IPPE in Equipment - Consistency Checks -- ECC6 Upgrade Problem

HI All,
We're upgrading from 46C to ECC6. Currently 46C, we don't use iPPE and use IE4N to do install and removal for equipments (issue out reservations).
When we upgrade and try to use IE4N, we get the following message:
No structure gap exists at Equipment <XYZ> (warning message)
No coresponding iPPE structure node foun for function identifier (hard error).
We don't have iPPE setup on equipments, from the documentations on SAP, it mention you can set up on Configuration Tab on IE02. But we don't have that tab.
So how can I bypass iPPE setup in IE4N? Is it part of the switch framework that I can switch off?
I want IE4N to behave like before the upgrade. Any suggestions? has anyone come across the same thing?

I have created an OSS incident with SAP. But they basically came back and said pay their consulting service and have them come out to help us.
As a work around, I found transaction: OMPL1. It allows you customize the error level, whether its error, warning, etc. I turned IPPE error message from an error to warning.

Similar Messages

Very slow consistency check after upgrading from 2012 RU3 to 2012 SP1 RU5

this morning we upgraded the dpm server 2012 RU3 in steps to sp1 / ru3 / hotfix and then ru5
Everything went fine but problems started with the consistency checks on the large disks. They take forever(50mb per minute).
We never saw this behaviour before. Is there anything i can do to speed up the checks?
! UPDATE ! Still expirience the same problems. Doing a consistency check on a 600Gb disk and it is running for more then 8 hours now.

No sorry. Still no real solution. It looks like Windows Server 2003 is responding slower then 2008. But a real solution not found yet.

4.6C to ECC6 upgrade problem

Hi Team
Iam not sure is it the right thread to post or not i have a strange problem,
1: I have installed 4.6C on my test server which i want to upgrade it to ECC6 SR3 i have downloaded all the relevant software and the documents necessary,to my strange i found i cannot upgrade to ECC6 SR3 as my system is 32 bit/Windowns with 2003 server/oracle
2:I got to know that i can upgrade 4.6C to ECC6 SR2 on 32bit system but not to ECC6SR3 is this right?
3:can any one provide me ECC6SR2 upgrade label's i couldn't find it in service market place,I could see only ECC6SR3 upgrade software.
ECC6 SR2 Upgrade Master label
ECC6 SR2 Upgrade Exports
ECC6 SR2 Language exports
Thanks
Uday

Hi
Even i have 64 bit system but i couldn't find compatable kernel for my OS
My system configuration
Systen Manufacture:INTEL
Processore:Intel(R) pentium(R) III Xeon processor(2 CUP'S)
Memory:6GB
for this system i need to donwload relevant X86 kernel but i couldn't find it in service market place
i have dowloaded 1A64 bit kernel but it is not compatable and unable to run SETUP.BAT
Even i tried dowloading I386 kernel 51020564 but still iam unable to run SETUP.BAT its saying platform not supported.
Thats why i want to go for ECC6SR2 upgrade software
Can any one provide me X86 supporting kernel label so that i can download it
OR
ECC6SR2 upgrade export and Language labels
Thanks
Uday

Obiee 11g RPD consistency check error after upgrade

Hi,
got below error in RPD consistency check after upgrading from obiee 10g to obiee 11.1.1.6.
*ERRORS:
Business Model Core:
[38028] Logical column Dim - Contact.Age Range does not have a valid data type.*
logical column Age=
CASE WHEN "Core"."Dim - Contact"."Age" < 18 THEN 'A: <18' WHEN "Core"."Dim - Contact"."Age" < 25 THEN 'B: 18-25' WHEN "Core"."Dim - Contact"."Age" < 35 THEN 'C: 25-35' WHEN "Core"."Dim - Contact"."Age" < 45 THEN 'D: 35-45' WHEN "Core"."Dim - Contact"."Age" < 55 THEN 'E: 45-55' WHEN "Core"."Dim - Contact"."Age" < 65 THEN 'F: 55-65' WHEN "Core"."Dim - Contact"."Age" IS NULL THEN 'Unspecified' ELSE 'G: >65' END
above is formula for logical column "Age" and data type for that is varchar in physical
few more erros similar to above.
how can I fix the issue? appreciate for your help.
Thanks
Jay.

HI,
As I said, Age has valid datatype in physical layer but datatype is showing as "Unknown" in logical layer after upgrade to 11g. many other columns got same issue just for this logical table. I rebuild the logical column mapped to physical sources but it didn't fix the issue.
I hope you understand the issue.
Thanks
Jay.
Edited by: Jay on Jul 23, 2012 11:02 AM

LMS3.1 psu problem - Consistency check failed for base package ...AG

Hello,
We've got a package updater problem with a LMS3.1 installation.
1. After trying to update RME Device packages from GUI we got a message that LibCommon-v2.3.2 is needed
2. We tried to update LibCommon from CLI using psucli.bat, see below
3. We found a discussion in this forum, simular to this problem with the hint to reinstall the RME, what we did but with no improvement
4. We deinstalled, reboot, did a new installation of LMS3.1. But the problem still exists, with same message. We need the PSU, because most of our devices will be managed after device package update only.
Updating of each package brings warnings with pseudo package names, as ImageAG, MemoryAG and not with hints to real missing packages:
C:\lms\bin>psucli -p rme -install -src C:\install\lm31-updates\ LibCommon
WARNING: LibCommon(2.3.2):Consistency check failed for base package ImageAG
see also the psu.log containing all tryes of package updates
The problem goes a little bit in this direction, but with a new reinstallation as well:
https://supportforums.cisco.com/message/669047#669047
What can we do?
thx for hints, Steffen

When you install LMS on Windows, there are some recommended steps to take to ensure the installation is a problem free as possible:
Set the per-user and global TEMP and TMP environment variables to short values (e.g. C:\WINDOWS\TEMP)
Disable all anti-virus software
Disable Windows Data Execution Protection (DEP)
Login to the server as a local Adminitrator
Install from original, locally attached media
NEVER abort the installation after the installer says not to
Based on the symptoms described here, I'm guessing at least the first item was not done. TAC has a procedure to recover a bad RME package repository, but if the base installation is problematic, doing so would be moot. If you suspect the installation isn't 100% (beyond the package repository), uninstall, then follow the above steps to reinstall.
If you think the problem is just with the RME package repository, contact TAC, and they can provide you a good, up-to-date repository to jump start things for you.

LMS3.1 psu problem - Consistency check failed for base package

Hi all,
I tried to install the following packges for CiscoView 6.1.9:
Rtr2900.cv50.v2-0.zip
Rtr3900.cv50.v2-0.zip
but it gives me the following error:
Consistency check failed for base package NGMARShare
There are no Packages to be installed.
I uninstalled all packages and installed them again after I copied these two packages in the packages sources folder but it failed again.
Any one can help?
Thanks

the new package you try to install depends on a package that you don't have
DEPENDENT PACKAGE
=================
DtShare V1.5 (DtShare.cv50.v1-5.zip)
this can be seen from the error message you got
"Consistency check failed for base package DtShare"
my advice is to read the "Release Information" for the packages you try to install
you can find the Release Information in the same page of the download.
hope this helps,
also it's better to update all the device packages if your server have internet connectivity from CS > Software Center > device update.

Recovery points and consistency checks are failing for one disk on file server. Access is denied (0x80070005)

Good day! I've built a new DPM 2012 R2 server and migrated or re-created jobs from my older 2012 SP1 DPM servers as trying to upgrade them was not working out. The DPM R2 server is running great besides this one issue. The problem is with a file
and print server at a remote office. Since it has around 750 GB of user data on it I chose to do manual replica creation on the data disk, (E:) but created the C:\ drive replica normally, over the WAN. The manual replica creation was successful, and the initial
consistency check and recovery point creation worked as expected, however, since then it will not create another RP or run a CC on the E:\ drive. Recovery points on the C:\ drive are being created properly. When I try to run a CC I get this error: "An
unexpected error occurred while the job was running. (ID 104 Details: Access is denied (0x80070005))" I've tried to drop protection on the two directories of the E:\ drive (retaining data) and re-create, but that didn't help. I've even done a recovery
from the initial RP to verify that it was created properly, and that worked as well.

Hi,
Access Denied error is usually caused by Antivirus software. Please disable real time scanning on the DPM Server for DPMRA process.
928840 You receive job status failure messages in Data Protection Manager
http://support.microsoft.com/default.aspx?scid=kb;EN-US;928840
For DPM 2012 the path has changed.
To resolve this problem, configure the antivirus program to exclude real-time monitoring of the Dpmra.exe program on the Data Protection Manager server. By default, the Dpmra.exe file is located in the following folder:
%ProgramFiles%\Microsoft System Center 2012\DPM\DPM\Bin
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Connection dropped between DPM and Agent during consistency check, following DPM 2012 SP1 to DPM 2012 R2

Recently I have updated a DPM 2012 SP1 standalone server to DPM 2012 R2. That it’s self was a challenge... Following the upgrade most of the protection groups required consistency checks. For some time I have been having problems performing these consistency
checks on remote servers over a 10Meg link.
On the DPM server I would kick off a ping to the remote host, then start a consistency check. Within a few seconds I would start to get dropped pings, and very large ping response times, 3000ms plus. Within 3 minutes the pings would time out completely and
no connections can be made to the remote server, RDP etc. However any other server on the network can connect to the remote client. Eventually the DPM jobs times out and sometime later the pings also return.
The resolution to this has taken some digging but this is what I have found. The DPM agent update does not seem to fully work and requires a reinstall. Here is my process:
Logon to remote client server
Install .net 4 (a raw install of the client requires this, may not be needed when done via DPM)
Via Add Remove Programs, remove DPM agent
Clean up Reg
Delete "HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager"
Delete "HKLM\System\CurrentControlSet\Services\DPM**" (However this key is not there for me)
Back onto DPM Server
Modified protection groups as required to remove all instances of the client server
Remove Agent for client server
Install agent via DPM (watch for the glitch right at the end where it does a failed, then succeed…)
REBOOT client server
Add back into protection group
Consistency check kicked off automatically
This seems to have fixed the issue.

Hi,
The prerequisite required for DPM 2012 SP1 that must be installed is a re-rerelease of UR3 which is 4.1.3317.0 - please download and install the update specified.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Repository Consistency Checker for ODI

Hello all,
I want to run RCC utility to check for my patch upgrade. Do i need to download RCC utility from My Oracle support or it already exist somewhere in the installation directory?
Thanks

Hello,
I have a problem with the RCC.
Java Version : j2re1.4.2_19.
Path(includes) : C:\Program Files\Java\j2re1.4.2_19\bin.
JDBC Oracle Driver: ojdbc14.jar
Config Properties: OK, no problem; connection successful.
Repository DB: Oracle 10g
Repository DB OS: Sun Solaris 9 or Windows 2003 Server (exactly same issue)
ODIW - ODIM user previlige: Admin ALL
ODI Version: 10.1.3.x
Although everything seems fine, I got an error during the repository consistency check. When I search the net for the error message I could not find anything.
D:\ORACLEDI\diag_tools\bin>rcc.bat
Options:
P r e p a r i n g a R e p o s i t o r y u p g r a d e ? 1
S e t t h e t y p e o f a n a l y z i s 2
S e l e c t t h e M a s t e r R e p o s i t o r y c o n n e c t i o n 1
Resetting the analyzed Models...
Resetting the reference data...
Analyzing the Master Repository...
Updating the RCC data...
Checking the structure and contents of your Repository...
Updating the reference data...
Building the Repository related objects...
Reverse engineering the Repository structure...
Verifying the Repository structure...
Traceback (innermost last):
File "../bin/ODI_consistency_check.py", line 2875, in ?
File "../bin/ODI_consistency_check.py", line 2507, in run_analyze_master
File "../bin/ODI_consistency_check.py", line 1395, in run_analyze_repository
+>>> Master - RUN___ANALYZE_REPOSITORY failed.+
Master - Verify Infrastructure
java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
at java.util.Vector.elementAt(Unknown Source)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.getBindVar(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.d
D:\ORACLEDI\diag_tools\bin>
Is this a kind of repository issue? Do RCC utility raise this error because my repository is not consistent? Hard to understand for me...
Any help will be appretiated.
Thanks.
Haluk

The time characteristic consistency check has produced an error DBMAN 62

Hi
We are getting an error while updating to one target as The time characteristic consistency check has produced an error""
* Checked the respective PSA data field which is fine. Dates are in correct format.
* RSRV ran for the particular target. It had error but the jobs were successful till yesterday.
* Data from 01.05.2014 is having the problem ( Which I got from the record number in PSA )
NB: We are running on HANA database but the respective target is not yet HANA Optimised
Details Figures Attached
Any Idea.. What could have gone wrong
Regards
Reshoi R

Hi
Record Number 2995 is shown in the figures attached.
I have already carried out the deletion and automatic repair mentioned in RSCV061 even before posting this question but of no use ( I have shown that also in the figures attached at the posting time.
Reporting is fine. The problem is while loading the data to the cube. The loading is fine till date 30.04.2014 but from the date 01.05.2014. The record is error while updating.
The cube is partitioned from month 01.2008 to 12.2015.
Regards
Reshoi R

DSL and 9.1 to 9.2 upgrade problems? Please Help!!

I have a Beige g3 - 300 w/ 160 megs of memory - using Netscape 7.02 and occasionally Gatesmess IE-5. I have had dial up for 5 years and recently upgraded to DSL w/ Linksys WRT54G router connected via ethernet cable. Wifes HP laptop uses the wireless.
Problem is when connected to the internet, I get a looong -(30 - 40 second) delay between selecting the url and the page loading with a "resolving host" message at the bottom of the page. The modem send light flashes every five seconds or so and once the system locks on the url it loads really fast. With the dialup there was no delay in finding the url but took a long time to load. Result is it takes about the same amount of time to browse now as before. I don't think the winbox is having the same problem.
To try to resolve the "resolving host" issue I have been trying to upgrade from 9.1 to 9.2. When I download the package from apple.com at the end I get a 127 error which reestablishes itself everytime I click OK til I force quit the System. When I restart the computer, the file is on desktop OS 9.2 update.smi. First I opened the file w/ stuffit 5.2 and tried to install it following the instructions (sharing off, OS 9 extensions only etc) and about 4 minutes into the process I get the Bomb error 10. I have downloaded this three times and upgraded the Stuffit to 7.03 but am having the same problem. In order to get to 9.2.2 you have to upgrade to 9.2.1 first and that is what I am doing.
Anybody have any ideas either on the "resolving host" issue or the upgrade problem.
Thanks in advance,
Beige g3 - 300mghz 160 meg memory Mac OS 9.1.x

Thanks Grant.
I read the article and it was of some help. Reference TCP/IP control panel settings. I called Commspeed support and they gave me their three current DNS numbers. I typed them per article and nothing - dead. Called them back and they gave me the typical winbox answers "No hable apple" so left to my own devices and considering the stratigies suggested in the article I did two things.
I opened the TCP/IP control panel and deleted the Name Server Address - As they are supposed to be assigned by the server. There was also a check box that said use 802.3 which was checked. I unchecked it and tried the internet. Blam it was right there. I don't know which stratigy worked as I did them simultaneously.
Still don't know about upgrading to 9.2.
Thanks again,
Bill
Beige g3 - 300mghz 160 meg memory Mac OS 9.1.x

Unicode kernel upgrade problem in XI server

Hi
I'm trying to upgrade the Brtools in XI server and getting the following problem:
rx2n0v4:xdvadm 23> SAPCAR -xvf DBATL640O92_45-10002837.SAR
stderr initialized
processing archive DBATL640O92_45-10002837.SAR...
--- Unicode interface [u16_get.c line 233] pid = 6963 :
Invalid UTF-8 encountered by fgetsU16 (fileno 0x4)
fd
Characters previously read:
0043 0041 0052 0020 0032 002e 0030 0031
0052 0047 030 0031
--- Unicode interface -
End of message -
Illegal byte sequence DBATL640O92_45-10002837.SAR
Couple of times, i downloaded the kernel today and tried but get the same error. Here XI (6.40)is the unicode server and i downloaded the unicode kernel from sapnet (brtools and SAPCAR kernel). I tried with version 7.00 kernel but get the same problem.
Any solution of this problem?
Regards
Amar

Confusion About SP16 Unicode Kernel Patch/Upgrade
Problem with updating XI 3.0 (Kernel etc.)
Check this might be useful.

Reg: consistency check in recordset structure validation

Hi all,
I am doing FCC to FCC scenario, i am getting this error. Help me out, it is very urgent for me.
Sender Adapter v2723 for Party '', Service 'bs_text2text':
Configured at 2007-08-21 08:00:49 UTC
History:
- 2007-08-21 09:29:06 UTC: Retry interval started. Length: 2.000 s
- 2007-08-21 09:29:06 UTC: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 87: missing structure(s) in last recordset
- 2007-08-21 09:29:06 UTC: Processing started
- 2007-08-21 09:29:04 UTC: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 87: missing structure(s) in last recordset
- 2007-08-21 09:29:04 UTC: Processing started
Regards,
Ajay.

Hi Ajay,
Problem with the file content conversion parameters you specified in the sender file adapter.
Do let us know your DT structure and FCC parameters specified in adapter.
Regards,
Sumit

IPhoto won't open due to the not being updated but when I check to upgrade to iPhoto 11 it tells me it is installed. The photos in the library were modified using 9.1.5 and the iPhoto is said to be 7.1.5 (iPhoto 8). Any ideas?

iPhoto won't open due to the not being updated but when I check to upgrade to iPhoto 11 it tells me it is installed. The photos in the library were modified using 9.1.5 and the iPhoto is said to be 7.1.5 (iPhoto 8). Any ideas?

How do you know the library was modified with iPhoto 9 (11)? If you've never had iPhoto 9 on your Mac it could'nt have. It sounds like a damaged library. Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

OBIEE Consistency Check is taking too much time

Hi,
When I run consistency check globally, it takes too much time. Itt is waiting after completing about %80 of it. I can't click on it, the application is freezing. How can I recover it? What can be the cause of this problem?
Thank you for your attention,
Regards

Hello Mohan,
The DBTABLOG table does get large, the best is to switch off logging. If that's not possible, increase the frequency of your delete job, also explore one more alternative have a look at the archival object: BC_DBLOGS, you could archive old records (in accordance with your customer's data retention policies) to reduce the size of the table.
Also, have a look at the following notes, they will advise you on how to improve the performance of your delete job:
Note 531923 - Audit Trail: Indexes on table DBTABLOG
Note 579980 - Table logs: Performance during access to DBTABLOG
Regards,
Siddhesh

IPPE in Equipment - Consistency Checks -- ECC6 Upgrade Problem

Similar Messages

Maybe you are looking for