IPrint drivers not overriding older driver on client
Hi
Using iPrint client (v540) and HP printers.
We installed printers at image time using a command line.
Printers were giving problems (spooler crashing), so we wanted to change to UPD.
So, we modified the drivers on the IPP servers to be UPD.
I then created a policy to push the printer out again, and update the driver.
The policy IS applied successfully, but when I check the printer it still says it is using the old driver, not the UPD.
I am not specifying anything in the policy other than:
- The IPP printer path
- The checkbox for "Update iPrint printer driver while installing the printer"
The policy is enforced and is being applied successfully (checked form device and ZCC).
Any advice as to why it is not using the new driver?
Thanks.
ClemClark,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Similar Messages
-
I have new HD 750GB Hybrid in 2008 Macbook Pro 17" w/ Snow Leopard 10.6.8 connected to old Hard drive(250GB that had 10.5.8 on it at time of failure) via SATA cable to USB port with external power source.. Computer not acknowledging old HD at all in Disk Utility or otherwise (that I'm aware of)..Do I need to partition New HD and load old(10.5.8) onto partition to recognize older drive for data recovery? Thanks Wayno08
You do not need to load 10.5.8 onto your new drive in order for a 10.6.8 system to see the contents of a 10.5.8 system.
You might want to check out the hard drive troubleshooting bootk in the downloads section of this web site:
http://scsc-online.com
They also sell a product named Phoenix that can do OS extraction and volume copying/cloning, but to be honest I don't know if it's appropriate in this case.
I would suggest the following:
Open up Terminal.app (under utilities) and type "diskutil list" without the quotes. This is the command line version of Disk Utility. If the external drive doesn't show up at all, then it's likely not connected properly, not getting power, or just plain dead. If it shows up with only a devce name like disk0s16 but no volume it means the drive is seen, the OS just can't make sense of it.
Assuming the drive shows up, I would try to boot off the original installl disks for the system and run Disk Utility from that. I'm assuming the drive will show up. You'll want to select the option to repair the drive and then perform the option to repair the permissions.
If the unit isn't showing up, as per step 1, try a different USB port. More importantly with your unit, try it on another side of the unit if possible. If you read the book I referenced above, some of those units have I/O boards that are separated from the logic board. If the cable from the logic board to the I/O card goes bad or has problems, which isn't all that uncommon, some or all of the ports on the I/O card may appear to be bad as well. If you use a USB port on another side, it would be routing out of a completely different I/O path, so that's a potential problem.
If the drive is only seen with a device name such as disk0s16, it's likely either the index files are corrupt beyond Disk Utility's ability to see them. The only thing that I think would help would be a product named DIsk Warrior, but I can't guarantee that.
Disk Warrior can be found at:
http://www.alsoft.com/diskwarrior/
The company that I linked in the first link above also makes a product named Scannerz that does HD and system testing. The Scannerz/Disk Warrior combination make a good pair because the complement each other....Scannerz does what Disk Warriror can't and Disk Warrior does what Scannerz can't. However, at this point I'm not too sure getting a tool like Scannerz would be of much use because it sounds like the damage has already been done.
Let us know what happens. -
my older iPod my husband wants to use and his netbook does not have cd drive. How do I down load iPod and iTunes info for this product so he can now use it?
Your question(s) is/are a little hard to understand. So your husband has an iPod as well as a netbook and he wants to be able to sync iPod with this netbook is that correct? If so, he'll need to first download and install iTunes assuming the netbook is running some version of Windows such as 7, Vista, or XP.
http://www.apple.com/itunes/download/
As for importing or ripping music, he'll have to either use an external CD/DVD drive that is attached via USB or rip the songs to another PC you have with a built in CD/DVD drive. Once you have imported them to the other computer, you can transfer the songs to an external hard drive or to his iTunes library via Home Sharing.
If this isn't quite what you were looking for, please clarify.
B-rock -
I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!
Have you looked on Lexmark's support site?
http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US -
I recently upgraded my laptop to one from the same vendor so all I had to do was to upgrade a few drivers on the hard drive. Unfortunately my copy of ADE is not so cooperative. Every time I try to download an e-book I get the message "E_AUTH_BAD_DEVICE_KEY_OR_PKCS12". Uninstalling ADE (all three versions) along with cleaning the registry does not clear the error. And I cannot de-authorize and reauthorize my new laptop as the de-authorize option is greyed out. Anyone else encounter this issue?
Problem solved finally. Used regedit.
https://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html -
Windows 8 does not see hard drive on Satellite A200
Windows 8 does not see hard drive on A200.
How to install?> with Vista works fine,
Does this mean that Vista is still installed or is HDD visible while Vista installation setup?
Some notebooks HDD controller needs SATA driver in order to be able to install system.
Sat A200 is a little bit older but I dont think the SATA driver is needed here to install Win 8.
I guess you didnt any SATA drivers to install the Vista right?
Set the BIOS to default and try to boot again using Win 8. -
Windows 7 iPrint printers not completely installed
Good day!
We are having a problem right now where printers pushed out by Zenworks policies and iPrint are not getting completely installed. A user will try to print and it will not. The only way to get it to work is to right-click the printer object in the Devices and Printers window and click "Printer Properties". At that time, a window will come up saying that the driver for such and such printer is not installed and will ask if you want to install it now only to click Next Next Finish and voila! The driver was downloaded to the computer with the policy and the object was created but it's as if the printer install wasn't quite complete. I've seen this problem intermittently in the past but now that we're doing our summer re-image in our school district, I'm seeing it a lot more. Any ideas as to what might be causing this and what I can do to resolve it? Thanks in advance!
Windows 7 64-Bit
Zenworks 11.3No - but you should download/install ThinkVantage System Update (for Windows 7) and have it download and install the proper T43 drivers for Windows 7. Then you'll have sound. :^) That's what I did for my T43. All works fine.
Life is just one big "Beta Test"
Happy owner of a T43 (Windows 7) and T23 (Windows XP) -
Failure when connecting MS SQL SERVER from ODI ! could not load JDBS driver
i have some trouble with connecting MS SQL SERVER from ODI.
I have already downland jdbs driver 3.0 (and 2.0 ) and copy the sqljdbc4.jar to D:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers( where the oracle jdbs driver is already exitst )....but i have this error :
could not load JDBS driver class..
thanksAfter more investigation and even more chocolate, we've identified the problem and it's now working. For anyone else who strikes this problem in future, here's something to check/consider/try:
Even though Squirrel SQL Client was connecting and working ok using the MS JDBC driver (v 3.0), it recorded this in its logs:
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the INTERSECT operation.
We've found that the open source jTDS driver does not have the same issue as the Microsoft one.
We've installed the current jTDS driver, recorded the driver name (net.sourceforge.jtds.jdbc.Driver) and the JDBC URL (jdbc:jtds:sqlserver://<hostname>:1433/<database>) and the connection is now working fine.
Hope this helps other people...
Thanks to those of you who offered suggestions and things to check...much appreciated.
Robyn -
Presario R4000 Laptop Audio Drivers not working
So, I've got this older Laptop, the Compaq Presario R4000.
It was giving me a really hard time with software with the original OS and stuff, so I decided to format it and install my own Windows XP Professional on it, as opposed to the Compaq-ware filled XP Home that was already on it.
So I formatted, installed Windows, and found the driver page for it.
I Flashed the BIOS despite the fact that I don't think it was necessary, but I wasn't sure.
I installed the graphics drivers no problem.
Installed the wireless device drivers, though not sure if these are working, but it's not significant.
What is significant however, is that the Audio Drivers provided on the site do not work at all. I looked for other drivers, looked for other driver versions for the OSs and various other Presario models, but nothing has worked.
I don't know what the problem is. I'm really hoping someone is able to help!
Thanks in advance.
Error Message:
BTW, I should mention what the error message I'm getting is.
A command window pops up running the following command:
c:\swsetup\SP29873>start /min \swsetup\audio\setup.exe /s
I tried fiddling with the batch file that was running these commands to see if that would help, but it doesn't.
Still always get the same error message:
"Windows cannot find '\swsetup\audio\setup.exe'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."I have the same error message, have you figured it out yet? If yes, please tell me what you did <text deleted> Thanks
Message Edited by WendyM on 09-07-2009 08:48 AM -
Finding an older driver version for LaserJet Professional M1212nf MFP
Dear all,
I am looking for an older driver version for our HP LaserJet Professional M1212nf printer, since with our SAP-Citrix system I could only print reports from that version. The version is 20100331 (1.0.1.19178). Is there any place where I could find this driver version? If not, is there any way to transfer the printer driver to the new computer?
In the meantime I found the HP FTP path where various drivers can be found: ftp://ftp.hp.com/pub/. However, I don't know where I could find the driver I am asking for. Could please someone help me with this?
Best regards,
Radu@RaduPopa ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.
I work for HP. However I speak only for myself, not for HP nor anyone else -
SYSPrep install for Win 7 SP 1 Drivers not installing correclty
I am setting up x230s with Win 7 SP 1 64 bit. Sysprep using dpinst. and setupcomplete.cmd to install drivers that need silent installs. I have installed chipset, AMT chipset for Intel Engine, USB 3, multi carder reader, etc..
All drivers install ok except Card Reader, looking into it I have had to edit config file for install to change hardware ID from 823 to 822. However, card reader does not work when i insert an SD card. Also Any usb drive I plug in is not recognized, I get the error in Device Manager No Driver Found. I have imaged other model, T420, X220, T500, T520. Consistently the Card Reader install is an issue. So I am looking for help in installing drivers with sysprep and unattend.xml, with setupcomplete.cmd. We are rolling out a few hundred for Win 7 64 bit. We cannot use system update to resolve all the drivers. So any help on this topic is appreciated..It might also be helpful to know what you are using for your deployment utility. I say this because it might be beneficial to check out the Microsoft Deployment Toolkit for your deployment solution since it makes driver injection that much more managed and simplified. A great blog article which outlines the process of managing Out-of-Box drivers with model specific driver groups can be found on TechNet here.
As a high-level overview, MDT allows you to create hardware independent images which will in turn greatly streamline your deployment process. The Springboard Series on TechNet has a great deal of information to help you learn how to create hardware independent images, specifically. For now, I’ll just give you a few key benefits.
First off, MDT is free and can even integrate directly with Windows Deployment Services (WDS) and can be setup to PXE boot for both a Sysprep and Capture task sequence and lite-touch deployment.
Next, MDT can be used to deploy Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008, Windows Server 2008R2, Windows Server 2012 and Windows Server 2012R2. Using MDT, you can easily add both applications and drivers, manage Windows updates, create task sequences, specify selection profiles for easy driver injection, prompt for a computer name, join a domain, add a KMS or MAK product key, create an administrator account, specify time zone, etc. You can also import all user data into the new environment using the User State Migration Tool (also free). In addition to creating standard client task sequences, as stated above, you can create sysprep and capture task sequences that will do just that – sysprep and capture an image of your reference machine. To become familiar with the process of using MDT, you might want to check out these videos from the Springboard Series page on TechNet:
Deployment Day Session 1: Introduction to MDT 2012
Deployment Day Session 2: MDT 2012 Advanced
As a direct answer to your question, if you are currently using Windows Deployment Services (WDS) to push out your images you will want to check out the adding drivers to WDS Server TechNet wiki article or if you are just trying to sysprep your image and keep all installed drivers you will want to look into the PersistAllDeviceInstalls switch for your
unattend file.
Hope this helps and keep us posted!
Jessica
Windows Outreach Team -- IT Pro -
Iprint and HP universal print driver
J am currently installing windows 7 machines. I have netware 6.5 with sp8 and all iprint patches znc thd lztdxt 6r bit client. I used the HP universal pcl5 driver 5.5 but had a problem printing excel documents. I updated to version 5.7 from HP website and that fixed the problem with the spreadsheets but I have another app that uses a ini file which selects what tray to print from. It prints using the types of paper and not the tray numbers. However since upgrading to 5.7 it prints everything from the plain tray. Any suggestions or links to recommended hp upd would be much appreciated
dxw,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com -
"package javax.xml .rpc does not exist" error when compiling client jar
When I try to compile the web services client jar with either the clientgen or the <client> element of servicegen I get the following error "package weblogic.webservice.core.rpc does not exist"
Here is the error output
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHService_Impl.java:10: package weblogic.webservice.core.rpc does not exist
[servicegen] extends weblogic.webservice.core.rpc.ServiceImpl
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHService.java:9: package javax.xml.rpc does not exist
[servicegen] public interface OSHService extends javax.xml.rpc.Service{
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHService.java:11: package weblogic.webservice.context does not exist
[servicegen] weblogic.webservice.context.WebServiceContext context();
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHService.java:13: package weblogic.webservice.context does not exist
[servicegen] weblogic.webservice.context.WebServiceContext joinContext()
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHService.java:14: package weblogic.webservice.context does not exist
[servicegen] throws weblogic.webservice.context.ContextNotFoundException;
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHService.java:16: package javax.xml.rpc does not exist
[servicegen] com.onexchange.tools.osh.client.OSHServicePort getOSHServicePort() throws javax.xml.rpc.ServiceException;
[servicegen]
^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_clie
nt.jar-610368643\com\onexchange\tools\osh\client\OSHService.java:18: package javax.xml.rpc does not exist
[servicegen] com.onexchange.tools.osh.client.OSHServicePort getOSHServicePort(String username, String password) throws javax.xml.rpc.ServiceException;
[servicegen]
^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHServicePort_Stub.java:9: package weblogic.webservice.core.rpc does not exist
[servicegen] extends weblogic.webservice.core.rpc.StubImpl
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_clie
nt.jar-610368643\com\onexchange\tools\osh\client\OSHServicePort_Stub.java:12: package weblogic.webservice does not exist
[servicegen] public OSHServicePort_Stub( weblogic.webservice.Port _port ){
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHService_Impl.java:9: com.onexchange.tools.osh.client.OSHService_Impl should be declared abstract; it does not define context() in com.onexchange.tools.osh.client.OSHService_Impl
[servicegen] public class OSHService_Impl
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_clie
nt.jar-610368643\com\onexchange\tools\osh\client\OSHService_Impl.java:40: cannot
resolve symbol
[servicegen] symbol : method _getPort (java.lang.String)
[servicegen] location: class com.onexchange.tools.osh.client.OSHService_Impl
[servicegen] new com.onexchange.tools.osh.client.OSHServicePort_Stub( _g
etPort( "OSHServicePort" ) );
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHService_Impl.java:49: cannot
resolve symbol
[servicegen] symbol : method _setUser (java.lang.String,java.lang.String,com.on
exchange.tools.osh.client.OSHServicePort)
[servicegen] location: class com.onexchange.tools.osh.client.OSHService_Impl
[servicegen] _setUser( username, password, getOSHServicePort() );
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHServicePort_Stub.java:24: ca
nnot resolve symbol
[servicegen] symbol : method _wrap (java.lang.String)
[servicegen] location: class com.onexchange.tools.osh.client.OSHServicePort_Stub
[servicegen] args.put( "string", wrap( string ) );
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHServicePort_Stub.java:25: ca
nnot resolve symbol
[servicegen] symbol : method _wrap (java.lang.String)
[servicegen] location: class com.onexchange.tools.osh.client.OSHServicePort_Stub
[servicegen] args.put( "string0", wrap( string0 ) );
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHServicePort_Stub.java:27: ca
nnot resolve symbol
[servicegen] symbol : method _invoke (java.lang.String,java.util.HashMap)
[servicegen] location: class com.onexchange.tools.osh.client.OSHServicePort_Stub
[servicegen] java.lang.Object result = invoke( "login", _args );
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHServicePort_Stub.java:29: pa
ckage javax.xml.rpc does not exist
[servicegen] } catch (javax.xml.rpc.JAXRPCException e) {
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHServicePort_Stub.java:31: pa
ckage javax.xml.rpc.soap does not exist
[servicegen] } catch (javax.xml.rpc.soap.SOAPFaultException e) {
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHServicePort_Stub.java:44: ca
nnot resolve symbol
[servicegen] symbol : method _wrap (java.lang.String)
[servicegen] location: class com.onexchange.tools.osh.client.OSHServicePort_Stub
[servicegen] args.put( "string", wrap( string ) );
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHServicePort_Stub.java:45: ca
nnot resolve symbol
[servicegen] symbol : method _wrap (java.lang.String)
[servicegen] location: class com.onexchange.tools.osh.client.OSHServicePort_Stub
[servicegen] args.put( "string0", wrap( string0 ) );
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHServicePort_Stub.java:47: ca
nnot resolve symbol
[servicegen] symbol : method _invoke (java.lang.String,java.util.HashMap)
[servicegen] location: class com.onexchange.tools.osh.client.OSHServicePort_Stub
[servicegen] java.lang.Object result = invoke( "oshRequest", _args );
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHServicePort_Stub.java:49: pa
ckage javax.xml.rpc does not exist
[servicegen] } catch (javax.xml.rpc.JAXRPCException e) {
[servicegen] ^
[servicegen] C:\Documents and Settings\fkhan\Local Settings\Temp\OSHService_client.jar-610368643\com\onexchange\tools\osh\client\OSHServicePort_Stub.java:51: pa
ckage javax.xml.rpc.soap does not exist
[servicegen] } catch (javax.xml.rpc.soap.SOAPFaultException e) {
[servicegen] ^
[servicegen] 22 errors
[servicegen] java.io.IOException: Compiler failed executable.exec
[servicegen] at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(Comp
ilerInvoker.java:470)
[servicegen] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvok
er.java:329)
[servicegen] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvok
er.java:337)
[servicegen] at weblogic.webservice.tools.build.internal.CompilerHelper.compi
leFiles(CompilerHelper.java:80)
[servicegen] at weblogic.webservice.tools.build.internal.ClientGenImpl.compil
eStubs(ClientGenImpl.java:608)
[servicegen] at weblogic.webservice.tools.build.internal.ClientGenImpl.genera
teStub(ClientGenImpl.java:553)
[servicegen] at weblogic.webservice.tools.build.internal.ClientGenImpl.doClie
ntGenFromEAR(ClientGenImpl.java:502)
[servicegen] at weblogic.webservice.tools.build.internal.ClientGenImpl.run(Cl
ientGenImpl.java:348)
[servicegen] at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.g
enerateClient(ServiceGenTask.java:597)
[servicegen] at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.e
xecute(ServiceGenTask.java:195)
[servicegen] at org.apache.tools.ant.Task.perform(Task.java:341)
[servicegen] at org.apache.tools.ant.Target.execute(Target.java:309)
[servicegen] at org.apache.tools.ant.Target.performTasks(Target.java:336)
[servicegen] at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
[servicegen] at org.apache.tools.ant.Project.executeTargets(Project.java:1255
[servicegen] at org.apache.tools.ant.Main.runBuild(Main.java:609)
[servicegen] at org.apache.tools.ant.Main.start(Main.java:196)
[servicegen] at org.apache.tools.ant.Main.main(Main.java:235)
BUILD FAILED
Below is the -debug from the ant task immediately following:
<target name="web-service" depends="osh_bean_jar">
<servicegen
destEar="${build}/osh_service"
warName="osh_service.war"
contextURI="web_services" >
<service
ejbJar="${dist}/osh_bean.jar"
targetNamespace="http://www.bea.com/webservices/basic/statelesSession"
serviceName="OSHService"
serviceURI="/OSHService"
generateTypes="True"
expandMethods="True"
style="rpc">
<client
packageName="com.onexchange.tools.osh.client" />
</service>
</servicegen>
</target>
Apache Ant version 1.5.3 compiled on August 13 2003
Buildfile: \onexv3.x\src\antfile\osh.xml
Detected Java version: 1.4 in: C:\bea\JDK141~1\jre
Detected OS: Windows 2000
+User task: propertyfile org.apache.tools.ant.taskdefs.optional.PropertyFile
+User task: vsscheckin org.apache.tools.ant.taskdefs.optional.vss.MSVSSCHECKIN
+User task: sql org.apache.tools.ant.taskdefs.SQLExec
+User task: cvspass org.apache.tools.ant.taskdefs.CVSPass
+User task: p4reopen org.apache.tools.ant.taskdefs.optional.perforce.P4Reopen
+User task: csc org.apache.tools.ant.taskdefs.optional.dotnet.CSharp
+User task: dirname org.apache.tools.ant.taskdefs.Dirname
+User task: wlrun org.apache.tools.ant.taskdefs.optional.ejb.WLRun
+User task: servicegen weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask
+User task: p4label org.apache.tools.ant.taskdefs.optional.perforce.P4Label
+User task: p4revert org.apache.tools.ant.taskdefs.optional.perforce.P4Revert
+User task: replaceregexp org.apache.tools.ant.taskdefs.optional.ReplaceRegExp
+User task: ddcreate weblogic.ant.taskdefs.build.DDCreateTask
+User task: get org.apache.tools.ant.taskdefs.Get
+User task: jjtree org.apache.tools.ant.taskdefs.optional.javacc.JJTree
+User task: sleep org.apache.tools.ant.taskdefs.Sleep
+User task: jarlib-display org.apache.tools.ant.taskdefs.optional.extension.JarLibDisplayTask
+User task: dependset org.apache.tools.ant.taskdefs.DependSet
+User task: zip org.apache.tools.ant.taskdefs.Zip
+User task: patch org.apache.tools.ant.taskdefs.Patch
+User task: jspc weblogic.ant.taskdefs.j2ee.Jspc
+User task: style org.apache.tools.ant.taskdefs.XSLTProcess
+User task: test org.apache.tools.ant.taskdefs.optional.Test
+User task: tstamp org.apache.tools.ant.taskdefs.Tstamp
+User task: unwar org.apache.tools.ant.taskdefs.Expand
+User task: vsshistory org.apache.tools.ant.taskdefs.optional.vss.MSVSSHISTORY
+User task: icontract org.apache.tools.ant.taskdefs.optional.IContract
+User task: cvschangelog org.apache.tools.ant.taskdefs.cvslib.ChangeLogTask
+User task: p4submit org.apache.tools.ant.taskdefs.optional.perforce.P4Submit
+User task: ccmcheckin org.apache.tools.ant.taskdefs.optional.ccm.CCMCheckin
+User task: p4change org.apache.tools.ant.taskdefs.optional.perforce.P4Change
+User task: bzip2 org.apache.tools.ant.taskdefs.BZip2
+User task: wspackage weblogic.ant.taskdefs.webservices.wspackage.WSPackage
+User task: p4delete org.apache.tools.ant.taskdefs.optional.perforce.P4Delete
+User task: vssadd org.apache.tools.ant.taskdefs.optional.vss.MSVSSADD
+User task: javadoc org.apache.tools.ant.taskdefs.Javadoc
+User task: translate org.apache.tools.ant.taskdefs.optional.i18n.Translate
+User task: signjar org.apache.tools.ant.taskdefs.SignJar
+User task: vajload org.apache.tools.ant.taskdefs.optional.ide.VAJLoadProjects
+User task: jarlib-available org.apache.tools.ant.taskdefs.optional.extension.JarLibAvailableTask
+User task: wsdd-merge weblogic.ant.taskdefs.webservices.autotype.DDMerge
+User task: WsdlToDotnet org.apache.tools.ant.taskdefs.optional.dotnet.WsdlToDotnet
+User task: buildnumber org.apache.tools.ant.taskdefs.BuildNumber
+User task: jpcovmerge org.apache.tools.ant.taskdefs.optional.sitraka.CovMerge
+User task: compliance weblogic.ant.taskdefs.webservices.compliance.Compliance
+User task: ejbjar org.apache.tools.ant.taskdefs.optional.ejb.EjbJar
Could not load class (weblogic.ant.taskdefs.perforce.P4Changes) for task p4changes
+User task: war org.apache.tools.ant.taskdefs.War
Could not load a dependent class (com/starbase/starteam/Item) for task stlist
+User task: rename org.apache.tools.ant.taskdefs.Rename
+User task: sequential org.apache.tools.ant.taskdefs.Sequential
+User task: serverdeploy org.apache.tools.ant.taskdefs.optional.j2ee.ServerDeploy
+User task: wsdlgen weblogic.ant.taskdefs.webservices.wsdlgen.WSDLGen
+User task: property org.apache.tools.ant.taskdefs.Property
+User task: move org.apache.tools.ant.taskdefs.Move
+User task: copydir org.apache.tools.ant.taskdefs.Copydir
+User task: cccheckin org.apache.tools.ant.taskdefs.optional.clearcase.CCCheckin
+User task: wljspc org.apache.tools.ant.taskdefs.optional.jsp.WLJspc
+User task: fixcrlf org.apache.tools.ant.taskdefs.FixCRLF
Could not load a dependent class (com/oroinc/net/SocketClient) for task telnet
+User task: sosget org.apache.tools.ant.taskdefs.optional.sos.SOSGet
Could not load class (weblogic.ant.taskdefs.perforce.P4VersionString) for task p4versionstring
+User task: pathconvert org.apache.tools.ant.taskdefs.PathConvert
+User task: autotype weblogic.ant.taskdefs.webservices.javaschema.JavaSchema
+User task: record org.apache.tools.ant.taskdefs.Recorder
+User task: p4sync org.apache.tools.ant.taskdefs.optional.perforce.P4Sync
+User task: exec org.apache.tools.ant.taskdefs.ExecTask
+User task: p4edit org.apache.tools.ant.taskdefs.optional.perforce.P4Edit
+User task: manifest org.apache.tools.ant.taskdefs.ManifestTask
+User task: maudit org.apache.tools.ant.taskdefs.optional.metamata.MAudit
+User task: antlr org.apache.tools.ant.taskdefs.optional.ANTLR
+User task: netrexxc org.apache.tools.ant.taskdefs.optional.NetRexxC
Could not load a dependent class (com/oroinc/net/ftp/FTP) for task ftp
+User task: jpcovreport org.apache.tools.ant.taskdefs.optional.sitraka.CovReport
+User task: wsdl2service weblogic.ant.taskdefs.webservices.wsdl2service.WSDL2Service
+User task: execon org.apache.tools.ant.taskdefs.ExecuteOn
+User task: ccmcheckout org.apache.tools.ant.taskdefs.optional.ccm.CCMCheckout
+User task: ant org.apache.tools.ant.taskdefs.Ant
+User task: xmlvalidate org.apache.tools.ant.taskdefs.optional.XMLValidateTask
+User task: xslt org.apache.tools.ant.taskdefs.XSLTProcess
+User task: iplanet-ejbc org.apache.tools.ant.taskdefs.optional.ejb.IPlanetEjbcTask
+User task: ccmcheckintask org.apache.tools.ant.taskdefs.optional.ccm.CCMCheckinDefault
+User task: gzip org.apache.tools.ant.taskdefs.GZip
+User task: native2ascii org.apache.tools.ant.taskdefs.optional.Native2Ascii
+User task: starteam org.apache.tools.ant.taskdefs.optional.scm.AntStarTeamCheckOut
+User task: ear org.apache.tools.ant.taskdefs.Ear
+User task: input org.apache.tools.ant.taskdefs.Input
+User task: wlpath weblogic.ant.taskdefs.WLPath
+User task: pointbase weblogic.ant.taskdefs.pointbase.PointBase
+User task: rmic weblogic.ant.taskdefs.j2ee.Rmic
+User task: checksum org.apache.tools.ant.taskdefs.Checksum
+User task: mail org.apache.tools.ant.taskdefs.email.EmailTask
+User task: loadfile org.apache.tools.ant.taskdefs.LoadFile
+User task: wsgen weblogic.ant.taskdefs.webservices.wsgen.WSGenTask
+User task: vsscheckout org.apache.tools.ant.taskdefs.optional.vss.MSVSSCHECKOUT
+User task: stylebook org.apache.tools.ant.taskdefs.optional.StyleBook
+User task: soscheckin org.apache.tools.ant.taskdefs.optional.sos.SOSCheckin
+User task: mimemail org.apache.tools.ant.taskdefs.optional.net.MimeMail
+User task: stlabel org.apache.tools.ant.taskdefs.optional.starteam.StarTeamLabel
+User task: gunzip org.apache.tools.ant.taskdefs.GUnzip
+User task: concat org.apache.tools.ant.taskdefs.Concat
+User task: cab org.apache.tools.ant.taskdefs.optional.Cab
+User task: touch org.apache.tools.ant.taskdefs.Touch
+User task: parallel org.apache.tools.ant.taskdefs.Parallel
+User task: splash org.apache.tools.ant.taskdefs.optional.splash.SplashTask
+User task: antcall org.apache.tools.ant.taskdefs.CallTarget
Could not load class (weblogic.ant.taskdefs.ejb.DDInit) for task ddinit
+User task: cccheckout org.apache.tools.ant.taskdefs.optional.clearcase.CCCheckout
+User task: typedef org.apache.tools.ant.taskdefs.Typedef
+User task: p4have org.apache.tools.ant.taskdefs.optional.perforce.P4Have
+User task: filter org.apache.tools.ant.taskdefs.Filter
+User task: xmlproperty org.apache.tools.ant.taskdefs.XmlProperty
Could not load a dependent class (jdepend/xmlui/JDepend) for task jdepend
+User task: copy org.apache.tools.ant.taskdefs.Copy
+User task: clientgen weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask
+User task: createidl weblogic.ant.taskdefs.iiop.CppIdlSetup
+User task: antstructure org.apache.tools.ant.taskdefs.AntStructure
Could not load a dependent class (com/ibm/bsf/BSFException) for task script
+User task: ccmcreatetask org.apache.tools.ant.taskdefs.optional.ccm.CCMCreateTask
+User task: rpm org.apache.tools.ant.taskdefs.optional.Rpm
+User task: delete org.apache.tools.ant.taskdefs.Delete
+User task: replace org.apache.tools.ant.taskdefs.Replace
+User task: mmetrics org.apache.tools.ant.taskdefs.optional.metamata.MMetrics
+User task: waitfor org.apache.tools.ant.taskdefs.WaitFor
+User task: untar org.apache.tools.ant.taskdefs.Untar
+User task: loadproperties org.apache.tools.ant.taskdefs.LoadProperties
+User task: wldeploy weblogic.ant.taskdefs.management.WLDeploy
+User task: available org.apache.tools.ant.taskdefs.Available
+User task: echoproperties org.apache.tools.ant.taskdefs.optional.EchoProperties
Could not load a dependent class (junit/framework/TestListener) for task junit
Could not load a dependent class (com/starbase/starteam/Item) for task stcheckin
+User task: vajexport org.apache.tools.ant.taskdefs.optional.ide.VAJExport
Could not load a dependent class (com/starbase/starteam/Item) for task stcheckout
+User task: bunzip2 org.apache.tools.ant.taskdefs.BUnzip2
+User task: copyfile org.apache.tools.ant.taskdefs.Copyfile
+User task: wlserver weblogic.ant.taskdefs.management.WLServer
+User task: vsscreate org.apache.tools.ant.taskdefs.optional.vss.MSVSSCREATE
+User task: wlconfig weblogic.ant.taskdefs.management.WLConfig
+User task: ejbc weblogic.ant.taskdefs.j2ee.Ejbc
+User task: unjar org.apache.tools.ant.taskdefs.Expand
+User task: wsdltodotnet org.apache.tools.ant.taskdefs.optional.dotnet.WsdlToDotnet
+User task: wlcompile weblogic.ant.taskdefs.build.WLCompileTask
+User task: mkdir org.apache.tools.ant.taskdefs.Mkdir
+User task: cvs org.apache.tools.ant.taskdefs.Cvs
+User task: condition org.apache.tools.ant.taskdefs.ConditionTask
+User task: tempfile org.apache.tools.ant.taskdefs.TempFile
+User task: junitreport org.apache.tools.ant.taskdefs.optional.junit.XMLResultAggregator
+User task: taskdef org.apache.tools.ant.taskdefs.Taskdef
+User task: echo org.apache.tools.ant.taskdefs.Echo
+User task: ccupdate org.apache.tools.ant.taskdefs.optional.clearcase.CCUpdate
+User task: java org.apache.tools.ant.taskdefs.Java
+User task: vsslabel org.apache.tools.ant.taskdefs.optional.vss.MSVSSLABEL
+User task: renameext org.apache.tools.ant.taskdefs.optional.RenameExtensions
+User task: basename org.apache.tools.ant.taskdefs.Basename
+User task: javadoc2 org.apache.tools.ant.taskdefs.Javadoc
+User task: tar org.apache.tools.ant.taskdefs.Tar
+User task: vsscp org.apache.tools.ant.taskdefs.optional.vss.MSVSSCP
+User task: vajimport org.apache.tools.ant.taskdefs.optional.ide.VAJImport
+User task: setproxy org.apache.tools.ant.taskdefs.optional.net.SetProxy
+User task: p4counter org.apache.tools.ant.taskdefs.optional.perforce.P4Counter
+User task: wlstop org.apache.tools.ant.taskdefs.optional.ejb.WLStop
+User task: ilasm org.apache.tools.ant.taskdefs.optional.dotnet.Ilasm
+User task: soscheckout org.apache.tools.ant.taskdefs.optional.sos.SOSCheckout
+User task: apply org.apache.tools.ant.taskdefs.Transform
+User task: ccuncheckout org.apache.tools.ant.taskdefs.optional.clearcase.CCUnCheckout
+User task: jarlib-resolve org.apache.tools.ant.taskdefs.optional.extension.JarLibResolveTask
+User task: jlink org.apache.tools.ant.taskdefs.optional.jlink.JlinkTask
+User task: cvstagdiff org.apache.tools.ant.taskdefs.cvslib.CvsTagDiff
+User task: javacc org.apache.tools.ant.taskdefs.optional.javacc.JavaCC
+User task: chmod org.apache.tools.ant.taskdefs.Chmod
+User task: pvcs org.apache.tools.ant.taskdefs.optional.pvcs.Pvcs
+User task: jarlib-manifest org.apache.tools.ant.taskdefs.optional.extension.JarLibManifestTask
+User task: jar org.apache.tools.ant.taskdefs.Jar
+User task: sound org.apache.tools.ant.taskdefs.optional.sound.SoundTask
+User task: wlappc weblogic.ant.taskdefs.j2ee.Appc
+User task: mparse org.apache.tools.ant.taskdefs.optional.metamata.MParse
+User task: blgenclient org.apache.tools.ant.taskdefs.optional.ejb.BorlandGenerateClient
+User task: uptodate org.apache.tools.ant.taskdefs.UpToDate
+User task: genkey org.apache.tools.ant.taskdefs.GenerateKey
+User task: javah org.apache.tools.ant.taskdefs.optional.Javah
+User task: ccmreconfigure org.apache.tools.ant.taskdefs.optional.ccm.CCMReconfigure
+User task: fail org.apache.tools.ant.taskdefs.Exit
+User task: unzip org.apache.tools.ant.taskdefs.Expand
+User task: javac org.apache.tools.ant.taskdefs.Javac
+User task: source2wsdd weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD
+User task: p4add org.apache.tools.ant.taskdefs.optional.perforce.P4Add
+User task: jpcoverage org.apache.tools.ant.taskdefs.optional.sitraka.Coverage
+User task: soslabel org.apache.tools.ant.taskdefs.optional.sos.SOSLabel
+User task: depend org.apache.tools.ant.taskdefs.optional.depend.Depend
+User task: wlpackage weblogic.ant.taskdefs.build.WLPackageTask
+User task: vssget org.apache.tools.ant.taskdefs.optional.vss.MSVSSGET
+User task: deltree org.apache.tools.ant.taskdefs.Deltree
+User task: ddcreator org.apache.tools.ant.taskdefs.optional.ejb.DDCreator
+User datatype: patternset org.apache.tools.ant.types.PatternSet
+User datatype: filterset org.apache.tools.ant.types.FilterSet
+User datatype: libfileset org.apache.tools.ant.taskdefs.optional.extension.LibFileSet
+User datatype: filterreader org.apache.tools.ant.types.AntFilterReader
+User datatype: extension org.apache.tools.ant.taskdefs.optional.extension.ExtensionAdapter
+User datatype: fileset org.apache.tools.ant.types.FileSet
+User datatype: dirset org.apache.tools.ant.types.DirSet
+User datatype: filelist org.apache.tools.ant.types.FileList
+User datatype: filterchain org.apache.tools.ant.types.FilterChain
+User datatype: path org.apache.tools.ant.types.Path
+User datatype: classfileset org.apache.tools.ant.types.optional.depend.ClassfileSet
+User datatype: description org.apache.tools.ant.types.Description
+User datatype: xmlcatalog org.apache.tools.ant.types.XMLCatalog
+User datatype: selector org.apache.tools.ant.types.selectors.SelectSelector
+User datatype: mapper org.apache.tools.ant.types.Mapper
+User datatype: substitution org.apache.tools.ant.types.Substitution
+User datatype: extensionSet org.apache.tools.ant.taskdefs.optional.extension.ExtensionSet
+User datatype: regexp org.apache.tools.ant.types.RegularExpression
Setting ro project property: ant.version -> Apache Ant version 1.5.3 compiled on August 13 2003
Setting ro project property: ant.file -> C:\onexv3.x\src\antfile\osh.xml
parsing buildfile \onexv3.x\src\antfile\osh.xml with URI = file:C:/onexv3.x/src/antfile/osh.xml
Setting ro project property: ant.project.name -> osh
Adding reference: osh -> org.apache.tools.ant.Project@12ad19e
Project base dir set to: C:\onexv3.x\src\antfile
resolving systemId: file:properties.xml
+Task: property
[property] Loading Environment env.
Setting project property: env.SYSTEMROOT -> C:\WINNT
Setting project property: env.ONEX_WL_IP -> localhost
Setting project property: env.ORACLE_HOME -> /oracle/ora92
Setting project property: env.WEBROOT -> /weblogic/weblogic81/config/onexdomain-v3x/applications/onexchange
Setting project property: env.PROMPT -> $P$G
Setting project property: env.MY_PASSWORD -> qa1
Setting project property: env.JAVA_OPTIONS -> -Xverify:none
Setting project property: env.POINTBASE_TOOLS -> C:\weblogic\WEBLOG~1\common\eval\pointbase\lib\pbtools44.jar
Setting project property: env.ONEX_CONFIG -> /onexv3.x/ops/config/config_dev-v2.x.txt
Setting project property: env.PWD -> /weblogic/weblogic81/server/bin
Setting project property: env.COMPUTERNAME -> FKHAN2
Setting project property: env.JSPWD -> /weblogic/weblogic81/config/onexdomain-v3x/classfiles
Setting project property: env.MAKE_MODE -> UNIX
Setting project property: env.ALLUSERSPROFILE -> C:\Documents and Settings\All Users
Setting project property: env.h -> /onexv3.x
Setting project property: env.SERVLET_CLASSES -> /weblogic/weblogic81/config/onexdomain-v3x/servletclasses
Setting project property: env.HOMEPATH -> \Documents and Settings\fkhan
Setting project property: env.ONEX_NOTIFY -> 1
Setting project property: env.ONEX -> /onexv3.x
Setting project property: env.ONEX_TQREADER -> 1
Setting project property: env.JDK_CLASSES -> /bea/jdk141_05/lib/rt.jar
Setting project property: env._ -> ./ant.bat
Setting project property: env.EXT -> .60
Setting project property: env.SHELL -> /bin/sh
Setting project property: env.Z -> ;
Setting project property: env.X -> 1
Setting project property: env.MY_NAME -> qa1
Setting project property: env.ONEX_AUDIT -> 1
Setting project property: env.MY_DW_DB_SERVICE -> qa
Setting project property: env.PATH -> C:\weblogic\WEBLOG~1\server\bin;C:\bea\JDK141~1\jre\bin;C:\bea\JDK141~1\bin;C:\weblogic\WEBLOG~1\server\bin;C:\bea\JDK141~1\jre\bin;C:\bea\JDK141~1\bin;.;C:\onexv3.x\ops\scripts;C:\onexv3.x\scripts;C:\onexv3.x\3rdparty\ant\bin;C:\bea\jdk141_05\bin;C:\onexv3.x\scripts\singledb;C:\Oracle\Ora9\bin;C:\cygnus\CYGWIN~1\H-I586~1\bin;C:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Perforce;C:\cygwin\bin;C:\putty;C:\weblogic\WEBLOG~1\server\bin\oci920_8
Setting project property: env.MY_INSTANCE -> qa
Setting project property: env.POINTBASE_HOME -> C:\weblogic\WEBLOG~1\common\eval\pointbase
Setting project property: env.WINDIR -> C:\WINNT
Setting project property: env.ONEX_WL_HOME -> /weblogic/weblogic81
Setting project property: env.ONEX_TRADING -> 1
Setting project property: env.HOSTTYPE -> i586
Setting project property: env.J -> /onexv3.x/jars
Setting project property: env.PROCESSOR_IDENTIFIER -> x86 Family 6 Model 8 Stepping 3, GenuineIntel
Setting project property: env.JAVA_VENDOR -> Sun
Setting project property: env.TEMP -> C:\DOCUME~1\fkhan\LOCALS~1\Temp
Setting project property: env.ONEX_JAVA_HOME -> /bea/jdk141_05
SettiCan somebody tell me how to run the webservices in weblogic samples,when i run this(build.xml)i get the following error.
=========================================================Buildfile: E:\eclipse\Workspace\WS\examples\webservices\basic\javaclass\build.xml
clean:
[delete] Deleting directory E:\eclipse\Workspace\WS\examples\webservices\basic\javaclass\build
[delete] Deleting directory E:\eclipse\Workspace\WS\examples\webservices\basic\javaclass\client
compile:
[mkdir] Created dir: E:\eclipse\Workspace\WS\examples\webservices\basic\javaclass\build
[mkdir] Created dir: E:\eclipse\Workspace\WS\examples\webservices\basic\javaclass\client
[javac] Compiling 1 source file to E:\eclipse\Workspace\WS\examples\webservices\basic\javaclass\build
ear:
[servicegen] Generating service "HelloWorld" ...
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorldPort_Stub.java:9: package weblogic.webservice.core.rpc does not exist
[servicegen] extends weblogic.webservice.core.rpc.StubImpl
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorldPort_Stub.java:12: package weblogic.webservice does not exist
[servicegen] public HelloWorldPort_Stub( weblogic.webservice.Port _port ){
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorld.java:9: package javax.xml.rpc does not exist
[servicegen] public interface HelloWorld extends javax.xml.rpc.Service{
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorld.java:11: package weblogic.webservice.context does not exist
[servicegen] weblogic.webservice.context.WebServiceContext context();
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorld.java:13: package weblogic.webservice.context does not exist
[servicegen] weblogic.webservice.context.WebServiceContext joinContext()
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorld.java:14: package weblogic.webservice.context does not exist
[servicegen] throws weblogic.webservice.context.ContextNotFoundException;
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorld.java:16: package javax.xml.rpc does not exist
[servicegen] examples.webservices.basic.javaclass.HelloWorldPort getHelloWorldPort() throws javax.xml.rpc.ServiceException;
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorld.java:18: package javax.xml.rpc does not exist
[servicegen] examples.webservices.basic.javaclass.HelloWorldPort getHelloWorldPort(String username, String password) throws javax.xml.rpc.ServiceException;
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorld_Impl.java:10: package weblogic.webservice.core.rpc does not exist
[servicegen] extends weblogic.webservice.core.rpc.ServiceImpl
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorldPort_Stub.java:24: cannot resolve symbol
[servicegen] symbol : method _wrap (int)
[servicegen] location: class examples.webservices.basic.javaclass.HelloWorldPort_Stub
[servicegen] args.put( "intVal", wrap( intVal ) );
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorldPort_Stub.java:25: cannot resolve symbol
[servicegen] symbol : method _wrap (java.lang.String)
[servicegen] location: class examples.webservices.basic.javaclass.HelloWorldPort_Stub
[servicegen] args.put( "string", wrap( string ) );
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorldPort_Stub.java:27: cannot resolve symbol
[servicegen] symbol : method _invoke (java.lang.String,java.util.HashMap)
[servicegen] location: class examples.webservices.basic.javaclass.HelloWorldPort_Stub
[servicegen] java.lang.Object result = invoke( "sayHello", _args );
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorldPort_Stub.java:29: package javax.xml.rpc does not exist
[servicegen] } catch (javax.xml.rpc.JAXRPCException e) {
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorldPort_Stub.java:31: package javax.xml.rpc.soap does not exist
[servicegen] } catch (javax.xml.rpc.soap.SOAPFaultException e) {
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorld_Impl.java:9: examples.webservices.basic.javaclass.HelloWorld_Impl is not abstract and does not override abstract method joinContext() in examples.webservices.basic.javaclass.HelloWorld
[servicegen] public class HelloWorld_Impl
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorld_Impl.java:40: cannot resolve symbol
[servicegen] symbol : method _getPort (java.lang.String)
[servicegen] location: class examples.webservices.basic.javaclass.HelloWorld_Impl
[servicegen] new examples.webservices.basic.javaclass.HelloWorldPort_Stub( _getPort( "HelloWorldPort" ) );
[servicegen] ^
[servicegen] C:\Documents and Settings\ramchandra_rapolu\Local Settings\Temp\HelloWorld_javaclass_client.jar-990169626\examples\webservices\basic\javaclass\HelloWorld_Impl.java:49: cannot resolve symbol
[servicegen] symbol : method _setUser (java.lang.String,java.lang.String,examples.webservices.basic.javaclass.HelloWorldPort)
[servicegen] location: class examples.webservices.basic.javaclass.HelloWorld_Impl
[servicegen] _setUser( username, password, getHelloWorldPort() );
[servicegen] ^
[servicegen] 17 errors
[servicegen] java.io.IOException: Compiler failed executable.exec
[servicegen] at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:469)
[servicegen] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[servicegen] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[servicegen] at weblogic.webservice.tools.build.internal.CompilerHelper.compileFiles(CompilerHelper.java:80)
[servicegen] at weblogic.webservice.tools.build.internal.ClientGenImpl.compileStubs(ClientGenImpl.java:627)
[servicegen] at weblogic.webservice.tools.build.internal.ClientGenImpl.generateStub(ClientGenImpl.java:572)
[servicegen] at weblogic.webservice.tools.build.internal.ClientGenImpl.doClientGenFromEAR(ClientGenImpl.java:521)
[servicegen] at weblogic.webservice.tools.build.internal.ClientGenImpl.run(ClientGenImpl.java:345)
[servicegen] at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.generateClient(ServiceGenTask.java:597)
[servicegen] at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.execute(ServiceGenTask.java:195)
[servicegen] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[servicegen] at org.apache.tools.ant.Task.perform(Task.java:364)
[servicegen] at org.apache.tools.ant.Target.execute(Target.java:341)
[servicegen] at org.apache.tools.ant.Target.performTasks(Target.java:369)
[servicegen] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[servicegen] at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[servicegen] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[servicegen] at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
[servicegen] at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[servicegen] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
[servicegen] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)
BUILD FAILED
E:\eclipse\Workspace\WS\examples\webservices\basic\javaclass\build.xml:42: weblogic.webservice.tools.build.WSBuildException: Compiler failed executable.exec - with nested exception:
[java.io.IOException: Compiler failed executable.exec]
Total time: 29 seconds -
I have a couple of HP 8200 desktops that I think might have bad nics. When I PXE boot them and start my LiteTouch, I get a Wizard error that says
A connection to the deployment share (\\mydpshare\share) could not be made. The following networking device did not have a driver installed
PCI\VEN_8086&DEV_1502&SUBSYS_1496103C&REV_04
I have that driver in MDT and it works on other HP 8200s. Looking into the Wpeinit.log, it looks like the driver loads but maybe the nic is bad:
Installing device root\kdnic X:\WINDOWS\INF\kdnic.inf succeeded
Installing device pci\ven_8086&dev_1502 X:\WINDOWS\INF\net1ic64.inf succeeded
Spent 16903ms installing network drivers
QueryAdapterStatus: no adapters found
Spent 0ms confirming network initialization; status 0x80004005
WaitForNetworkToInitialize failed; ignoring error
Has anyone seen this before?
Orange County District AttorneyHi,
According to your description, it should be Intel NIC driver problem. I have checked HP official website, there is new NIC driver released, please access to the link below to download the NIC driver for test:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5037932&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253Dvc_111651_1%257CswEnvOID%253D4060%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
Roger Lu
TechNet Community Support -
Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine. Do I have to wait for Seagate to update their drivers for this hard drive?
I tried your suggestion, and it's been giving me the message "Preparing for Backup" for the past 8 hours. Does this mean TM is backing up my hard drive? I'll give it a few more hours, but if nothing else happens, I'm not sure what else to do. I'm not sure if there are any new external hard drives that are compatible with ML yet.
Maybe you are looking for
-
I don't think the recurring exchange calenddar events deleted fixes my issue. I have no program on my windows computer either to back up my calendar to and the icloud just suggests I download outlook 2007 (pricey). I don't want to lose any more event
-
Unable to paste frame from one animation into another
Hi, I'm currently working to make a set of GIFs. I'm using PS CS6 64-bit on a Windows 7 PC. This is my first time encountering this error. I am attempting to select a batch of frames from one animation (in the frame animation mode) then select "Copy
-
SQL developer 3.0 - Few Query Builder issues
Hi All, I have just started using SQL Developer 3.0 so have not fully browsed thru all of the available options in SQL Developer. I have been trying to work on creating and editing sql statements using Worksheet and Query Builder. I am working on to
-
FI documents without MM document
Dear Colleagues, We are in face of one, I guess, big problem. We have FI documents(RE) related to vendor invoices created via MIRO without the corresponding IR-L (logistic invoice verification). Therefore the PO's does not have the corresponding Purc
-
Aperture backup strategi - file system compatibility
Hi all, I am beginning to run out of space for a managed library so I'm starting to look for alternatives. Currently I have a managed library, with a vault on another disk on the same computer. This vault is then mirrored to another computer (Linux)