IPrint Migration - Printers and Clients Not on Welcome Page
We just finished a test migration of one of our iPrint servers from Netware 6.5SP8 to OES 11SP1. Everything went well, the driver store and manager are up and working, all the printers migrated, and all the drivers seem to be there. The one annoying issue is that the client download links and the install printers links did not get added to the Client Software tab on the default OES home page. I restarted all the services, but they still do not show up. If I type in the client download link manually, I can download it. I can also access the printers page directly at server/ipp. What do I need to do to get those links to appear?
Thanks,
Jason
On 02/11/2013 11:16 PM, jmlester wrote:
>
> We just finished a test migration of one of our iPrint servers from
> Netware 6.5SP8 to OES 11SP1. Everything went well, the driver store and
> manager are up and working, all the printers migrated, and all the
> drivers seem to be there. The one annoying issue is that the client
> download links and the install printers links did not get added to the
> Client Software tab on the default OES home page. I restarted all the
> services, but they still do not show up. If I type in the client
> download link manually, I can download it. I can also access the
> printers page directly at server/ipp. What do I need to do to get those
> links to appear?
>
> Thanks,
> Jason
>
>
Being in the welcome page, client software tab, if you check the source
of the html page or the javascript on the page, you should see a
http://servername/welcome/links/iprint.js.
If not, the migration did not copied the file. If it is, check it is the
one from oes11 and not from netware. Installing latest oes11sp1 iprint
modules should restore the good iprint.js.
Similar Messages
-
Hi to the Mac Folks,
I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
I primarily print photos from Photoshop CS5. The term Page Set-up has gone missing in the file pull down menu. Can't make any choices There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
Preview has no "Page Setup" - or does it?
Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
WoodyHey,
if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders. You can then navigate all the contents as normal.
HTH,
S. -
I installed safari 8.0.1 and now my mac is really really slow and will not open some pages. Can I uninstall?
Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
If you're running OS X 10.9 or later, select the Advanced tab in the Preferences window and uncheck the box marked
Stop plug-ins to save power
Any change?
Quit and relaunch the browser. Any change?
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Enable Private Browsing in the Safari menu. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If Parental Controls is active for any user, please turn it off and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Open the iCloud preference pane and uncheck the box marked Photos, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference? -
Firefox "hangs" when opened and will not load first page
I am running Firefox on Mac OS X and when I open it it hangs and does not load the first page. The whole application does not respond so I can't open it in safe mode or anything. I have to keep force quitting it.
So no help from any one about this?
-
WebKit2WebProcess.exe quits several times and does not open web page.
Steps to Reproduce:
1. Setup latest Safari on Windows XP (Safari 5.1.7 for Windows).
2. Visit to http://www.navyfield.com.
Actual Result:
Safari does not open web page. WebKit2WebProcess.exe quits several times while open web page. drwtsn32 reports a log (can attach log).Safari for Windows is unsupported and obsolete, and should not be used.
-
Two printers and one not being found
I've just downloaded HP Remote and it's unable to find one of my printers, the laserjet one although it's is connected to my wireless, for it prints using that one when I use ePrint.... and ePrint can detect both of my printers. Tried everything but nothing seems to work.
Hello Mcunha,
Welcome to the HP Support Forums!
I see that you are looking to use the HP All-in-One Remote App, however, it will not find one of your printers. I have a few question to ask that will better allow me to assist you.
What is the model of LaserJet?
What is the App installed on, Apple or Android? Also, what is the version?
What are some of the troubleshooting steps you tried?
Try, if you have not already, power cycling the printer, network and device the App is installed on. Allow 1 minute to pass, apply power to router first, once on, power others up and try looking for the printer.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
IPrint migration - Broker and Manager compatibility?
I didn't see this in the docs, but let's say I have one iPrint broker and 2 iPrint managers on 3 diff. servers in NetWare.
I wish to migrate to OES2 SP2 Linux, but do not wish to migrate ALL the iPrint broker/managers on one night
Can I just migrate the MANAGER first? Or must I migrate the BROKER first?
In other words:
Can an OES2 SP2 Manager "talk/work" with a NetWare iPrint Broker?Originally Posted by kjhurni
I didn't see this in the docs, but let's say I have one iPrint broker and 2 iPrint managers on 3 diff. servers in NetWare.
I wish to migrate to OES2 SP2 Linux, but do not wish to migrate ALL the iPrint broker/managers on one night
Can I just migrate the MANAGER first? Or must I migrate the BROKER first?
In other words:
Can an OES2 SP2 Manager "talk/work" with a NetWare iPrint Broker?
I don't think it can, it will need a driver store. That being said I have never tried. I'm guessing it will fail to load as the OES2 iprint manager should be configured to only connect driver store objects. -
WLC cannot get IP of the Wireless Clients and client not able to ping to the gateway
Dear Cisco Expertise,
I have configured WLC embedded in Cisco C3650 switch and also 1 unit AP3702I. AP now able to join to the controller. My client able to connect to the AP and get the IP address (10.127.117.1) from the DHCP server but unable to ping to the gateway (10.127.117.254 - interface gateway). Both switch and AP able to ping to the interface gateway. I also trying to ping to the client from the switch and also from the AP to the client but not able to ping.
I've check via switch can see the client's IP address and MAC address (using ARP)
#sh arp vlan 77
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.127.117.1 0 843a.4b90.17e0 ARPA Vlan77
Internet 10.127.117.254 - 3c08.f6b7.2173 ARPA Vlan77
Need your expertise on this matter. Thank you.
Configuration as below:
Switch
ip dhcp pool LWAPP_VLAN
network 10.127.117.0 255.255.255.0
default-router 10.127.117.254
dns-server 10.127.113.10
domain-name xxx.com
vlan 77
name LWAP_VLAN
interface Vlan10
ip address 10.127.112.254 255.255.255.128
interface Vlan77
ip address 10.127.117.254 255.255.255.0
ip helper-address 10.127.117.254
interface GigabitEthernet3/0/5
description Connect to AP Test
switchport access vlan 10
switchport mode access
no logging event link-status
wireless mobility controller
wireless management interface Vlan10
wireless security web-auth retries 5
wireless mgmt-via-wireless
wlan APAC-WLAN 2 Wifi-Test
client vlan LWAP_VLAN
ip dhcp opt82
ip dhcp opt82 ascii
ip dhcp opt82 format add-ssid
ip dhcp required
ip dhcp server 10.127.117.254
no security wpa akm dot1x
security wpa akm psk set-key ascii 0 B*MY2014
security wpa wpa2 ciphers tkip
session-timeout 300
no shutdown
ap group APGroup-Test
description "For Testing Purposes"
wlan APAC-WLAN
vlan LWAP_VLAN
AP
interface Dot11Radio0
antenna gain 0
stbc
mbssid
power client local
packet retries 64 drop-packet
station-role root
interface Dot11Radio1
antenna gain 0
stbc
mbssid
power client local
packet retries 64 drop-packet
station-role root
interface GigabitEthernet0
duplex auto
speed auto
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface BVI1
mtu 1792
ip address 10.127.112.202 255.255.255.128
interface Virtual-WLAN0
ip default-gateway 10.127.112.254
ip forward-protocol nd
ip dns serverPls try the below SSID configuration. WPA2 to be configured with AES & not TKIP.
wlan APAC-WLAN 2 Wifi-Test
client vlan LWAP_VLAN
security wpa
no security wpa akm dot1x
security wpa wpa2 ciphers aes
security wpa akm psk set-key ascii 0 B*MY2014
ip dhcp required
no shutdown
This post should give you some help as well
http://mrncciew.com/2013/12/04/wlan-config-in-3850-part-1/
HTH
Rasika
**** Pls rate all useful responses **** -
Renewed GCU a month ago and have not received welcome packet.
I renewed my GCU membership on 9/28. To date, I still have not received the welcome packet coupons.
Hi klimb22,
Thanks for your continued interest in the Gamers' Club program! It typically only takes 2-3 business days for welcome packets to arrive via e-mail, so you should have received yours by now if you renewed back in late September.
I've sent you some information, so please make sure to check your private messages when you get the chance to do so.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message -
HP SELLS DEFECTIVE PRINTERS AND WILL NOT REPAIR or LOOK AT THEIR DEFECTIVE PRODUCTS
I purchased an OfficeJet Pro K5400 and liked how fast it printed. I bought several to use at home, office, and college student. I kept an extra one, unopened, in the box. Anotther printer I was using stopped working. I opened the NEW
OfficeJet Pro K5400. It was carefully set up. The PRINTER NEVER WORKED!
THOUGH THE PRINTER WAS NOT OPENED UNTIL I TRIED TO INSTALL IT HP WOULD NOT EVEN OFFER TO LOOK AT IT TO FIND OUT ITS DEFECT.
I JUST PURCHASED an EPSON.Tthe warranty starts on the date of purchase. It doesn't matter when you actually open the box for the first time, the purchase date is what HP Support must follow for warranty entitlement.
While I am an HP employee, I am not a expert on all our products. If I offer advice, I'm not speaking for HP on how to solve an issue, but I'll do my personal best to help you. -
Printers and scanner not compatable with Mini w/Lion?
I've just had my Mini running Lion for a few days and am impressed with it (my first Mac). However I have been trying in vain to load printer drivers for my Epson R800 printer and my Epson V500 scanner. I have visited both this site and Epson's but have not had any success getting any to work. Basically I'm informed that they are not supported. Any help for a new Mac person will be greatly appreciated.
Thanks, Gusgusto2 wrote:
I have visited both this site and Epson's but have not had any success getting any to work. Basically I'm informed that they are not supported.
According to Epson's site both are supported in Lion.
EDIT: Hmmm, that link doesn't always load the article so click on the link on the RH side of the page. -
It thinks there is no information there! If I revert to 3.6 how long will security be maintained. At the moment I am opening Mozilla for web browsing but IE for my email account. I am not very PC literate so need simple answers.
Apparently TalkTalk mail will work with Firefox 4 and Firefox 5 ''if'' you set the browser to ''lie'' to TalkTalk mail by saying that you are still using version 3.6.
You can find the instructions for that in a post on the TalkTalk forums: [http://www.talktalk.co.uk/forums/showthread.php?t=185113#post2452787 Firefox 4 & TalkTalk webmail - Forums].
Note: when you open about:config the first time, it will display a warning message that you should be careful with the changes you make. That's definitely good to bear in mind.
Does it work? -
Integrating Google Maps in Oracle Apex and 404 Not found error page
Currently using APEX version 3.2.0.00.27 installed in OracleXE version 10.2.0.1.0. Have been attempting to recreate some examples of Google Maps within APEX. Found a nice set of examples here that build up to what I'm looking to ultimately do by incorporating google maps into APEX:
http://blog.whitehorses.nl/2009/10/04/integrating-google-maps-in-oracle-apex/
Unfortunatly, I'm getting the "404 Not Found, Not found, The requested URL /apex/wwv_flow.accept was not found on this server" page when I try to recreate the "Map with Search" example. I'd like to see if this really works using the html input and button tags in the body/region source versus creating APEX items to pass the address values to the javascript in the html header of the apex page. I'm thinking it's just an html thing within APEX that you have to do it a certain way, but I haven't managed to hit that magic combination. have gone to the google maps api v2 and looked at the html they use (it's what these examples with apex are based on) and tried that just to see. Same 404 result.
I've seen suggestions at this forum and elsewhere that the 404 error is due to a bug. have been to metalink, and really haven't seen anything that spells out what the bug is and how to patch it or work around it. May be I just haven't found the right note/doc yet. have seen suggestions to change something associated with the Anonymous account that APEX uses. Have turned on authentication in the application to use an APEX user account with a logon page to the application. Still get the 404. Although, I have not adjusted anything elsewhere, like a DADS config file, because the apex/xe configuration is using the plsql gateway. Not sure of any procedure for changing settings on anonymous account when using plsql gateway.
Open to suggestions. APEX 3.2 is customer version, so going to 4 may not be an option yet. XE, on the other hand, can certainly be swapped for an 11g version standard or enterprise edition if need be. I don't think this is a db version problem though. I think it's more on the APEX side of things.
Anyway, any help or suggestions are appreciated.
thanks
rtp
Edited by: RTP on Jun 24, 2011 10:30 AMHi I have the same problem.... if you found the solution, please put it here to see it... I need a solution to this its urgent!!
Thanks!! -
on the search bar far right where you can book mark the page to the right of this it is red and x'd out. so if there is some help great. fully unintalled firefox 4 b10, including removing the directories where program resided. rebooted computer, reinstalled it and still did the same thing.
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.
If that did not help;
Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode; Free Online Encyclopedia]''' -
When I click to open firefox it just goes to the tool bar and does not open the page
about 2 weeks ago firefox stopped working;- i click to open and it does not open as a page it just sits in the toolbar on the left side
See:
* [[Firefox is already running but is not responding]]
* http://kb.mozillazine.org/Profile_in_use
Maybe you are looking for
-
Confirmation of goods with "Approved" Status
Hi All, We are at SRM7.0 and working on extended classic. After performing confirmation of goods receipt in SRM, the status is still showing as "approved" and not "posted in backend". Kindly let us know how to reprocess these confirmations in SRM sys
-
Hello All, I had posted a thread yesterday to create a characteristic value to populate current calendar month/year.. i received a reply for the same and have written the following code for it... data: l_s_range like E_T_RANGE, mo type i
-
Hyperion Enterprise web error message
Hi, I am using Hyperion Enterprise 6.5 version, When i tried to enable web version of Hyperion enterprise web by browsing http:\\localhost\Heweb from the server Server Error in '/HEWeb' Application. Module not found:he.hecontainer Object variable or
-
Purchase Price Variance Report - incorrect calculation
Good afternoon all, As a relative new comer to Oracle I'm after some help/advice. When running a PPV report I'm not convinced the report is returning the correct answer. The report seems to be calculating the PPV as Qty x PO Price. It should be Qty x
-
Solution to execute sql from mysql application logs
We have some custom mysql application, which generate logs that are stored on common location on open linux box which has below format $ cat minor20100809.log 20100809001^Aselect count(prod_id) from product_logs; 20100809002^Aselect count(order_id) f