IPrint Appliance: miggui ACL migration

I just ran a printer migration (miggui) from our OES 11 iPrint server to our iPrint appliance (version 1.0.1.69). All printers appear to have migrated successfully with no errors however I noticed that none of the printer ACLs migrated with the printers.
I was told that if I had the users imported into the iPrint appliance before the printer migration process that the ACLs would transfer during the migration process. I attempted the migration after the users were imported into the iPrint appliance with no success of the ACLs migrating from the source server.
Any ideas what I missed or how I can get the ACLs from the Source iPrint server to the Target iPrint appliance?
Thanks in advance!

shabotz,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Similar Messages

Best Practice Moving to iPrint Appliance

I'm working with a site that has some old NDPS printing on NetWare 6.5 and some OES based iPrinting. We are moving to the iPrint appliance. While you can migrate/import printers from the old system into the appliance, I haven't figured out the best way to deal with the clients. What have others done to switch the clients over to the appliance based printers? Are there any tricks here? Looking for what others have done. Thanks.
Matt

matt,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

IPrint Appliance Printers Assigned to eDir Users not Auto-Installing

Our iPrint appliance is all patched. We migrated from an OES 11 SP2 iPrint installation. When a printer is assigned to an eDir user from the...

Hello,
I built a new server SLES 11 SP3/OES 11 SP2 and I have iPrint installed on this server. I have 3 elementary schools that each have their...

ACL migration Error : 1210 could not find a domain controller for domain "Test Domain" (Old Domain)

Hi
We are migrating from old domain to new domain. Before live migration, we are trying to check the ACE/ACL migration through SubInACL. We are running the SubInACL on a cluster, which is a member of the Old Domain (Test Domain). We are able to resolve and
ping both Old Domain and the New domain from this cluster machine. We have created a network share on this cluster, which is accessible to all Domain Users of the Old Domain. Both Domains have two way forest level trust. we are trying to migrate
the ACL of this share (\\ClusterMachine\testshare$) to the new domain using SubInACL. We are trying to run the below command to get it done.
subinacl /outputlog=C:\Users\Administrator\Desktop\Migrationlog.txt /subdirectories
\\ClusterMachine\testshare$\*.* /migratetodomain=OldDomain=NewDomain=mappingfile.txt
Mapping file contains : Domain Users=NewDomain_Users
But we are geeting the Error that "1210 could not find a domain controller for domain "Test Domain". Error finding domain name : 1210 the format of the specified computer name is invalid. Current Object "\\ClusterMachine\testshare$"
will not be processed."

Hello,
how in detail is DNS set up in each domain?
Any problems when using nslookup to verify?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

IPrint Appliance 1.1 and Firefox 36.x- can't install printers

iPrint Appliance 1.1
Patches Applied:
iPrint-1.1.0.409.HP.zip 2015-01-22 16:12:31
iPrint-1.1.0.410.HP.zip 2015-01-22 16:16:56
iPrint-1.1.0.411.HP.zip 2015-01-22 16:19:24
iPrint-1.1.0.412.HP.zip 2015-02-02 13:33:11
Win8.1x64 and Win7Prox64 workstations running Firefox, in an AD-only
environment
All was working well until Firefox upgraded from v35.x to v36.x. Now,
we cannot install printers from the ipp page. The page pulls up,
printer can be selected, we get the dialog box asking about installing
the printer and the checkbox to set as default, but when proceeding
with the install the dialog disappears and no printer installation
commences.
Back-revving Firefox to v35.0.1 allows printer installation to
complete. Java ranges from 8.25 to 8.40 and the problem appears
across all, no correlation between java version and the problem
appearing-- only the FF version.
Is anyone else seeing this issue?
Thx,
XX

Originally Posted by DG
iPrint Appliance 1.1
Patches Applied:
iPrint-1.1.0.409.HP.zip 2015-01-22 16:12:31
iPrint-1.1.0.410.HP.zip 2015-01-22 16:16:56
iPrint-1.1.0.411.HP.zip 2015-01-22 16:19:24
iPrint-1.1.0.412.HP.zip 2015-02-02 13:33:11
Win8.1x64 and Win7Prox64 workstations running Firefox, in an AD-only
environment
All was working well until Firefox upgraded from v35.x to v36.x. Now,
we cannot install printers from the ipp page. The page pulls up,
printer can be selected, we get the dialog box asking about installing
the printer and the checkbox to set as default, but when proceeding
with the install the dialog disappears and no printer installation
commences.
Back-revving Firefox to v35.0.1 allows printer installation to
complete. Java ranges from 8.25 to 8.40 and the problem appears
across all, no correlation between java version and the problem
appearing-- only the FF version.
Is anyone else seeing this issue?
Thx,
XX
Yes, I have reported it to Novell. I'll let you know what happens but as usual, if you are able to open a SR then plz go ahead.
Thomas

IPrint Appliance can the IP and/or Certs be changed on the iPrintAppliance?

Hope someone can help:
we recently replaced a few of our printers with new models..kept the same iprint printer definition - simply updated the...

iPrint Appliance
Version: 1.1.0.407-HP.416
I cannot print to any Ricoh Multi-Function printers from Droid phones or iPads.
I can print to all...

IPrint Appliance & PCounter

They are not very descriptive (yes, had the same answer by mail, means not
much)
(7/23/2013) Please note that future development of this product will be
limited to page counting fixes only. No new features or infrastructure
changes will be made.
Did anybody try to run it on iPrint Appliance 1.01
If it does not work, are there any alternatives? Or moving to MS Printing is
the only option?
Seb

"Sebastian Cerazy" Wrote in message:
> They are not very descriptive (yes, had the same answer by mail, means not
> much)
>
> (7/23/2013) Please note that future development of this product will be
> limited to page counting fixes only. No new features or infrastructure
> changes will be made.
>
> Did anybody try to run it on iPrint Appliance 1.01
Theoretically it might work but it certainly won't be supported by
either A.N.D. Technologies (developer of Pcounter) since
development has ended of Pcounter for Novell.
Incidentally I note the Installation Guide for latest version of
Pcounter for Novell (5.52) refers to SLES10 SP3 + OES2 SP1 (which
is an invalid combination and was never supported by Novell!) so
I suspect OES11 is also not supported.
> If it does not work, are there any alternatives? Or moving to MS Printing is
> the only option?
There are a few alternatives available but the one that seems to
be the most popular is PaperCut.
HTH.
Simon
Novell Knowledge Partner
----Android NewsGroup Reader----
http://www.piaohong.tk/newsgroup

IPrint Appliance 1.0.1 import configuration , uploading

I export iprint configuration by using TID 7014187, and import it to iPrint appliance 1.0.1.
this zip file only 112KB, but it keep "uploading" status more than 30 mins...
Who success import configuration filr to new Appliance ?
thanks!!
wyld

Rickb wrote:
> wyldkao wrote:
>
>>
>> I export iprint configuration by using TID 7014187, and import it to
>> iPrint appliance 1.0.1.
>> this zip file only 112KB, but it keep "uploading" status more than 30
>> mins...
>>
>> Who success import configuration filr to new Appliance ?
>>
>> thanks!!
>>
>> wyld
>>
>>
>
> Did yours ever finish? I am sitting here in the same boat. Just keeps
> processing. My export was larger and did include the print drivers. I see
> java cranking away in top for a while but that has settled down and prett
> much nothing else going on. Is there an update log or something to see
> what it is doing?
I have attempted 3 times a run at this for the upgrade. This should not be
this hard. I have watched during the upgrade at the messages file and see
all kinds of directory errors basically I think about the tree. It just runs
on and on. I am wondering if anyone knows what this file is? Is this the
file the directory would be restored from? mobileappliancedib.db
Thanks

IPrint Appliance 1.1 - Beta program planned

Hi All,
We are working on Novell iPrint Appliance 1.1 which will have new features in the areas of Rendering, Mobile Apps, Appliance Deployment & manageability.
For the same, we plan to have a beta program run from early April to end of May 2014.
If you are interested in joining this beta program, please have this short survey filled before 24th March.
Regards,
Devadas K
Novell iPrint Team

kdevadas,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Iprint appliance 1.01 launched

Iprint appliance 1.01 launched, with Xen image too.
See ; Novell does listens to customers !

stelgenkamp wrote:
> Iprint appliance 1.01 launched, with Xen image too.
Release Details
.. Support for deployments using the Xen Project and Microsoft Hyper-V
hyper visors
.. Support for Windows 2012 R2 server
.. Server-side support for Windows 8.1 and Mac OSX 10.9
.. Support for local rendering with PS and PCL drivers which adds
flexibility for printer language support
.. Rendering quality and conversion improvements for multiple document
types including PDF, JPG images, Word and Excel spreadsheets
.. Improved scalability and performance for NetIQ eDirectory and Windows
Active Directory user import
.. General bug fixes
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

Stuck at "Setting up a new iPrint Appliance, please wait .."

Hi!
iPrint Appl 1.0.1 and a new setup and stuck at "Setting up a new iPrint Appliance, please wait ..." (Configuring...), for hours. I remember it didn't take a long time with 1.0.0 to set up.
Mh. Any experiences already?
More thanks, Alar.

Hi!
Just to end this thread. Seems to it (problem described below) was caused by separate (second) hard disk presence which had installation from old system and even choosing a New install ... it stuck at it.
New install with "clean" second disk solved the problem, but, seems to, this second disk is no needed for iPrint Appliance, anyway.
https://forums.novell.com/novell-pro...appliance.html
Alar.

Iprint Appliance Import Users Swipe card ID for Papercut

Hi All
We are using the iPrint Appliance in conjunction with Papercut follow me printing. The idea is that everyone prints to the one iPrint Printer and whichever printer the user goes to they swipe their ID card and Papercut redirects their job to that printer. Our issue is that the swipe card number for each user is stored in the Serial Number attribute in eDirectory. As the iPrint appliance is it's own Edirectory tree when we do the iPrint LDAP import we need to import the Serial Number attribute as well so Papercut has access to the each users swipe card number. It does not matter which attribute the number is imported to as I can adjust that at the Papercut end. Under the Users section on the LDAP import screen it lists the Internal ID to ldap attribute list. I have tried changing this list to get the sync to import to the Card ID number from the Serial Number attribute to the phone, Description, even first and last name but even left at the defaults the only attribute it will sync is the Last Name.
If anyone has any idea where I could go next to try something or even get a log file to try and trace what is going on.
Many Thanks in advance
Graeme

Glad to hear you were able to work around the issue. I have passed along an enhancement request to engineering. I am not sure if it something that will be addressed, but if it is, I'll update this post.

Installing samba on iPrint Appliance 1.1

Hi all,
Just wondering if there is a way to set up samba on the iPrint Appliance?
We have Papercut set up on the iPrint Appliance and I am attempting to set up the Web Print functionality of Papercut. However this requires a samba share to be created on the iPrint Appliance server (/vastorage/papercut/server/data/web-print-hot-folder) that is to be accessed by a Windows server acting as an intermediary for print jobs for users that are using their own BYOD notebooks.
I am assuming this is not a supported configuration for the iPrint Appliance as it isn't a listed configurable system service in the iPrint Appliance web console nor installed by default, but I'm just throwing this out there in case there is a way.
Regards,
Matt

Thanks Simon.
I'll definitely raise it with Papercut.
Originally Posted by smflood
On 07/04/2015 03:56, xvastx wrote:
> Just wondering if there is a way to set up samba on the iPrint
> Appliance?
>
> We have Papercut set up on the iPrint Appliance and I am attempting to
> set up the Web Print functionality of Papercut. However this requires a
> samba share to be created on the iPrint Appliance server
> (/vastorage/papercut/server/data/web-print-hot-folder) that is to be
> accessed by a Windows server acting as an intermediary for print jobs
> for users that are using their own BYOD notebooks.
>
> I am assuming this is not a supported configuration for the iPrint
> Appliance as it isn't a listed configurable system service in the iPrint
> Appliance web console nor installed by default, but I'm just throwing
> this out there in case there is a way.
You'd need to grab and install the Samba-related packages from matching
SLES media (or installed server) but as you rightly assume this would
not be supported by Novell (so would have implications if any security
issues reported and/or subsequently patched).
It's probably worth both contacting PaperCut and logging an enhancement
request with Novell[1].
HTH.
[1] www.novell.com/rms
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

IPrint Appliance 1.1 detailed upgrade instructions

So I've read through what documentation I found but I must have missed the section with details upgrade instructions from 1.0.1 to 1.1. If I did could someone point me to them. If I didn't is anyone willing to take a crack at creating some. Mobile printing is just starting to catch on here and I want the new features but I don't want downtime.
Any help is appreciated, even if it's just hey bone head read it here. Thanks.
Or is it exactly the same as 1.0.1?

Originally Posted by nlandas
Thanks Thomas,
The IP info and username and password info is easy to duplicate. Is there an easy way to look up and write down the remainder like disk setup?
-Nyle
That question sounds really novice to me. What I mean to say is I'm confused on the disk portion more specifically. On Filr you have to create separate disks to store information with Mobile iPrint I don't remember doing that. My VM only shows one 40GB disk attached to it. The video simply shows selecting use hard disk and continuing on. It also says on the warning message that says don't store data on the system disk (Which apparently, I am doing on the appliance already) the video says to just continue anyway.
Then it shows importing the configuration into it.
So once I've done that since I have all the IP and username info, etc. How do I add another hard disk to store data. I was pretty certain I set up the appliance as per documentation but obviously if I was supposed to add another virtual disk, I did something wrong.

NTFS ACLs migration

Hello,
We are trying to perform a migration from an NTFS filesystem to Oracle Content Services.
We need to migration metadata such as access rights and security from the files contained in the NTFS filesystem (combined with AD), to Content Services and OID.
We have seen that there were several options to do this (files permissions migration), but we would like to operate rapidly, due to the large amount of files (about a million).
These options were:
- use of cmsdk
- use of webservices (Content Services )
We are also actively trying to find any kind of solution that could help us in the process.
thanks in advance

The estimate may nit be very accurate, I've seen it go up, then down to half, then with one minute remaining take an hour or 2 to finish.
1. How are they networked, Wifi or Ethernet?
2. Only way I know would be to install OSX on rhe external drive, then boot from the external drive.
Sure seems too long though, have you made sure both drives are not in need of repairing?

IPrint Appliance: miggui ACL migration

Similar Messages

Maybe you are looking for