IPrint functionality gone in Linux iPrint server
We have an application that uses specific fonts that need to be
downloaded to the printer before the job prints. They are PCL fonts.
A long time ago we would capture a printer to LPT1 and then run a
program that would push the fonts to LPT1, then we'd print from the
application.
When we went to iPrint I talked to the iPrint developers and they came
up with a great idea that has served us well. They suggested creating a
print banner that was actually the font file. That way, when anyone
tried printing to one of the printers setup for the application, it
would automatically send the fonts as a banner and things worked great.
That capability is gone in the iPrint for OES Linux. You can no longer
create custom banners so we can't send the fonts. Does anyone know a
way around this? Is anything coming (maybe in OES 2) that will add the
functionality back? Or, does anyone know another way to do it?
Sean,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
Novell-iprint-server patch-11778
Hi.
I just installed patch-11778 via rug on a clustered node for the iprint
server and now I can not even start ipsmd on that node, iprint stops
with "FATAL Error (506D000C) occurred while initializing the Managed
Object database". Luckily I have not upgraded the other node in the
cluster so I can still start the iprint server there.
I searched everywhere on novell.com about this patch but could not even
find any confirmation that the patch exists. The patch info in rug
claimed to resolve the issues we have (needing to restart iprint every
couple of hours/days).
Anyone know anything more?
/andersI have just encountered the problem with the same results. Fortunately,
Novell came out with a patch that I installed via Linux Patch Manager.
The iPrint patch is Open Enterprise Server Patch 11856, released
10/16/07, and it resolved my Print Manager's inability to start.
Good Luck with yours.
Glen
> Hi again, seems noone has seen this before?
>
> Well, I kind of found a solution last night. It seems to be the
> driverprofile-database that crashes the new iprint-server. I tried to
> find out where the driverprofiles are stored and it seems that it is in
> the psmdb.dat file.
>
> I put the whole iprint server on a test system, still the same error.
> Deleted psmdb.dat and started up the iprint-server, it started just
fine
> this time and all printers and settings were left except for the
> driverprofiles.
>
> I restored the database again and reverted to the old iprint-server, I
> then removed all driverprofiles from iManager, upgraded to new
> iprint-server and it starts just fine and printing works.
>
> In our iprint production system we only have about 30 printers so I'm
> going to go with this solution, recreating the profiles is a pain but
if
> iPrint stays stable we might migrate our other 250+ printers. Hope
> someone else finds this useful.
>
> /anders
>
>
> Anders Westerberg wrote:
> > Hi.
> >
> > I just installed patch-11778 via rug on a clustered node for the
iprint
> > server and now I can not even start ipsmd on that node, iprint stops
> > with "FATAL Error (506D000C) occurred while initializing the Managed
> > Object database". Luckily I have not upgraded the other node in the
> > cluster so I can still start the iprint server there.
> >
> > I searched everywhere on novell.com about this patch but could not
even
> > find any confirmation that the patch exists. The patch info in rug
> > claimed to resolve the issues we have (needing to restart iprint every
> > couple of hours/days).
> >
> > Anyone know anything more?
> >
> > /anders -
Why READ_IMAGE_FILE is not working in Linux Appln Server?
Hello!
I have a form with a new_form_instance Trigger I wrote the read_image_file trigger to read a GIF file in an image item.It works fine on windows XP(development machine).I copied the GIF file to the same location where my fmx files are there in Linux application server.I copied and compilied my fmb file in linux application server.No compilation error is there.But when I run form from Linux the form hangs and my read_image_file command is at new form instance Trigger.I have checked the case sensitivity of the file and the permission etc in Linux.In windows Development machine the form runs successfully.What could be the problem.Please help.......
JayashreeHi
Incase if you find any server related error like "FRM-92101" happening on READ_IMAGE_FILE functionality, try to change the image item format from TIFF to BMP/JFIF.
Otherwise if you changed any Jinitiator or JRE Version, sign again for all the JAR Files and restart your server. -
Terminal Keyboard features for a Linux based Server System
Hi Forum,
there are some highlighted characters within terminal functions at a linux server (redhat or suse or ...) With Putty or a linux connection I get the special keys that are highlighted to work with the "alt" key pressed. Example is the terminal button "ok" with the "o" highlighted. If I press "alt"+"o" it would be choosen and the next page will be shown. Is there a way to make this work on a MacOSX Terminal? I had no chance to find anything similar with google. I hope you might find a solution!
Thank you and best regards,Post Unix and Terminal queries to the Unix forum under OS X Technologies where those mavens frolic.
-
File Receiver channel, Append issue on Linux FTP server
Hi,
I have a File_ReceiverChannel_FTP_Order that is using the File Content Conversion message protocol.
I have setup the adapter to use File Construction Mode Append
When I run this on a windows FTP server, it is working as designed.
But when Im trying to use our Linux FTP server the append function does not work.
My adapter does not append but it is overwriting the content of the file!
Does any one know what to do about this?Hi
i think you need to change the protocol as the linux system understand the NFS .
Thanks
sudhir sharma -
Setup FB for PHP 4.5.1 to work with linux zend server ce edition
Hi,
I'm new to FB and hope that someone can help me.
Using some tutorials I've found I have installed Zend Server CE on my windows pc and created a project which accesses a database. This is all working as I would expect in that I can introspect the services and everything works.
As the next phase in my learning I am now trying to move the Zend Server CE onto a seperate RedHat linux server so that the services are not bound to my pc which has a dynamic ip address.
I used the yum repository to install the zend server ce with php 5.3 support and this all went as expected.
I've created a new remote project using SSH to access the remote server. When I did this i noticed that the "public" folder and the amf_config.ini and gateway.php files are not automatically created as they were when I used my local pc.
Also when I create a php service and right click on it the "create php service for flex" option is not available.
I was hoping that everything would remain the same as when I used the locally installed zend server ce but it seems there is more configuration required and I'm not able to find any current tutorials which cover how to get this working from both the zend server ce side as well as the local flash builder for php settings that need to be set for the project.
Can someone point me to a tutorial on how to get flash builder for php working with a remote linux copy of zend server?
There are plenty of tutorials which cover how to do this if you install zend server locally with FB and use localhost and a local webroot....
Any help would be greatly appreciated... If I work out the steps to do this I would be more than happy to do up a youtube video of the process to help other new users.
Thanks
SteveWhat I would like to do is this.
In Flash Builder 4.5.1 for PHP I want to create a "Flex and PHP Project"
I want the PHP project to use the Zend server that I have configured on my linux server 192.168.214.212 ip address.
In the flash builder for php, php project I want to be able to create new functions and classes and then as I do this have them uploaded to the linux zend server via ssh.
I also want to be able to "Introspect" the services and have them create the Value Objects in my flex project.
Then when I debug or launch the project I want it to use the services on the linux server.
If you have zend server installed on the same windows pc (localhost) as flash builder for php all of this works automatically, it creates a public folder and also generates the gateway.php file automatically and everything works with out any manual configuration.
The problem I have is that I cant figure out how to change it so that it uses the linux server and I know it's not as easy as just changing the ipaddress of the server and uploading the files to the linux server webroot as I've already tried this and it doesn't work.
I can ping the linux server and access the zend server admin page.
I can get the flash builder php project connected to the server filesystem (via ssh) and have it upload the php as I change them.
The two things that are not working are Introspect and also the gateway.php and amf_config.ini files are not working. -
Can't Install Solution Manager on Suse Linux Enterprise Server 10 - JAVA
Hello everyone!
I've been trying to complete the pre-requisites in order to install Solution Manager SR2 on Suse Linux Enterprise Server 10 x64 - SP1.
There's only one last condition that I haven't met, and it's the Java Runtime Environment version...
I checked the recommended note 867110 and it says that i need to have installed the J2SDK 1.4.2_08.
SLES10 includes the 1.4.2_13, so I had to uninstall it, and download the right version from Sun Microsystem's official webpage.
When I installed the version 1.4.2_08, i'm not able to run SAPINST because there's no Java Runtime Environment running on the server.
I started to investigate and I found in some forums [NOT EXPLICITLY] that there's no port for J2SDK 1.4.2_08 on x64 linux systems.
I can't believe this is true because SLES10 is recommended by SAP to install Solution Manager, so I hope somebody can help me on this.
My specific question is: Does anybody know if is true that J2SDK 1.4.2_08 is NOT COMPATIBLE with x64 Linux?
In case of being true, is there any way to be able to run SAPINST ? because if I enable the version SLES brings built in, i'm able to run the SAPINST but it detects that i'm not running version 1.4.2_08 and doesn't allow me to continue installation.
I hope somebody can help me soon...
Regards!> SAPINST_JRE_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
>
> JAVA_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
You downloaded the wrong version - the one you have is for Z-Linux(Linux running on the mainframe - not for x64).
You need to download the x86_64 (or AMD64) version.
Install the correct one and try on a new console:
export JAVA_HOME=/opt/IBMJava2-amd64-142
export PATH=$JAVA_HOME/bin:$PATH
Then execute
java -fullversion
and it should show the correct version.
Markus -
Linux install server and solaris 10
Hi,
I am trying to learn Solaris as a student. I bought a SPARC (Netra T105 UltrasparcII) server on ebay which requires a network install as there is no cd-rom, or keyboard.
I only have a linux box (like I said, I'm a stingy student) to use as an install server, there is a few tutorials out there to try and do this, but none for Solaris 10. I have been hacking away at this for days, but cannot get it to install. I have the sparc server using RARP and then getting the /etc/bootparams file and downloading the boot files, but it does not get to locating the jumpstart files or the install files (I dont know if I can install from the terminal using the keyboard (without jumpstart) - I have not got that far yet).
I always get this, like it cannot find the install directory, I was wireshark on the linux boot server and see loads of NFS traffic after the TFTP download, but cannot seem to see what part it actually at. I have a detailed log at the bottom from putty. Any help greatly appreciated.Cheers
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not found
Linux box setup:
/etc/bootparams
solaris root=192.168.2.10:/home/sunos/Solaris_10/Tools/Boot rootopts=rsize=32768 boottype=:in install=192.168.2.10:/home/sunos_install/Solaris_10/Product sysid_config=192.168.2.10:/home/sunos_install/jumpstart/sysidcfg install_config=192.168.2.10:/home/sunos_install/jumpstart/jumpstart.conf
TFTP setup from /tftpboot:
[root@robert tftpboot]# ll
total 232
lrwxrwxrwx 1 root root 8 Jun 10 13:55 C0A80214 -> inetboot
-rwxrwxrwx 1 root root 221280 Jun 10 13:47 inetboot
The Openboot can get ahold of the inetboot file and downloads and it and then loads it.
The following directories are exported through NFS
[root@robert sunos_install]# cat /etc/exports
#/home/nfs 192.168.2.0/24(ro,sync)
/home/sunos *(ro,no_root_squash)
/home/sunos_install *(ro,no_root_squash)
[root@robert tftpboot]# showmount -e localhost
Export list for localhost:
/home/sunos *
/home/sunos_install *
In /home/sunos, I have:
[root@robert sunos]# tree -L 2
|-- Solaris_10
| `-- Tools
|-- boot
| |-- hsfs.bootblock
| `-- sparc.miniroot
`-- lost+found
In /home/sunos_install, I have:
[root@robert sunos_install]# tree -L 2
|-- Solaris_10
| `-- Product
|-- jumpstart
| |-- jumpstart.conf
| `-- sysidcfg
`-- lost+found
[root@robert jumpstart]# cat jumpstart.conf
install_type initial_install
system_type server
partitioning explicit
filesys any 2000 /
filesys any 1500 swap
filesys any 1500 /var
filesys any 2000 /opt
geo N_America
cluster SUNWCreq
package SUNWgzip add
package SUNWless add
package SUNWman add
package SUNWbash add
package SUNWtcsh add
package SUNWzsh add
[root@robert jumpstart]# cat sysidcfg
system_locale=en_US
timezone=US/Pacific
terminal=xterms
name_service=NONE
timeserver=pool.ntp.org
security_policy=NONE
root_password=xxxx
network_interface=primary
{ hostname=js-test
ip_address=192.168.2.20
netmask=255.255.255.0
protocol_ipv6=yes}
Putty log file from console:
root server: 192.168.2.10 (192.168.2.10)
root directory: /home/sunos/Solaris_10/Tools/Boot
module /platform/sun4u/kernel/sparcv9/unix: text at [0x1000000, 0x10a096d] data at 0x1800000
module /platform/sun4u/kernel/sparcv9/genunix: text at [0x10a0970, 0x12615bf] data at 0x1867cc0
module /platform/sun4u/kernel/misc/sparcv9/platmod: text at [0x12615c0, 0x12615c7] data at 0x18bdf80
module /platform/sun4u/kernel/cpu/sparcv9/SUNW,UltraSPARC-IIi: text at [0x1261600, 0x126da07] data at 0x18be680
SunOS Release 5.10 Version Generic_139555-08 64-bit
Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
\|/Ethernet address = 8:0:20:c2:1b:b4
-Using default device instance data
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/mem = 1048576K (0x40000000)
avail mem = 846602240
root nexus = Netra t1 (UltraSPARC-IIi 440MHz)
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
ramdisk0 at root
ramdisk0 is /ramdisk-root
root on /ramdisk-root:a fstype ufs
pseudo-device: dld0
dld0 is /pseudo/dld@0
pcipsy0 at root: UPA 0x1f 0x0
pcipsy0 is /pci@1f,0
PCI-device: pci@1,1, simba0
simba0 is /pci@1f,0/pci@1,1
SUNW,hme0 : PCI IO 2.0 (Rev Id = c1) Found
SUNW,hme0 : Local Ethernet address = 8:0:20:c2:1b:b4
PCI-device: network@1,1, hme0
hme0 is /pci@1f,0/pci@1,1/network@1,1
SUNW,hme1 : PCI IO 2.0 (Rev Id = c1) Found
SUNW,hme1 : Local Ethernet address = 8:0:20:c2:1b:b5
PCI-device: network@3,1, hme1
hme1 is /pci@1f,0/pci@1,1/network@3,1
PCI-device: ebus@1, ebus0
ebus0 is /pci@1f,0/pci@1,1/ebus@1
su0 at ebus0: offset 14,3803f8
su0 is /pci@1f,0/pci@1,1/ebus@1/su@14,3803f8
cpu0: UltraSPARC-IIi (portid 0 impl 0x12 ver 0x91 clock 440 MHz)
iscsi0 at root
iscsi0 is /iscsi
|pseudo-device: zfs0
zfs0 is /pseudo/zfs@0
Configuring devices.
/pseudo-device: devinfo0
devinfo0 is /pseudo/devinfo@0
PCI-device: pci@1, simba1
simba1 is /pci@1f,0/pci@1
pseudo-device: pseudo1
pseudo1 is /pseudo/zconsnex@1
/pci@1f,0/pci@1,1/network@1,1 (hme0) online
/pci@1f,0/pci@1,1/scsi@2 (glm0):
Rev. 3 Symbios 53c875 found.
PCI-device: scsi@2, glm0
glm0 is /pci@1f,0/pci@1,1/scsi@2
PCI-device: pci@1, pci_pci0
pci_pci0 is /pci@1f,0/pci@1/pci@1
su1 at ebus0: offset 14,3602f8
su1 is /pci@1f,0/pci@1,1/ebus@1/su@14,3602f8
ecpp0 at ebus0: offset 14,340278
ecpp0 is /pci@1f,0/pci@1,1/ebus@1/ecpp@14,340278
pseudo-device: fssnap0
fssnap0 is /pseudo/fssnap@0
pseudo-device: ramdisk1024
ramdisk1024 is /pseudo/ramdisk@1024
sd0 at glm0: target 1 lun 0
sd0 is /pci@1f,0/pci@1,1/scsi@2/sd@1,0
pseudo-device: winlock0
winlock0 is /pseudo/winlock@0
pseudo-device: llc10
llc10 is /pseudo/llc1@0
pseudo-device: lofi0
lofi0 is /pseudo/lofi@0
pseudo-device: fcp0
fcp0 is /pseudo/fcp@0
pseudo-device: fcsm0
fcsm0 is /pseudo/fcsm@0
pseudo-device: trapstat0
trapstat0 is /pseudo/trapstat@0
pseudo-device: pool0
pool0 is /pseudo/pool@0
pseudo-device: mem_cache0
mem_cache0 is /pseudo/mem_cache@0
pseudo-device: fcode0
fcode0 is /pseudo/fcode@0
-\i2c0 at ebus0: offset 14,600000
i2c1 at ebus0: offset 14,100000
i2cadc0 at i2c0: reg=0x0:0x9E, name=bus,address="0,9e"
i2cadc0 is /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000/adc@0,9e
i2cgpio0 at i2c0: reg=0x0:0x70, name=bus,address="0,70"
i2cgpio0 is /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000/gpio@0,70
i2cgpio1 at i2c0: reg=0x0:0x72, name=bus,address="0,72"
i2cgpio1 is /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000/gpio@0,72
|/-\|/-\|/-Using RPC Bootparams for network configuration information.
Attempting to configure interface hme1...
\|/-\|/-WARNING: hme1: fault detected in device; service degraded
WARNING: hme1: No response from Ethernet network : Link down -- cable problem?
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Skipped interface hme1
Attempting to configure interface hme0...
Configured interface hme0
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not foundrmcnaught48 wrote:
Hi,
I am trying to learn Solaris as a student. I bought a SPARC (Netra T105 UltrasparcII) server on ebay which requires a network install as there is no cd-rom, or keyboard.
I only have a linux box (like I said, I'm a stingy student) to use as an install server, there is a few tutorials out there to try and do this, but none for Solaris 10. I have been hacking away at this for days, but cannot get it to install. I have the sparc server using RARP and then getting the /etc/bootparams file and downloading the boot files, but it does not get to locating the jumpstart files or the install files (I dont know if I can install from the terminal using the keyboard (without jumpstart) - I have not got that far yet).You can install using the keyboard with jumpstart. Without jumpstart you'd need local media (you can't enter the OS via the keyboard).
I always get this, like it cannot find the install directory, I was wireshark on the linux boot server and see loads of NFS traffic after the TFTP download, but cannot seem to see what part it actually at. I have a detailed log at the bottom from putty. Any help greatly appreciated.Cheers
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not foundHmm. That looks like the image file is corrupt. Can you pull the image from media again? Can you see if there's a /sbin/install-discovery file in the image (usually under Tools/Boot/root). I recall there used to be a problem with that file.
Linux box setup:
/etc/bootparams
solaris root=192.168.2.10:/home/sunos/Solaris_10/Tools/Boot rootopts=rsize=32768 boottype=:in install=192.168.2.10:/home/sunos_install/Solaris_10/Product sysid_config=192.168.2.10:/home/sunos_install/jumpstart/sysidcfg install_config=192.168.2.10:/home/sunos_install/jumpstart/jumpstart.confIf you just want an interactive install (prompt for configuration/settings), you don't need sysid_config or install_config. Those are for automated installations.
TFTP setup from /tftpboot:
[root@robert tftpboot]# ll
total 232
lrwxrwxrwx 1 root root 8 Jun 10 13:55 C0A80214 -> inetboot
-rwxrwxrwx 1 root root 221280 Jun 10 13:47 inetboot
The Openboot can get ahold of the inetboot file and downloads and it and then loads it.
The following directories are exported through NFS
[root@robert sunos_install]# cat /etc/exports
#/home/nfs 192.168.2.0/24(ro,sync)
/home/sunos *(ro,no_root_squash)
/home/sunos_install *(ro,no_root_squash)
[root@robert tftpboot]# showmount -e localhost
Export list for localhost:
/home/sunos *
/home/sunos_install *That looks pretty good.
You do have the option of running VMware on linux, and putting a Solaris 10 image on it, then using that VM as your boot server. But the problem you're displaying doesn't appear to be related to the linux server.
Darren -
Installing Oracle 8.1.7 on Red Hat Linux Advanced Server 2.1
Hello,
how the subject says I'd like to install Oracle 8.1.7 on Red Hat Linux Advanced Server 2.1. Can anybody of you say me where to find a good HOWTO/Documentation?? It would be nice if you help me!
KonstantinThis install is not on a Pentium 4
I'm trying to install on pentium III
Memory 512Mo
Hard Disk 20 Go
Thanks again -
How to install Oracle 10g on to Red Hat Linux 5 Server
I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
ThanksUnfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid. -
Where is the activity function gone? in version 6 Safari
Where is the activity function gone? in version 6 Safari. I may have updated from a previous version around the beginning of August 2012.
I came to use this function only to find it missing??Safari 6
Apple removed Activity Window in Safari 6.
Best. -
Read_image_file command does works on Linux application server
Hello!
I have a form with a new_form_instance Trigger I wrote the read_image_file trigger to read a GIF file in an image item.It works fine on windows XP(development machine).I copied the GIF file to the same location where my fmx files are there in Linux application server.I copied and compilied my fmb file in linux application server.No compilation error is there.But when I run form from Linux the form hangs and my read_image_file command is at new form instance Trigger.I have checked the case sensitivity of the file and the permission etc in Linux.In windows Development machine the form runs successfully.What could be the problem.Please help.......
JayashreeFor me, attempting the following:
READ_IMAGE_FILE('bullet_ball_glass_blue.gif', 'GIF', 'IMAGE7');
gives this error:
FRM-47109: Cannot locate image file bullet_ball_glass_blue.gif
Changing my command to:
READ_IMAGE_FILE('bullet_ball_glass_blue.gif', 'URL', 'IMAGE7');
loads the image successfully.
If you truly are not getting an error message (mine appears in the status bar), then perhaps the file is being found, but the image format is not recognized or otherwise incompatible. Test this by loading one of the the images that load successfully into your iconic buttons. If that image loads successfully into your image item, fix the problem GIF image. (Recreate or open & resave with a graphics program, etc.)
If this does not appear to be the problem, the only things I can think of are for you to confirm that, in formsweb.cfg:
1. The archive_jini entry includes your image JAR
2. If imageBase=DocumentBase, change to imageBase=codebase
The second change may temporarily break your iconic buttons. This can be fixed by updating the buttons' Iconic Filename properties specifying only relative paths found within the JAR. Since my image is stored in the root of my JAR, no path need be specified. Had I placed my image in a subdirectory within my JAR, named images, my call would have to be changed to the following:
READ_IMAGE_FILE('images/bullet_ball_glass_blue.gif', 'URL', 'IMAGE7');
I'm not sure whether any of these suggestions will help, but since I had no problems, I suspect it's simply a matter of differing configurations. The two items that I listed are the only two likely differences I could think of.
Eric Adamson
Lansing, Michigan -
Problems compiling and running 9i forms on 10g Linux app server
Hi all,
we are about to move our 9i developed forms application from W2k 9ias RL2 to a 10g linux application server. It seems that we are having very much trouble with the fact that file names are case-sensitive under linux. Our forms are designer-generated and afterwards modified using forms developer under win2k. Therefore these forms have designer plls attached (OFG*.pll). In addition, we use a few custom plls and an object library (*.olb). We managed to compile our fmbs to fmx using f90genm.sh on linux, but getting FRM-40735 and ORA-06508 errors at runtime. FORMS90_PATH in default.env is correct.
We took one fmb to narrow things down. Steps we took on development machine:
- Rename all plls to a format of uppercase name and lowercase extension (e.g. OFGBSL.pll)
- Reattach plls to the form
After that
- Move fmb and plls to linux machine
- compile the fmb without errors
At runtime, we get a ORA-06508 in a trigger that calls CGFK$LKUP_QRY.EXTEND_WHERE. This procedure is located in OFGTEL.pll. OFGTEL.pll has OFGMES.pll attached. We tried to compile OFGTEL.pll, but getting errors due to the fact that table CG_REF_CODES is not present in our db (we don't use it).
Other plls like OFGBSL.pll and our custom pll work well (proved by debugging).
Can anybody give us some hints or step-by-step instructions on how to move our application to linux, especially how to make OFGTEL.pll usable?
Thanks in advance
Gerald KriegerHere is a part of code from OFGTEL.pll
IF (curr_value IS NOT NULL) THEN
SELECT decode(RV_HIGH_VALUE, NULL, RV_LOW_VALUE, curr_value)
, RV_MEANING
INTO new_value
, P_MEANING
FROM CG_REF_CODES
WHERE ( (RV_HIGH_VALUE IS NULL AND
/* this will compare them as chars, as the */
/* abbreviation will most often be a char */
curr_value IN (RV_LOW_VALUE, RV_ABBREVIATION)) OR
(to_number(curr_value) BETWEEN
to_number(RV_LOW_VALUE) AND to_number(RV_HIGH_VALUE))
AND ROWNUM = 1
i think the unix .pll and Win .pll are not the same -
Connect Win Server 2008 R2 AD to linux ldap server
I have the need to do the opposite of what I am finding most users doing. Instead of connecting a remote linux ldap client to a windows server 2008 Active Directory server I need to connect my windows server AD to my linux ldap server. Once this connection
has been established I need for a user to be able to log in to the windows server and have their home directory on the linux box be mounted and available for the user to access their home directory and files.
I have also heard there might need to be some changes done on the ldap schema on the linux server to satisfy the windows AD. Is this true?
Does anyone have any information on how to configure the windows server (2008 R2) to do this? I am under the gun, time-wise, to get this implemented and working correctly. Any help would be GREATLY appreciated.Hello,
please ask in your Linux LDAP forums to get these details.
If you have an AD question then please ask it here.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft Student
Partner 2010 / 2011
Microsoft Certified Professional
Microsoft Certified Systems Administrator:
Security
Microsoft Certified Systems Engineer:
Security
Microsoft Certified Technology Specialist:
Windows Server 2008 Active Directory, Configuration
Microsoft Certified Technology Specialist:
Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified Technology Specialist:
Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified Technology Specialist:
Windows 7, Configuring
Microsoft Certified IT Professional: Enterprise
Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer -
Install Oracle 10g on Suse Linux Enterprise Server 10
Will 10g install on Suse Linux Enterprise Server 10? If so, what setting do I need to change to get it to install?
Yes, it will install. Oracle supports it.Apparently they forgot to tell support. Certify still holds at SLES 9.
http://www.oracle.com/technology/support/metalink/index.html
It's possible to make it work. However, I usually watch http://www.novell.com/products/server/oracle/matrix.html for info.
Maybe you are looking for
-
Hello folks, I am facing an odd issue here with a Dashboard Report in PowerView. The task is to display, in a table, a percentage of total (revenue) by any filter that the client wants. For instance, if the client selects the year (to be short) 2013,
-
Hi- I'm working with some HDV media in a ProRes 422 HQ sequence and while the picture looks great on my computer but when spitting it out via my Canopus box to a TV I'm getting a horrible looking picture (my final output will be DVD). Looks like inte
-
Software Update Does Not Appear to Work
I currently have v4.2.1 iOS on my iPhone 4. Today I see an iOS update for v4.2.6 yet when I go to update it tells me that I have the most current iOS. I would love to know more about v4.2.6 and if it's meant for my iPhone. Thanks
-
unable to connect to server when trying to update software. I also cannot purchase and download any songs. When i hit the buy button nothing happens. I did buy and download songs in mid sept, dont know why this happen thanks Jim
-
Reading the PDF from BC about Pricing and I want some clarification. There was a footnote that the webBasic and webBasic+ web forms are "Form to Email" What exactly is the difference between the web forms in the basic plan and the higher plan?