IPP printing with password

Hello.
I use IPP Printing with Password.
When I set up IPP Printer,I must input my domain account password
The Password was recorded in printer port setting.
When I Print with IPP Printer,I do not need to input my domain password
But when I change domain password , my printer port password was not change!.
Is there a way that
after I change the domain password,
give a pop to password
change when you were IPP printing?
Or, Is there a way to enter
a password every IPP printing?
Regards.

Hi,
It should have something to do with authentication setting on printer server.
To get more effective help, please redirect to Windows server forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverprint&filter=alltypes&sort=lastpostdesc
Thanks!
Andy Altmann
TechNet Community Support

Similar Messages

Print with password from ERP-System

Hello,
I am looking for a way to print from a erp-system with a password.
This means:
I have a printer in my office where I can configure a password.
When the user wants to print something from the erp-system he has to enter the same password which
is configured for the printer. It is only possible to print iif the user has the password.
Is there a similar way to do this in a erp system?
Best regards & Thanks in advance
Alberto

If you do frontend printing (which is basically like the user is printing from his PC) it works. If you print over the network from the spooler instance, it won't work.
Markus

IPad to wireless printer with password protected pdf files?

I have a iPad 2 connected wirelessly to a HP Photosmart 6520. I usually have no problem printing a variety of file and docs....including pdf files. My friend sent me some password protected PDF files today. I have the password and can open them just fine....but I can't get them to print. It just ignores me (no error message). Any suggestions?

FYI, in case anyone is interested, I found out what is going on.
I created the original password protected PDF using Microsoft Word. I did this because I do not have a full version of Adobe Acrobat that allows me to create files.
On a hunch, I found someone that has a full version of Acrobat, and had them create a password protected PDF file. This file worked perfectly.
Apparently, Word is not strictly adhering to PDF guidelines, and OBIEE senses the differences, resulting in the file not opening properly.
Something to keep in mind for anyone linking to password protected PDF files in OBIEE.

IPP printing and Oracle Report

Hi all,
I got reports error out when using IPP printer. It bursts out REP-177 and REP-713 errors in fact. Could anybody advice how-to use IPP printer with Oracle Report ?

10g is not support IPP, this implement on 11g Report

Is there a way to print a pdf, which is secured with password?

I want to know a way to print pdf which is secured with password to print without throwing a error ?
Instead it has to ask for a password and print..

we need to have an associated application installed in the system for that particular fileYup.
does javax.print api works for pdf files and word documents?Nope.
There is something called (I think) iText which can handle PDF documents. No idea whether it includes a printing facility or not.
db

Printing with IPP (SSL) and job user names

Hi,
Environment: Windows 2008 R2 Servers, WIN 7 and WIN 8.1 clients, all 64 Bit
I setup a printing environment including a FollowYou solution. To realize data encryption from end2end, we decide to use IPP over SSL for Printing. Everything works fin, IIS is installed, all certificates are in place and the necessary clients are enabled/
installed.
Because of the FollowYou solution, i need the origin user who sent the Job from his client via the print server to the printer. Thats where my problem is. I tried three ways to print from the client: SMB, IPP and IPP over SSL. Just if i use SMB, the username
is transferred correctly with the Job and can be seen in the job list in the stopped printer queue. Neither with IPP nor with IPP over SSL the jobname is coming with the job (i see nt authority/IUSR instead).
Is there something i can do to see the username within the job using IPP?
Thanks and regards,

You have posted your question in a user forum dedicated to Project
Server/MS project.
Also, looks like you have posted this question
here and got some answers. If anything, that is the correct forum to post further quuestions.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Trouble printing a password protected adobe document with hpeprint?

How do I print a password protected Adobe document with hpeprint? I have an Officejet Pro 8600Plus

Hi,
If password protected PDF documents, you can not print on ANY printer unless you can ccrraacckk it.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IPP / LPD Printing with HP Photosmart 6180

I've connected my HP 6180 to my home network and manually assigned it an ip address. I've been trying to print to it over the internet using IPP (port 631) or LPD (port 515) but have been unsuccessful. (I have a number of printers currently set up at both my office and home that can be printed to from anywhere, so I'm fairly familiar with this.)
When sending a print job, I'm always given the message "host server is busy, will retry in 30 seconds." Any idea why this isn't working? Is it that the HP 6180 doesn't support/allow printing over the internet? Is this a queue issue or driver issue?

Hi, I’m not having any problem adding the printer and printing on my home network (LAN) . . . in fact, I have no problem adding the printer for LPD or IPP printing using “myaccount.dyndns.info:port” . . . I can ping the device over the internet, but when sending a print job, I get the message "host server is busy, will retry in 30 seconds." I’m successfully doing this very set up/printing with four other printers using IPP (port 631) or LPD (port 515) but can’t seem to get the HP to work. There doesn't appear to be any option for HP IP or HP TCP/IP in the "select printer drivers" area.
If I understand you correctly, I need to download and install a CUPS-based driver for the Photosmart C8180?

Finger print reader will not work with password manager

i have the finger print reader working fine to log into windows but when i select advanced options for a password protected site in password manager,and custom security level ,when i click on protect with finger print,it says i have not enrolled any finger prints with client security solution,when i check the fingerprint tab in client security solution it shows my fingerprints what i have stored,why is this conflict happening?when i check my web email i want to be able to swipe my finger and log in not keep typing my password in,anybody know how to sort this??

Hi,
I have the same problem, help me please.
I have the 3000 N200 notebook, when I use the finger print to log on using the windows vista logon it work fine, but if I try to use it with ThinkVantage technology (such password manager) it told me that the device is not installed.
(Sorry for my english.)

Trouble with IPP printing

i added a printer to my list with IPP protocol (with IP address, no queue). After i sent a job to this printer, the job was stopped.
i set IPP protocol enable on Web page.
Printer driver is RICOH Aficio CX9000.
others, how to set the higest priority for ipp (for example, set '0' for ipp)
any ideas? Thanks in advance.

greg sahli, thanks for your help.
i only has one printer, and want to add it to my list by ipp. In the operation of adding it, set its ip address and give it a queue name. The printer is in the LAN, not connected to internet. Is that ok? Any other settings should be done?
Look for the queue name in the docs that come with
the printer. L1, P1, lp, lp1 are common ones.
Experiment - start with lp.
About "docs" and "L1, P1, lp, lp1", i can't understand well.
Could you explain them for me?
Thanks in advance.

IPP printing not working on Mavericks, but got it to work with LPD...

Hi,
Although I've already solved this problem, maybe someone else can use this fix...
I got a new MacBook with OSX Mavericks installed, but I was unable to get my printer to work. It's a Lexmark x203n, available as a network printer. It installed correctly, but printing didn't work. I saw the print job appearing in the print queue, however, the printer didn't respond to it.
On an older system, an iMac, it always worked, and on a Windows laptop I was still able to print, so the printer was not dead. I had already reinstalled my iMac with Mavericks, and the printer was not functioning there as well, so I expected that it was the OS.
When I wiped my iMac, and reinstalled a very old version of OSX (10.6, let it update to 10.6.6.*), I was able to print with it. Investigating the network traffic using Wireshark, I noticed that the older version used LPD, where Mavericks is using IPP.
In the printer settings page you don't see any details, so I couldn't compare them. However, I enabled the CUPS webinterface (on the terminal: $ cupsctl WebInterface=yes), and so the different connection ports. I changed the connection to what it is on the older version of OSX, and got it to work.
Working: dnssd://Lexmark%20X203n._printer._tcp.local.
Not working: dnssd://Lexmark%20X203n._ipp._tcp.local.
Maybe Apple Support can pick this up...
Cheers,
Ties

Please post it on apple.com/feedback to be sure someone from Apple reads it.
The two forms starting with " dnssd:// " mean that you just entered (or found) a different form of the URI to print via Bonjour. Not LPD vs IPP. Apple does need to see this and hear that one worked while the other didn't.

Network printing: ipp "printer is busy"/LPD and AppSock prints garbled data

Dear all,
After months of trying on and off, I give up - I need help please. Since upgrading to Leopard, then Snow Leopard, I cannot print to the office computers. Windows or IPP printer settings produce the "printer is busy - wait 15 seconds" etc error message; LPD and AppSock printer settings enable data to get through, but the output is garbled text (the Adobe Postscript 3 engine on the printer isn't happy, obviously).
We have some new colour copier/printers from FujiXerox (FX Docucentre IV C3370) and some older Canon laser printers (LBP5600), but they don't offer Bonjour connectivity and I am stuck. I can ping them, I have the latest drivers, but nothing works. They worked fine in OS10.4 on this same computer, and XP and Windows 7 of course in BootCamp, but nothing in OS10.5 or 10.6.
I've been all over the web and through the Discussions forums and tried all the suggestions I can see, to no avail. I've tried KeyChains to carry by login ID and password to the machines, and deleting/adding printers through both the System Preferences and the CUPS interface, but I confess I am stuck. I currently copy all of my documents every day to a Dell desktop on my desk just to print them out.
The Canons are run through a Windows server, the FujiXerox has a standalone IP address and no separate print queue at the moment. Running OS10.6.2 on MacBook Pro. I'm happily connected to the network and can access all sharepoints and servers, I just can print to any of the printers - it's infuriating.
Is it a Firewall problem? Sub-net problems? Any ideas most welcome, thanks for looking and sorry if I've missed out anything important.

MacJapan wrote:
After digging around I found the Windows drivers are ART EX drivers; obviously that doesn't really come in Macintosh flavour, but FujiXerox do have a non-postscript driver for the machine which I downloaded. This time I could connect via LPD, as FujiXerox recommend, but the print job stalls at the spooling stage; the error message reads that the 'Library/Printers/FujiXerox/Filter/FXPSACMMFilter.bundle/Contents/MacOS/FXPSACM MFilter' failed.
The filter bundle crashing could be related to permissions on the filter or a result of using a 32bit driver with a 64bit application.
For the permissions, you could opening Terminal and entering the following text;
sudo chown -R root:wheel /Library/Printers/FujiXerox/Filter/
then press ENTER. You will be prompted to enter you user name and password. The user name needs to be an account that has admin rights to the Mac.
Exit Terminal and restart the Mac. Now try printing again.
Regarding the 64bit apps, these are the included SL apps like Preview, TextEdit and Safari. If you attempted to print with one of these apps when you got the error, you could try forcing the app to open in 32bit mode. This is done with the application closed. Locate the app with Finder and do a Get Info on the package (icon). There will be the option to 'Open in 32bit mode'. Select this, close the Get Info window and open the app. Now try a print.
Regarding the Non-Postscript driver, looking at the FJ drivers web site, there are two of these drivers available. Both are showing as version 1.1, but the dates are different. Have a look at the following link to see if you have the one with the most recent date.
http://onlinesupport.fujixerox.com/setupDriverForm.do?ctrycode=AU&lang_code=en&dlang=en&pid=DCIVC3370
Greg's suggestion to use the Generic PCL is also a good alternative. One thing I did find however with the PCL5c is that it does not print in colour, even though it would suggest it does based on the name (the c normally indicates colour).
Did you get the Canon LBP printing?
Pahu

Unable to print with my Canon PIXMA IP 4700 and JetDirect network appliance

After many tries I decided to post my question.
I have a Canon PIXMA IP 4700 connected to the network with a Jetdirect 175X box. So I tried to add a new printer with a "HP Jetdirect Socket" port. I have previously installed the driver from the official website. The test page is staying on the spooler.
I also tried with LPD port (supported by the Jetdirect box) and IPP but nothing is working.
When the printer is directly connected with USB, it's working fine. Printing from my others Windows computers is working fine too since many months.
Thank your for your help.

Hello and welcome to Apple Discussions.
Your problem is being caused by the Canon driver. It cannot be used when the printer is connected to the USB port of a 3rd party print server, or if shared by Windows.
The solution is to use a driver like Gutenprint or PrintFab. Gutenprint is preferred because it is free (it ships with OS X) however the iP4700 is not listed as a supported model. The iP4600 is listed so you could try selecting this model in the Print Using menu (shown as Canon PIXMA iP4600 - Gutenprint v5.2.3). If the iP4600 Gutenprint driver does not work that well then you could look at using [PrintFab|http://www.printfab.net] which does support the iP4700. It costs €49 but there is a 30 day trial so at least you can try it before committing to buying.
Another option would be to use a Airport device, like the Express, instead of the Jetdirect print server. With the printer connected to its USB port you can then use the Canon iP4700 driver on the Mac.

How to create PDF from Excel with Password Protection Using Visual Studio & Visual Basic

Could someone provide some VB code sample(s) to create a PDF file with password protection (Security Method - Password Security - Restrict Editing & Printing)?
I create a bunch of reports every week using an Excel 2010 addin that subsequently must be printed to PDF. I then have to manually edit the properties of each document in order to apply the printing restriction.
I'm using Acrobat X.
I've downloaded the SDK but have no idea which dll's to use or where to begin.
Thanks!
Ross

That's surprising & disappointing. I would have thought that this capability would have long since been requested.
Thanks for the heads up.

Printing with SMC4007ABR Print Server to PostScript Printer

I've just set up my Mac Mini in a new network configuration, with an old SMC4007ABR router/print server printing to my Ricoh Laser AP2100 printer, using IPP printing and the configuration for a Generic PostScript printer, which had worked for this printer in previous setups. I am using the IP address of the router, 192.168.2.1, and the queue name specified in the documentation "lpt1". When I log into the router to view the status page it says the printer is idle and ready. When I submit a print job, I get the message "Network host '192.168.2.1' is busy; will retry in 30 seconds...".
I have tried deleting the printer queue and recreating it, using the queue name with upper case, using the queue name specified for use with Windoze ("LP"), changing the router configuration from DHCP to manual IP assignments and back again, resetting the print system from the Printer Setup Utility, using the CUPS interface at http://localhost:631/ to modify the printer setup in any sane way I could think of. I have looked at anything I could find in this forum that seemed relevant, but haven't found anything to try which I haven't tried. I have tried the SMC technical support system, but the router is no longer supported by them, but by another firm which charges per incident, and doesn't support Macintosh.
I would appreciate any suggestions from people who know idiosyncracies of this router, or who have fruitful insights into this strange behavior. Clearly my Mini sees the printer queue, but not well enough to be able to transmit data to it. Thanks for any insights you can offer.
Regards,
Geoff
Mac Mini Intel Mac OS X (10.4.8)

Thanks very much for your response. It seems I was ignoring the answer in some of the posts I was looking at, having misjudged that they were applying to a different sort of situation. I can't even remember what set of instructions from years ago established such a strong prejudice that I needed the IPP protocol. In any case, I'm grateful for your help.
Best regards,
Geoff
Mac Mini Intel Mac OS X (10.4.8)

IPP printing with password

Similar Messages

Maybe you are looking for