IPQC cannot input inspection results

Hi Experts,
I have the following done for IPQC:
1. Finished product enabled inspection type 03
2. Inspection Plan for same finished product is created with usage 1. (1OPERATION with 1 CHARACTERISTIC inside)
3. Created Production Order for Finished Product, Released and Saved
4. Inspection Lot created, number beginning with 3xxxxxxxxxxx
Problem:
When trying to input inspection result for that inspection plan, SAP prompted "no characteristics were found".
How can SAP shows characteristics and let user enter inspection results one by one?
Thanks!
Regards,
Daniel

Hi Sujit Gujar,
Is the sampling also related to the routing instead of inspection plan in IPQC?
Thanks a lot!
Regards,
Daniel

Similar Messages

Inspection Lot Created but not shown in QE72, and cannot input result or UD

Hi Exports,
I have Inspection Lot Created by 04-production goods receive, but not shown in QE72, and cannot input result or UD
Inspection Lot status: CRTD CHCR SPRQ,
in Business Process of inspection lot showing:
*Cancel inspection lot
Assign RMA proc. to insp. lot
Assign notification to lot RMA
Batch log indicator required
Certificate missing
Change inspection lot
Change planned lot quantity
Choose task list for insp. lot
Confirm Receipt of Certificate
Create part. lot for insp. lot
Flag cancellation
Inventory posting required
Lock
Lot for process documentation
Lot reset allowed
What is going wrong?
BTW, the sampling procedure in Inspection Plan is a read-only field, but empty inside.
Daniel

Dear in your case there is no Inspection plan was attached to the lot so attach the plan and make lot status to REL then only you can do Results Recording.
Inspection plan gets auto assigned to availble inspection plan on respective date if you enabled the inspction with tasklist and automatic assignment boxes in relevant inspection types in MM QM view for this Inspction plant should be made avaialble in stsyem before any lot created which can be created QP01.
If it is not getting assiged automatically then you can assign it manually by QA02 here go to inspection specification tab click on Task list assignment the go to sample tab and click on sample and SAVE Inspection plan will be attached to inspection plan.
Once inspection plan is the lot status you can see REL before assignment of a plant it would be CRTD.
Cheers
KK

Inspection results for more than one lot

How do i see inspection results for different lots of the same material together in a single screen. Is there any standard report or query available in SAP?
Prahlad

Dear Prahlad
You can see it in ways
1) Go to QS28. Input the plant and the mic and execute. You will get MIC details. Choose the MIC and click on Result history. A pop will appear Result history Limit Selection. In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots
3) Go to QA33 > result> Select the Mic> go Result historyhistory >In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots with all values and charts
4) standard reports such MCXD,QGP1 can be used
Hope this helps
Regards
gajesh

Inspection Results Listing

Hi Experts,
After inspection results being inputted, is there any standard TCODE in SAP which can list out the inspection results in detail (1 by 1)?
And also any program for listing what results required to be inputted but not yet inputted?
Thanks a lot!
Regards,
Daniel

Have you tried
MCXV
1
apart from QA32/QA33
Edited by: nbgore on Mar 31, 2011 2:14 PM

Copying Inspection results from inspection lot.

Dear All,
Please explain me the process of copying inspection results in QM. Following is my clients requirement:
During receiving inspection they receive the same material in say 10 batches (coils). They want to create the independent batch for each coils of same material for tracking mechanism, so I don't have any option to generate that many number of lots.
Out of this 10 lots, say there are 2 masters (mother coils). Means there are two set of characteristics only which i need to copy for 5 lots each.
As I learn from SDN, EA - PLM need to be activated . But I don't know what are the adverse effects of activating same.
Please explain me the process.
Best Regards.
Shekhar Mokashi

Hi Shekhar,
Refer the OSS note 855959 - Activation of Extension Sets via SPRO not successful.
I think all your doubts regarding to this Enhancement package will get resolved.
The big warning is given there in that note itself about implementing the EA-PLM enhancement is.....
Once an Enterprise extension set has been activated, it cannot be de-activated by de-selecting the option in the SPRO or otherwise, because BC Set activations cannot be undone.
Appart from that note refer the document for
Release Notes
SAP ERP Corporate Services
SAP enhancement package 2 for SAP ERP 6.01.
the link for the same is pasted here FYI.
[Chap_04_RNCorporateService|http://www.id.uzh.ch/dl/sw/sap/upgrade/Chap_04_RNCorporateService.pdf]
Even after this much stuff completion, you don't have your doubt cleared up then I would advice you to ask the question in [ SAP Enhancement Packages|/community [original link is broken]; forum.
Regards with lots of good luck wishes.
Shyamal.
Edited by: Shyamal Joshi on Jul 26, 2008 12:19 PM
Edited by: Shyamal Joshi on Jul 26, 2008 3:06 PM

Report for Inspection Results

Hi experts,
Is there any standard TCODE which can list out all the inspection results by material?
Any activation required?
Regards,
Daniel

Hi,
QGP1 is too discrete because I need to input the characteristics one by one.
MCXB have no results displayed.
MCXD have no results displayed.
I need SAP provide a list of inspection lots, plus defect informaiton within a time period (like by month).
Regards,
Daniel

Inspection result

Hi
I need to display inspection results for multiple inspection lot (ALV )report
Inspection point (user field also ) active
Result were recorded for multiple MIC's & at the same certain MIC , inspection discription also record that is also need to be displayed
Query I can able to display alll like
inspectionlot ins point MIC1    sHORT TEST
                                    mic2
                                    mic 3
But I need to rearrange like
Inspectionlot   Inspectionpoint   Mic1 MIC2 MIC3 MIC1 short text like that....
Is't possible? If possible how can I rearrange rows in to Column.....
Anyone of you come across this kind of requirement
Please share you inputs .....
Thanks

Hi
I did it SQVI and infoset query
working goood
my problem is change lay out instead of multiple rows fo each MIC, i want to change multiple column for each MIC
thanks
for the response
Sami

Uploading/Interfacing Inspection Results

HI QM Users,
Our manufacturer is planning to send the inspection results using XML, ASCII file and we need to upload that in our SAP QM system. What is the best way to achieve this? Does anyone has done results recording by reading from a input file before? Is it simple to do?
I also have following concerns about this process-
1. How to match all insp. plan (characteristics, possible code values, sampling and possibly the valuation mode etc.) per SAP requirements. How to define the file structure for such file transfer.
2. How to validate the accuracy of the data in the source system. i.e. possible values/parameters for each characteristics.
Regards,

Usually you set the inspection up that you expect to have data uploaded to from an external system with a QDR system assigned to the workcenter. This cause the characteristics to be identified as going to be recorded from an exrternal system such as a LIMS.
LIMS vendors usually provide the interface to perform the function of loading the data to SAP. In your case you will have to design that piece. SAP provides the routines to do this. You'll need to design a way to get the file from your vendor into the format needed to to load.
The info below should help you get started.
Craig
Communication with External Systems
RFC function modules are available in QM for communication with external systems. The names of all the function modules begin with QIRF_, which makes them easy to find within the development environment.
QIRF_SEND... These function modules allow you to download data from an ERP system to a subsystem.
QIRF_GET... These function modules allow you to upload data from a subsystem to an ERP system.
For further details on the function modules, see the documentation for QM.
QIRF_SEND_REQUIRMENTS_GET_DATA
You use this function module to download operation and characteristics data to the subsystem. Ensure that the Record Type field in the I_QUAILS input structure is empty and that the SUBSYS (Subsystem) field is filled.
QIRF_GET_ORIGINAL_VALUES
You use this function module to upload inspection data recorded in the subsystem to an ERP system.
For quantitative characteristics, use record type Q51. For qualitative characteristics, use record type Q52.

Copy Inspection Results of one lot to other lots at a time

Dear Experts,
As per settings made under "Make Settings for Copy of Inspection Results" I am able to copy inspection results but still I am not getting what I exactly want. Below are different requirements explained in details
1. I am not able to copy twice on the same lot. e.g. if a lot has status RREC i.e. RR has been done then if at a later time I want to copy some other results over here then it's not happening.
In help.sap page somewhere it is mentioned that copy is possible if lot has status CALC. I want to have some configuration which I don't know for which SAP should allow the copy functionality with status RREC also.
2. By above functionality I want to do RR for several lots collectively at a time. E.g. if I have 100 lots then with same quality results it's tedious to copy results for each one by one. Like "QA16 - Collective Usage Decision" I didn't find any similar transaction for results recording(collectively).
3. Although my results are being copied from one lot another but MIC valuation are not being transferred given that I am not using any sampling procedure. I want manual valuation to be copied to the destination lots.
Any valuable suggestion will be highly appreciated.
Regards,

Dear,
it is not clear from your question.
Please get more details,
In which release you are working?
In SPRO what special setting you made for this special case
Inspection origin is linked with no range/TL type/insp type.
Wher exactly you set this new configuration.
Please let us know so that we can simulate and help you out

My iPad is Disabled and I cannot input my passcode. how do i do that? I have tried to connect to iTunes and it will not connect via computer connection as I cannot activate my iPad with the pass code. what do i do?

My iPad is disabled and I can not input my passcode. what do i need to do? I tried to connect to iTunes, but it will not allow me to connect via compute USB as I cannot input my passcode for the iPad.

You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/re-sync your content to it

Table as input and result - is that possible ?

Hi,
just wanted to know if it's possible to have a table (with multiple entries) as input and result in a function in brfplus ?
if so how to assign a table in the signature tab for function as an input parameter
thank you,
Regards,
Michal Krawczyk

hi Carsten,
thank you for the info
can you tell me how to configure a table input ?
can I use it with decision table ?
BTW
I only need simple table (no nested tables as from EhP2)
Thank you,
Regards,
Michal Krawczyk

I am getting a dark or shaded screen on my safari pages. I can conduct a search but cannot navigate the resulting website

i am getting a shaded screen after a search on safari and cannot navigate the resulting websites.

Dreamyqueeny wrote:
My laptop fell off the coffee table, and slammed shut. I
anybody have any ideas? else I am going to have to visit a genius! grrrrrrr....
Thanks in advance!
Vix
Looks like that is what you are going to end up doing. No telling what was damaged internally.

Cannot input new number for depost

Hi,
My client cannot input new deposit.
When input new deposit, deposit # : 520900001 is appear on the screen.
When click add, the following message appear :
"This entry already exist in the following table 'Deposit' (ODPS)."
On document numbering screen, it shows 520900001 is the next no.
Also, Check into ODPS file there's no. deposit # : 520900001.
SAP version : 2005, SP 01, PL 39
Thank you very much in adavance.
Best regards,
Surya

Hi Surya,
Please perform the following first;
Goto> Administration> System Initialisation>General Settings>Services--> Perform Data Check
Check this, log out of sap and log in again. Let me know if the problem still persists.
Regards,
Joseph

QM inspection result reports

Experts,
How come there is never any data for QM reports such as MCXA, MCXB, MCXD, MCXI although inspection lots are available in the system?
Is there another report that I can use to see inspection results in a table layout, e.g. list of batches on one axis, list of characteristics on another and the results?
Thanks!
Rgds

Sure you can. Simply add some of the standard characteristics to the batch class that SAP provides.
LOBM_APO_SL_MAX     Max shelf life/maturity in sec
LOBM_APO_SL_MIN     Min shelf life/maturity in sec
LOBM_APO_SL_UTC     Reference time stamp of batch
LOBM_BPRIO     Stock determination: priority
LOBM_BWTAR     Valuation type
LOBM_HERKL     Country of Origin
LOBM_HSDAT     Date when batch was produced
LOBM_KRT     waiting period of a batch
LOBM_LFDAT     Batch determin. delivery date
LOBM_LGORT     Storage location
LOBM_LVORM     Deletion ind. for batches
LOBM_MBDAT     Material availability date
LOBM_MENGE     Batch determination sort qty
LOBM_QNDAT     Next insp. date for batch
LOBM_QSCORE     Qualityscore Usage Decision
LOBM_RLZ     Remaining shelf life for batch
LOBM_RLZ_PROZ     Req. remaining rntme in proc.
LOBM_UDCODE     Usage Decision
LOBM_VERAB     Availability date
LOBM_VFDAT     Expiration date, shelf life
LOBM_ZUSTD     Status of batch
Not all of these are suitable to add to the batch class. Some are designed strictly for batch search strategy classes. There are several OSS notes out there on the use of these. As you can see, several of these are date related. I usually always add LOBM_HSDAT, LOBM_UDCODE,and LOBM_VFDAT.
As you can see, the Batch number is not in the list of standard characteristics. This can be created however. Create a general characteristic with reference to table MCH1, field nanme CHARG and add this characteristic to your classes. You can then use it to search and sort for specific batches just like any other characeristic in CL30n. When displayed, the field is greyed out from user entry since it is a referenced field.
Craig

Inspection results copying

Hi All,
In result recording inspection results can be copied to the actual inspection lot from an existing lot. Is this possible, if so where we have to this customizing.
Navin

Hi,
Pl go thro the forum post and doc link below
Re: Copy Inspection Results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun

IPQC cannot input inspection results

Similar Messages

Maybe you are looking for