IPP printer migration has strange behavior

We have PM from the 6.5 suite. We set up a template to migrate printers, My Documents, and bookmarks. It collects the DNA correctly. when it restores it (Windows 2000 to Windows 2000, or Windows 2000 to Windows XP), everything comes back...EXCEPT we get a shortcut on the desktop that says "Reconnect ipp/..." which points to the ipp printer that was collected. When you click on this shortcut, the Add Printer wiz starts.
IF you REBOOT after the DNA restore without clicking on this shortcut, it will disappear when the customer logs in, but then the Add Printer starts automatically. If you CANCEL the add printer, everything works fine, and the ipp printer is present and correctly installed.
Is this correct behavior? How do I eliminate the shortcut/add printer wizard from starting since it appears it is not needed?
thanks
Jeff Ferris
Network Manager
512.239.1041
[email protected]

Jeff,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

SQL query has strange behavior on sql server 2014

Hi All,
I have a very weird situation where a front end entity framework query (cannot be modified easily) made up of SQL views that are used in subquery format. It generally runs within few seconds but there are times in the day when query just keep on going and
sometimes start spitting results very slowly and at other times no result but keep on executing. Sysprocesses table shows sos_scheduler_yield wait type when query is running and not returning results. This behavior started on the query since the database was
upgraded (migrated) from sql 2005 clustered enterprise instance to a new 2014 Enterprise clustered instance on a very powerful server. This query is used by a batch process and what I have found that if we rebuild indexes on the database (takes
only 2 mins) , the query appears to be returning results as expected. No other solution is working at the moment. The query had no issue on older sql 2005 instance and I have tested it their a few times. I am assuming it is a SQL 2014 related issue and found
a fix on CU 5 for sos_scheduler_yield but it has not fixed the issue. At this point SQL 2014 is on latest CU 6 as of last week and index rebuilt wis the only viable work around to get the query going without interruption.
Has anyone faced this issue on SQl 2014 or have some suggestions I can try. I can reproduce this error on at least two instances on SQL 2014. I have even tried setting max dop at server level to 1 and at half the total processors cores but to no avail. There
is a 750GB memory on the box.
Thanks
dba60
dba60

First of all, SOS_SCHEDULER_YIELD has nothing to do with the query as such. SQL Server has a co-operative operating system, which means that processes voluntary yields to permit other threads to executes. This sends them to the wait state SOS_SCHEDULER_YIELD.
If there is no other process executing, they are directly back in the game.
The problems with your query is most likely to be an issue with the query plan. It is not uncommon to see plan changes when you move from one version of SQL Server to another because of changes in the optimizer.
As Satish says, SQL 2014 has a new cardinality estimator (CE), which certainly can change the game. Check the compatibility level of the database. If the compat level is 120, you are using the new CE, else you are using the old one.
If the level is 120, the first check is to change it to 110 to see if this has any effect.
But in the end you will have to work more with the query. Analyse it to see if it can be improved by adding indexes. You say said that this query generated by Entity Framework. Unfortunately, this is an indiciation of that the query is not the best and could
serve from a rewrite.
The ultimate rescue would be to freeze the plan when it runs well. I have some text about this here:
http://www.sommarskog.se/query-plan-mysteries.html#planguides
Erland Sommarskog, SQL Server MVP, [email protected]

JPA Entity persistance has strange behavior

Hello all,
Well first off I apologize if this is in the wrong place as I am not using J2EE but J2SE with JPA and Spring 2.0. My issue is very simple but also very strange and I am unable to diagnose the problem. What I have is a method that persists an object after it has been created from a web form. The object has been Validated and there are no errors. When I call the method from one place in my code it doesn't work at all, however when I call the method from a different place it works perfect. I have used my debugger to check the objects and from what I can tell everything is identical each time the method is called. The other strange part is there is no Exception thrown at all it just doesn't save to the DB. Please let me know if you need more information or would like me to post some code. Any information anyone can provide or point me to is greatly appreciated.
Justen.

Ahh yes, I didn't realize that I was using a different service class for my "cycle" entity and didn't set up any of my transaction stuff in my config file, but I had for my other service class that the "item" and other entities use. Thank you very much this fixed my problem.

Group by Cover view has strange behavior

I've got a bunch of MP3s from the SXSW Showcased Artist music downloads that go out every year. When organizing by Album under the group by cover view, all of the album entries decide that they want to be segregated by artist as well.
This completey breaks the functionality of the group by cover feature as now I have about 1000 intermittent entries in my library.
For other albums with several artists listed, there is no issue.
Anyone know what's causing this fruity behavior?

It sounds like you don't have compilation checked in the album options, therefore reading each artist as a separate release? Not sure as I haven't fiddled with the new Itunes yet, but I'd have similar problems with arranging my files in Itunes 6. Hope that might help.

AutoDynamicStreamSwitch has strange behavior

I have an F4M file playing through my mediaPlayer and the autoDynamicStreamSwitch property set to true. I also have the DynamicStreamEvent.AUTO_SWITCH_CHANGE listener applied to my mediaPlayer. I have a break point set up for my listener function but it never fires (hence, indicating a stream switch). If I trace out mediaPlayer.currentDynamicStreamIndex it shows that it switches from stream 0 to stream 5 (only stays on 5 briefly) and then it switches back to stream 0.
So, two questions. 1) Do I have my stream switching listener set up correctly? 2) Why does it only switch between the highest and lowest stream and not the streams in between?
I can provide more details if needed. Thanks!

There is a bug with live stream switching in OSMF, for which I implemented a work-around in StrobeMediaPlayback:
http://sourceforge.net/adobe/smp/svn/LATEST/tree/trunk/player/StrobeMediaPlayback/src/org/ osmf/net/RTMPDynamicStreamingNetLoaderAdapter.as
The workarround simply removes the InsufficientBufferRule for live streams (see line 80),
We will contribute all the work-arounds implemented in our player back to the OSMF once we sync with the OSMF trunk.
Hope this helps,
Andrian

Strange behavior on my network... Has my home system been compromised? A disgruntled employee (sysAdmin) could have full access...worried...

I have been experiencing a lot of strange behavior on my home network ever since a disgruntled employee was let go. He was a server admin and had root access to my home network - where I run my business. I am getting a ton of span now, my websites were all infected with xss hacks, and many of my accounts are blacklisted. I did a clean install and DoD erase pass on my hardware, but I still see a lot of errors and my hosts file and VMs look very odd. not to mention the extremely odd loops in my ifconfig... Any help?
Here is an output of 'ifconfig'
(FYI, I am a software dev, so feel free to speak the jargon and ask for specific things)
(I hid any identifying info with either xx or my:ma:ca:dd:re:ss or something like that)
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=3<RXCSUM,TXCSUM>
    inet6 ::1 prefixlen 128
    inet 127.0.0.1 netmask 0xff000000
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>
    ether th:is:ad:dr:es:s1
    inet6 fxxx::xx2a:xxff:fxxx:fxxx%en0 prefixlen 64 scopeid 0x4
    inet 10.xx.xx.x netmask 0xffffff00 broadcast 10.xx.xx.xxx
    nd6 options=1<PERFORMNUD>
    media: autoselect (1000baseT <full-duplex,flow-control,energy-efficient-ethernet>)
    status: active
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether th:is:ad:dr:es:n1
    inet6 fe80::e2f8:47ff:fe29:6ec2%en1 prefixlen 64 scopeid 0x5
    inet 10.xx.xx.x netmask 0xffffff00 broadcast 10.xx.xx.xxx
    nd6 options=1<PERFORMNUD>
    media: autoselect
    status: active
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
    lladdr 70:cd:xx:ff:fe:xx:xx:xx
    nd6 options=1<PERFORMNUD>
    media: autoselect <full-duplex>
    status: inactive
en2: flags=8922<BROADCAST,SMART,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether my:wi:fi:ma:ca:dd
    media: autoselect <full-duplex>
    status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=63<RXCSUM,TXCSUM,TSO4,TSO6>
    ether th:is:ad:dr:es:mtu
    Configuration:
        id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
        maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
        root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
        ipfilter disabled flags 0x2
    nd6 options=1<PERFORMNUD>
    media: <unknown type>
    status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
    ether th:is:ad:dr:es:p2p0
    media: autoselect
    status: inactive
vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:50:56:c0:00:01
    inet 192.168.48.1 netmask 0xffffff00 broadcast 192.168.48.255
vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:50:56:c0:00:08
    inet 192.168.219.1 netmask 0xffffff00 broadcast 192.168.219.255
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1396
    inet my.ded.vpn.xx --> 192.xxx.xxx.xxx netmask 0xffffff00
nooooooo:~ cearnhart$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=3<RXCSUM,TXCSUM>
    inet6 ::1 prefixlen 128
    inet 127.0.0.1 netmask 0xff000000
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>
    ether th:is:ad:dr:es:s1
    inet6 xxx::xxxx:xxff:xxxx:fxx2%en0 prefixlen 64 scopeid 0x4
    inet 10.xx.xx.x netmask 0xffffff00 broadcast 10.x.x.xxx
    nd6 options=1<PERFORMNUD>
    media: autoselect (1000baseT <full-duplex,flow-control,energy-efficient-ethernet>)
    status: active
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether th:is:ad:dr:es:n1
    inet6 fxxx::xxf8:47ff:fxx:6xx%en1 prefixlen 64 scopeid 0x5
    inet 10.x.x.x netmask 0xffffff00 broadcast 10.x.x.xxx
    nd6 options=1<PERFORMNUD>
    media: autoselect
    status: active
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
    lladdr xx:xx:xx:ff:fe:xx:5f:xx
    nd6 options=1<PERFORMNUD>
    media: autoselect <full-duplex>
    status: inactive
en2: flags=8922<BROADCAST,SMART,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether xx:00:1e:xx:xx:xx
    media: autoselect <full-duplex>
    status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=63<RXCSUM,TXCSUM,TSO4,TSO6>
    ether th:is:ad:dr:es:mtu
    Configuration:
        id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
        maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
        root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
        ipfilter disabled flags 0x2
    nd6 options=1<PERFORMNUD>
    media: <unknown type>
    status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
    ether th:is:ad:dr:es:p2p0
    media: autoselect
    status: inactive
vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:50:56:c0:00:01
    inet 192.168.48.1 netmask 0xffffff00 broadcast 192.168.48.255
vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:50:56:c0:00:08
    inet 192.168.219.1 netmask 0xffffff00 broadcast 192.168.219.255

If you know or suspect that a hostile intruder has either had physical access to it, or has been able to log in remotely, then there are some steps you should take to make sure that the computer is safe to use.
First, depending on the circumstances, computer tampering may be a crime, a civil wrong, or both. If there's any chance that the matter will be the subject of legal action, then you should do nothing at all without consulting a lawyer or the police. The computer would be the principal evidence in such a case, and you don't want to contaminate that evidence.
Running any kind of "anti-virus" software is pointless. If I broke into a system and wanted to leave a back door, I could do it in a way that would be undetectable by those means—and I don't pretend to any special skill as a hacker. You have to assume that any intruder can do the same. Commercial keylogging software—which has legitimate as well as illegitimate uses—won't be recognized as malware, because it's not malware.
The only way you can be sure that the computer is not compromised is to erase at least the startup volume and restore it to something like the status quo ante. The easiest approach is to recover the entire system from a backup that predates the attack. Obviously, that's only practical if you know when the attack took place, and it was recent, and you have such a backup. You will lose all changes to data, such as email, that were made after the time of the snapshot. Some of those changes can be restored from a later backup.
If you don't know when the attack happened, or if it was too long ago for a complete rollback to be feasible, then you should erase and install OS X. If you don't already have at least two complete, independent backups of all data, then you must make them first. One backup is not enough to be safe.
When you restart after the installation, you'll be prompted to go through the initial setup process for a new computer. That’s when you transfer the data from a backup in Setup Assistant.
Select only users in the Setup Assistant dialog—not Applications, Other files and folders, or Computer & Network Settings. Don't transfer the Guest account, if it was enabled.
Reinstall third-party software from original media or fresh downloads—not from a backup, which may be contaminated.
Unless you were the target of an improbably sophisticated attack, this procedure will leave you with a clean system. If you have reason to think that you were the target of a sophisticated attack, then you need expert help.
That being done, change all Internet passwords and check all financial accounts for unauthorized transactions. Do this after the system has been secured, not before.

Report FP_TEST_00 - Strange behavior

Hello Gurus,
A strange behavior with report FP_TEST_00 occurs:
SA38 --> FP_TEST_00 --> select a device --> execute --> print preview then and error or popup is show:
Adobe Reader
Error initializing the font server module
Then the SAP GUI is closed, I check the ST22 and no dump is generated and in transaction SM21 only appear:
DP Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
DP Q0 I Operating system call recv failed (error no. 232 )
The #1 log entry: *
Details Page 2 Line 28 System Log: Local Analysis of sapdev                   1
Time     Type Nr Clt User TCode Grp N Text
11:37:20 DP                     Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process    User...... Terminal Session TCode Program Cl Problem cl         Package
11092      Dispatcher                                           K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text..........              Caller.... Reason/cal
dpxxdisp   1223 551 ADMIN       86 HUSVP-SAP-BA DpRTmPr    NiBufRe
Documentation for system log message Q0 4 :
The SAP Dispatcher (part of the application server) has lost the
connection to a terminal process. For example, this happens when the
terminal program (GUI) terminates without correctly logging off the
application server. More detailed information about the error
context is not available here.
Technical details
File Offset RecFm System log type             Grp N variable message data
   21 254340 m     Error (Function,Module,Row) Q0 4 551 ADMIN       86 HUSVP-SAP-BA     DpRTmPrNiBufRedpxxdisp1223
The #2 Log show: *
Details Page 2 Line 29 System Log: Local Analysis of sapdev                   1
Time     Type Nr Clt User TCode Grp N Text
11:37:20 DP                     Q0 I Operating system call recv failed (error no. 232 )
Operating system call recv failed (error no. 232 )
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process    User...... Terminal Session TCode Program Cl Problem cl         Package
11092      Dispatcher                                           K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text        Caller.... Reason/cal
nixxi.cp   4435           recv232 NiIRead    recv
Documentation for system log message Q0 I :
The specified operating system call was returned with an error.
For communication calls (receive, send, etc) often the cause of errors
are network problems.
It could also be a configuration problem at operating system level.
(file cannot be opened, no space in the file system etc.).
Additional specifications for error number 232
Name for errno number ECONNRESET
No documentation available for error ECONNRESET
Technical details
File Offset RecFm System log type             Grp N variable message data
21 254520 m     Error (Function,Module,Row) Q0 I           recv232                     NiIReadrecv   nixxi.cp4435
Edited by: Hernando Polania Cadena on Feb 25, 2010 8:36 PM

Hello All,
I applied the solution in page
http://wiki.sdn.sap.com/wiki/display/PLM/Adobe%209%20-%20SAPGUI%20crash
Works OK
Thanks
Hernando

Strange behavior in Financial Reports (drop down feature)

Hello Gurus,
I have currently performed migration of Financial Reports from 11.1.1.3 environment to 11.1.2.2 environment with the help of a staging environment.
We migrated the reports over to 11.1.2.2 using LCM from the Staging 11.1.2.2 environment.
We are observing some strange behavior with the Financial Reports that have drop down functionality in our new environment.
When we open a report in our current environment (113) and select a particular member (India) from the Page dimension(Page has almost 30 members in it) it returns appropriate data, however when the same report is opened in new environment (122) and when we select the same member(India), it does not return appropriate data(Page has almost 30 members in it).
However if we design a sample report with the same member in the page (Page has only 1 member (India)) and then open the report it shows correct data.
So the issue occurs only when we have more than 1 members in page and it works as expected when we have only 1 member in page.
Any help would be highly appreciated.
Thanks,
hyperionEPM

Hello Neeraj,
We are trying to understand the potential reason as to why is it causing this. Is there anything similar caught in .303 patch?? I will have a look at the .303 patch readme.
Thanks,
hyperionEPM

Strange behavior of system with enabled FileVault2, Roaming profile

Hello,
I have encountered strange behavor of my Macbook Air after some testing.
Macbook Air 2012 was newly installed with 10.8.4 and joined network account server on 10.8.4 server with Roaming profile (synced with server home directory). After installing some basic apps like iWork I turned on FileVault.
Then I start to have the strange behavior - iWorks are not displaying content of document - it seams blank - just white screen without any borders where should be at least lines in numbers or empty cells.
Another display problem is in Safari. On same pages (even default Top SItes) it`s flashing and especially when scrolling.
Did you encountered something similar? I`m not able to get rid of it.
Computers was used for some time before turining on FIle Vault and problem started to occur after this action. Disabling of FileVault didn`t helped (properly restarted between steps).
I didn`t found anything strange in Console or elsewhere..

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Strange behavior of GetStringUTFChars in Linux

Good evening!
I made an implementation of a native method in C++ for Windows and Linux, in windows it works fine, but in Linux I have a strange behavior of GetStringUTFChars here is the piece code :
JNIEXPORT jint JNICALL Java_MyNativeMethod
(JNIEnv *env, jobject obj, jstring IpAddress) {
const char * ccpIpAddress = env->GetStringUTFChars(IpAddress, 0);
jsize size = env->GetStringLength(ccpIpAddress);
trace("IpAddress : %s size: %d", ccpIpAddress, size);
Absolute normal... but when I pass as parameter a string '192.168.1.11'
I receive from 'IpAddress : HBĽ1 size: 0' to 'IpAddress : P9D7D6DwD�MS\H#M\H : 251'
I made a little and simple test to print a String to verify if is Linux problem but IT WORKED FINE!
I've notice that the differences between both programs are that the wrong one has been linked with a C lib, but the #define __cplusplus is OK also, and all the compile process use C++ code...
This is my compilation line
g++ -o lib{myLib}.so {myImpl}.cpp lib{C li}.so libstdc++.so -I {JAVA_HOME}/include/ -I {JAVA_HOME}/include/linux/ -shared -static -L{JAVA_HOME}/jre/lib/i386/
(variables put for clarity) and (I tried with gcc also)
the libstrd++.so is been used in my simple test link options too.
I was wondering if there is some -Doption which should be defined that
functions->GetStringChars(this,str,isCopy); implementation ask for...
or if the link with a C code is messing the things in a different behavior
Thanks for the help
Pedro Ribeiro
Sao Paulo - Brazil

JNIEXPORT jint JNICALL Java_MyNativeMethod
(JNIEnv *env, jobject obj, jstring IpAddress) {
const char * ccpIpAddress = env->GetStringUTFChars(IpAddress, 0);
jsize size = env->GetStringLength(ccpIpAddress);
trace("IpAddress : %s size: %d", ccpIpAddress, size);
=====================
You tried to get the string length of C character array.
I think you can get the length of jstring alone.
Please advice me if I am wrong

Strange behavior when compiled with Visual C++ 2005 Express Edition

I wrote a program for Berkeley DBXML 2.2.13 on Windows XP that executes a query 5 times and prints out the runtime for each execution. When I run the program using the Debug version of the libraries the queries take about the same time to execute for all 5 executions. When I run the program using the Release version of the libraries the execution time of the queries degrades significantly between each execution. One query takes 2 seconds to execute the first time and 20 to execute the last. I have tried recompiling the Release version without optimization and the strange behavior persists. I have run both the Release and Debug versions several times and gotten the same results, so I doubt it is a program running in the background that is slowing the execution.
This behavior does not happen when I compile the program under Unbuntu using g++, so I assume it is caused by some flag set in the Release version of Visual C++. Has anyone else experienced this behavior and know what flags I should or should not set?
Thanks for your time.
Lauren

Hi Lauren,
We've had users experience this before, and it seems to be a bug/"feature" of the default windows heap allocator. Please see this post for a bit more explanation and a solution:
Re: Performance Issue caused by XmlResults.next().asString();
John

Network printing: ipp "printer is busy"/LPD and AppSock prints garbled data

Dear all,
After months of trying on and off, I give up - I need help please. Since upgrading to Leopard, then Snow Leopard, I cannot print to the office computers. Windows or IPP printer settings produce the "printer is busy - wait 15 seconds" etc error message; LPD and AppSock printer settings enable data to get through, but the output is garbled text (the Adobe Postscript 3 engine on the printer isn't happy, obviously).
We have some new colour copier/printers from FujiXerox (FX Docucentre IV C3370) and some older Canon laser printers (LBP5600), but they don't offer Bonjour connectivity and I am stuck. I can ping them, I have the latest drivers, but nothing works. They worked fine in OS10.4 on this same computer, and XP and Windows 7 of course in BootCamp, but nothing in OS10.5 or 10.6.
I've been all over the web and through the Discussions forums and tried all the suggestions I can see, to no avail. I've tried KeyChains to carry by login ID and password to the machines, and deleting/adding printers through both the System Preferences and the CUPS interface, but I confess I am stuck. I currently copy all of my documents every day to a Dell desktop on my desk just to print them out.
The Canons are run through a Windows server, the FujiXerox has a standalone IP address and no separate print queue at the moment. Running OS10.6.2 on MacBook Pro. I'm happily connected to the network and can access all sharepoints and servers, I just can print to any of the printers - it's infuriating.
Is it a Firewall problem? Sub-net problems? Any ideas most welcome, thanks for looking and sorry if I've missed out anything important.

MacJapan wrote:
After digging around I found the Windows drivers are ART EX drivers; obviously that doesn't really come in Macintosh flavour, but FujiXerox do have a non-postscript driver for the machine which I downloaded. This time I could connect via LPD, as FujiXerox recommend, but the print job stalls at the spooling stage; the error message reads that the 'Library/Printers/FujiXerox/Filter/FXPSACMMFilter.bundle/Contents/MacOS/FXPSACM MFilter' failed.
The filter bundle crashing could be related to permissions on the filter or a result of using a 32bit driver with a 64bit application.
For the permissions, you could opening Terminal and entering the following text;
sudo chown -R root:wheel /Library/Printers/FujiXerox/Filter/
then press ENTER. You will be prompted to enter you user name and password. The user name needs to be an account that has admin rights to the Mac.
Exit Terminal and restart the Mac. Now try printing again.
Regarding the 64bit apps, these are the included SL apps like Preview, TextEdit and Safari. If you attempted to print with one of these apps when you got the error, you could try forcing the app to open in 32bit mode. This is done with the application closed. Locate the app with Finder and do a Get Info on the package (icon). There will be the option to 'Open in 32bit mode'. Select this, close the Get Info window and open the app. Now try a print.
Regarding the Non-Postscript driver, looking at the FJ drivers web site, there are two of these drivers available. Both are showing as version 1.1, but the dates are different. Have a look at the following link to see if you have the one with the most recent date.
http://onlinesupport.fujixerox.com/setupDriverForm.do?ctrycode=AU&lang_code=en&dlang=en&pid=DCIVC3370
Greg's suggestion to use the Generic PCL is also a good alternative. One thing I did find however with the PCL5c is that it does not print in colour, even though it would suggest it does based on the name (the c normally indicates colour).
Did you get the Canon LBP printing?
Pahu

Strange Behavior with gMSA in Server 2012 R2

Greetings,
I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
self-managed environments.
We created a Group Managed Service Account using the following article:
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
and I believe that the strange behavior I am seeing may have something to do with this - described below:
As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
attached).
I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
Nick

VIvian,
Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
Test-AdServiceAccount : The server has rejected the client credentials.
At line:1 char:1
+ Test-AdServiceAccount gMSA$
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
    + FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
   ctiveDirectory.Management.Commands.TestADServiceAccount
If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
True
Is this normal?
Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
you think there is something wrong with my gMSA accounts based on the information I have provided.
Nick

Strange Behavior from iTunes 7.2

Running itunes - 7.2Recently had my itunes library “corrupted” or non functional.
Spent a long, long time rebuilding the library (see below) and noticed some strange behavior that has me terrified that itunes is corrupted and I am going to loose all the hard work, etc..
1. I have about 100 GB of music in various formats (apple protected/itunes store, mp3 (128 to 320), apple lossless, wav) and when I tried to rebuild the library by clicking on add to library it only added about 65 GB of the 100 GB. I had to go through and figure out what was missing and manually choose the specific folder when I added it.
Major pain and very time consuming.
So it is not adding songs correctly, but through way too much effort able to work around this.
2. About ½ of the itunes store tunes I purchased are no longer apple protected format. Somehow they were converted to mp3 at 192kbs. Some of the songs play fine others are now not as crisp and make a poping sound or skip. How could this happen? Are these files corrupted? Will I loose them?
3. At the top center of itunes the information bar, where the read out is for what song is playing and how much time has elapsed in the song, is not working. When I click on a song it starts playing but the elapsed time bar and counter never move, and when the next song starts playing the information never changes. It is stuck on what ever song you initiate play with by clicking on it and the information stays frozen.
4. itunes randomly stops playing at the end of a song….If listening to an album it is usually after three or four songs and when listening to a play list it is usually after one song.
I am afraid itunes is corrupted and will not function correctly and I am going to loose the hard work I put in trying to recover from the last crash.
Any suggestions??
Can’t wait for time machine. I hope it works as advertised. If so I could just go back in time to the last time iTunes worked correctly and go from there.

First of all I hope that you have a good b/u of all your tunes - either on ext HD or on DVD. Don't forget to b/u the iTunes Library and .xml files at the same time.
Have you tried to reinstall iTunes? Drag the app to the trash and remove the iTunesX.pkg from HD>Library>Receipts>iTunesX.pkg. Using a fresh .dmg of iTunes 7.2 reinstall.
Have you repaired permissions with Disk Utility?
Is your Quicktime up to date? At least version v7.1.5.
MJ

Strange behavior with Zoom and Image control

HELP - I have a strange behavior (bug?) with using Zoom
effect on an Image that has been placed on a Canvas. I am using
dynamically instantiated images which are placed on a canvas inside
a panel. I then assign a Zoom IN and Zoom Out behavior to the
image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
is that the image jumps around on the Zoom OUT and lands on a
random place on the canvas instead of coming back to the original
spot. This is especially true if the mouse goes in and out of the
image very quickly. HELP -- what am I doing wrong? Computer = Mac
OS X 10.4.9 Flex 2.0.1
Here's a simple demo of the bug -- be sure to move the mouse
in and out rapidly:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="setUp();">
<mx:Script><![CDATA[
import mx.events.EffectEvent;
import mx.effects.Fade;
import mx.effects.Zoom;
import mx.rpc.events.ResultEvent;
import flash.display.Sprite;
import mx.core.UIComponent;
import mx.controls.Image;
private var zoomIn:Zoom;
private var zoomOut:Zoom;
private function setUp():void {
var image:Image = new Image();
image.id = "album_1_1";
image.x = 200;
image.y = 200;
image.width = 64;
image.height = 64;
image.source = "
http://s3.amazonaws.com/davidmccallie/album-128.jpg";
image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
myCanvas.addChild(image);
zoomIn = new Zoom();
zoomIn.zoomHeightTo = 2.0;
zoomIn.zoomWidthTo = 2.0;
zoomIn.captureRollEvents = true;
zoomIn.suspendBackgroundProcessing = true;
zoomOut = new Zoom();
zoomOut.zoomHeightTo = 1.0;
zoomOut.zoomWidthTo = 1.0;
zoomOut.captureRollEvents = true;
zoomOut.suspendBackgroundProcessing = true;
private function doZoom(event:MouseEvent):void {
var image:Image = Image(event.currentTarget);
if (event.type == MouseEvent.ROLL_OVER) {
zoomIn.target = event.currentTarget;
zoomIn.play();
} else if (event.type == MouseEvent.ROLL_OUT) {
zoomOut.target = event.currentTarget;
zoomOut.play();
]]>
</mx:Script>
<mx:Panel width="100%" height="100%"
layout="absolute">
<mx:Canvas id="myCanvas" width="100%" height="100%">
</mx:Canvas>
</mx:Panel>
</mx:Application>

There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect?

IPP printer migration has strange behavior

Similar Messages

Maybe you are looking for