IPrint Appliance 1.1 detailed upgrade instructions

So I've read through what documentation I found but I must have missed the section with details upgrade instructions from 1.0.1 to 1.1. If I did could someone point me to them. If I didn't is anyone willing to take a crack at creating some. Mobile printing is just starting to catch on here and I want the new features but I don't want downtime.
Any help is appreciated, even if it's just hey bone head read it here. Thanks.
Or is it exactly the same as 1.0.1?

Originally Posted by nlandas
Thanks Thomas,
The IP info and username and password info is easy to duplicate. Is there an easy way to look up and write down the remainder like disk setup?
-Nyle
That question sounds really novice to me. What I mean to say is I'm confused on the disk portion more specifically. On Filr you have to create separate disks to store information with Mobile iPrint I don't remember doing that. My VM only shows one 40GB disk attached to it. The video simply shows selecting use hard disk and continuing on. It also says on the warning message that says don't store data on the system disk (Which apparently, I am doing on the appliance already) the video says to just continue anyway.
Then it shows importing the configuration into it.
So once I've done that since I have all the IP and username info, etc. How do I add another hard disk to store data. I was pretty certain I set up the appliance as per documentation but obviously if I was supposed to add another virtual disk, I did something wrong.

Similar Messages

  • IPrint Appliance 1.1 and Firefox 36.x- can't install printers

    iPrint Appliance 1.1
    Patches Applied:
    iPrint-1.1.0.409.HP.zip 2015-01-22 16:12:31
    iPrint-1.1.0.410.HP.zip 2015-01-22 16:16:56
    iPrint-1.1.0.411.HP.zip 2015-01-22 16:19:24
    iPrint-1.1.0.412.HP.zip 2015-02-02 13:33:11
    Win8.1x64 and Win7Prox64 workstations running Firefox, in an AD-only
    environment
    All was working well until Firefox upgraded from v35.x to v36.x. Now,
    we cannot install printers from the ipp page. The page pulls up,
    printer can be selected, we get the dialog box asking about installing
    the printer and the checkbox to set as default, but when proceeding
    with the install the dialog disappears and no printer installation
    commences.
    Back-revving Firefox to v35.0.1 allows printer installation to
    complete. Java ranges from 8.25 to 8.40 and the problem appears
    across all, no correlation between java version and the problem
    appearing-- only the FF version.
    Is anyone else seeing this issue?
    Thx,
    XX

    Originally Posted by DG
    iPrint Appliance 1.1
    Patches Applied:
    iPrint-1.1.0.409.HP.zip 2015-01-22 16:12:31
    iPrint-1.1.0.410.HP.zip 2015-01-22 16:16:56
    iPrint-1.1.0.411.HP.zip 2015-01-22 16:19:24
    iPrint-1.1.0.412.HP.zip 2015-02-02 13:33:11
    Win8.1x64 and Win7Prox64 workstations running Firefox, in an AD-only
    environment
    All was working well until Firefox upgraded from v35.x to v36.x. Now,
    we cannot install printers from the ipp page. The page pulls up,
    printer can be selected, we get the dialog box asking about installing
    the printer and the checkbox to set as default, but when proceeding
    with the install the dialog disappears and no printer installation
    commences.
    Back-revving Firefox to v35.0.1 allows printer installation to
    complete. Java ranges from 8.25 to 8.40 and the problem appears
    across all, no correlation between java version and the problem
    appearing-- only the FF version.
    Is anyone else seeing this issue?
    Thx,
    XX
    Yes, I have reported it to Novell. I'll let you know what happens but as usual, if you are able to open a SR then plz go ahead.
    Thomas

  • IPrint Appliance 1.0.1 import configuration , uploading

    I export iprint configuration by using TID 7014187, and import it to iPrint appliance 1.0.1.
    this zip file only 112KB, but it keep "uploading" status more than 30 mins...
    Who success import configuration filr to new Appliance ?
    thanks!!
    wyld

    Rickb wrote:
    > wyldkao wrote:
    >
    >>
    >> I export iprint configuration by using TID 7014187, and import it to
    >> iPrint appliance 1.0.1.
    >> this zip file only 112KB, but it keep "uploading" status more than 30
    >> mins...
    >>
    >> Who success import configuration filr to new Appliance ?
    >>
    >> thanks!!
    >>
    >> wyld
    >>
    >>
    >
    > Did yours ever finish? I am sitting here in the same boat. Just keeps
    > processing. My export was larger and did include the print drivers. I see
    > java cranking away in top for a while but that has settled down and prett
    > much nothing else going on. Is there an update log or something to see
    > what it is doing?
    I have attempted 3 times a run at this for the upgrade. This should not be
    this hard. I have watched during the upgrade at the messages file and see
    all kinds of directory errors basically I think about the tree. It just runs
    on and on. I am wondering if anyone knows what this file is? Is this the
    file the directory would be restored from? mobileappliancedib.db
    Thanks

  • Iprint appliance 1.01 launched

    Iprint appliance 1.01 launched, with Xen image too.
    See ; Novell does listens to customers !

    stelgenkamp wrote:
    > Iprint appliance 1.01 launched, with Xen image too.
    Release Details
    .. Support for deployments using the Xen Project and Microsoft Hyper-V
    hyper visors
    .. Support for Windows 2012 R2 server
    .. Server-side support for Windows 8.1 and Mac OSX 10.9
    .. Support for local rendering with PS and PCL drivers which adds
    flexibility for printer language support
    .. Rendering quality and conversion improvements for multiple document
    types including PDF, JPG images, Word and Excel spreadsheets
    .. Improved scalability and performance for NetIQ eDirectory and Windows
    Active Directory user import
    .. General bug fixes
    Your world is on the move. http://www.novell.com/mobility/
    We know what your world looks like. http://www.novell.com/yourworld/

  • Best Practice Moving to iPrint Appliance

    I'm working with a site that has some old NDPS printing on NetWare 6.5 and some OES based iPrinting. We are moving to the iPrint appliance. While you can migrate/import printers from the old system into the appliance, I haven't figured out the best way to deal with the clients. What have others done to switch the clients over to the appliance based printers? Are there any tricks here? Looking for what others have done. Thanks.
    Matt

    matt,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://www.novell.com/support and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • IPrint Appliance can the IP and/or Certs be changed on the iPrintAppliance?

    Hope someone can help:
    we recently replaced a few of our printers with new models..kept the same iprint printer definition - simply updated the...

    iPrint Appliance
    Version: 1.1.0.407-HP.416
    I cannot print to any Ricoh Multi-Function printers from Droid phones or iPads.
    I can print to all...

  • IPrint Appliance & PCounter

    They are not very descriptive (yes, had the same answer by mail, means not
    much)
    (7/23/2013) Please note that future development of this product will be
    limited to page counting fixes only. No new features or infrastructure
    changes will be made.
    Did anybody try to run it on iPrint Appliance 1.01
    If it does not work, are there any alternatives? Or moving to MS Printing is
    the only option?
    Seb

    "Sebastian Cerazy" Wrote in message:
    > They are not very descriptive (yes, had the same answer by mail, means not
    > much)
    >
    > (7/23/2013) Please note that future development of this product will be
    > limited to page counting fixes only. No new features or infrastructure
    > changes will be made.
    >
    > Did anybody try to run it on iPrint Appliance 1.01
    Theoretically it might work but it certainly won't be supported by
    either A.N.D. Technologies (developer of Pcounter) since
    development has ended of Pcounter for Novell.
    Incidentally I note the Installation Guide for latest version of
    Pcounter for Novell (5.52) refers to SLES10 SP3 + OES2 SP1 (which
    is an invalid combination and was never supported by Novell!) so
    I suspect OES11 is also not supported.
    > If it does not work, are there any alternatives? Or moving to MS Printing is
    > the only option?
    There are a few alternatives available but the one that seems to
    be the most popular is PaperCut.
    HTH.
    Simon
    Novell Knowledge Partner
    ----Android NewsGroup Reader----
    http://www.piaohong.tk/newsgroup

  • IPrint Appliance 1.1 - Beta program planned

    Hi All,
    We are working on Novell iPrint Appliance 1.1 which will have new features in the areas of Rendering, Mobile Apps, Appliance Deployment & manageability.
    For the same, we plan to have a beta program run from early April to end of May 2014.
    If you are interested in joining this beta program, please have this short survey filled before 24th March.
    Regards,
    Devadas K
    Novell iPrint Team

    kdevadas,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://www.novell.com/support and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • Stuck at "Setting up a new iPrint Appliance, please wait .."

    Hi!
    iPrint Appl 1.0.1 and a new setup and stuck at "Setting up a new iPrint Appliance, please wait ..." (Configuring...), for hours. I remember it didn't take a long time with 1.0.0 to set up.
    Mh. Any experiences already?
    More thanks, Alar.

    Hi!
    Just to end this thread. Seems to it (problem described below) was caused by separate (second) hard disk presence which had installation from old system and even choosing a New install ... it stuck at it.
    New install with "clean" second disk solved the problem, but, seems to, this second disk is no needed for iPrint Appliance, anyway.
    https://forums.novell.com/novell-pro...appliance.html
    Alar.

  • Iprint Appliance Import Users Swipe card ID for Papercut

    Hi All
    We are using the iPrint Appliance in conjunction with Papercut follow me printing. The idea is that everyone prints to the one iPrint Printer and whichever printer the user goes to they swipe their ID card and Papercut redirects their job to that printer. Our issue is that the swipe card number for each user is stored in the Serial Number attribute in eDirectory. As the iPrint appliance is it's own Edirectory tree when we do the iPrint LDAP import we need to import the Serial Number attribute as well so Papercut has access to the each users swipe card number. It does not matter which attribute the number is imported to as I can adjust that at the Papercut end. Under the Users section on the LDAP import screen it lists the Internal ID to ldap attribute list. I have tried changing this list to get the sync to import to the Card ID number from the Serial Number attribute to the phone, Description, even first and last name but even left at the defaults the only attribute it will sync is the Last Name.
    If anyone has any idea where I could go next to try something or even get a log file to try and trace what is going on.
    Many Thanks in advance
    Graeme

    Glad to hear you were able to work around the issue. I have passed along an enhancement request to engineering. I am not sure if it something that will be addressed, but if it is, I'll update this post.

  • Installing samba on iPrint Appliance 1.1

    Hi all,
    Just wondering if there is a way to set up samba on the iPrint Appliance?
    We have Papercut set up on the iPrint Appliance and I am attempting to set up the Web Print functionality of Papercut. However this requires a samba share to be created on the iPrint Appliance server (/vastorage/papercut/server/data/web-print-hot-folder) that is to be accessed by a Windows server acting as an intermediary for print jobs for users that are using their own BYOD notebooks.
    I am assuming this is not a supported configuration for the iPrint Appliance as it isn't a listed configurable system service in the iPrint Appliance web console nor installed by default, but I'm just throwing this out there in case there is a way.
    Regards,
    Matt

    Thanks Simon.
    I'll definitely raise it with Papercut.
    Originally Posted by smflood
    On 07/04/2015 03:56, xvastx wrote:
    > Just wondering if there is a way to set up samba on the iPrint
    > Appliance?
    >
    > We have Papercut set up on the iPrint Appliance and I am attempting to
    > set up the Web Print functionality of Papercut. However this requires a
    > samba share to be created on the iPrint Appliance server
    > (/vastorage/papercut/server/data/web-print-hot-folder) that is to be
    > accessed by a Windows server acting as an intermediary for print jobs
    > for users that are using their own BYOD notebooks.
    >
    > I am assuming this is not a supported configuration for the iPrint
    > Appliance as it isn't a listed configurable system service in the iPrint
    > Appliance web console nor installed by default, but I'm just throwing
    > this out there in case there is a way.
    You'd need to grab and install the Samba-related packages from matching
    SLES media (or installed server) but as you rightly assume this would
    not be supported by Novell (so would have implications if any security
    issues reported and/or subsequently patched).
    It's probably worth both contacting PaperCut and logging an enhancement
    request with Novell[1].
    HTH.
    [1] www.novell.com/rms
    Simon
    Novell Knowledge Partner
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below. Thanks.

  • IPrint Appliance: miggui ACL migration

    I just ran a printer migration (miggui) from our OES 11 iPrint server to our iPrint appliance (version 1.0.1.69). All printers appear to have migrated successfully with no errors however I noticed that none of the printer ACLs migrated with the printers.
    I was told that if I had the users imported into the iPrint appliance before the printer migration process that the ACLs would transfer during the migration process. I attempted the migration after the users were imported into the iPrint appliance with no success of the ACLs migrating from the source server.
    Any ideas what I missed or how I can get the ACLs from the Source iPrint server to the Target iPrint appliance?
    Thanks in advance!

    shabotz,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://www.novell.com/support and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • IPrint Appliance Printers Assigned to eDir Users not Auto-Installing

    Our iPrint appliance is all patched. We migrated from an OES 11 SP2 iPrint installation. When a printer is assigned to an eDir user from the...

    Hello,
    I built a new server SLES 11 SP3/OES 11 SP2 and I have iPrint installed on this server. I have 3 elementary schools that each have their...

  • NSS322 (and others) Upgrade Instructions for MOZY users

    Beating my head against the wall tonight. Upgrade to 1.5 went fine.
    Tried to get over to QNAP and no go.
    Long story short, do a 10 Second Reset on your NAS.
    Then you will able to upgrade.
    Cisco - you should add this to instructions. Across the board, a 10 second reset would probably be a good idea for everyone.
    If you actually used the Mozy integration, reset it.
    I use QNAP / Elephant Drive at home - LOVE it. Looking forward to getting this client on Elephant Drive Enterprise.
    Good Luck !!

    Jonathan,
    Thanks for the post. 
    For the two features that are not available on QNAP (Mozy and Cisco Access Now), the best practice should be to deactivate it feature first....  Before transitioning to QNAP firmware.

  • Where can I find repair videos or detailed repair instructions

    I am trying to repair a T400 laptop, but cannot get it apart. The hardware maintenance manual is useless, the illustrations are not detailed enough and do not show how to remove some parts. Tech support told me to "Google it" to find more info (I thought he was kidding, but he was serious), could not find anything other then the HMM though. Trying to replace the system (planar) board by the way. I get as far as the LCD mask removal part and cannot get any further. Any help would be appreciated...thanks.

    Dan123 wrote:
    I am trying to repair a T400 laptop, but cannot get it apart. The hardware maintenance manual is useless, the illustrations are not detailed enough and do not show how to remove some parts. Tech support told me to "Google it" to find more info (I thought he was kidding, but he was serious), could not find anything other then the HMM though. Trying to replace the system (planar) board by the way. I get as far as the LCD mask removal part and cannot get any further. Any help would be appreciated...thanks.
    You can find detailed service manuals for most, if not all ThinkPads ever made at the link below.
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-39298

Maybe you are looking for

  • PI 7.11 sp6 Integration Builder - folder view error

    Experts, We recently installed SAP NW PI 7.11 (ehp1) up to sp6.  This is a new install.  We did all the wizards, etc and things are basically ok. we execute SXMB_IFR, then go to "integration builder" link and login. If I change the view from "object

  • Addled Brain- which direction to go in setting up a t-shirt e-commerce site.Please help wise people!

    Hello, I have a little experience from 10 years ago building web sites, but things have changed a lot (but i am very good at teaching myself).  Can anyone advise me on the way to go? I want to create a t-shirt e-commerce site and have no money to pay

  • Mac Os 10.6.8 Crash and video freeze, Mac Pro

    Hi, I just installed Mac OS 10.6 on my old Mac Pro, early 2009 (8 gib of Ram installed). I still have my old Mac OS10.5.8 on another internal boothable disk. It went well the first day or so but now I'm experiencing some major video problems: picture

  • Upgrade to new OS, but can no longer log in to computer

    I upgraded my iMac to Leopard and after the upgrade is complete, the machine boots up, asks me for a name and passwrd, but does not accept anything. I tried resetting the user password using a startup disk, but same results. machine boots up, does no

  • Multiple BAPI calls in RFC Adapter

    Hi, Dear Friends! I have asynchronous scenario File to RFC(BAPI). File contains raws. For each raw I need to execute BAPI. With the help of each raw I need to construct one document in R/3 database with the help of BAPI. But now my scenario provide o