tree ticket-hash: <CFData 0x155547e0
    [0x3d0ad0]>{length = 20, capacity = 20, bytes =
    0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [10:53:44.9192] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
    [10:53:44.9192] received valid ticket (2729 bytes)
    [10:53:44.9192] entering restore_images
    [10:53:44.9192] Successfully marked device node /dev/rdisk0s1s1 as
    static data
    [10:53:44.9192] executing /usr/sbin/asr -source asr://localhost:12345
    -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
    [10:53:44.9192] void AppleUSBDeviceMux::handleConnectResult(struct
    BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
    [10:53:44.9192] void AppleUSBDeviceMux::handleConnectResult(struct
    BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
    [10:53:44.9192] ASR: asr: Unable to disable idle sleep - -536870199
    [10:53:44.9192] ASR STATUS: start     241.1     multicast-client
    [10:53:44.9192] ASR: Waiting for connection attempt from server
    [10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
    0xa500c6e0 established 12345<-lo0->49167 12345<-usb->60160
    [10:53:44.9192] ASR STATUS: setup
    [10:53:44.9192] ASR: Validating target...
    [10:53:44.9192] ASR: done
    [10:53:44.9192] ASR STATUS: metadata
    [10:53:44.9192] ASR: Validating source...
    [10:53:44.9192] ASR: done
    [10:53:44.9192] ASR: Retrieving scan information...
    [10:53:44.9192] ASR: done
    [10:53:44.9192] ASR: Validating sizes...
    [10:53:44.9192] ASR: done
    [10:53:44.9192] ASR STATUS: restore
    [10:53:44.9192] ASR RESTORE PROGRESS: 2%
    [10:53:44.9192] ASR RESTORE PROGRESS: 4%
    [10:53:44.9192] ASR RESTORE PROGRESS: 6%
    [10:53:44.9192] ASR RESTORE PROGRESS: 8%
    [10:53:44.9192] ASR RESTORE PROGRESS: 10%
    [10:53:44.9192] ASR RESTORE PROGRESS: 12%
    [10:53:44.9192] ASR RESTORE PROGRESS: 14%
    [10:53:44.9192] ASR RESTORE PROGRESS: 16%
    [10:53:44.9192] ASR RESTORE PROGRESS: 18%
    [10:53:44.9192] ASR RESTORE PROGRESS: 20%
    [10:53:44.9192] ASR RESTORE PROGRESS: 22%
    [10:53:44.9192] ASR RESTORE PROGRESS: 24%
    [10:53:44.9192] ASR RESTORE PROGRESS: 26%
    [10:53:44.9192] ASR RESTORE PROGRESS: 28%
    [10:53:44.9192] ASR RESTORE PROGRESS: 30%
    [10:53:44.9192] ASR RESTORE PROGRESS: 32%
    [10:53:44.9192] ASR RESTORE PROGRESS: 34%
    [10:53:44.9192] ASR RESTORE PROGRESS: 36%
    [10:53:44.9192] ASR RESTORE PROGRESS: 38%
    [10:53:44.9192] ASR RESTORE PROGRESS: 40%
    [10:53:44.9192] ASR RESTORE PROGRESS: 42%
    [10:53:44.9192] ASR RESTORE PROGRESS: 44%
    [10:53:44.9192] ASR RESTORE PROGRESS: 46%
    [10:53:44.9192] ASR RESTORE PROGRESS: 48%
    [10:53:44.9192] ASR RESTORE PROGRESS: 50%
    [10:53:44.9192] ASR RESTORE PROGRESS: 52%
    [10:53:44.9192] ASR RESTORE PROGRESS: 54%
    [10:53:44.9192] ASR RESTORE PROGRESS: 56%
    [10:53:44.9192] ASR RESTORE PROGRESS: 58%
    [10:53:44.9192] ASR RESTORE PROGRESS: 60%
    [10:53:44.9192] ASR RESTORE PROGRESS: 62%
    [10:53:44.9192] ASR RESTORE PROGRESS: 64%
    [10:53:44.9192] ASR RESTORE PROGRESS: 66%
    [10:53:44.9192] ASR RESTORE PROGRESS: 68%
    [10:53:44.9192] ASR RESTORE PROGRESS: 70%
    [10:53:44.9192] ASR RESTORE PROGRESS: 72%
    [10:53:44.9192] ASR RESTORE PROGRESS: 74%
    [10:53:44.9192] ASR RESTORE PROGRESS: 76%
    [10:53:44.9192] ASR RESTORE PROGRESS: 78%
    [10:53:44.9192] ASR RESTORE PROGRESS: 80%
    [10:53:44.9192] ASR RESTORE PROGRESS: 82%
    [10:53:44.9192] ASR RESTORE PROGRESS: 84%
    [10:53:44.9192] ASR RESTORE PROGRESS: 86%
    [10:53:44.9192] ASR RESTORE PROGRESS: 88%
    [10:53:44.9192] ASR RESTORE PROGRESS: 90%
    [10:53:44.9192] ASR RESTORE PROGRESS: 92%
    [10:53:44.9192] ASR RESTORE PROGRESS: 94%
    [10:53:44.9192] ASR RESTORE PROGRESS: 96%
    [10:53:44.9192] ASR RESTORE PROGRESS: 98%
    [10:53:44.9192] AppleUSBDeviceMux::sessionUpcall socket is closed,
    session 0xa500c6e0 (12345<-lo0->49167 12345<-usb->60160)
    [10:53:44.9192] ASR RESTORE PROGRESS: 100%
    [10:53:44.9192] ASR: Copied 1666908672 bytes in 70.21 seconds, 23184.43
    KiB/s
    [10:53:44.9192] ASR STATUS: verify
    [10:53:44.9192] ASR VERIFY PROGRESS: 2%
    [10:53:44.9192] ASR VERIFY PROGRESS: 4%
    [10:53:44.9192] ASR VERIFY PROGRESS: 6%
    [10:53:44.9192] ASR VERIFY PROGRESS: 8%
    [10:53:44.9192] ASR VERIFY PROGRESS: 10%
    [10:53:44.9192] ASR VERIFY PROGRESS: 12%
    [10:53:44.9192] ASR VERIFY PROGRESS: 14%
    [10:53:44.9192] ASR VERIFY PROGRESS: 16%
    [10:53:44.9192] ASR VERIFY PROGRESS: 18%
    [10:53:44.9192] ASR VERIFY PROGRESS: 20%
    [10:53:44.9192] ASR VERIFY PROGRESS: 22%
    [10:53:44.9192] ASR VERIFY PROGRESS: 24%
    [10:53:44.9192] ASR VERIFY PROGRESS: 26%
    [10:53:44.9192] ASR VERIFY PROGRESS: 28%
    [10:53:44.9192] ASR VERIFY PROGRESS: 30%
    [10:53:44.9192] ASR VERIFY PROGRESS: 32%
    [10:53:44.9192] ASR VERIFY PROGRESS: 34%
    [10:53:44.9192] ASR VERIFY PROGRESS: 36%
    [10:53:44.9192] ASR VERIFY PROGRESS: 38%
    [10:53:44.9192] ASR VERIFY PROGRESS: 40%
    [10:53:44.9192] ASR VERIFY PROGRESS: 42%
    [10:53:44.9192] ASR VERIFY PROGRESS: 44%
    [10:53:44.9192] ASR VERIFY PROGRESS: 46%
    [10:53:44.9192] ASR VERIFY PROGRESS: 48%
    [10:53:44.9192] ASR VERIFY PROGRESS: 50%
    [10:53:44.9192] ASR VERIFY PROGRESS: 52%
    [10:53:44.9192] ASR VERIFY PROGRESS: 54%
    [10:53:44.9192] ASR VERIFY PROGRESS: 56%
    [10:53:44.9192] ASR VERIFY PROGRESS: 58%
    [10:53:44.9192] ASR VERIFY PROGRESS: 60%
    [10:53:44.9192] ASR VERIFY PROGRESS: 62%
    [10:53:44.9192] ASR VERIFY PROGRESS: 64%
    [10:53:44.9192] ASR VERIFY PROGRESS: 66%
    [10:53:44.9192] ASR VERIFY PROGRESS: 68%
    [10:53:44.9192] ASR VERIFY PROGRESS: 70%
    [10:53:44.9192] ASR VERIFY PROGRESS: 72%
    [10:53:44.9192] ASR VERIFY PROGRESS: 74%
    [10:53:44.9192] ASR VERIFY PROGRESS: 76%
    [10:53:44.9192] ASR VERIFY PROGRESS: 78%
    [10:53:44.9192] ASR VERIFY PROGRESS: 80%
    [10:53:44.9192] ASR VERIFY PROGRESS: 82%
    [10:53:44.9192] ASR VERIFY PROGRESS: 84%
    [10:53:44.9192] ASR VERIFY PROGRESS: 86%
    [10:53:44.9192] ASR VERIFY PROGRESS: 88%
    [10:53:44.9192] ASR VERIFY PROGRESS: 90%
    [10:53:44.9192] ASR VERIFY PROGRESS: 92%
    [10:53:44.9192] ASR VERIFY PROGRESS: 94%
    [10:53:44.9192] ASR VERIFY PROGRESS: 96%
    [10:53:44.9192] ASR VERIFY PROGRESS: 98%
    [10:53:44.9192] ASR VERIFY PROGRESS: 100%
    [10:53:44.9192] ASR: Verified SHA-1 checksum 1666908672 bytes in 8.87
    seconds, 183434.91 KiB/s
    [10:53:44.9192] ASR STATUS: finish
    [10:53:44.9192] entering ramrod_probe_media
    [10:53:44.9192] device partitioning scheme is GPT
    [10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
    system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [10:53:44.9192] entering mount_filesystems
    [10:53:44.9192] executing /sbin/fsck_hfs
    [10:53:44.9192] ** /dev/rdisk0s1s1
    [10:53:44.9192]    Executing fsck_hfs (version hfs-227).
    [10:53:44.9192] ** Checking Journaled HFS Plus volume.
    [10:53:44.9192] ** Detected a case-sensitive volume.
    [10:53:44.9192]    The volume name is InnsbruckTaos11B554a.N42OS
    [10:53:44.9192] ** Checking extents overflow file.
    [10:53:44.9192] ** Checking catalog file.
    [10:53:44.9192] ** Checking multi-linked files.
    [10:53:44.9192] ** Checking catalog hierarchy.
    [10:53:44.9192] ** Checking extended attributes file.
    [10:53:44.9192] ** Checking volume bitmap.
    [10:53:44.9192] ** Checking volume information.
    [10:53:44.9192] ** Trimming unused blocks.
    [10:53:44.9192] ** The volume InnsbruckTaos11B554a.N42OS appears to be
    OK.
    [10:53:44.9192] executing /sbin/mount_hfs
    [10:53:44.9192] /dev/disk0s1s1 mounted on /mnt1
    [10:53:44.9192] executing /sbin/fsck_hfs
    [10:53:44.9192] ** /dev/rdisk0s1s2
    [10:53:44.9192]    Executing fsck_hfs (version hfs-227).
    [10:53:44.9192] ** Checking Journaled HFS Plus volume.
    [10:53:44.9192] ** Detected a case-sensitive volume.
    [10:53:44.9192]    The volume name is Data
    [10:53:44.9192] ** Checking extents overflow file.
    [10:53:44.9192] ** Checking catalog file.
    [10:53:44.9192] ** Checking multi-linked files.
    [10:53:44.9192] ** Checking catalog hierarchy.
    [10:53:44.9192] ** Checking extended attributes file.
    [10:53:44.9192] ** Checking volume bitmap.
    [10:53:44.9192] ** Checking volume information.
    [10:53:44.9192] ** Trimming unused blocks.
    [10:53:44.9192] ** The volume Data appears to be OK.
    [10:53:44.9192] executing /sbin/mount_hfs
    [10:53:44.9192] /dev/disk0s1s2 mounted on /mnt2
    [10:53:44.9192] entering install_kernel_cache
    [10:53:44.9192] writing kernelcache to
    /mnt1/System/Library/Caches/com.apple.kernelcaches/kernelcache
    [10:53:44.9192] entering install_secure_vault_daemon
    [10:53:44.9192] entering get_hardware_platform
    [10:53:44.9192] platform-name = s5l8950x
    [10:53:44.9192] linking /mnt1/usr/sbin/securekeyvaultd to
    /mnt1/usr/sbin/securekeyvaultd.s5l8950x
    [10:53:44.9192] no securekeyvaultd for s5l8950x
    [10:53:44.9192] entering ramrod_ticket_write
    [10:53:44.9192] writing ticket to
    /mnt1/System/Library/Caches/apticket.der
    [10:53:44.9192] entering update_device_firmware
    [10:53:44.9192] create_baseband_update_options: Got imeisv: 6
    [10:53:44.9192] baseband updater options = <CFBasicHash 0x1564bca0
    [0x3d0ad0]>{type = mutable dict, count = 3,
    [10:53:44.9192] entries =>
    [10:53:44.9192]      0 : <CFString 0x1c7238 [0x3d0ad0]>{contents =
    "IMEISwVersion"} = <CFNumber 0x15553aa0 [0x3d0ad0]>{value = +6, type =
    kCFNumberSInt32Type}
    [10:53:44.9192]      1 : <CFString 0x1c7298 [0x3d0ad0]>{contents =
    "autoSetupEnv"} = <CFBoolean 0x3d0e88 [0x3d0ad0]>{value = false}
    [10:53:44.9192]      2 : <CFString 0x1c72a8 [0x3d0ad0]>{contents =
    "disablePing"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value = true}
    [10:53:44.9192] }
    [10:53:44.9192]
    [10:53:44.9192] _baseband_update_requires_system_filesystem_once:
    querying baseband to determine if it requires system filesystem
    [10:53:44.9192] _baseband_update_requires_system_filesystem_once: query
    returned <CFBasicHash 0x1564bb90 [0x3d0ad0]>{type = mutable dict, count
    = 3,
    [10:53:44.9192] entries =>
    [10:53:44.9192]      0 : <CFString 0x1c7008 [0x3d0ad0]>{contents =
    "requireSystemPartitionMount"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value
    = true}
    [10:53:44.9192]      1 : <CFString 0x1c7028 [0x3d0ad0]>{contents =
    "requireUserPartitionMount"} = <CFBoolean 0x3d0e88 [0x3d0ad0]>{value =
    false}
    [10:53:44.9192]      2 : <CFString 0x1c7038 [0x3d0ad0]>{contents =
    "requireBasebandFSPartitionMount"} = <CFBoolean 0x3d0e88
    [0x3d0ad0]>{value = false}
    [10:53:44.9192] }
    [10:53:44.9192]
    [10:53:44.9192] entering update_iBoot
    [10:53:44.9192] found 'AppleImage3NORAccess' object in IORegistry
    [10:53:44.9192] entering update_iBoot_image3_NOR_access
    [10:53:44.9192] write_image3_data: flashing illb data (length = 0x24a1a)
    [10:53:44.9192] write_image3_data: flashing SCAB data (length = 0xaf0)
    [10:53:44.9192] ticket updated
    [10:53:44.9192] write_image3_data: flashing ibot data (length = 0x4518c)
    [10:53:44.9192] write_image3_data: flashing chg1 data (length = 0x88cc)
    [10:53:44.9192] write_image3_data: flashing bat0 data (length = 0xaa4c)
    [10:53:44.9192] write_image3_data: flashing batF data (length = 0x1484c)
    [10:53:44.9192] write_image3_data: flashing logo data (length = 0x1a8c)
    [10:53:44.9192] write_image3_data: flashing recm data (length = 0xdd8c)
    [10:53:44.9192] write_image3_data: flashing dtre data (length = 0x153cc)
    [10:53:44.9192] write_image3_data: flashing chg0 data (length = 0x260c)
    [10:53:44.9192] write_image3_data: flashing bat1 data (length = 0x80c)
    [10:53:44.9192] write_image3_data: flashing glyP data (length = 0xf8c)
    [10:53:44.9192] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
    [10:53:44.9192] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
    [10:53:44.9192] [nand_part_core:INF@2289] first 2 pages of boot blocks
    written with copies of partition table
    [10:53:44.9192] entering update_gas_gauge
    [10:53:44.9192] entering update_ir_mcu
    [10:53:44.9192] looking for mcu nub...no entry from path!
    [10:53:44.9192] TiSerialFlasher not supported on this platform. Exiting.
    [10:53:44.9192] entering update_baseband
    [10:53:44.9192] update_baseband: registering for progress notifications
    [10:53:44.9192] create_baseband_update_options: Got imeisv: 6
    [10:53:44.9192] baseband updater options = <CFBasicHash 0x1564bc60
    [0x3d0ad0]>{type = mutable dict, count = 6,
    [10:53:44.9192] entries =>
    [10:53:44.9192]      0 : <CFString 0x1c71e8 [0x3d0ad0]>{contents =
    "SystemRoot"} = <CFString 0x1564b270 [0x3d0ad0]>{contents = "/mnt1"}
    [10:53:44.9192]      1 : <CFString 0x1c7238 [0x3d0ad0]>{contents =
    "IMEISwVersion"} = <CFNumber 0x15553aa0 [0x3d0ad0]>{value = +6, type =
    kCFNumberSInt32Type}
    [10:53:44.9192]      2 : <CFString 0x1c7298 [0x3d0ad0]>{contents =
    "autoSetupEnv"} = <CFBoolean 0x3d0e88 [0x3d0ad0]>{value = false}
    [10:53:44.9192]      3 : <CFString 0x1c7178 [0x3d0ad0]>{contents =
    "forceUpdate"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value = true}
    [10:53:44.9192]      5 : <CFString 0x1c72a8 [0x3d0ad0]>{contents =
    "disablePing"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value = true}
    [10:53:44.9192]      6 : <CFString 0x1c7198 [0x3d0ad0]>{contents =
    "DisallowFusiing"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value = true}
    [10:53:44.9192] }
    [10:53:44.9192]
    [10:53:44.9192] update_baseband: querying baseband info
    [10:53:44.9192] bbupdater: BEGIN: Querying info at stage first
    [10:53:44.9192] bbupdater:      BEGIN: Preparing first stage
    [10:53:44.9192] bbupdater:           Requested boot mode:  kBBUBootModeNone
    [10:53:44.9192] bbupdater:           Creating transport, attempts remaining
    5...bbupdater:           FAILED(kBBUReturnIOError)
    [10:53:44.9192] bbupdater:           Creating transport, attempts remaining
    4...bbupdater:           FAILED(kBBUReturnIOError)
    [10:53:44.9192] [nand_part_core:INF@3169] next 98 pages of boot blocks
    written with LLB image of size 150080 bytes
    [10:53:44.9192] [nand_part_core:INF@3172] final 156 pages of boot
    blocks written with random data in full page format
    [10:53:44.9192] bbupdater:           Creating transport, attempts remaining
    3...bbupdater:           FAILED(kBBUReturnIOError)
    [10:53:44.9192] bbupdater:           Creating transport, attempts remaining
    2...bbupdater:           FAILED(kBBUReturnIOError)
    [10:53:44.9192] bbupdater:           Creating transport, attempts remaining
    1...bbupdater:           FAILED(kBBUReturnIOError)
    [10:53:44.9192] bbupdater:           Creating transport, attempts remaining
    0...bbupdater:           FAILED(kBBUReturnIOError)
    [10:53:44.9192] bbupdater:      END(kBBUReturnIOError): Preparing first
    stage
    [10:53:44.9192] bbupdater: END(kBBUReturnIOError): Querying info at
    stage first
    [10:53:44.9192] send_bbupdate_status: sending baseband update status to
    host
    [10:53:44.9192] update_baseband: bbupdater error: The operation
    couldn\U2019t be completed. (BBUpdater error 3 - Failed creating a
    communication transport to baseband.)
    [10:53:44.9192] 0: RamrodErrorDomain/3ec: update_baseband: failed
    querying baseband info
    [10:53:44.9192] 1: BBUpdater/3: Failed creating a communication
    transport to baseband.
    [10:53:44.9192] unable

    Hello everyone,
    After dealing with this issue for a few days I was able to fix my issue.
    The errors that I was getting were 1 and -1 on an iPhone4 upgrading to IOS 7
    I read and tried every fix under the sun it seemed.
    The fix for me was the DNS cache (even though I tried it on a different computer)
    Here is the whole story...
    I had a working iPhone4 on iOS6 when I started trying to upgrade to the latest version.
    I plugged it in to iTunes and hit restore, after an extremely long DL (slow on my end) it failed.
    I decided at that time that I would actually start trying and I unplugged all my other USB and used a real apply usb cable as opposed to my long one.
    I also updated iTunes to the latest version and hit the restore button in iTunes again.
    After another extemely long DL (because turns out my old verison of iTunes downloaded 6.1.3) I tried again.
    Error 1 or -1 depending on which time I tried.
    I then checked my hosts file and it was good so I tried disconnecting the battery and hitting the power buton a bunch to drain the power and it still failed with error 1.
    After maunally downloading the firmware from ipsw downloader i tried again but no results so I downloaded the alternate version of the software for GSM phones which was the incorrect version so didn't even start before it failed.
    Frustrated at this point so I get a netbook and throw a fresh copy of windows 7 onto it.
    Update all the drivers and various runtimes then installed latest verison of iTunes.
    checked the hosts just to be stupid sure it would work and it was good.
    Error 1
    So at this point I have waisted two days and I have alreadly replaced the clients phone as "I (meaning apple)" broke it.
    So back on my main PC I start from square one and realise that I never actually cleared my DNS cache as it says in many instructions.
    So I try that and 10 minutes later I got a brand new phone.
    TLDR: Clear your DNS cache in Windows and Mac
    Steps I used to fix it
    Apple brand charger
    back/motherboard usb port
    hosts file empty
    dns cache cleared
    dfu mode
    Shift click restore button for custom ipsw file / latest version
    To clear DNS cache in Windows hit the windows key or button in the bottom right (windows 7) and type CMD
    Right click and run cmd as administrator
    type
    ipconfig /flushdns
    I fixed mine after giving up so don't give up and don't feed the "unplug it" and "hit buttons at a certain point trolls".
    Good Luck.

Maybe you are looking for

  • Print the Screen from Mobile App

    Hi All, As i am creating the new Syclo Mobile application for iPad, and in that i need to print the screen from the application, is it possible to do that or else i need to store in any type of the file then transfer to mail and then prin the documen

  • Crazy problems after upgrading to Leopard.  Can you help?

    I have a PowerMac G5, 1.8 dual processors. It came with 256MB of RAM, which I removed and replaced with 2GB of Crucial RAM soon after purchasing the computer nearly four years ago. I added a 250GB Maxtor hard drive to the 60GB original two years ago.

  • I tried to invoke WS from BPEL process

    I tried to invoke WS from BPEL process. And error occurred when I deployed the process. Error: [ERROR ORABPEL-10902]: COMPILING FAILED. [NOTE]: IN "bpel.xml", XML syntax analysis failed. The reason is "Part Element not defined". In "http://192.168.0.

  • How do I get itunes 11 to sync my ipod nano? Itunes error message says ipod cannot be synched.

    My ipod is recognized in Windows but itunes won't synch thwe ipod nano. An error message says "The ipod "name of my ipod" cannot be synched. The required folder cannot found. The first time I downloaded itunes 11 it didn't install but it completely u

  • In need of a de-esser that works in GarageBand on a Mac Pro...

    Hey all! I upgraded to a Mac Pro about a month ago and have been loving it. But the free de-esser I used to use for vocals recorded into GarageBand (via my condenser mic), "spitfish," has no Intel version and never will. I've scoured the web and come