IPOS has crashed when I tried to put latest software update on it

I have an 18 mo old Touch.
I tried to put the latest software update on it so that I could start using apps.
It crashed. The Touch itself has an Apple showing, with a status bar under it that will not move. It was thus last night, and I left it last night thinking it would finish the status update by the time I woke up. Nope.
I tried rebooting the Touch twice. Same thing shows up.
Oddly enough, there appear to be songs on it, because when it is hooked to iTunes I can see its library on iTunes and play including vids. The screen of the Touch itself has the Apple and status bar = crashed.
Help?

I am having the same problem! Mine is the same age (about 18 mos). Totally *****! I have gone back and forth to the Box Store I bought it at and had the "geek guys" restore it. They are able to restore it to 2.2.1
This happens every time I attempt to download the latest firmware for my iTouch.

Similar Messages

  • TS3694 what does error 3194 in itunes mean? i am trying to restore my phone it crashed when i tried doing the new iphone update

    my phone crashed when i tried updating it. it then gave me error code 3194 in itunes when i tried to update it

    http://support.apple.com/kb/TS3694#error3194

  • I am being asked for an old Appled ID when launching Apps following the latest software update.

    AAfter the latest software update on my iPad, I'm being asked to sign in to an old Apple ID when launch Apps. How do I fix this without deleting and downloading the Apps again? I have had Apple ID problems with this software version.

    IF you still have the email address that you used for th old ID, you should continue to use that ID. Purchases are always tied to the ID that was used to make the purchase. Any problems that you are experincing with the iOS should have no bearing on your Apple ID and the ID doesn't have any effect on what is going on with the iOS.
    If you can be more specific as to what the problem is, maybe someone can help.

  • Getting this error when trying to run latest software update on MacBook Pro

    Everytime I try to run the update, it starts to download and then I get this error:
    The operation couldn’t be completed. (NSURLErrorDomain error -1102.)(102)
    I'm not too sure what it means, or how to fix it. If someone could help me out, that would be great!
    Thanks!

    You might try this:
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Then download and install: OS X Mountain Lion Update v10.8.5 (Combo).

  • When i tried to install latest itunes update I lost my connection to itunes I have tried eveything I knowto do, including deleting software and try to reinstall .  I ger R 6034 c runtime library incorrectly

    I tried to download upgrade to itunes last night 1/28/2014 and I receive an error message.  I then tried to use itunes and it would not work.  I have not tried everything i can think of and including deleting itunes solfware and reinstalling it.  It will not reinstall.  i get the message R6034 C runtime library incurrectly.
    Help!

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Ipod toch has froozen from me trying to stop the software update !

    i accidentally started the i0S5 .1 the last time it ened up erasing all my music and apps so i try to stop it from going through and in the process it freezed my itouch leaving a blank white screen. So my question is how long will it be before it unfreezes or is it something i can do that can help speed things up, and finally will this end up with my apps and music being deleted again?

    - Yu can try a reset:
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - And if necessary, connect to computer and restore via iTunes.
    - Next let the battery fully draon. After charging for an hour try the reset and resore again.
    If you do the update on your syncing computer and all media (apps music, synced photos etc, are on the computer/in iTunes library of tha computer then doing update will result in nothing lost.

  • HT1414 my i phone 3g seems to of crashed when i tried to reset it. it jus shows an apple i con in middle of screen and it wont turn off but it flicks off itself but returns to same apple icon. anyone know whats up with it or how to restor it please?

    my i phone 3gs seems to of crashed when i tried to restart it. the screen jus displays an apple i con in the middle of the screen and wont turn on or off. anyone know whats wrong with it or how to restore it?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

    have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
    The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
    I have tried to do the disk verify and repair but this has made no difference.
    Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

    If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
    If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
    If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here.  Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

  • HT201210 why is there an error occurring when trying to do a software update ios6 on iphone 4s

    why is there an error occurring when trying to do a software update ios6 on iphone 4s??

    You might find this article helpful: http://support.apple.com/kb/TS3694
    It has the error range of 3000's which states
    Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. Error 3194 most likely indicates you do not have the latest version of iTunes installed Update to the latest version of iTunes. 

  • When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?

    When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?

    asifmanzoor wrote:
    i have 10.7.2, this download is 10.7.5
    Are you Downloading it from here  >  http://support.apple.com/kb/dl1582
    asifmanzoor wrote:
    yes, i am using wifi
    1)  Turn your Wi-Fi router OFF... wait 30 seconds... Turn it back ON.
    OR...
    Do not use Wi-Fi and connect Directly to your Internet via ethernet cable.

  • Help apple help me, at first I was new to iphone registration 1 apple ID account but because I hardly use icloud account. so I do not remember the password and login name, my computer crash when I decided to run the software on ios7.1, but do not expect m

    help apple help me, at first I was new to iphone registration 1 apple ID account but because I hardly use icloud account. so I do not remember the password and login name, my computer crash when I decided to run the software on ios7.1, but do not expect me to be locked iclou account, I hope this mail unlocked apple for my apple account. I'm currently using the machine iphone 5, IME: ********. thank you ... ask yourself? machine is in warranty period warranty icloud error not send mail to me at mail
    <Personal Information Edited by Host>

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • When trying to edit a photo, it disappears (black screen) or screen is full of lines. Is this a bug with the latest software update?

    After updating with the latest software, when trying to edit a photo, it disappears (black screen) or screen is full of lines. If I blindly crop or edit the photo, when I exit edit mode, those changes have been made, but obviously this is unacceptable. Is this a bug with the latest software update?

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help: As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • HT4623 I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

    I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

    Hi there KrisonCastillo,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W.

  • HT201210 hi i just bought my new iPhone 4s yesterday and when u opened it was not updated so when i tried SO MANY TIMES to update it on the devise and on my new mac it said that there was a unknown error please help me :)

    hi i just bought my new iPhone 4s yesterday and when u opened it was not updated so when i tried SO MANY TIMES to update it on the devise and on my new mac it said that there was a unknown error please help me

    Please tell us what kind of computer you have, what operating system and what version of iTunes. Not just "the latest version of iTunes", the exact version number.

  • I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectal

    I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectedly. iTunes microsoft word all of them quit unexpectedly. Help!

    Exact same problem with my 2010 MBP 2.4ghz 4gb ram 10.6.8. iTunes said update was needed, Software Update ran with various updates including a security update, truthfully didn't pay much attention, I always install the Apple updates. After the restart it took 3-4 times longer than normal to get to the login screen, same to get to the desktop but I'm familiar with that occurring on update restarts. Unfortunately it got worse from there. Performed a full shutdown and startup. Same long boot.  After the desktop finally loads every mouse button press received a 2 minute beachball. I use menu-meters and both processors are under 10%. Waited a few minutes for disk utilities to launch, repair permissions estimates 3 hours for a typical <10 minute process. Activity monitor shows nothing over 10% CPU most of the time however ReportCrash pops to the top often. Any suggestions would be greatly appreciated. BTW zero problems until this update.

Maybe you are looking for